fixed euclid issue

Merge branch 'master' into functional-dev
removed Functional alias to CalcEnergy, and removed comment about prolongate
2020-02-26 14:15:38 -05:00 · 2019-12-19 15:08:07 -05:00 · 2019-08-30 15:27:32 -04:00 · 2019-08-22 15:46:01 -04:00
687 changed files with 32493 additions and 202428 deletions
@@ -15,10 +15,8 @@ install:
 - msmpisdk.msi /passive
 - set PATH=C:\Program Files\Microsoft MPI\Bin;%PATH%

-# Install METIS, use a mirror because the original source server is not always
-# up. Original url:
-#    http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/metis-5.1.0.tar.gz
- ps: Start-FileDownload 'https://mfem.github.io/tpls/metis-5.1.0.tar.gz'
+# Install METIS
+- ps: Start-FileDownload 'http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/metis-5.1.0.tar.gz'
 - 7z x metis-5.1.0.tar.gz -so | 7z x -si -ttar > nul
 - cd metis-5.1.0
 - ps: ( get-content "GKlib\gk_arch.h") | % { If ($_.ReadCount -ge 52) {$_ -replace "#ifdef __MSC__","#ifdef DISABLE_THIS_ANCIENT_MSC_CHECK"} Else {$_} } | set-content "GKlib\gk_arch.h"
@@ -28,24 +26,25 @@ install:
 - cd ..

 # Install hypre
- ps: Start-FileDownload 'https://github.com/hypre-space/hypre/archive/v2.19.0.tar.gz'
- 7z x v2.19.0.tar.gz -so | 7z x -si -ttar > nul
- cd hypre-2.19.0/src
- cmake -H. -Bbuild -DMPI_C_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include" -DMPI_C_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include"
+- ps: Start-FileDownload 'https://github.com/hypre-space/hypre/archive/V2-10-0b.tar.gz'
+- 7z x V2-10-0b.tar.gz -so | 7z x -si -ttar > nul
+- cd hypre-2-10-0b
+- cmake -H. -Bbuild -DHYPRE_USING_FEI=OFF -DMPI_C_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include" -DMPI_C_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include"
 - cmake --build build
 - cmake --build build --target install
- cd ../..
+- cd ..

 # MFEM
 before_build:
- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DMPI_CXX_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include" -DHYPRE_DIR=%cd%\hypre-2.19.0\src\hypre -DMETIS_LIBRARIES=%cd%\metis-5.1.0\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%cd%\metis-5.1.0\include
+- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DMPI_CXX_LIBRARIES="C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x86\msmpi.lib" -DMPI_CXX_INCLUDE_PATH="C:\Program Files (x86)\Microsoft SDKs\MPI\Include" -DHYPRE_LIBRARIES=%cd%\hypre-2-10-0b\hypre\lib\HYPRE.lib -DHYPRE_INCLUDE_DIRS=%cd%\hypre-2-10-0b\hypre\include -DHYPRE_VERSION=21000 -DMETIS_LIBRARIES=%cd%\metis-5.1.0\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%cd%\metis-5.1.0\include
 - cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_serial -DMFEM_USE_MPI=FALSE

 build_script:
- cmake --build build_parallel --config Release -j 4
- cmake --build build_serial --config Release -j 4
- cmake --build build_serial --target exec --config Release -j 4
+- cmake --build build_parallel
+- cmake --build build_serial
+- cmake --build build_serial --target exec

 after_build:
- cd build_serial
- ctest -C Release --output-on-failure
+# - cmake --build build_parallel --target check
+- cmake --build build_serial --target RUN_TESTS
+
@@ -1,61 +0,0 @@
-# Configuration for probot-stale - https://github.com/probot/stale
-
-# Number of days of inactivity before an Issue or Pull Request becomes stale
-daysUntilStale: 30
-
-# Number of days of inactivity before an Issue or Pull Request with the stale
-# label is closed.  Set to false to disable. If disabled, issues still need to
-# be closed manually, but will remain marked as stale.
-daysUntilClose: 7
-
-# Only issues or pull requests with all of these labels are check if stale.
-# Defaults to `[]` (disabled)
-onlyLabels: []
-
-# Issues or Pull Requests with these labels will never be considered stale. Set
-# to `[]` to disable
-exemptLabels:
-  - bug
-  - WIP
-  - ready-for-review
-  - in-review
-  - in-next
-
-# Set to true to ignore issues in a project (defaults to false)
-exemptProjects: false
-
-# Set to true to ignore issues in a milestone (defaults to false)
-exemptMilestones: false
-
-# Set to true to ignore issues with an assignee (defaults to false)
-exemptAssignees: false
-
-# Label to use when marking an issue as stale
-staleLabel: stale
-
-# Comment to post when marking an issue as stale. Set to `false` to disable
-markComment: >
-  :warning: This issue or PR has been automatically marked as stale because it has not
-  had any activity in the last month. *If no activity occurs in the next week, it will
-  be automatically closed.* Thank you for your contributions.
-
-# Comment to post when closing a stale issue. Set to `false` to disable
-closeComment: false
-
-# Limit the number of actions per hour, from 1-30. Default is 30
-limitPerRun: 30
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
-# pulls:
-#   daysUntilStale: 30
-#   markComment: >
-#     This pull request has been automatically marked as stale because it has not had
-#     recent activity. It will be closed if no further activity occurs. Thank you
-#     for your contributions.
-
-# issues:
-#   exemptLabels:
-#     - confirmed
@@ -9,7 +9,6 @@
 # Object and library files
 *.o
 /libmfem.*
-/miniapps/common/libmfem-common.*

 # CMake generated files
 CMakeCache.txt
@@ -29,8 +28,6 @@ config/sample-runs-build.log
 doc/CodeDocumentation.conf
 doc/CodeDocumentation.html
 doc/CodeDocumentation
-doc/undoc.log
-doc/warnings.log

 # Temporary files created by the tests.
 *.stderr
@@ -56,7 +53,6 @@ examples/displaced.mesh
 examples/mesh.*
 examples/ex5.mesh
 examples/Example5*
-examples/ParaView
 examples/Example9*
 examples/Example15*
 examples/Example16*
@@ -64,8 +60,6 @@ examples/sphere_refined.*
 examples/sol.*
 examples/sol_u.*
 examples/sol_p.*
-examples/sol_r.*
-examples/sol_i.*
 examples/ex9.mesh
 examples/ex9-mesh.*
 examples/ex9-init.*
@@ -74,10 +68,6 @@ examples/deformed.*
 examples/velocity.*
 examples/elastic_energy.*
 examples/mode_*
-examples/ex5-p-*.bp
-examples/ex9-p-*.bp
-examples/ex12-p-*.bp
-examples/ex16-p-*.bp
 examples/ex16.mesh
 examples/ex16-mesh.*
 examples/ex16-init.*
@@ -95,63 +85,12 @@ examples/gnuplot_ex20p.inp
 examples/ex21*.mesh
 examples/ex21*.sol
 examples/ex21p_*.*
-examples/ex23-*.gf
-examples/ex23*.mesh
-examples/Example23*
-examples/ex25.mesh
-examples/ex25-*.gf
-examples/ex25p-*.*
-
-examples/amgx/ex1
-examples/amgx/ex1p
-examples/amgx/.logamgx
-examples/amgx/refined.mesh
-examples/amgx/sol.gf
-examples/amgx/mesh.*
-examples/amgx/sol.*
-
-examples/gingko/ex1
-examples/gingko/refined.mesh
-examples/gingko/sol.gf
-examples/gingko/mesh.*
-examples/gingko/sol.*
-
-examples/hiop/ex9
-examples/hiop/ex9p
-examples/hiop/ex9.mesh
-examples/hiop/ex9-mesh.*
-examples/hiop/ex9-init.*
-examples/hiop/ex9-final.*
-
-examples/petsc/ex[1-69]p
-examples/petsc/ex1[0-1]p
-examples/petsc/mesh.*
-examples/petsc/sol.*
-examples/petsc/sol_p.*
-examples/petsc/sol_u.*
-examples/petsc/Example5*
-examples/petsc/ex9.mesh
-examples/petsc/ex9-mesh.*
-examples/petsc/ex9-init.*
-examples/petsc/ex9-final.*
-examples/petsc/Example9*
-examples/petsc/deformed.*
-examples/petsc/velocity.*
-examples/petsc/elastic_energy.*
-examples/petsc/mode_*
-
-examples/pumi/ex1
-examples/pumi/ex[126]p
-examples/pumi/refined.mesh
-examples/pumi/sol.gf
-examples/pumi/mesh.*
-examples/pumi/sol.*
-examples/pumi/displaced.mesh

 examples/sundials/ex9
 examples/sundials/ex1[06]
 examples/sundials/ex9p
 examples/sundials/ex1[06]p
+
 examples/sundials/ex9.mesh
 examples/sundials/ex9-mesh.*
 examples/sundials/ex9-init.*
@@ -166,73 +105,63 @@ examples/sundials/ex16-init.*
 examples/sundials/ex16-final.*
 examples/sundials/Example16*

-examples/superlu/ex1p
-examples/superlu/mesh.*
-examples/superlu/sol.*
+examples/petsc/ex[1-69]p
+examples/petsc/ex10p

-miniapps/adjoint/cvsRoberts_ASAi_dns
-miniapps/adjoint/adjoint_advection_diffusion
+examples/petsc/mesh.*
+examples/petsc/sol.*
+examples/petsc/sol_p.*
+examples/petsc/sol_u.*
+examples/petsc/Example5*
+examples/petsc/ex9-mesh.*
+examples/petsc/ex9-init.*
+examples/petsc/ex9-final.*
+examples/petsc/Example9*
+examples/petsc/deformed.*
+examples/petsc/velocity.*
+examples/petsc/elastic_energy.*
+
+examples/pumi/ex1
+examples/pumi/ex[126]p
+
+examples/pumi/refined.mesh
+examples/pumi/sol.gf
+examples/pumi/mesh.*
+examples/pumi/sol.*
+examples/pumi/displaced.mesh

 miniapps/electromagnetics/volta
 miniapps/electromagnetics/tesla
 miniapps/electromagnetics/maxwell
 miniapps/electromagnetics/joule
+
 miniapps/electromagnetics/Volta-AMR*
 miniapps/electromagnetics/Tesla-AMR*
 miniapps/electromagnetics/Maxwell-Parallel*
 miniapps/electromagnetics/Joule_*

-miniapps/gslib/field-diff
-miniapps/gslib/field-interp
-miniapps/gslib/findpts
-miniapps/gslib/pfindpts
-
 miniapps/meshing/mobius-strip
 miniapps/meshing/klein-bottle
 miniapps/meshing/toroid
-miniapps/meshing/twist
 miniapps/meshing/mesh-explorer
 miniapps/meshing/shaper
 miniapps/meshing/extruder
-miniapps/meshing/trimmer
 miniapps/meshing/mesh-optimizer
 miniapps/meshing/pmesh-optimizer
-miniapps/meshing/minimal-surface
-miniapps/meshing/pminimal-surface
-miniapps/meshing/polar-nc
+
 miniapps/meshing/mobius-strip.mesh
 miniapps/meshing/klein-bottle.mesh
 miniapps/meshing/toroid-*.mesh
-miniapps/meshing/twist-*.mesh
 miniapps/meshing/mesh-explorer.mesh
 miniapps/meshing/partitioning.txt
 miniapps/meshing/shaper.mesh
 miniapps/meshing/extruder.mesh
-miniapps/meshing/trimmer.mesh
 miniapps/meshing/optimized*
 miniapps/meshing/perturbed*
-miniapps/meshing/polar-nc.mesh
-
-miniapps/navier/navier_mms
-miniapps/navier/navier_kovasznay
-miniapps/navier/navier_kovasznay_vs
-miniapps/navier/navier_tgv
-miniapps/navier/navier_shear
-miniapps/navier/navier_3dfoc
-miniapps/navier/tgv_out*.txt
-miniapps/navier/*_output
-
-miniapps/nurbs/nurbs_ex1
-miniapps/nurbs/nurbs_ex1p
-miniapps/nurbs/nurbs_ex11p
-miniapps/nurbs/refined.mesh
-miniapps/nurbs/mesh.*
-miniapps/nurbs/sol.*
-miniapps/nurbs/mode_*
-miniapps/nurbs/Example1*

 miniapps/performance/ex1
 miniapps/performance/ex1p
+
 miniapps/performance/refined.mesh
 miniapps/performance/mesh.*
 miniapps/performance/sol.*
@@ -241,46 +170,19 @@ miniapps/tools/display-basis
 miniapps/tools/load-dc
 miniapps/tools/convert-dc
 miniapps/tools/lor-transfer
-miniapps/tools/get-values

-miniapps/toys/automata
-miniapps/toys/life
-miniapps/toys/mandel
-miniapps/toys/rubik
-miniapps/toys/snake
-miniapps/toys/lissajous
-miniapps/toys/mondrian
-miniapps/toys/snake-init.mesh
-miniapps/toys/snake-user.mesh
-miniapps/toys/snake-joined.mesh
-miniapps/toys/snake-c*.mesh
-miniapps/toys/automata.gf
-miniapps/toys/automata.mesh
-miniapps/toys/rubik-init.mesh
-miniapps/toys/mandel.mesh
-miniapps/toys/life.gf
-miniapps/toys/life.mesh
-miniapps/toys/lissajous.mesh
-miniapps/toys/lissajous.gf
-miniapps/toys/mondrian.mesh
+miniapps/nurbs/ex1
+miniapps/nurbs/ex1p
+miniapps/nurbs/ex11p
+miniapps/nurbs/refined.mesh
+miniapps/nurbs/mesh.*
+miniapps/nurbs/sol.*
+miniapps/nurbs/mode_*
+miniapps/nurbs/Example1*

 # Unit test binary and outputs
 tests/unit/output_meshes
 tests/unit/unit_tests
-tests/unit/punit_tests
-tests/unit/sedov_tests_*
-tests/unit/psedov_tests_*
-tests/unit/ceed_tests
-
-# Test script output
-tests/scripts/*.err
-tests/scripts/*.out
-tests/scripts/*.msg
-
-# Other tests
-tests/convergence/rates
-tests/convergence/prates
-tests/par-mesh-format/ex1p

 # VPATH builds
 build-*/*
@@ -1,308 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# General GitLab pipelines configurations for supercomputers and Linux clusters
-# at Lawrence Livermore National Laboratory (LLNL). This entire pipeline is
-# LLNL-specific!
-
-# We define the following GitLab pipeline variables:
-#
-# BUILD_ROOT:
-# The path to the shared resources between all jobs. For example, external
-# repositories like 'tests' and 'tpls' are cloned here. Also, 'tpls' is built
-# once for all targets, so that build happen here. The BUILD_ROOT is unique to
-# the pipeline, preventing any form of concurrency with other pipelines. This
-# also means that the BUILD_ROOT directory will never be cleaned.
-# TODO: add a clean-up mechanism
-#
-# BUILD_PATH:
-# In BUILD_ROOT, we want to separate builds depending on the machine used,
-# typically because we build on a set of dependencies per machine.
-#
-# REBASELINE:
-# Defines the default choice for updating the saved baseline results. By default
-# the baseline can only be updated from the master branch. This variable offers
-# the option to manually ask for rebaselining from another branch if necessary.
-#
-# MFEM_ALLOC_NAME:
-# On LLNL's quartz, there is only one allocation shared among jobs in order to
-# save time and resources. This allocation has to be uniquely named so that we
-# are sure to retrieve it.
-#
-# TPLS_REPO & TESTS_REPO:
-# Git repositories used in the pipeline
-#
-# ARTIFACTS_DIR:
-# Directory used to place artifacts.
-
-variables:
-  BUILD_ROOT: ${CI_BUILDS_DIR}/${CI_PROJECT_NAME}_${CI_COMMIT_REF_SLUG}_${CI_PIPELINE_ID}
-  BUILD_PATH: ${CI_BUILDS_DIR}/${CI_PROJECT_NAME}_${CI_COMMIT_REF_SLUG}_${CI_PIPELINE_ID}/${PLAT}/${TOOLCHAIN}
-  REBASELINE: "NO"
-  MFEM_ALLOC_NAME: ${CI_PROJECT_NAME}_ci_${CI_PIPELINE_ID}
-  TPLS_REPO: ssh://git@mybitbucket.llnl.gov:7999/mfem/tpls.git
-  TESTS_REPO: ssh://git@mybitbucket.llnl.gov:7999/mfem/tests.git
-  ARTIFACTS_DIR: artifacts
-
-# The pipeline is divided into stages. Usually, these are also synchronization
-# points, however, we use "needs" keyword to express the DAG of jobs for more
-# efficiency.
-# - We use setup phase to download content outside of mfem directory.
-# - Allocate is where quartz resources are allocated once for all.
-# - Libs is where dependencies are built.
-# - Build is where we build MFEM for multiple toolchains.
-# - Test is where we perform a first set of tests on MFEM build.
-# - Baseline_checks gathers baseline-type test suites execution
-# - Baseline_publish, only available on master, allows to update baseline
-#   results
-# - Deallocate releases quartz resources
-stages:
-  - setup
-  - allocate
-  - libs
-  - build
-  - test
-  - deallocate
-  - lassen_build
-  - lassen_test
-  - baseline_check
-  - baseline_publish
-
-# The setup job in setup stage don't rely on MFEM git repo. It prepares a
-# pipeline-wide working directory downloading/updating external repos.
-# TODO: updating tests and tpls is not necessary anymore since pipelines are
-# now using unique directories so repo are never shared with another pipeline.
-# This is not memory efficient (we keep a lot of data), hence this reminder.
-# Setup
-setup:
-  tags:
-    - shell
-    - quartz
-  stage: setup
-  variables:
-    GIT_STRATEGY: none
-  script:
-    - mkdir -p ${BUILD_ROOT} && cd ${BUILD_ROOT}
-    - if [ ! -d "tpls" ]; then git clone ${TPLS_REPO}; fi
-    - if [ ! -d "tests" ]; then git clone ${TESTS_REPO}; fi
-    - cd tpls && git pull && cd ..
-    - cd tests && git pull && cd ..
-
-# Share configurations (templates) for toolchain configuration.
-# Note: Any job using this template shouldn't redefine "before_script" key.
-.with_gcc_6_1_0:
-  variables:
-    TOOLCHAIN: gcc_6_1_0
-    CXX: g++
-    CC: gcc
-  before_script:
-    - module load gcc/6.1.0
-
-# On lassen
-.with_gcc_8_3_1:
-  variables:
-    TOOLCHAIN: gcc_8_3_1
-    CXX: g++
-    CC: gcc
-  before_script:
-    - module load gcc/8.3.1
-
-.with_gcc_4_9_3:
-  variables:
-    TOOLCHAIN: gcc_4_9_3
-    CXX: g++
-    CC: gcc
-  before_script:
-    - module load gcc/4.9.3
-
-.if_srun_alloc_for_make: &if_srun_alloc_for_make |
-  if [[ "${MPIEXEC}" == "srun" ]]
-  then
-    export JOB_ID=$(squeue -h --name=${MFEM_ALLOC_NAME} --format=%A)
-    [[ -n "JOB_ID" ]] && export JOB_ID="--jobid=${JOB_ID}"
-    RESOURCES="--extra-node-info=1:${MAKE_PAR}:1 --cpus-per-task=${MAKE_PAR} --ntasks=1"
-    # Allocation prefix:
-    export EXEC_PREFIX="srun ${JOB_ID} ${RESOURCES}"
-  fi
-
-# Build of dependencies and mfem:
-# if on quartz, uses a part of preallocated resources
-# Note: Those jobs don't rely on MFEM repository, hence the use of
-# "GIT_STRATEGY: none" preventing its clone.
-.build_hypre:
-  variables:
-    EXEC_PREFIX: ""
-    GIT_STRATEGY: none
-  stage: libs
-  script:
-    - cd ${BUILD_ROOT}/tpls
-    - mkdir -p ${BUILD_PATH}
-    - make clean
-    - *if_srun_alloc_for_make
-    - ${EXEC_PREFIX} make -j ${MAKE_PAR} hypre PREFIX=${BUILD_PATH}/hypre/src/ BUILD_DIR=${BUILD_PATH} LOG_DIR=${BUILD_PATH}
-
-.build_metis:
-  variables:
-    EXEC_PREFIX: ""
-    GIT_STRATEGY: none
-  stage: libs
-  script:
-    - cd ${BUILD_ROOT}/tpls
-    - mkdir -p ${BUILD_PATH}
-    - *if_srun_alloc_for_make
-    - ${EXEC_PREFIX} make -j ${MAKE_PAR} ${METIS} PREFIX=${BUILD_PATH}/ BUILD_DIR=${BUILD_PATH} LOG_DIR=${BUILD_PATH} CC=${CC} CXX=${CXX}
-
-# Building MFEM
-.build_mfem:
-  variables:
-    EXEC_PREFIX: ""
-  stage: build
-  script:
-    - mkdir -p ${BUILD_PATH}
-    - cp -r ${CI_PROJECT_DIR} ${BUILD_PATH}/${CI_PROJECT_NAME}_${MFEM_USE_MPI}_${MFEM_DEBUG}
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_${MFEM_USE_MPI}_${MFEM_DEBUG}
-    - *if_srun_alloc_for_make
-    - make config CXX=${CXX} MPICXX=mpicxx MFEM_USE_MPI=${MFEM_USE_MPI} MFEM_DEBUG=${MFEM_DEBUG} MFEM_MPIEXEC="${EXEC_PREFIX}" MFEM_MPIEXEC_NP=${MPIEXEC_NP}
-    - ${EXEC_PREFIX} make -j ${MAKE_PAR} all
-
-# TODO: Could this phase use a parallel run?
-.sanitycheck_mfem:
-  stage: test
-  variables:
-    GIT_STRATEGY: none
-  script:
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_${MFEM_USE_MPI}_${MFEM_DEBUG}
-    - make test
-
-# Shared script for baseline and sample-run-baseline, the value of BASELINE_TEST
-# differentiates between the two tests.
-.baseline_script: &baseline_script |
-  # locals
-  _glob_out=${BASELINE_TEST}.out
-  _glob_err=${BASELINE_TEST}.err
-  _base_diff=${BASELINE_TEST}-${SYS_TYPE}.diff
-  _base_patch=${BASELINE_TEST}-${SYS_TYPE}.patch
-  _base_out=${BASELINE_TEST}-${SYS_TYPE}.out
-
-  _out=${BASELINE_TEST}-${SYS_TYPE}.out
-  _ref=../${BASELINE_TEST}-${SYS_TYPE}.saved
-  _out_txt=${BASELINE_TEST}.txt
-  _diff=${BASELINE_TEST}-diff.txt
-  # prepare
-  cd ${BUILD_ROOT}
-  ln -snf ${CI_PROJECT_DIR} mfem
-  cd tests
-  mkdir _${BASELINE_TEST} && cd _${BASELINE_TEST}
-  # run
-  salloc --nodes=1 -p pdebug ../runtest ../../mfem "${BASELINE_TEST} ${ADDITIONAL_DIR}"
-  # post
-  mkdir ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}
-  if [[ -s ${_glob_err} ]]
-  then
-    echo "ERROR during ${BASELINE_TEST} execution";
-    echo "Here is the ${_glob_err} file content";
-    cat ${_glob_err}
-    cp ${_glob_err} ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/${_glob_err}.txt
-    exit 1;
-  elif [[ ! -f ${_base_patch} && ! -f ${_base_out} ]]
-  then
-    echo "Something went WRONG in ${BASELINE_TEST}:";
-    echo "Either ${_base_patch} or ${_base_out} should exists";
-    exit 1;
-  elif [[ -f ${_base_patch} ]]
-  then
-    echo "${BASELINE_TEST}: Differences found, patch generated"
-    cp ${_base_patch} ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/${_base_patch}.txt
-  elif [[ -f ${_base_out} ]]
-  then
-    echo "${BASELINE_TEST}: Differences found, replacement file generated"
-    cp ${_base_out} ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/${_base_out}.txt
-  fi
-  # _base_diff won't even exist if there is no difference.
-  if [[ -f ${_base_diff} ]]
-  then
-    echo "${BASELINE_TEST}: Relevant differences (filtered diff) ..."
-    cat ${_base_diff}
-    cp ${_base_diff} ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/${_base_diff}.txt
-  fi
-  if [[ ! -s ${_base_diff} ]]
-  then
-    echo "${BASELINE_TEST}: PASSED"
-    true
-  else
-    echo "${BASELINE_TEST}: FAILED"
-    false
-  fi
-
-# Actual templates for baseline checks
-.baselinecheck_mfem:
-  stage: baseline_check
-  variables:
-    BASELINE_TEST: baseline
-    ADDITIONAL_DIR: ${BUILD_ROOT}/tpls
-  script:
-    - *baseline_script
-  artifacts:
-    when: always
-    paths:
-      - ${ARTIFACTS_DIR}
-  allow_failure: true
-
-.samplebaselinecheck_mfem:
-  stage: baseline_check
-  variables:
-    BASELINE_TEST: sample-runs-baseline
-    ADDITIONAL_DIR: ""
-  script:
-    - *baseline_script
-  timeout: 4h
-  artifacts:
-    when: always
-    paths:
-      - ${ARTIFACTS_DIR}
-  allow_failure: true
-
-# This job can only be manually triggers on a pipeline for master branch, or if
-# the pipeline was triggered with REBASELINE="YES"
-.rebaseline_mfem:
-  stage: baseline_publish
-  rules:
-    - if: '$CI_COMMIT_BRANCH == "master" || $REBASELINE == "YES"'
-      when: manual
-  script:
-    - export PATCH_FILE=${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/baseline-${SYS_TYPE}.patch
-    - export FULL_FILE=${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/baseline-${SYS_TYPE}.out
-    - export DIFF_FILE=${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/baseline-${SYS_TYPE}.diff
-    - cd ${BUILD_ROOT}/tests
-    - |
-      if [[ ! -f "${DIFF_FILE}.txt" ]]
-      then
-          echo "Nothing to be done: no relevant change in baseline"
-          exit 0
-      elif [[ -f "${PATCH_FILE}.txt" ]]
-      then
-          mv ${PATCH_FILE}.txt ${PATCH_FILE}
-          patch "./baseline-${SYS_TYPE}.saved" < "${PATCH_FILE}"
-      elif [[ -f "${FULL_FILE}.txt" ]]
-      then
-          cp "${FULL_FILE}.txt" "./baseline-${SYS_TYPE}.saved"
-      else
-          echo "File missing: expected ${PATCH_FILE}.txt or ${FULL_FILE}.txt"
-          exit 1
-      fi
-    - git add baseline-${SYS_TYPE}.saved
-    - git commit -m "${SYS_TYPE} rebaselined in GitLab pipeline ${CI_PIPELINE_ID}"
-    - git push origin master
-
-# The list on jobs is defined in machine-specific files.
-include:
-  - local: .gitlab/quartz.yml
-  - local: .gitlab/lassen.yml
@@ -1,57 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# GitLab pipelines configurations for the Lassen machine at LLNL
-
-.on_lassen:
-  tags:
-    - shell
-    - lassen
-  variables:
-    PLAT: lassen
-
-# Build MFEM
-build_mfem_ser_lassen:
-  extends: [.with_gcc_8_3_1, .on_lassen]
-  needs: [setup]
-  stage: lassen_build
-  script:
-    - mkdir -p ${BUILD_PATH}
-    - cp -r ${CI_PROJECT_DIR} ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser
-    - lalloc 1 -W 5 -q pdebug make -j cuda CUDA_ARCH=sm_70
-
-build_mfem_debug_ser_lassen:
-  extends: [.with_gcc_8_3_1, .on_lassen]
-  needs: [setup]
-  stage: lassen_build
-  script:
-    - mkdir -p ${BUILD_PATH}
-    - cp -r ${CI_PROJECT_DIR} ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser_debug
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser_debug
-    - lalloc 1 -W 5 -q pdebug make -j cuda MFEM_DEBUG="YES" CPPFLAGS=-O2 CUDA_ARCH=sm_70
-
-# Sanity check
-sanitycheck_mfem_ser_lassen:
-  extends: [.with_gcc_8_3_1, .on_lassen]
-  stage: lassen_test
-  needs: [build_mfem_ser_lassen]
-  script:
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser
-    - lalloc 1 -W 15 -q pdebug make -j test
-
-sanitycheck_mfem_debug_ser_lassen:
-  extends: [.with_gcc_8_3_1, .on_lassen]
-  stage: lassen_test
-  needs: [build_mfem_debug_ser_lassen]
-  script:
-    - cd ${BUILD_PATH}/${CI_PROJECT_NAME}_lassen_ser_debug
-    - lalloc 1 -W 30 -q pdebug make -j test
@@ -1,145 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# GitLab pipelines configurations for the Quartz machine at LLNL
-
-.on_quartz:
-  tags:
-    - shell
-    - quartz
-  variables:
-    PLAT: quartz
-    MPIEXEC: srun
-    MPIEXEC_NP: "-n"
-    MAKE_PAR: 6
-    BASELINE_PAR: 18
-
-# Allocate
-allocate_quartz:
-  variables:
-    GIT_STRATEGY: none
-  extends: .on_quartz
-  stage: allocate
-  script:
-    - |
-      if [[ "${MPIEXEC}" == "srun" ]]
-      then
-      salloc --nodes=1 --extra-node-info=2:18:1 --partition=pdebug --time=30 --no-shell --job-name=${MFEM_ALLOC_NAME}
-      fi
-  timeout: 6h
-
-# Release
-deallocate_quartz:
-  variables:
-    GIT_STRATEGY: none
-  extends: .on_quartz
-  stage: deallocate
-  script:
-    - |
-      if [[ "${MPIEXEC}" == "srun" ]]
-      then
-      export JOB_ID=$(squeue -h --name=${MFEM_ALLOC_NAME} --format=%A)
-      ([[ -n "${JOB_ID}" ]] && scancel ${JOB_ID})
-      fi
-  when: always
-
-# Build external libraries (tpls)
-build_hypre_gcc_6_1_0_quartz:
-  extends: [.build_hypre, .with_gcc_6_1_0, .on_quartz]
-
-build_parmetis_gcc_6_1_0_quartz:
-  extends: [.build_metis, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    METIS: parmetis
-
-build_metis4_gcc_6_1_0_quartz:
-  extends: [.build_metis, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    METIS: metis4
-
-build_metis5_gcc_6_1_0_quartz:
-  extends: [.build_metis, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    METIS: metis5
-  allow_failure: true
-
-# Build MFEM
-build_mfem_debug_ser_gcc_4_9_3_quartz:
-  extends: [.build_mfem, .with_gcc_4_9_3, .on_quartz]
-  variables:
-    MFEM_DEBUG: "YES"
-    MFEM_USE_MPI: "NO"
-
-build_mfem_debug_ser_gcc_6_1_0_quartz:
-  extends: [.build_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "YES"
-    MFEM_USE_MPI: "NO"
-
-build_mfem_debug_par_gcc_6_1_0_quartz:
-  extends: [.build_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "YES"
-    MFEM_USE_MPI: "YES"
-  needs: [build_hypre_gcc_6_1_0_quartz, build_parmetis_gcc_6_1_0_quartz]
-
-build_mfem_opt_ser_gcc_6_1_0_quartz:
-  extends: [.build_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "NO"
-    MFEM_USE_MPI: "NO"
-
-build_mfem_opt_par_gcc_6_1_0_quartz:
-  extends: [.build_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "NO"
-    MFEM_USE_MPI: "YES"
-  needs: [build_hypre_gcc_6_1_0_quartz, build_parmetis_gcc_6_1_0_quartz]
-
-### Tests
-
-# Sanity check
-sanitycheck_mfem_debug_ser_gcc_4_9_3_quartz:
-  extends: [.sanitycheck_mfem, .with_gcc_4_9_3, .on_quartz]
-  variables:
-    MFEM_DEBUG: "YES"
-    MFEM_USE_MPI: "NO"
-  needs: [build_mfem_debug_ser_gcc_4_9_3_quartz, allocate_quartz]
-
-sanitycheck_mfem_debug_ser_gcc_6_1_0_quartz:
-  extends: [.sanitycheck_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "YES"
-    MFEM_USE_MPI: "NO"
-  needs: [build_mfem_debug_ser_gcc_6_1_0_quartz, allocate_quartz]
-
-sanitycheck_opt_ser_mfem_gcc_6_1_0_quartz:
-  extends: [.sanitycheck_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "NO"
-    MFEM_USE_MPI: "NO"
-  needs: [build_mfem_opt_ser_gcc_6_1_0_quartz, allocate_quartz]
-
-sanitycheck_opt_par_mfem_gcc_6_1_0_quartz:
-  extends: [.sanitycheck_mfem, .with_gcc_6_1_0, .on_quartz]
-  variables:
-    MFEM_DEBUG: "NO"
-    MFEM_USE_MPI: "YES"
-  needs: [build_mfem_opt_par_gcc_6_1_0_quartz, allocate_quartz]
-
-# Baseline
-baselinecheck_mfem_intel_quartz:
-  extends: [.baselinecheck_mfem, .on_quartz]
-  needs: [allocate_quartz]
-
-baselinepublish_mfem_quartz:
-  extends: [.rebaseline_mfem, .on_quartz]
-  needs: [baselinecheck_mfem_intel_quartz]
@@ -1,146 +1,28 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+sudo: false

 language: cpp

-os: linux
-dist: bionic
-
-stages:
-  - checks
-  - tests
-  - optional
-
-env:
-  global:
-    - HYPRE_ARCHIVE=v2.19.0.tar.gz
-      HYPRE_URL=https://github.com/hypre-space/hypre/archive/$HYPRE_ARCHIVE
-      HYPRE_TOP_DIR=hypre-2.19.0
-
-jobs:
+matrix:
  include:
-
-    # ========================
-    #         Checks
-    # ========================
-    # - code-style
-    # - documentation
-    # - gitignore
-
-    - stage: checks
-      os: linux
-      dist: xenial
-      name: "code-style"
-      addons:
-        apt:
-          packages:
-            - astyle=2.05.1-0ubuntu1
-      script:
-        - cd ${TRAVIS_BUILD_DIR}
-        - cd tests/scripts
-        - ./runtest code-style
-
-    - stage: checks
-      os: linux
-      name: "documentation"
-      addons:
-        apt:
-          packages:
-            - doxygen
-            - graphviz
-      script:
-        - cd ${TRAVIS_BUILD_DIR}
-        - cd tests/scripts
-        - ./runtest documentation
-
-    - stage: checks
-      os: linux
-      name: "gitignore"
-      addons:
-        apt:
-          packages:
-            - mpich
-            - libmpich-dev
-      env: MPI=YES
-      before_script:
-        - cd ${TRAVIS_BUILD_DIR}
-        - mpicxx -v
-        - make config MFEM_USE_MPI=YES MFEM_MPI_NP=2
-        - make all -j3
-        - make test-noclean
-      script:
-        - cd tests/scripts
-        - ./runtest gitignore
-      cache:
-        ccache: true
-        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
-          - $TRAVIS_BUILD_DIR/../metis-4.0
-      before_cache:
-        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
-
-    # ========================
-    #  Optional Checks/Tests
-    # ========================
-    # - branch-history
-
-    - stage: optional
-      name: "branch-history"
-      if: branch != next
-      # need full git history for the binary/big files check
-      git:
-        depth: false
-      script:
-        - cd ${TRAVIS_BUILD_DIR}
-        # update master
-        - git fetch origin master:master
-        # checkout a branch (otherwise Travis works in detached head)
-        - git checkout -b travis_tests
-        - cd tests/scripts
-        - ./runtest branch-history
-
-    # ========================
-    #       Linux tests
-    # ========================
-    # - serial + debug
-    # - serial
-    # - parallel + debug
-    # - parallel
-
-    - stage: tests
-      os: linux
+    #
+    # Linux
+    #
+    - os: linux
      compiler: gcc
-      name: "Linux: Serial + Debug"
      env: DEBUG=YES
           MPI=NO
           CODECOV=NO
           MFEM_TEST_TARGET=check
-      cache:
-        ccache: true
-
+    #
    - os: linux
      compiler: gcc
-      name: "Linux: Serial"
      env: DEBUG=NO
           MPI=NO
           CODECOV=NO
           MFEM_TEST_TARGET=test
-      cache:
-        ccache: true
-
+    #
    - os: linux
      compiler: gcc
-      name: "Linux: Parallel + Debug"
      addons:
        apt:
          # sources:
@@ -160,18 +42,16 @@ jobs:
           MFEM_TEST_TARGET=check
           NPROCS=2
      cache:
-        ccache: true
        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/lib
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/include
          - $TRAVIS_BUILD_DIR/../metis-4.0
      before_cache:
        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
-
+          mv libmetis.a ..; rm -rf *; mv ../libmetis.a .
+    #
    - os: linux
      compiler: gcc
-      name: "Linux: Parallel"
      addons:
        apt:
          # sources:
@@ -191,93 +71,35 @@ jobs:
           MFEM_TEST_TARGET=test
           NPROCS=2
      cache:
-        ccache: true
        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/lib
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/include
          - $TRAVIS_BUILD_DIR/../metis-4.0
      before_cache:
        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
-
-    - os: linux
-      compiler: gcc
-      name: "Linux: Parallel (cmake)"
-      addons:
-        apt:
-          packages:
-            - mpich
-            - libmpich-dev
-      env: MPI=YES
-           NPROCS=2
-      script:
-        - cd ${TRAVIS_BUILD_DIR}
-        - mkdir ${TRAVIS_BUILD_DIR}/build
-        - cd ${TRAVIS_BUILD_DIR}/build
-        - cmake ..
-             -DMFEM_USE_MPI=ON
-             -DHYPRE_DIR=${TRAVIS_BUILD_DIR}/../$HYPRE_TOP_DIR/src/hypre
-             -DMFEM_MPI_NP=$NPROCS
-        - make -j3 mfem examples
-        - cd ${TRAVIS_BUILD_DIR}/build/tests/unit
-        - make -j3
-        - ctest --output-on-failure
-      cache:
-        ccache: true
-        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
-          - $TRAVIS_BUILD_DIR/../metis-4.0
-      before_cache:
-        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
-
-    # ========================
-    #      Mac OS X tests
-    # ========================
-    # - serial + debug
-    # - serial
-    # - parallel + debug
-    # - parallel
-
+          mv libmetis.a ..; rm -rf *; mv ../libmetis.a .
+    #
+    # Mac OS X
+    #
    - os: osx
-      osx_image: xcode11.2
+      # osx_image: xcode7.3
      compiler: clang
-      name: "Mac: Serial + Debug"
-      addons:
-        homebrew:
-          packages:
-            - ccache
      env: DEBUG=YES
           MPI=NO
           CODECOV=NO
           MFEM_TEST_TARGET=check
-      cache:
-        ccache: true
-
+    #
    - os: osx
-      osx_image: xcode11.2
+      # osx_image: xcode7.3
      compiler: clang
-      name: "Mac: Serial"
-      addons:
-        homebrew:
-          packages:
-            - ccache
      env: DEBUG=NO
           MPI=NO
           CODECOV=NO
           MFEM_TEST_TARGET=test
-      cache:
-        ccache: true
-
+    #
    - os: osx
-      osx_image: xcode11.2
+      # osx_image: xcode7.3
      compiler: clang
-      name: "Mac: Parallel + Debug"
-      addons:
-        homebrew:
-          packages:
-            - ccache
      env: DEBUG=YES
           MPI=YES
           CODECOV=NO
@@ -285,24 +107,18 @@ jobs:
           NPROCS=4
           TMPDIR=/tmp
      cache:
-        ccache: true
        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/lib
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/include
          - $TRAVIS_BUILD_DIR/../metis-4.0
          - $HOME/local-cached
      before_cache:
        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
-
+          mv libmetis.a ..; rm -rf *; mv ../libmetis.a .
+    #
    - os: osx
-      osx_image: xcode11.2
+      # osx_image: xcode7.3
      compiler: clang
-      name: "Mac: Parallel"
-      addons:
-        homebrew:
-          packages:
-            - ccache
      env: DEBUG=NO
           MPI=YES
           CODECOV=YES
@@ -310,15 +126,15 @@ jobs:
           NPROCS=4
           TMPDIR=/tmp
      cache:
-        ccache: true
        directories:
-          - $TRAVIS_BUILD_DIR/../$HYPRE_TOP_DIR/src/hypre
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/lib
+          - $TRAVIS_BUILD_DIR/../hypre-2.10.0b/src/hypre/include
          - $TRAVIS_BUILD_DIR/../metis-4.0
          - $HOME/local-cached
      before_cache:
        - cd $TRAVIS_BUILD_DIR/../metis-4.0;
-          mv libmetis.a Lib ..; rm -rf * ; mv ../libmetis.a ../Lib .;
-          rm -f Lib/*.{c,o}
+          mv libmetis.a ..; rm -rf *; mv ../libmetis.a .
+

 before_install:
   # No addon for brew yet, have to install OSX packages this way.
@@ -326,19 +142,14 @@ before_install:
   #      brew install open-mpi;
   #   fi

-   # Disable ccache while building dependencies that are cached:
-   - echo "before \$PATH = $PATH";
-     export PATH=${PATH//\/usr\/lib\/ccache:/};
-     echo "after  \$PATH = $PATH"
-
-   # On Mac OS X, build and cache OpenMPI 2.1.6:
+   # On Mac OS X, build and cache OpenMPI 2.1.1:
   - if [ $TRAVIS_OS_NAME == "osx" ] && [ $MPI == "YES" ]; then
        if [ ! -e $HOME/local-cached/bin/mpicc ]; then
           mkdir -p $HOME/builds && cd $HOME/builds &&
-           wget https://download.open-mpi.org/release/open-mpi/v2.1/openmpi-2.1.6.tar.bz2 &&
-           tar jxf openmpi-2.1.6.tar.bz2 &&
+           wget https://www.open-mpi.org/software/ompi/v2.1/downloads/openmpi-2.1.1.tar.bz2 &&
+           tar jxf openmpi-2.1.1.tar.bz2 &&
           mkdir openmpi-build && cd openmpi-build &&
-           ../openmpi-2.1.6/configure --prefix=$HOME/local-cached &&
+           ../openmpi-2.1.1/configure --prefix=$HOME/local-cached &&
           make -j3 all && make install;
        fi;
        PATH=$HOME/local-cached/bin:$PATH;
@@ -383,28 +194,26 @@ install:

   # hypre
   - if [ $MPI == "YES" ]; then
-        if [ ! -e $HYPRE_TOP_DIR/src/hypre/lib/libHYPRE.a ]; then
-           wget $HYPRE_URL;
-           rm -rf $HYPRE_TOP_DIR;
-           tar xvzf $HYPRE_ARCHIVE;
-           cd $HYPRE_TOP_DIR/src;
-           ./configure --disable-fortran CC=mpicc CXX=mpic++;
+        if [ ! -e hypre-2.10.0b/src/hypre/lib/libHYPRE.a ]; then
+           wget https://computation.llnl.gov/project/linear_solvers/download/hypre-2.10.0b.tar.gz --no-check-certificate;
+           rm -rf hypre-2.10.0b;
+           tar xvzf hypre-2.10.0b.tar.gz;
+           cd hypre-2.10.0b/src;
+           ./configure --disable-fortran --without-fei CC=mpicc CXX=mpic++;
           make -j3;
           cd ../..;
        else
-            echo "Reusing cached $HYPRE_TOP_DIR/";
+            echo "Reusing cached hypre-2.10.0b/";
        fi;
-        ln -s $HYPRE_TOP_DIR hypre;
+        ln -s hypre-2.10.0b hypre;
     else
        echo "Serial build, not using hypre";
     fi

-   # METIS, use a mirror because the original source server is not always up.
-   # Original url:
-   #    http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/OLD/metis-4.0.3.tar.gz
+   # METIS
   - if [ $MPI == "YES" ]; then
        if [ ! -e metis-4.0/libmetis.a ]; then
-           wget https://mfem.github.io/tpls/metis-4.0.3.tar.gz;
+           wget http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/OLD/metis-4.0.3.tar.gz;
           tar xvzf metis-4.0.3.tar.gz;
           make -j3 -C metis-4.0.3/Lib CC="$CC" OPTFLAGS="-O2";
           rm -rf metis-4.0;
@@ -414,26 +223,12 @@ install:
        fi;
     fi

-   # Re-enable ccache on linux; enable ccache on mac os:
-   - if [ $TRAVIS_OS_NAME == "linux" ]; then
-        export PATH="/usr/lib/ccache:$PATH";
-     else
-        if [ $TRAVIS_OS_NAME == "osx" ]; then
-           export PATH="/usr/local/opt/ccache/libexec:$PATH";
-        fi;
-     fi
-
-   - printf "which \$CC  = "; which $CC;
-     printf "which \$CXX = "; which $CXX
-
 script:
   # Compiler
   - if [ $MPI == "YES" ]; then
        export MYCXX=mpic++;
-        export MAKE_CXX_FLAG=MPICXX=$MYCXX;
     else
        export MYCXX="$CXX";
-        export MAKE_CXX_FLAG=CXX=$MYCXX;
     fi

   # Print the compiler version
@@ -446,12 +241,12 @@ script:
     if [ "$CODECOV" == "YES" ]; then
        CPPFLAGS="--coverage -g";
     fi;
-     if [ "$TRAVIS_OS_NAME" != "linux" ] || [ "$DEBUG" == "YES" ]; then
-        CPPFLAGS+=" -pedantic -Wall -Werror";
+     if [ "$CXX" == "clang++" ]; then
+        export MFEM_PERF_SW=clang;
     fi

   # Configure the library
-   - make config MFEM_USE_MPI=$MPI MFEM_DEBUG=$DEBUG $MAKE_CXX_FLAG
+   - make config MFEM_USE_MPI=$MPI MFEM_DEBUG=$DEBUG MFEM_CXX="$MYCXX"
        MFEM_MPI_NP=$NPROCS CPPFLAGS="$CPPFLAGS"
   # Show the configuration
   - make info
@@ -5,545 +5,56 @@
                      | | | | | ||  _||  __/| | | | | |
                      |_| |_| |_||_|   \___||_| |_| |_|

-                               https://mfem.org
+                               http://mfem.org


-Version 4.2.1 (development)
+Version 4.0.1 (development)
 ===========================

- Added high-order matrix-free auxiliary Maxwell solver for H(curl) problems,
-  as described in Barker and Kolev 2020 (https://doi.org/10.1002/nla.2348).
-
- Added matrix-free GPU-enabled implementations of GradientInterpolator and
-  IdentityInterpolator.
-
- Added interface to MUMPS direct solver. Its usage is demonstrated in ex25p.
-  See http://mumps.enseeiht.fr/ for more details. Supported versions >= 5.1.1.
-
- Added three ESDIRK time integrators: implicit trapezoid rule, L-stable
-  ESDIRK-32, and A-stable ESDIRK-33.
-
- Added a "scaled Jacobian" visualization option in the Mesh Explorer miniapp to
-  help identify elements with poor mesh quality.
-
- Added support for the "BR2" discontinuous Galerkin discretization for
-  diffusion via DGDiffusionBR2Integrator (see Example 14/14p).
-
- Generalized the Multigrid class to support non-geometric multigrid. The
-  previous functionality, based on FiniteElementSpaceHierarchy, is now available
-  in the derived class GeometricMultigrid.
-
- Upgraded the Catch unit test framework from version 2.13.0 to version 2.13.2.
-
- Implemented a filter method for the Navier miniapp to stabilize highly
-  turbulent flows in direct numerical simulation.
-
- Added partial assembly and device support to Example 25/25p, with diagonal
-  preconditioning.
-
- Implemented a variable step-size IMEX (VSSIMEX) method for the Navier miniapp.
-
- Added new mesh quality metrics and improved the untangling capabilities of the
-  TMOP-based mesh optimization algorithms.
-
- Changed the interface for the error estimator.
-
- Implemented the parallel Kelly error indicator for scalar-valued problems.
-
- Added new classes DenseSymmetricMatrix and SymmetricMatrixCoefficient for
-  efficient evaluation of symmetric matrix coefficients. This replaces the now
-  deprecated EvalSymmetric in MatrixCoefficient. Added DiagonalMatrixCoefficient
-  for clarity, which is a typedef of VectorCoefficient.
-
- Implemented an adaptive linear solver tolerance option for NewtonSolver based
-  on the algorithm of Eisenstat and Walker.
-
- Extending support for L2 basis functions using MapTypes VALUE and INTEGRAL in
-  linear interpolators and GridFunction "GetValue" methods.
-
-
-Version 4.2, released on October 30, 2020
-=========================================
-
-High-Performance Computing
--------------------------
- Added support for explicit vectorization in the high-performance templated
-  code, which can now take advantage of specific classes on the following
-  architectures:
-  * x86 (SSE/AVX/AVX2/AVX512),
-  * Power8 & Power9 (VSX),
-  * BG/Q (QPX).
-  These are disabled by default, but can be enabled with MFEM_USE_SIMD=YES.
-  See the new file linalg/simd.hpp and the new directory linalg/simd.
-
- Added an Element Assembly mode compatible with GPU device execution for H1 and
-  L2 spaces in the mass, convection, diffusion, transpose, and the face DG trace
-  integrators. See option '-ea' in Example 9. When enabled, this assembly level
-  stores independent dense matrices for the elements, and independent dense
-  matrices for the faces in the DG case.
-
- Added a Full Assembly mode compatible with GPU device execution. This assembly
-  level builds on top of the Element Assembly kernels to compute a global sparse
-  matrix. All integrators supported by element assembly are also supported by
-  full assembly. See the '-fa' option in Example 9.
-
- Optimized the AMD/HIP kernel support and enabled HIP support in the libCEED
-  integration. This is now available via the "ceed-hip" device backend.
-
- Improved the libCEED integration to support:
-  * AssemblyLevel::NONE for Mass, Diffusion, VectorMass, and VectorDiffusion
-    Integrators. This level computes the full operator evaluation "on the fly".
-  * VectorMassIntegrator and VectorDiffusionIntegrator.
-  * All types of (scalar) Coefficients.
-
- Added partial assembly / device support for:
-  * H(div) bilinear forms and VectorFEDivergenceIntegrator.
-  * BlockOperator, see the updated Example 5.
-  * Complex operators, see the updated Example 22.
-  * Chebyshev accelerated polynomial smoother.
-  * Convergent diagonal preconditioning on non-conforming adaptively refined
-    meshes, see Example 6/6p.
-
- Added CUDA support for:
-  * Sparse matrix-vector multiplication with cuSPARSE,
-  * SUNDIALS ODE integrators, see updated SUNDIALS modification of Example 9/9p.
-
-Linear and nonlinear solvers
----------------------------
- Added a new solver class for simple integration with NVIDIA's multigrid
-  library, AmgX. The AmgX class is designed to work as a standalone solver or
-  preconditioner for existing MFEM solvers. It uses MFEM's sparse matrix format
-  for serial runs and the HypreParMatrix format for parallel runs. The new
-  solver may be configured to run with one GPU per MPI rank or with more MPI
-  ranks than GPUs. In the latter case, matrices and vectors are consolidated to
-  ranks communicating with the GPUs and the solution is then broadcasted.
-
-  Although CUDA is required to build, the AmgX support is compatible with the
-  MFEM CPU device configuration. The examples/amgx folder illustrates how to
-  integrate AmgX in existing MFEM applications. The AmgX solver class is
-  partially based on: "AmgXWrapper: An interface between PETSc and the NVIDIA
-  AmgX library", by Pi-Yueh Chuang and Lorena A. Barba, doi:10.21105/joss.00280.
-
- Added initial support for geometric h- and p-multigrid preconditioners for
-  matrix-based and matrix-free discretizations with basic GPU capability, see
-  Example 26/26p.
-
- Added support for the CVODES package in SUNDIALS which provides ODE solvers
-  with sensitivity analysis capabilities. See the CVODESSolver class and the new
-  adjoint miniapps in the miniapps/adjoint directory.
-
- Added an interface to the MKL CPardiso solver, an MPI-parallel sparse direct
-  solver developed by Intel. See Example 11p for an illustration of its usage.
-
- Added support for the SLEPc eigensolver package, https://slepc.upv.es.
-
- Upgraded SuperLU interface to use SuperLU_DIST 6.3.1. Added a simple SuperLU
-  example in the new directory examples/superlu.
-
- Extended the KINSOL (SUNDIALS) nonlinear solver interface to support the
-  Jacobian-free Newton-Krylov method. A usage example is shown in Example 10p.
-
- Block arrays of parallel matrices can now be merged into a single parallel
-  matrix with the function HypreParMatrixFromBlocks. This could be useful for
-  solving block systems with parallel direct solvers such as STRUMPACK.
-
- Added wrappers for hypre's flexible GMRES solver and the new parallel ILU
-  preconditioner. The latter requires hypre version 2.19.0 or later.
-
-Discretization improvements
---------------------------
- Extended GSLIB-FindPoints integration to support simplices and interpolation
-  of functions from L2, H(div) and H(curl) spaces.
-
- Added support for computing asymptotic error estimates and convergence rates
-  for the whole de Rham sequence based on the new class ConvergenceStudy and new
-  member methods in GridFunction and ParGridFunction. See the rates.cpp file in
-  the tests/convergence directory for sample usage.
-
- Extended the GetValue and GetVectorValue methods of GridFunction to support
-  evaluation on boundary elements and, in the continuous field case, arbitrary
-  mesh edges and faces. This requires passing an ElementTransformation argument.
-
- Added support for matrix-free interpolation and restriction operators between
-  continuous H1 finite element spaces of different order on the same mesh or
-  with the same order on uniformly refined meshes.
-
- The Coefficient classes based on a C-function pointer (FunctionCoefficient,
-  VectorFunctionCoefficient and MatrixFunctionCoefficient) now use the more
-  general std::function class template. This allows the classes to be backward
-  compatible (i.e. they can still work with C-functions) and, in addition,
-  support any "callable", e.g. lambda functions.
-
- Non-conforming meshes are now supported with block nonlinear forms. See the
-  updated Example 19/19p.
-
-Meshing improvements
+Improved GPU support
 --------------------
- The graph linear ordering library Gecko, previously an external dependency, is
-  now included directly in MFEM. As a result, Mesh::GetGeckoElementOrdering is
-  always available. The interface has also been improved, see for example the
-  Mesh Explorer miniapp.
-
- Added support for finite difference-based gradient and Hessian approximation
-  in the TMOP mesh optimization algorithms. This improves the accuracy of the
-  Hessian for r-adaptivity using discrete fields, and allows use of skewness
-  and orientation based metrics.
-
- Improved Gmsh reader (version 2.2), which now supports both high-order and
-  periodic meshes. Segments, triangles, quadrilaterals, and tetrahedra are
-  supported up to order 10. Wedges and hexahedra are supported up to order 9.
-  For sample periodic meshes, see the periodic*.msh files in the data directory.
-
- Added support for construction of (serial) non-conforming meshes. Hanging
-  nodes can be marked with Mesh::AddVertexParents when building the mesh with
-  the "init" constructor. The usage is demonstrated in a new meshing miniapp,
-  Polar NC, which generates meshes that are non-conforming from the start.
-
- Added support for r-adaptivity with more than one discrete field. This allows
-  the user to specify different discrete functions for controlling the size,
-  aspect-ratio, orientation, and skew of elements in the mesh.
-
- Additional TMOP improvements:
-  * Capability for approximate tangential mesh relaxation.
-  * Support and examples for using TMOP on mixed meshes.
-  * Complete integrator action accounting for spatial derivatives of discrete
-    and analytic targets.
-
-New and updated examples and miniapps
-------------------------------------
- Added a new miniapp, Navier, that solves the time-dependent Navier-Stokes
-  equations of incompressible fluid dynamics. See the miniapps/navier directory
-  for more details.
-
- Added 10 new example codes:
-  * Example 25/25p demonstrates the use of a Perfectly Matched Layer (PML) for
-    electromagnetic wave propagation (indefinite Maxwell).
-  * Example 26/26p shows how to construct matrix-free geometric and p-multigrid
-    preconditioner for the Laplace problem.
-  * Example 27/27p demonstrates the enforcement of Dirichlet, Neumann, Robin,
-    and periodic boundary conditions with either H1 or DG Laplace problems.
-  * Versions of Example 1/1p in examples/amgx demonstrating the use of AmgX,
-    to solve the Laplace problem with AMG preconditioning on GPUs.
-  * A version of Example 11p in examples/petsc demonstrating the use of SLEPc,
-    to solve the Laplace eigenproblem with shift-and-invert transformation.
-  * A version of Example 1 in examples/superlu demonstrating the use of SuperLU
-    to solve the Laplace problem.
-
- Added a new Field Interpolation miniapp in miniapps/gslib that demonstrates
-  transfer of grid functions between different meshes using GSLIB-FindPoints.
-
- Added 2 miniapps in the new miniapps/adjoint directory demonstrating how to
-  solve adjoint problems in MFEM using the CVODES package in SUNDIALS. Both of
-  these miniapps require the MFEM_USE_SUNDIALS configuration option.
-  * The cvsRoberts_ASAi_dns miniapp solves a backward adjoint problem for a
-    system of ODEs, evaluating both forward and adjoint quadratures in serial.
-  * The adjoint_advection_diffusion miniapp solves a backward adjoint problem
-    for an advection diffusion PDE, evaluating adjoint quadratures in parallel.
-
- Added 4 additional meshing miniapps:
-  * The Minimal Surface miniapp solves Plateau's problem: the Dirichlet problem
-    for the minimal surface equation.
-  * The Twist miniapp demonstrates how to stitch together opposite surfaces of a
-    mesh to create a topologically periodic mesh.
-  * The Trimmer miniapp trims away parts of a mesh based on element attributes.
-  * Polar NC shows the construction of polar non-conforming meshes.
-
- Several examples and miniapps were updated to include:
-  * Full and element assembly support in Example 9/9p.
-  * Partial assembly with diagonal preconditioning in Examples 4/4p/5/5p/22/22p.
-  * Diagonal preconditioner in Example 6/6p for partial assembly with AMR.
-  * The option to plot a function in Mesh Explorer.
-  * A new test problem showing a mixed bilinear form for H1, H(curl), H(div) and
-    L2, with partial assembly support in Example 24/24p.
-  * Weak Dirichlet boundary conditions (Nitsche) to the NURBS miniapp.
-
-Data management and Visualization
---------------------------------
- Added support for ADIOS2 for parallel I/O with ParaView visualization. See
-  Examples 5, 9, 12, 16. The classes adios2stream and ADIOS2DataCollection
-  provide the interface to generate ADIOS2 Binary Pack (BP4) directory datasets.
-
- Added VTU output of boundary elements and attributes and parallel VTU (PVTU)
-  output of parallel meshes for visualization using ParaView.
-
-Improved testing
----------------
- Added a GitLab pipeline that automates PR testing on supercomputing systems
-  and Linux clusters at Lawrence Livermore National Lab (LLNL). This can be
-  triggered only by LLNL developers, see .gitlab-ci.yml, the .gitlab directory
-  and the updated CONTRIBUTING.md file.
-
- Added additional testing for convergence, the parallel mesh I/O, and for the
-  libCEED integration in MFEM in the tests/ directory.
-
- Upgraded the Catch unit test framework from version 1.6.1 to version 2.13.0.
-
-Miscellaneous
-------------
- Renamed "Backend::DEBUG" to "Backend::DEBUG_DEVICE" to avoid conflicts,
-  as DEBUG is sometimes used as a macro.
-
- Added a new IterativeSolverMonitor class that allows to monitor the residual
-  and solution with an IterativeSolver after every iteration.
-
- Added power method to iteratively estimate the largest eigenvalue and the
-  corresponding eigenvector of an operator.
-
- Added support for face integrals on the boundaries of NURBS meshes.
-
- In SLISolver, changed the residual inner product from (Br,r) to (Br,Br) so the
-  solver can work with non-SPD preconditioner B.
-
- Added new coefficient and vector coefficient classes for QuadratureFunctions,
-  with new LinearForm integrators which use them.
-
- The integration order used in the ComputeLpError and ComputeElementLpError
-  methods of class GridFunction has been increased.
-
- Change the IntegrationRule inside VectorDiffusionIntegrator to use the same
-  quadrature as DiffusionIntegrator.
-
- The README.html files previously included in several source directories have
-  been removed. Use the corresponding pages at mfem.org instead.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-
-Version 4.1, released on March 10, 2020
-=======================================
-
-Starting with this version, the MFEM open source license is changed to BSD-3.
-
-Improved GPU capabilities
-------------------------
 - Added initial support for AMD GPUs based on HIP: a C++ runtime API and kernel
-  language that can run on both AMD and NVIDIA hardware.
-
- Added support for Umpire, a resource management library that allows the
-  discovery, provision, and management of memory on machines with multiple
-  memory devices like NUMA and GPUs, see https://github.com/LLNL/Umpire.
-
- GPU acceleration is now available in 3 additional examples: 3, 9 and 24.
+  language that can run on both AMD and NVIDIA hardware. With this change, the
+  list of backends is: "occa-cuda", "raja-cuda", "cuda", "hip", "occa-omp",
+  "raja-omp", "omp", "occa-cpu", "raja-cpu", and "cpu".

 - Improved RAJA backend and multi-GPU MPI communications.

- Added a "debug" device designed specifically to aid in debugging GPU code by
-  following the "device" code path (using separate host/device memory spaces and
-  host <-> device transfers) without any GPU hardware.
-
- Added support for matrix-free diagonal smoothers on GPUs.
-
- The current list of available device backends is: "ceed-cuda", "occa-cuda",
-  "raja-cuda", "cuda", "hip", "debug", "occa-omp", "raja-omp", "omp",
-  "ceed-cpu", "occa-cpu", "raja-cpu", and "cpu".
-
- The MFEM memory manager now supports different memory types, associated with
-  the following memory backends:
-  * Default host memory, using standard C++ new and delete,
-  * CUDA pointers, using cudaMalloc and HIP pointers, using hipMalloc,
-  * Managed CUDA/HIP memory (UVM), using cudaMallocManaged/hipMallocManaged,
-  * Umpire-managed memory, including memory pools,
-  * 32- or 64-byte aligned memory, using posix_memalign (WIN32 also supported),
-  * Debug memory with mmap/mprotect protection used by the new "debug" device.
-
-libCEED support
---------------
- Added support for libCEED, the portable library for high-order operator
-  evaluation developed by the Center for Efficient Exascale Discretizations in
-  the Exascale Computing Project, https://github.com/CEED/libCEED.
-
- This initial integration includes Mass and Diffusion integrators. libCEED GPU
-  backends can be used without specific MFEM configuration, however it is highly
-  recommended to use the "cuda" build option to minimize memory transfers.
-
- Both CPU and GPU modes are available as MFEM device backends (ceed-cpu and
-  ceed-cuda), using some of the best performing CPU and GPU backends from
-  libCEED, see the sample runs in examples 1 and 6.
-
- NOTE: The current default libCEED GPU backend (ceed-cuda) uses atomics and
-  therefore is non-deterministic.
-
-Partial assembly and matrix-free discretizations
------------------------------------------------
- The support for matrix-free methods on both CPU and GPU devices based on a
-  partially assembled operator decomposition was extended to include:
-  * DG integrators, (for now only in the Gauss-Lobatto basis), see Example 9,
-  * H(curl) bilinear forms, see Example 3,
-  * vector mass and vector diffusion bilinear integrators,
-  * convection integrator with improved performance,
-  * gradient and vector divergence integrators for Stokes problems,
-  * initial partial assembly mode for NonlinearForms.
-
- Diagonals of partially assembled operators can now be computed efficiently.
-  See the new methods AssembleDiagonal in BilinearForm, AssembleDiagonalPA in
-  BilinearFormIntegrator and the implementations in fem/bilininteg_*.cpp.
-
- In many examples, the partial assembly algorithms provide significantly
-  improved performance, particularly in high-order 3D runs on GPUs.
+Discretization improvements
+---------------------------
+- Added support for non-conforming prism AMR, including coarsening and parallel
+  load balancing. Anisotropic prism refinement is only available in the serial
+  version at the moment.

 Meshing improvements
 --------------------
- The algorithms for mesh element numbering were changed to have significantly
-  better caching and parallel partitioning properties. Both initial (see e.g.
-  Mesh::GetHilbertElementOrdering) and ordering after uniform refinement were
-  improved. NOTE: new ordering can have a round-off effect on solver results.
-
- Added support for non-conforming AMR on both prisms and tetrahedra, including
-  coarsening and parallel load balancing. Anisotropic prism refinement is only
-  available in the serial version at the moment.
-
 - The TMOP mesh optimization algorithms were extended to support r-adaptivity.
  Target matrices can now be constructed either via a given analytical function
  (e.g. spatial dependence of size, aspect ratio, etc., for each element) or via
  a (Par)GridFunction specified on the original mesh.

- The TMOP algorithms were also improved to support non-conforming AMR meshes.
+- The TMOP mesh optimization algorithms have been improved to support AMR meshes.

 - Added support for creating refined versions of periodic meshes, making use of
  the new L2ElementRestriction class. This class also allows for computing
  geometric factors on periodic meshes using partial assembly.

-Discretization improvements
---------------------------
- Added support for GSLIB-FindPoints, a general high-order interpolation utility
-  that can robustly evaluate a GridFunction in an arbitrary collection of points
-  in physical space. See INSTALL for details on building MFEM with GSLIB, and
-  miniapps/gslib for examples of how to use this feature.
-
- Added support for complex-valued finite element operators and fields using a
-  2x2 block structured linear system to mimic complex arithmetic. New classes
-  include: ComplexGridFunction, SesquilinearForm, ComplexLinearForm, and their
-  parallel counterparts.
-
- Added second order derivatives of NURBS shape functions.
-
- Added support for serendipity elements of arbitrary order on affinely-mapped
-  square elements. Basis functions for these elements can be visualized using
-  an option in the display-basis miniapp.
-
- Two integrators related to Stokes problems, (Q grad u, v) and (Q div v, u),
-  where u and the components of v are in H1, were added/modified to support full
-  and partial assembly modes. See the new GradientIntegrator and the updated
-  VectorDivergenceIntegrator classes in fem/bilininteg.hpp, as well as the PA
-  kernels in fem/bilininteg_gradient.cpp and fem/bilininteg_divergence.cpp.
-
- Added a nonlinear vector valued convection integrator (Q u \cdot grad u, v)
-  where u_i and v_i are in H1. This form occurs e.g. in the Navier-Stokes
-  equations. The integrator supports the partial assembly mode for its
-  action. In full assembly mode we also provide the GetGradient method that
-  computes the linearized version of the integrator.
-
- Added a new method, MixedBilinearForm::FormRectangularLinearSystem, that can
-  be used to impose boundary conditions on the non-square off-diagonal blocks of
-  a block operator (similar to FormLinearSystem in the square case).
-
-Linear and nonlinear solvers
----------------------------
- Added support for Ginkgo, a high-performance linear algebra library for GPU
-  and manycore nodes, with a focus on sparse solution of linear systems. For
-  more details see linalg/ginkgo.hpp and the example code in examples/gingko.
-
- Added support for HiOp, a lightweight HPC solver for nonlinear optimization
-  problems, see class HiOpNLPOptimizer and the example codes in examples/hiop.
-
- Added a general interface for specifying and solving nonlinear constrained
-  optimization problems through the new classes OptimizationProblem and
-  OptimizationSolver, see linalg/solver.hpp.
-
- Added a block ILU(0) preconditioner for DG-type discretizations. Example 9
-  (DG advection) now takes advantage of this for implicit time integration.
-
- New time integrators: Adams-Bashforth, Adams-Moulton and several integrators
-  for 2nd order ODEs, see the new Example 23.
-
- Added a LinearSolve(A,X) convenience method to solve dense linear systems. In
-  the trivial cases, i.e., square matrices of size 1 or 2, the system is solved
-  directly, otherwise, LU factorization is employed.
+- Improved element numbering after uniform mesh refinement.

 New and updated examples and miniapps
 -------------------------------------
- Added a collection of 7 playful miniapps in miniapps/toys that illustrate the
-  meshing and visualization features of the library in more relaxed settings.
-  The toys include simulations of cellular automata, Rubik's cube, Mandelbrot
-  set, a tool to convert any image to mfem mesh, and more.
+- The mesh-optimizer and pmesh-optimizer miniapps have been updated to
+  demonstrate the new r-adaptivity capabilities of TMOP.

- Added 8 new example codes:
-  * Example 22/22p demonstrates the use of the new complex-valued finite element
-    operators by defining and solving a family of time-harmonic PDEs related to
-    damped harmonic oscillators.
-  * Example 23 solves a simple 2D/3D wave equation with the new second order
-    time integrators.
-  * Example 24/24p demonstrates usage of mixed finite element spaces in bilinear
-    forms. Partial assembly is supported in this example.
-  * A version of Example 1 in examples/ginkgo demonstrating the use of the
-    Gingko interface to solve a linear system.
-  * A version of Example 9/9p in examples/hiop demonstrating the nonlinear
-    constrained optimization interface and use of the SLBQP and HiOp solvers.
-
- Added two new miniapps: Find Points and Field Diff in miniapps/gslib that show
-  how GSLIB-FindPoints can be used to interpolate a (Par) GridFunction in an
-  arbitrary number of physical space points in 2D and 3D. The GridFunction must
-  be in H1 and in the same space as the mesh that is used to find the points.
-
- Added a simple miniapp, Get Values, that extracts field values at a set of
-  points, from previously saved data via DataCollection classes.
-
- Several examples and miniapps were updated:
-  * Added device support in Example 3/3p and Example 9/9p.
-  * Example 1/1p and Example 3/3p now use diagonal preconditioning in partial
-    assembly mode.
-  * Example 9/9p now supports implicit time integration, using the new block
-    ILU(0) solvers as preconditioners for the linear system.
-  * The mesh-optimizer and pmesh-optimizer miniapps now include the new
-    r-adaptivity capabilities of TMOP. They were also updated to support mesh
-    optimization on non-conforming AMR meshes.
-  * New options to reorder and partition the mesh and boundary attribute
-    visualization (key 'b') are now available in the mesh-explorer miniapp.
-
- Collected object files from the miniapps/common directory into a new library,
-  libmfem-common for the convenience of application developers. The new library
-  is now used in several miniapps in the electromagnetic and tools directories.
-
-Improved testing
----------------
- Added a large number of unit tests in the tests/unit directory, including
-  several parallel unit tests.
-
- Added a new directory, tests/scripts, with several shell scripts that perform
-  simple checks on the code including: code styling, documentation formatting,
-  proper use of .gitignore, and preventing the accidental commit of large files.
-
- It is recommended that developers run the above tests scripts (via the runtest
-  script) before pushing to GitHub. See the README file in tests/scripts.
-
- The Travis CI settings have been updated to include an initial Checks stage
-  which currently runs the code-style, documentation and gitignore test scripts,
-  as well as a final stage for optional checks/tests which currently runs the
-  branch-history script.
+- The (p)mesh-optimizer miniapp has been updated to demonstrate mesh
+  optimization for an AMR mesh.

 Miscellaneous
 -------------
- Added support for output in the ParaView XML format. Both low-order and
-  high-order Lagrange elements are supported. Output can be in ASCII or binary
-  format. The binary output can be compressed if MFEM is compiled with zlib
-  support (MFEM_USE_ZLIB). See the new ParaViewDataCollection class and the
-  updated Examples 5/5p and 9/9p.
-
- Upgraded the SUNDIALS interface to utilize SUNDIALS 5.0. This necessitated a
-  complete rework of the interface and requires changes at the application
-  level. Example usage of the new interface can be found in examples/sundials.
-
- Switched from gzstream to zstr for the implementation of zlib-compressed C++
-  output stream. The build system definition now uses MFEM_USE_ZLIB instead of
-  MFEM_USE_GZSTREAM, but the code interface (e.g. ofgzstream) remains the same.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-API changes
-----------
- In the enum classes MemoryType and MemoryClass, "CUDA" was renamed to "DEVICE"
-  which now denotes either "CUDA" or "HIP" depending on the build configuration.
-  In the same enum classes, "CUDA_UVM" was renamed to "MANAGED".
+- Upgraded the SUNDIALS interface to utilize SUNDIALS version 5.0.  This
+  necessitated a complete rework of the interface and requires changes at
+  the application level.  Example usage of this new interface can be found
+  in the examples/sundials directory.


 Version 4.0, released on May 24, 2019
@@ -638,7 +149,7 @@ Other meshing improvements
  follows precisely the paper:

     D. Arnold, A. Mukherjee, and L. Pouly, "Locally Adapted Tetrahedral Meshes
-     Using Bisection", SIAM J. Sci. Comput. 22 (2000), 431-448.
+     Using Bisection", SIAM J. Sci. Comput. 22 (2000), 431–448.

  This guarantees that the shape regularity of the elements will be preserved
  under refinement.
@@ -783,7 +294,7 @@ Discretization improvements

 - New specialized time integrators: symplectic integrators of orders 1-4 for
  systems of first order ODEs derived from a Hamiltonian and generalized-alpha
-  ODE solver for the filtered Navier-Stokes equations with stabilization. See
+  ODE solver for the filtered Navier–Stokes equations with stabilization. See
  classes SIASolver and GeneralizedAlphaSolver in linalg/ode.hpp.

 - Inherit finite element classes from the new base class TensorBasisElement,
@@ -797,9 +308,6 @@ New and updated examples and miniapps
  incompressible hyperelastic equations. The example demonstrates the use of
  block nonlinear forms as well as custom block preconditioners.

- Added a new serial example (ex23) to demonstrate the use of second order
-  time integration to solve the wave equation.
-
 - Added a new electromagnetics miniapp, Maxwell, for simulating time-domain
  electromagnetics phenomena as a coupled first order system of equations.

@@ -1273,7 +781,7 @@ New and improved linear solvers
  it can only be enabled along with MFEM_USE_MPI. When MFEM is configured with
  MFEM_USE_SUPERLU, one also needs to alter the version of METIS, since SuperLU
  requires ParMETIS (which comes packaged with a serial version of METIS).  See
-  http://crd-legacy.lbl.gov/~xiaoye/SuperLU for SuperLU_DIST details.
+  http://http://crd-legacy.lbl.gov/~xiaoye/SuperLU for SuperLU_DIST details.

 - Added a wrapper for the KLU solver in SuiteSparse see
  http://faculty.cse.tamu.edu/davis/suitesparse.html for details of KLU.
@@ -1,16 +1,15 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

-# The variable CMAKE_CXX_STANDARD and related were introduced in CMake v3.1
-cmake_minimum_required(VERSION 3.1)
+cmake_minimum_required(VERSION 2.8.11)
 set(USER_CONFIG "${CMAKE_CURRENT_SOURCE_DIR}/config/user.cmake" CACHE PATH
  "Path to optional user configuration file.")

@@ -51,7 +50,7 @@ project(mfem NONE)
 # Current version of MFEM, see also `makefile`.
 #   mfem_VERSION = (string)
 #   MFEM_VERSION = (int)   [automatically derived from mfem_VERSION]
-set(${PROJECT_NAME}_VERSION 4.2.1)
+set(${PROJECT_NAME}_VERSION 4.0.1)

 # Prohibit in-source build
 if (${PROJECT_SOURCE_DIR} STREQUAL ${PROJECT_BINARY_DIR})
@@ -90,38 +89,8 @@ enable_language(CXX)
 if (MFEM_USE_CUDA)
   # MFEM_USE_CUDA requires CMake 3.8 or newer (for direct CUDA support)
   cmake_minimum_required(VERSION 3.8 FATAL_ERROR)
-   # Use ${CMAKE_CXX_COMPILER} as the cuda host compiler.
-   if (NOT CMAKE_CUDA_HOST_COMPILER)
-      set(CMAKE_CUDA_HOST_COMPILER ${CMAKE_CXX_COMPILER})
-   endif()
   enable_language(CUDA)
-   set(CMAKE_CUDA_STANDARD 11)
-   set(CMAKE_CUDA_STANDARD_REQUIRED ON)
-   set(CMAKE_CUDA_EXTENSIONS OFF)
-   set(CUDA_FLAGS "--expt-extended-lambda")
-   if (CMAKE_VERSION VERSION_LESS 3.18.0)
-      set(CUDA_FLAGS "-arch=${CUDA_ARCH} ${CUDA_FLAGS}")
-   elseif (NOT CMAKE_CUDA_ARCHITECTURES)
-      string(REGEX REPLACE "^sm_" "" ARCH_NUMBER "${CUDA_ARCH}")
-      if ("${CUDA_ARCH}" STREQUAL "sm_${ARCH_NUMBER}")
-         set(CMAKE_CUDA_ARCHITECTURES "${ARCH_NUMBER}")
-      else()
-         message(FATAL_ERROR "Unknown CUDA_ARCH: ${CUDA_ARCH}")
-      endif()
-   else()
-      set(CUDA_ARCH "CMAKE_CUDA_ARCHITECTURES: ${CMAKE_CUDA_ARCHITECTURES}")
-   endif()
   message(STATUS "Using CUDA architecture: ${CUDA_ARCH}")
-   if (CMAKE_VERSION VERSION_LESS 3.12.0)
-      # CMake versions 3.8 and 3.9 require this to work; 3.10 and 3.11 are not
-      # tested and may not actually need this (but should be ok to keep).
-      set(CUDA_FLAGS "-ccbin=${CMAKE_CXX_COMPILER} ${CUDA_FLAGS}")
-      set(CMAKE_CUDA_HOST_LINK_LAUNCHER ${CMAKE_CXX_COMPILER})
-   endif()
-   set(CMAKE_CUDA_FLAGS "${CUDA_FLAGS}" CACHE STRING
-       "CUDA flags set for MFEM" FORCE)
-   set(CUSPARSE_FOUND TRUE)
-   set(CUSPARSE_LIBRARIES "cusparse")
 endif()

 if (XSDK_ENABLE_C)
@@ -180,13 +149,9 @@ if (MFEM_USE_MPI)
      message(FATAL_ERROR "PETSc version >= 3.8.0 is required")
    endif()
    set(PETSC_INCLUDE_DIRS ${PETSC_INCLUDES})
-    if (MFEM_USE_SLEPC)
-      find_package(SLEPc REQUIRED config)
-      message(STATUS "Found SLEPc version ${SLEPC_VERSION}")
-    endif()
  endif()
 else()
-  set(PKGS_NEED_MPI SUPERLU MUMPS PETSC SLEPC STRUMPACK PUMI)
+  set(PKGS_NEED_MPI SUPERLU PETSC STRUMPACK PUMI)
  foreach(PKG IN LISTS PKGS_NEED_MPI)
    if (MFEM_USE_${PKG})
      message(STATUS "Disabling package ${PKG} - requires MPI")
@@ -199,17 +164,8 @@ if (MFEM_USE_METIS)
  find_package(METIS REQUIRED)
 endif()

-if (MFEM_USE_GINKGO)
-  find_package(Ginkgo REQUIRED)
-  if (Ginkgo_FOUND)
-    get_target_property(Ginkgo_INCLUDE_DIRS
-      Ginkgo::ginkgo INTERFACE_INCLUDE_DIRECTORIES)
-    set(Ginkgo_LIBRARIES Ginkgo::ginkgo)
-  endif()
-endif()
-
-# zlib
-if (MFEM_USE_ZLIB)
+# GZSTREAM -> zlib
+if (MFEM_USE_GZSTREAM)
  find_package(ZLIB REQUIRED)
 endif()

@@ -241,14 +197,12 @@ endif()

 # SUNDIALS
 if (MFEM_USE_SUNDIALS)
-  set(SUNDIALS_COMPONENTS CVODES ARKODE KINSOL NVector_Serial)
-  if (MFEM_USE_MPI)
-    list(APPEND SUNDIALS_COMPONENTS NVector_Parallel NVector_MPIPlusX)
+  if (NOT MFEM_USE_MPI)
+    find_package(SUNDIALS REQUIRED NVector_Serial CVODE ARKODE KINSOL)
+  else()
+    find_package(SUNDIALS REQUIRED
+      NVector_Serial NVector_Parallel NVector_ParHyp CVODE ARKODE KINSOL)
  endif()
-  if (MFEM_USE_CUDA)
-    list(APPEND SUNDIALS_COMPONENTS NVector_Cuda)
-  endif()
-  find_package(SUNDIALS REQUIRED ${SUNDIALS_COMPONENTS})
 endif()

 # Mesquite
@@ -265,15 +219,6 @@ if (MFEM_USE_SUPERLU)
  endif()
 endif()

-# MUMPS can only be enabled in parallel
-if (MFEM_USE_MUMPS)
-  if (MFEM_USE_MPI)
-    find_package(MUMPS REQUIRED mumps_common pord)
-  else()
-    message(FATAL_ERROR " *** MUMPS requires that MPI be enabled.")
-  endif()
-endif()
-
 # STRUMPACK can only be enabled in parallel
 if (MFEM_USE_STRUMPACK)
  if (MFEM_USE_MPI)
@@ -283,16 +228,16 @@ if (MFEM_USE_STRUMPACK)
  endif()
 endif()

+# Gecko
+if (MFEM_USE_GECKO)
+  find_package(Gecko REQUIRED)
+endif()
+
 # GnuTLS
 if (MFEM_USE_GNUTLS)
  find_package(_GnuTLS REQUIRED)
 endif()

-# GSLIB
-if (MFEM_USE_GSLIB)
-  find_package(GSLIB REQUIRED)
-endif()
-
 # NetCDF
 if (MFEM_USE_NETCDF)
  find_package(NetCDF REQUIRED)
@@ -303,14 +248,6 @@ if (MFEM_USE_MPFR)
  find_package(MPFR REQUIRED)
 endif()

-if (MFEM_USE_CEED)
-  find_package(libCEED REQUIRED)
-endif()
-
-if (MFEM_USE_AMGX)
-  find_package(AMGX REQUIRED)
-endif()
-
 if (MFEM_USE_CONDUIT)
    find_package(Conduit REQUIRED conduit relay blueprint )
 endif()
@@ -336,10 +273,19 @@ if (MFEM_USE_PUMI)
  endif()
 endif()

-# HiOp optimizer
-if (MFEM_USE_HIOP)
-  find_package(HIOP REQUIRED)
-  # find_package updates HIOP_FOUND, HIOP_INCLUDE_DIRS, HIOP_LIBRARIES
+# CUDA
+if (MFEM_USE_CUDA)
+   set(CMAKE_CUDA_STANDARD 11)
+   set(CMAKE_CUDA_STANDARD_REQUIRED ON)
+   set(CMAKE_CUDA_EXTENSIONS OFF)
+   set(CMAKE_CUDA_FLAGS "-arch=${CUDA_ARCH} --expt-extended-lambda"
+       CACHE STRING "CUDA flags set for MFEM" FORCE)
+   if (MFEM_USE_MPI)
+      set(CUDA_CCBIN_COMPILER ${MPI_CXX_COMPILER})
+   else()
+      set(CUDA_CCBIN_COMPILER ${CMAKE_CXX_COMPILER})
+   endif()
+   string(APPEND CMAKE_CUDA_FLAGS " -ccbin ${CUDA_CCBIN_COMPILER}")
 endif()

 # OCCA
@@ -352,22 +298,6 @@ if (MFEM_USE_RAJA)
   find_package(RAJA REQUIRED)
 endif()

-# UMPIRE
-if (MFEM_USE_UMPIRE)
-   find_package(UMPIRE REQUIRED)
-endif()
-
-# ADIOS2 for parallel I/O
-if (MFEM_USE_ADIOS2)
-   find_package(ADIOS2 REQUIRED)
-endif()
-
-if (MFEM_USE_MKL_CPARDISO)
-  if (MFEM_USE_MPI)
-   find_package(MKL_CPARDISO REQUIRED MKL_SEQUENTIAL MKL_LP64 MKL_MPI_WRAPPER)
-  endif()
-endif()
-
 # MFEM_TIMER_TYPE
 if (NOT DEFINED MFEM_TIMER_TYPE)
  if (APPLE)
@@ -392,9 +322,8 @@ endif()
 #    integers, the METIS header (with 32-bit indices, as used by mfem) needs to
 #    be before SuiteSparse.
 set(MFEM_TPLS MPI_CXX OPENMP BLAS LAPACK METIS HYPRE SuiteSparse SUNDIALS PETSC
-    SLEPC MESQUITE SuperLUDist MUMPS STRUMPACK AXOM CONDUIT Ginkgo GNUTLS GSLIB NETCDF
-    MPFR PUMI HIOP POSIXCLOCKS MFEMBacktrace ZLIB OCCA CEED RAJA UMPIRE ADIOS2
-    CUSPARSE MKL_CPARDISO AMGX)
+    MESQUITE SuperLUDist STRUMPACK AXOM CONDUIT GECKO GNUTLS NETCDF MPFR PUMI
+    POSIXCLOCKS MFEMBacktrace ZLIB OCCA RAJA)
 # Add all *_FOUND libraries in the variable TPL_LIBRARIES.
 set(TPL_LIBRARIES "")
 set(TPL_INCLUDE_DIRS "")
@@ -606,13 +535,6 @@ if (MFEM_USE_OCCA)
    FILES_MATCHING PATTERN "*.okl")
 endif()

-# Install the libCEED files
-if (MFEM_USE_CEED)
-  install(DIRECTORY ${MFEM_SOURCE_DIRS}
-    DESTINATION ${INSTALL_INCLUDE_DIR}/mfem
-    FILES_MATCHING PATTERN "fem/libceed/*.h")
-endif()
-
 # Install ${HEADERS}
 # ---
 # foreach (HDR ${HEADERS})
@@ -1,39 +1,33 @@
 <p align="center">
-<a href="https://mfem.org/"><img alt="mfem" src="https://mfem.org/img/logo-300.png"></a>
+<a href="http://mfem.org/"><img alt="mfem" src="http://mfem.org/img/logo-300.png"></a>
 </p>

 <p align="center">
-<a href="https://github.com/mfem/mfem/blob/master/LICENSE"><img alt="License" src="https://img.shields.io/badge/License-BSD-brightgreen.svg"></a>
+<a href="https://github.com/mfem/mfem/blob/master/COPYRIGHT"><img alt="License" src="https://img.shields.io/badge/License-LGPL--2.1-brightgreen.svg"></a>
 <a href="https://travis-ci.org/mfem/mfem"><img alt="Build Status" src="https://travis-ci.org/mfem/mfem.svg?branch=master"></a>
 <a href="https://ci.appveyor.com/project/mfem/mfem"><img alt="Build Status" src="https://ci.appveyor.com/api/projects/status/19non9sqm6msi2wy?svg=true"></a>
-<a href="https://mfem.github.io/doxygen/html/index.html"><img alt="Doxygen" src="https://img.shields.io/badge/code-documented-brightgreen.svg"></a>
+<a href="http://mfem.github.io/doxygen/html/index.html"><img alt="Doxygen" src="https://img.shields.io/badge/code-documented-brightgreen.svg"></a>
 </p>


 # How to Contribute

-The MFEM team welcomes contributions at all levels: bugfixes; code improvements;
-simplifications; new mesh, discretization or solver capabilities; improved
-documentation; new examples and miniapps; HPC performance improvements; etc.
+The MFEM team welcomes contributions at all levels: bugfixes; code
+improvements; simplifications; new mesh, discretization or solver
+capabilities; improved documentation; new examples and miniapps;
+HPC performance improvements; ...

-MFEM is distributed under the terms of the BSD-3 license. All new contributions
-must be made under this license.
-
-If you plan on contributing to MFEM, consider reviewing the
-[issue tracker](https://github.com/mfem/mfem/issues) first to check if a thread
-already exists for your desired feature or the bug you ran into. Use a pull
-request (PR) toward the `mfem:master` branch to propose your contribution. If
-you are planning significant code changes or have questions, you may want to
-open an [issue](https://github.com/mfem/mfem/issues) before issuing a PR. In
-addition to technical contributions, we are also interested in your results and
-[simulation images](https://mfem.org/gallery/), which you can share via a pull
-request in the [mfem/web](https://github.com/mfem/web) repo.
+Use a pull request (PR) toward the `mfem:master` branch to propose your
+contribution. If you are planning significant code changes, or have any
+questions, you can also open an [issue](https://github.com/mfem/mfem/issues)
+before issuing a PR.  We also welcome your [simulation
+images](http://mfem.org/gallery/), which you can submit via a pull request in
+[mfem/web](https://github.com/mfem/web).

 See the [Quick Summary](#quick-summary) section for the main highlights of our
 GitHub workflow. For more details, consult the following sections and refer
 back to them before issuing pull requests:

- [Quick Summary](#quick-summary)
 - [Code Overview](#code-overview)
 - [GitHub Workflow](#github-workflow)
  - [MFEM Organization](#mfem-organization)
@@ -51,7 +45,7 @@ back to them before issuing pull requests:
 Contributing to MFEM requires knowledge of Git and, likely, finite elements. If
 you are new to Git, see the [GitHub learning
 resources](https://help.github.com/articles/git-and-github-learning-resources/).
-To learn more about the finite element method, see our [FEM page](https://mfem.org/fem).
+To learn more about the finite element method, see our [FEM page](http://mfem.org/fem).

 *By submitting a pull request, you are affirming the [Developer's Certificate of
 Origin](#developers-certificate-of-origin-11) at the end of this file.*
@@ -65,12 +59,6 @@ Origin](#developers-certificate-of-origin-11) at the end of this file.*
  with regards to documentation and code styling.
 - Pull requests  should be issued toward `mfem:master`. Make sure
  to check the items off the [Pull Request Checklist](#pull-request-checklist).
- When your contribution is fully working and ready to be reviewed, add
-  the `ready-for-review` label.
- PRs are treated similarly to journal submission with an "editor" assigning two
-  reviewers to evaluate the changes.
- The reviewers have 3 weeks to evaluate the PR and work with the author to
-  fix issues and implement improvements.
 - After approval, MFEM developers merge the PR manually in the [mfem:next branch](#masternext-workflow).
 - After a week of testing in `mfem:next`, the original PR is merged in `mfem:master`.
 - We use [milestones](https://github.com/mfem/mfem/milestones) to coordinate the
@@ -80,133 +68,116 @@ Origin](#developers-certificate-of-origin-11) at the end of this file.*

 ### Code Overview

-#### Source code structure:
+- The MFEM library uses object-orient design principles which reflect, in code,
+  the independent mathematical concepts of meshing, linear algebra and finite
+  element spaces and operators.

-The MFEM library uses object-oriented design principles which reflect, in code,
-the independent mathematical concepts of meshing, linear algebra and finite
-element spaces and operators.
-
-The MFEM source code has the following structure:
-
-```
+- The MFEM source code has the following structure:
+  ```
  .
  ├── config
  │   └── cmake
-  │       └── ...
+  │       └── modules
  ├── data
  ├── doc
+  │   └── web
+  │       └── examples
  ├── examples
-  │   ├── amgx
-  │   ├── ginkgo
-  │   ├── hiop
  │   ├── petsc
  │   ├── pumi
-  │   ├── sundials
-  |   └── superlu
+  │   └── sundials
  ├── fem
-  │   └── libceed
  ├── general
  ├── linalg
-  │   └── simd
  ├── mesh
  ├── miniapps
-  │   ├── adjoint
  │   ├── common
  │   ├── electromagnetics
-  │   ├── gslib
  │   ├── meshing
-  │   ├── navier
  │   ├── nurbs
  │   ├── performance
-  │   ├── tools
-  │   └── toys
+  │   └── tools
  └── tests
-      ├── convergence
-      ├── par-mesh-format
-      ├── scripts
-      └── unit
-          └── ...
-```
+      ├── unit
+      │   ├── ...
+      └── ...

-#### Main directories and classes
+  ```

-The main directories are `fem/`, `mesh/` and `linalg/` containing the C++
-classes implementing the finite element, mesh and linear algebra concepts
-respectively.
+- The main directories are `fem/`, `mesh/` and `linalg/` containing the C++
+  classes implementing the finite element, mesh and linear algebra concepts
+  respectively.

 - The main mesh classes are:
-  + [`Mesh`](https://mfem.github.io/doxygen/html/classmfem_1_1Mesh.html)
-  + [`NCMesh`](https://mfem.github.io/doxygen/html/classmfem_1_1NCMesh.html)
-  + [`Element`](https://mfem.github.io/doxygen/html/classmfem_1_1Element.html)
-  + [`ElementTransformation`](https://mfem.github.io/doxygen/html/classmfem_1_1ElementTransformation.html)
+  + [`Mesh`](http://mfem.github.io/doxygen/html/classmfem_1_1Mesh.html)
+  + [`NCMesh`](http://mfem.github.io/doxygen/html/classmfem_1_1NCMesh.html)
+  + [`Element`](http://mfem.github.io/doxygen/html/classmfem_1_1Element.html)
+  + [`ElementTransformation`](http://mfem.github.io/doxygen/html/classmfem_1_1ElementTransformation.html)

 - The main finite element classes are:
-  + [`FiniteElement`](https://mfem.github.io/doxygen/html/classmfem_1_1FiniteElement.html)
-  + [`FiniteElementCollection`](https://mfem.github.io/doxygen/html/classmfem_1_1FiniteElement.html)
-  + [`FiniteElementSpace`](https://mfem.github.io/doxygen/html/classmfem_1_1FiniteElementSpace.html)
-  + [`GridFunction`](https://mfem.github.io/doxygen/html/classmfem_1_1GridFunction.html)
-  + [`BilinearFormIntegrator`](https://mfem.github.io/doxygen/html/classmfem_1_1BilinearFormIntegrator.html) and [`LinearFormIntegrator`](https://mfem.github.io/doxygen/html/classmfem_1_1LinearFormIntegrator.html)
-  + [`LinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1LinearFormIntegrator.html), [`BilinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html) and [`MixedBilinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1MixedBilinearForm.html)
+  + [`FiniteElement`](http://mfem.github.io/doxygen/html/classmfem_1_1FiniteElement.html)
+  + [`FiniteElementCollection`](http://mfem.github.io/doxygen/html/classmfem_1_1FiniteElement.html)
+  + [`FiniteElementSpace`](http://mfem.github.io/doxygen/html/classmfem_1_1FiniteElementSpace.html)
+  + [`GridFunction`](http://mfem.github.io/doxygen/html/classmfem_1_1GridFunction.html)
+  + [`BilinearFormIntegrator`](http://mfem.github.io/doxygen/html/classmfem_1_1BilinearFormIntegrator.html) and [`LinearFormIntegrator`](http://mfem.github.io/doxygen/html/classmfem_1_1LinearFormIntegrator.html)
+  + [`LinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1LinearFormIntegrator.html), [`BilinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html) and [`MixedBilinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1MixedBilinearForm.html)

 - The main linear algebra classes and sources are
-  + [`Operator`](https://mfem.github.io/doxygen/html/classmfem_1_1Operator.html) and [`BilinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html)
-  + [`Vector`](https://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html) and [`LinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1LinearForm.html)
-  + [`DenseMatrix`](https://mfem.github.io/doxygen/html/classmfem_1_1DenseMatrix.html) and [`SparseMatrix`](https://mfem.github.io/doxygen/html/classmfem_1_1SparseMatrix.html)
-  + Sparse [smoothers](https://mfem.github.io/doxygen/html/sparsesmoothers_8hpp.html) and linear [solvers](https://mfem.github.io/doxygen/html/solvers_8hpp.html)
+  + [`Operator`](http://mfem.github.io/doxygen/html/classmfem_1_1Operator.html) and [`BilinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html)
+  + [`Vector`](http://mfem.github.io/doxygen/html/classmfem_1_1BilinearForm.html) and [`LinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1LinearForm.html)
+  + [`DenseMatrix`](http://mfem.github.io/doxygen/html/classmfem_1_1DenseMatrix.html) and [`SparseMatrix`](http://mfem.github.io/doxygen/html/classmfem_1_1SparseMatrix.html)
+  + Sparse [smoothers](http://mfem.github.io/doxygen/html/sparsesmoothers_8hpp.html) and linear [solvers](http://mfem.github.io/doxygen/html/solvers_8hpp.html)

-#### Parallel implementation
-
-Parallel MPI objects in MFEM inherit their serial counterparts, so a parallel
-mesh for example is just a serial mesh on each task plus the information on
-shared geometric entities between different tasks. The parallel source files
-have a `p` prefix, e.g. `pmesh.cpp` vs. the serial `mesh.cpp`.
+- Parallel MPI objects in MFEM inherit their serial counterparts, so a parallel
+  mesh for example is just a serial mesh on each task plus the information on
+  shared geometric entities between different tasks. The parallel source files
+  have a `p` prefix, e.g. `pmesh.cpp` vs. the serial `mesh.cpp`.

 - The main parallel classes are
-  + [`ParMesh`](https://mfem.github.io/doxygen/html/solvers_8hpp.html)
-  + [`ParNCMesh`](https://mfem.github.io/doxygen/html/classmfem_1_1ParMesh.html)
-  + [`ParFiniteElementSpace`](https://mfem.github.io/doxygen/html/classmfem_1_1ParFiniteElementSpace.html)
-  + [`ParGridFunction`](https://mfem.github.io/doxygen/html/classmfem_1_1ParGridFunction.html)
-  + [`ParBilinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1ParBilinearForm.html) and [`ParLinearForm`](https://mfem.github.io/doxygen/html/classmfem_1_1ParLinearForm.html)
-  + [`HypreParMatrix`](https://mfem.github.io/doxygen/html/classmfem_1_1HypreParMatrix.html) and [`HypreParVector`](https://mfem.github.io/doxygen/html/classmfem_1_1HypreParVector.html)
-  + [`HypreSolver`](https://mfem.github.io/doxygen/html/classmfem_1_1HypreSolver.html) and other [hypre classes](https://mfem.github.io/doxygen/html/hypre_8hpp.html)
+  + [`ParMesh`](http://mfem.github.io/doxygen/html/solvers_8hpp.html)
+  + [`ParNCMesh`](http://mfem.github.io/doxygen/html/classmfem_1_1ParMesh.html)
+  + [`ParFiniteElementSpace`](http://mfem.github.io/doxygen/html/classmfem_1_1ParFiniteElementSpace.html)
+  + [`ParGridFunction`](http://mfem.github.io/doxygen/html/classmfem_1_1ParGridFunction.html)
+  + [`ParBilinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1ParBilinearForm.html) and [`ParLinearForm`](http://mfem.github.io/doxygen/html/classmfem_1_1ParLinearForm.html)
+  + [`HypreParMatrix`](http://mfem.github.io/doxygen/html/classmfem_1_1HypreParMatrix.html) and [`HypreParVector`](http://mfem.github.io/doxygen/html/classmfem_1_1HypreParVector.html)
+  + [`HypreSolver`](http://mfem.github.io/doxygen/html/classmfem_1_1HypreSolver.html) and other [hypre classes](http://mfem.github.io/doxygen/html/hypre_8hpp.html)

-#### GPU and general device support
-
-GPU and multi-core CPU support is based on device kernels supporting different
-backends (CUDA, OCCA, RAJA, OpenMP, etc.) and an internal lightweight
-device/host memory manager.
+- GPU and multi-core CPU support is based on device kernels supporting different
+  backends (CUDA, OCCA, RAJA, OpenMP, etc.) and an internal lightweight
+  device/host memory manager.

 - The main device-relevant classes and sources are:
-  + [`Device`](https://mfem.github.io/doxygen/html/device_8hpp.html)
-  + [`MemoryManager`](https://mfem.github.io/doxygen/html/mem_manager_8hpp.html)
-  + the [`MFEM_FORALL`](https://mfem.github.io/doxygen/html/forall_8hpp.html) macro
-  + the [`cuda.hpp`](https://mfem.github.io/doxygen/html/cuda_8hpp.html) and [`occa.hpp`](https://mfem.github.io/doxygen/html/occa_8hpp.html) files
+  + [`Device`](http://mfem.github.io/doxygen/html/device_8hpp.html)
+  + [`MemoryManager`](http://mfem.github.io/doxygen/html/mem_manager_8hpp.html)
+  + the [`MFEM_FORALL`](http://mfem.github.io/doxygen/html/forall_8hpp.html) macro
+  + the [`cuda.hpp`](http://mfem.github.io/doxygen/html/cuda_8hpp.html) and [`occa.hpp`](http://mfem.github.io/doxygen/html/occa_8hpp.html) files

-#### Utilities, building and documentation
 - The `general/` directory contains C++ classes that serve as utilities for
  communication, error handling, arrays, (Boolean) tables, timing, etc.
+
 - The `config/` directory contains build-related files, both for the plain
  Makefile and the CMake build options.
- The `doc/` directory contains configuration for the Doxygen code documentation
-  that can either be built locally or browsed online at
-  https://mfem.github.io/doxygen/html/index.html.

-#### Examples and tests
- `examples` and `miniapps` respectively gather simple and more fully-featured
-  demonstrations of the usage on MFEM. They both rely on `data/` for the
-  collection of meshes.
+- The `doc/` directory contains configuration for the Doxygen code documentation
+  that can either be build locally, or browsed online at
+  http://mfem.github.io/doxygen/html/index.html.
+
+- The `data/` directory contains a collection of small mesh files, that are used
+  in the simple example codes and more fully-featured mini applications in the
+  `examples/` and `miniapps/` directories.
+
 - The `tests/` directory contains a unit test suite and will later contain more
  tests that run example codes.

-See also the [code overview](https://mfem.org/code-overview/) section on the MFEM
-website.
+- See also the [code overview](http://mfem.org/code-overview/) section on the
+  MFEM website.

 ## GitHub Workflow

-The MFEM GitHub organization: https://github.com/mfem, is the main developer hub
-for the MFEM project.
+The GitHub organization, https://github.com/mfem, is the main developer hub for
+the MFEM project.

-If you plan to make contributions or would like to stay up-to-date with changes
+If you plan to make contributions or will like to stay up-to-date with changes
 in the code, *we strongly encourage you to [join the MFEM organization](#mfem-organization)*.

 This will simplify the workflow (by providing you additional permissions), and
@@ -215,31 +186,34 @@ will allow us to reach you directly with project announcements.

 ### MFEM Organization

-#### Getting started (GitHub)
-Before you can start, you need a GitHub account, here are a few suggestions:
-  + Create the account at: [github.com/join](https://github.com/join).
-  + For easy identification, please add your full name and maybe a picture of you at:
-    https://github.com/settings/profile.
+- Before you can start, you need a GitHub account, here are a few suggestions:
+  + Create the account at: github.com/join.
+  + For easy identification, please add your name and maybe a picture of you at: https://github.com/settings/profile.
  + To receive notification, set a primary email at: https://github.com/settings/emails.
  + For password-less pull/push over SSH, add your SSH keys at: https://github.com/settings/keys.

-#### Joining
 - [Contact us](#contact-information) for an invitation to join the MFEM GitHub
-  organization. You will receive an invitation email, which you can directly accept.
+  organization.
+
+- You should receive an invitation email, which you can directly accept.
  Alternatively, *after logging into GitHub*, you can accept the invitation at
  the top of https://github.com/mfem.
+
 - Consider making your membership public by going to https://github.com/orgs/mfem/people
-  and clicking on the organization visibility drop box next to your name.
+  and clicking on the organization visibility dropbox next to your name.
+
 - Project discussions and announcements will be posted at
  https://github.com/orgs/mfem/teams/everyone.

-#### Structure
 - The MFEM source code is in the [mfem](https://github.com/mfem/mfem)
  repository.
+
 - The website and corresponding documentation are in the
  [web](https://github.com/mfem/web) repository.
+
 - The [PyMFEM](https://github.com/mfem/PyMFEM) repository contains a Python
  wrapper for MFEM.
+
 - The [data](https://github.com/mfem/data) repository contains additional
  (large) datafiles for MFEM.

@@ -247,9 +221,9 @@ Before you can start, you need a GitHub account, here are a few suggestions:
 ### New Feature Development

 - A new feature should be important enough that at least one person, the
-  author, is willing to work on it and be its champion.
+  proposer, is willing to work on it and be its champion.

- The author creates a branch for the new feature (with suffix `-dev`), off
+- The proposer creates a branch for the new feature (with suffix `-dev`), off
  the `master` branch, or another existing feature branch, for example:

  ```
@@ -292,13 +266,12 @@ Before you can start, you need a GitHub account, here are a few suggestions:
  - Lean code base is easier to understand by new collaborators.
  - New features should be added only if they are necessary or generally useful.
  - Introduction of language constructions not currently used in MFEM should be
-    justified and generally avoided (to maintain portability to various systems
-    and compilers, including early access hardware).
+    justified and generally avoided (so we can build on cutting-edge systems).
  - We prefer basic C++ and the C++03 standard, to keep the code readable by
    a large audience and to make sure it compiles anywhere.

 - *Keep the code general and reasonably efficient*
-  - The main goal is fast prototyping for research and application development.
+  - Main goal is fast prototyping for research.
  - When in doubt, generality wins over efficiency.
  - Respect the needs of different users (current and/or future).

@@ -341,41 +314,15 @@ Before you can start, you need a GitHub account, here are a few suggestions:

     `[DISCUSS] Hybridized DG [hdg-dev]`

- If the PR is still a work in progress, add the `WIP` label to it and
-  optionally the `[WIP]` prefix in the title.
-
 - Add a description, appropriate labels and assign yourself to the PR. The MFEM
  team will add reviewers as appropriate.

 - List outstanding TODO items in the description, see PR #222 for an example.

- When your contribution is fully working and ready to be reviewed, add
-  the `ready-for-review` label.
-
- PRs are treated similarly to journal submission with an "editor" assigning
-  two reviewers to evaluate the changes. The reviewers have 3 weeks to evaluate
-  the PR and work with the author to implement improvements and fix issues.
-
- After approval, the PR is [tested](#masternext-workflow) for a week with
-  other approved PRs in the `mfem:next` branch.
-
- Consider manually running the tests in `tests/scripts` before merging in
-  `mfem:next`, see the [README](tests/scripts/README) file in that directory
-  for more details.
-
 - Track the Travis CI and Appveyor [continuous integration](#automated-testing)
-  builds at the end of the PR. These should generally run clean, so address any
-  errors as soon as possible. Please ask if you are unsure how to do that.
+  builds at the end of the PR. These should run clean, so address any errors as
+  soon as possible.

- Note that some tests, such as the `branch-history` check in Travis are
-  safeguards that are allowed to fail in certain cases.
-
- Other tests, such as the `code-style`, `documentation` and `gitignore`
-  checks in Travis enforce MFEM-specific rules which are explained in the
-  error messages and the `tests/scripts` directory.
-
- If triggered, track the status of the LLNL GitLab tests. If failing, ask
-  one of the _LLNL developers_ for details.

 ### Pull Request Checklist

@@ -387,18 +334,14 @@ Before a PR can be merged, it should satisfy the following:
    - [ ] Is this a new feature users need to be aware of? New or updated example or miniapp?
    - [ ] Does it make sense to create a new section in the `CHANGELOG` to group with other related features?
 - [ ] Update `INSTALL`:
-    - [ ] Had a new optional library been added? If so, what range of versions of this library are required? (*Make sure the external library is compatible with our BSD license, e.g. it is not licensed under GPL!*)
-    - [ ] Have the version ranges for any required or optional libraries changed?
+    - [ ] Had a new optional library been added? (*Make sure the external library is licensed under LGPL, not GPL!*)
    - [ ] Does `make` or `cmake` have a new target?
    - [ ] Did the requirements or the installation process change? *(rare)*
- [ ] Update continuous integration server configurations if necessary (e.g. with new version requirements for each of MFEM's dependencies)
-    - [ ] `.travis.yml`
-    - [ ] `.appveyor.yml`
 - [ ] Update `.gitignore`:
-    - [ ] Check if `make distclean; git status` shows any files that were generated from the source by the project (not an IDE) but we don't want to track in the repository.
+    - [ ] Check if `make distclean; git status` shows any files that are generated from the source but we don't want to track in the repository.
    - [ ] Add new patterns (just for the new files above) and re-run the above test.
 - [ ] New examples:
-    - [ ] All sample runs at the top of the example source file work.
+    - [ ] All sample runs at the top of the example work.
    - [ ] Update `examples/makefile`:
      - [ ] Add the example code to the appropriate `SEQ_EXAMPLES` and `PAR_EXAMPLES` variables.
      - [ ] Add any files generated by it to the `clean` target.
@@ -407,14 +350,13 @@ Before a PR can be merged, it should satisfy the following:
      - [ ] Add the example code to the `ALL_EXE_SRCS` variable.
      - [ ] Make sure `THIS_TEST_OPTIONS` is set correctly for the new example.
   - [ ] List the new example in `doc/CodeDocumentation.dox`.
-   - [ ] If new examples directory (e.g.`examples/pumi`), list it in `doc/CodeDocumentation.conf.in`
   - [ ] Companion pull request for documentation in [mfem/web](https://github.com/mfem/web) repo:
      - [ ] Update or add example-specific documentation, see e.g. the `src/examples.md`.
      - [ ] Add the description, labels and screenshots in `src/examples.md` and `src/img`.
      - [ ] In `examples.md`, list the example under the appropriate categories, add new categories if necessary.
      - [ ] Add a short description of the example in the "Extensive Examples" section of `features.md`.
 - [ ] New miniapps:
-   - [ ] All sample runs at the top of the miniapp source file work.
+   - [ ] All sample runs at the top of the miniapp work.
   - [ ] Update top-level `makefile` and `makefile` in corresponding miniapp directory.
   - [ ] Add the miniapp binary and any files generated by it to the top-level `.gitignore` file.
   - [ ] Update CMake build system:
@@ -422,7 +364,6 @@ Before a PR can be merged, it should satisfy the following:
      - [ ] Add/update the `CMakeLists.txt` file in the new miniapp directory.
      - [ ] Consider adding a new test for the new miniapp.
   - [ ] List the new miniapp in `doc/CodeDocumentation.dox`
-   - [ ] If new miniapps directory (e.g.`miniapps/nurbs`), list it in `doc/CodeDocumentation.conf.in`
   - [ ] Companion pull request for documentation in [mfem/web](https://github.com/mfem/web) repo:
     - [ ] Update or add miniapp-specific documentation, see e.g. the `src/meshing.md` and `src/electromagnetics.md` files.
     - [ ] Add the description, labels and screenshots in `src/examples.md` and `src/img`.
@@ -432,13 +373,18 @@ Before a PR can be merged, it should satisfy the following:
   - [ ] All significant new classes, methods and functions have Doxygen-style documentation in source comments.
   - [ ] Consider adding new sample runs in existing examples to highlight the new capability.
   - [ ] Consider saving cool simulation pictures with the new capability in the Confluence gallery (LLNL only) or submitting them, via pull request, to the gallery section of the `mfem/web` repo.
-   - [ ] If this is a major new feature, consider mentioning it in the short summary inside `README` *(rare)*.
+   - [ ] If this is a major new feature, consider mentioning in the short summary inside `README` *(rare)*.
   - [ ] List major new classes in `doc/CodeDocumentation.dox` *(rare)*.
 - [ ] Update this checklist, if the new pull request affects it.
- [ ] Run `make unittest` to make sure all unit tests pass.
- [ ] Run the tests in `tests/scripts`.
+- [ ] Run the unit tests and make sure they all pass `make unittest`.
+- [ ] (LLNL only) Clone the `tests` repository and run the following tests, see `mfem/tests/README.md`:
+   - [ ] `compilers`
+   - [ ] `memcheck`
+   - [ ] `documentation`
 - [ ] (LLNL only) After merging:
-   - [ ] Update internal tests to include the new features.
+   - [ ] Regenerate `README.html` files from companion documentation pull requests.
+   - [ ] Update the `baseline` and `compiler` tests, add new tests if necessary.
+   - [ ] Consider updating the script `mfem/tests/sample-runs` (`sample-runs-serial` and `sample-runs-parallel`).

 ### Master/Next Workflow

@@ -497,7 +443,7 @@ MFEM uses a `master`/`next`-branch workflow as described below:
  (replace `3.3.2` with current release):
  - Rename the current `next` branch to `next-pre-v3.3.2`.
  - Create a new `next` branch starting from the `v3.3.2` release.
-  - Local copies of `next` can then be updated with `git fetch origin next && git checkout -B next origin/next`.
+  - Local copies of `next` can then be updated with `git checkout -B next origin/next`.

 ### Release Checklist

@@ -506,14 +452,7 @@ MFEM uses a `master`/`next`-branch workflow as described below:
    - [ ] `makefile`
    - [ ] `CMakeLists.txt`
    - [ ] `doc/CodeDocumentation.conf.in`
- [ ] Check that version requirements for each of MFEM's dependencies are documented in `INSTALL` and up-to-date
- [ ] Check that continuous integration server configurations reflect the dependency version requirements of the new release
-    - [ ] `.travis.yml`
-    - [ ] `.appveyor.yml`
- [ ] Update the `CHANGELOG` to organize all release contributions
- [ ] Review the whole source code once over
- [ ] Ask MFEM-based applications to test the pre-release branch
- [ ] Test on additional platforms and compilers
+- [ ] (LLNL only) Make sure all `README.html` files in the source repo are up to date.
 - [ ] Tag the repository:

  ```
@@ -523,17 +462,16 @@ MFEM uses a `master`/`next`-branch workflow as described below:
 - [ ] Create the release tarball and push to `mfem/releases`.
 - [ ] Recreate the `next` branch as described in previous section.
 - [ ] Update and push documentation  to `mfem/doxygen`.
- [ ] Update URL shortlinks:
-    - [ ] Create a shortlink at [http://bit.ly/](http://bit.ly/) for the release tarball, e.g. https://mfem.github.io/releases/mfem-3.1.tgz.
-    - [ ] (LLNL only) Add and commit the new shortlink in the `links` and `links-mfem` files of the internal `mfem/downloads` repo.
+- [ ] Update URL shorlinks:
+    - [ ] Create a shortlink at [https://goo.gl/](https://goo.gl/) for the release tarball, e.g. http://mfem.github.io/releases/mfem-3.1.tgz.
+    - [ ] (LLNL only) Add and commit the new shorlink in the `links` and `links-mfem` files of the internal `mfem/downloads` repo.
    - [ ] Add the new shortlinks to the MFEM packages in `spack`, `homebrew/science`, `VisIt`, etc.
 - [ ] Update website in `mfem/web` repo:
    - Update version and shortlinks in `src/index.md` and `src/download.md`.
    -  Use [cloc-1.62.pl](http://cloc.sourceforge.net/) and `ls -lh` to estimate the SLOC and the tarball size in `src/download.md`.

-## LLNL Workflow

-### Mirroring on Bitbucket
+## LLNL Workflow

 - The GitHub `master` and `next` branches are mirrored to the LLNL institutional
  Bitbucket repository as `gh-master` and `gh-next`.
@@ -552,17 +490,6 @@ MFEM uses a `master`/`next`-branch workflow as described below:
  - `mfem:gh-next` -- Bleeding-edge development version, may be broken, use at
     your own risk.

-### Mirroring on GitLab
-
- MFEM repository is also mirrored on the LLNL GitLab instance, in a
-  semi-automated manner.
-
- This instance is meant to complete CI testing with tests on Livermore
-  Computing systems. Gitlab pipeline status is reported in the corresponding
-  GitHub pull request.
-
- No change can be made on this instance.
-
 ## Automated Testing

 MFEM has several levels of automated testing running on GitHub, as well as on
@@ -589,15 +516,11 @@ CMake is used to generate the MSVC Project files and drive the build.  A release
 and debug build is performed with a simple run of `ex1` to verify the executable.

 ### Tests at LLNL
+At LLNL, we mirror the `master` and `next` branches internally (to `gh-master`
+and `gh-next`) and run longer nightly tests via cron. On the weekends, a more
+extensive test is run which extracts and executes all the different sample runs
+from each example.

- We mirror the `master` and `next` branches internally (to `gh-master` and
-  `gh-next`) and run longer nightly tests via cron. On the weekends, a more
-  extensive test is run which extracts and executes all the different sample
-  runs from each example.
-
- We also mirror PRs on the LLNL GitLab instance. PR mirroring can only be
-  triggered by _LLNL developers_, but test status is publicly available. Only
-  _LLNL developers_ can access the detailed test report.

 ## Contact Information

@@ -0,0 +1,64 @@
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+#
+# This file is part of the MFEM library. For more information and source code
+# availability see http://mfem.org.
+#
+# MFEM is free software; you can redistribute it and/or modify it under the
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.
+
+COPYRIGHT
+
+The following copyright applies to each file in the MFEM distribution, unless
+otherwise stated in the file:
+
+Copyright (c) 2010, Lawrence Livermore National Security, LLC.  Produced at the
+Lawrence Livermore National Laboratory under Contract No. DE-AC52-07NA27344 with
+the DOE.
+
+Neither the United States Government nor Lawrence Livermore National Security,
+LLC nor any of their employees, makes any warranty, express or implied, or
+assumes any liability or responsibility for the accuracy, completeness, or
+usefulness of any information, apparatus, product, or process disclosed, or
+represents that its use would not infringe privately-owned rights.
+
+Also, reference herein to any specific commercial products, process, or services
+by trade name, trademark, manufacturer or otherwise does not necessarily
+constitute or imply its endorsement, recommendation, or favoring by the United
+States Government or Lawrence Livermore National Security, LLC. The views and
+opinions of authors expressed herein do not necessarily state or reflect those
+of the United States Government or Lawrence Livermore National Security, LLC,
+and shall not be used for advertising or product endorsement purposes.
+
+
+LICENSE
+
+MFEM is free software; you can redistribute it and/or modify it under the terms
+of the GNU Lesser General Public License (as published by the Free Software
+Foundation) version 2.1 dated February 1999, with the following EXCEPTIONS:
+
+   1. Subclasses of MFEM classes do not constitute a derivative work.
+
+   2. Static linking of applications to the MFEM library does not constitute a
+      derivative work and does not require the author to provide source code for
+      the application, use the shared MFEM library, or link their applications
+      against a user-supplied version of MFEM.
+
+MFEM is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the IMPLIED WARRANTY OF MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE.  See the terms and conditions of the GNU Lesser General
+Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public License along
+with this library (file LICENSE); if not, write to the Free Software Foundation,
+Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+CONTACT INFORMATION
+
+The software is released under LLNL-CODE-443211. Please see
+
+                   http://mfem.org
+
+for more information and source code availability.
@@ -5,7 +5,7 @@
                      | | | | | ||  _||  __/| | | | | |
                      |_| |_| |_||_|   \___||_| |_| |_|

-                               https://mfem.org
+                               http://mfem.org

 The MFEM library has a serial and an MPI-based parallel version, which largely
 share the same code base. The only prerequisite for building the serial version
@@ -19,10 +19,10 @@ requires an MPI C++ compiler, as well as the following external libraries:
  http://glaros.dtc.umn.edu/gkhome/metis/metis/overview

 The hypre dependency can be downloaded as a tarball from GitHub or from the
-project webpage https://www.llnl.gov/casc/hypre. For example, the 2.20.0 release
+project webpage https://www.llnl.gov/casc/hypre. For example, the 2.16.0 release
 of hypre is available at

-   https://github.com/hypre-space/hypre/archive/v2.20.0.tar.gz
+   https://github.com/hypre-space/hypre/archive/v2.16.0.tar.gz

 The METIS dependency can be disabled but that is not generally recommended, see
 the option MFEM_USE_METIS.
@@ -30,8 +30,7 @@ the option MFEM_USE_METIS.
 MFEM also includes support for devices such as GPUs, and programming models such
 as CUDA, HIP, OCCA, OpenMP and RAJA.

- Starting with version 4.0, MFEM requires a C++11 compiler. We recommend using
-  a newer compiler, e.g. GCC version 4.9 or higher.
+- Starting with version 4.0, MFEM requires a C++11 compiler

 - CUDA support requires an NVIDIA GPU and an installation of the CUDA Toolkit
  https://developer.nvidia.com/cuda-toolkit
@@ -62,7 +61,7 @@ following package managers:

 We also recommend downloading and building the MFEM-based GLVis visualization
 tool which can be used to visualize the meshes and solution in MFEM's examples
-and miniapps. See https://glvis.org and https://mfem.org/building.
+and miniapps. See http://glvis.org and http://mfem.org/building.

 Quick start with GNU make
 =========================
@@ -344,33 +343,12 @@ MFEM_USE_SUPERLU = YES/NO
   SuperLURowLocMatrix a distributed CSR matrix class needed by SuperLU. When
   enabled, this option uses the SUPERLU_* library options, see below.

-MFEM_USE_SUPERLU5 = YES/NO
-   If SuperLU functionality is enabled, use the older 5.1.0 version rather than
-   the more recent 6+ versions.
-
-MFEM_USE_MUMPS = YES/NO
-   Enable MFEM functionality based on the MUMPS library. Currently, this
-   option adds the class MUMPSSolver (a parallel sparse direct solver). 
-   When enabled, this option uses the MUMPS_* library options, see
-   below.
-   
 MFEM_USE_STRUMPACK = YES/NO
   Enable MFEM functionality based on the STRUMPACK sparse direct solver and
   preconditioner through the STRUMPACKSolver and STRUMPACKRowLocMatrix
   classes. When enabled, this option uses the STRUMPACK_* library options, see
   below.

-MFEM_USE_GINKGO = YES/NO
-   Enable MFEM functionality based on the Ginkgo library, which provides
-   iterative linear solvers and preconditioners with OpenMP, CUDA backends, see
-   https://github.com/ginkgo-project/ginkgo. When enabled, the user can use
-   Ginkgo's solvers and preconditioners as shown in examples/ginkgo/.
-
-MFEM_USE_AMGX = YES/NO
-   Enable MFEM functionality based on the AmgX multigrid library from NVIDIA.
-   Allows the user to use SparseMatrices and HypreParMatrices to solve linear
-   systems with the routines from the AmgX library.
-
 MFEM_USE_GNUTLS = YES/NO
   Enable secure socket support in class socketstream, using the auxiliary
   GnuTLS_* classes, based on the GnuTLS library. This option may be useful in
@@ -398,10 +376,6 @@ MFEM_USE_PETSC = YES/NO
   and other features based on the PETSc package. When enabled, this option uses
   the PETSC_* library options, see below.

-MFEM_USE_SLEPC = YES/NO
-   Enable MFEM eigensolvers based on the SLEPc package. When enabled, this
-   option uses the SLEPC_* library options, see below.
-
 MFEM_USE_MPFR = YES/NO
   MPFR is a library for multiple-precision floating-point computations. This
   option enables the use of MPFR in MFEM, e.g. for precise computation of 1D
@@ -415,12 +389,6 @@ MFEM_USE_SIDRE = YES/NO
   blueprint specification. When enabled, this option requires installation of
   HDF5 (see also MFEM_USE_NETCDF), Conduit and LLNL's axom project.

-MFEM_USE_SIMD = YES/NO
-   Enables the high performance templated classes to use architecture dependent
-   SIMD intrinsics instead of the generic implementation of class AutoSIMD in
-   linalg/simd/auto.hpp. This option should be combined with suitable
-   compiler options, such as -march=native, to enable optimal vectorization.
-
 MFEM_USE_CONDUIT = YES/NO
   Enables support for converting MFEM Mesh and Grid Function objects to and
   from Conduit Mesh Blueprint Descriptions (https://github.com/LLNL/conduit/)
@@ -428,15 +396,10 @@ MFEM_USE_CONDUIT = YES/NO
   an installation of Conduit. If Conduit was built with HDF5 support, it also
   requires an installation of HDF5 (see also MFEM_USE_NETCDF).

-MFEM_USE_ADIOS2 = YES/NO
-   Enables support for ADIOS2, version 2 of the adaptable input output system
-   for scientific data management. In MFEM, ADIOS2 provides parallel I/O with
-   ParaView visualization.
-
-MFEM_USE_ZLIB = YES/NO
+MFEM_USE_GZSTREAM = YES/NO
   Enables use of on-the-fly gzip compressed streams. With this feature enabled
   (YES), MFEM can compress its output files on-the-fly. In addition, it can
-   read back files compressed with zlib (or any compression utility capable
+   read back files compressed with gzstream (or any compression utility capable
   of creating a gzip-compatible output such as gzip).
   MFEM will write compressed files if the mode argument in the constructor
   includes a 'z' character. With this feature disabled (NO), MFEM will not be
@@ -451,17 +414,6 @@ MFEM_USE_PUMI = YES/NO
   data management system that is capable of handling general non-manifold
   models and effectively supports automated adaptive analysis. PUMI enables
   support for parallel unstructured mesh modifications in MFEM.
-   The develop branch of PUMI repository (https://github.com/SCOREC/core)
-   should be used for most updated features.
-
-MFEM_USE_UMPIRE = YES/NO
-   Enables support for Umpire, a resource management library that allows the
-   discovery, provision, and management of memory on machines with multiple
-   memory devices like NUMA and GPUs.
-
-MFEM_USE_HIOP = YES/NO
-  Enable the usage of HiOp (https://github.com/LLNL/hiop) in MFEM. HiOp is an
-  HPC solver for nonlinear optimization problems.

 MFEM_USE_CUDA = YES/NO
   Enables support for CUDA devices in MFEM. CUDA is a parallel computing
@@ -490,24 +442,6 @@ MFEM_USE_OCCA = YES/NO
   backends. In order to use the OCCA CUDA backend, CUDA support must be enabled
   in MFEM as well, i.e. MFEM_USE_CUDA=YES must be set.

-MFEM_USE_GSLIB = YES/NO
-   Enables MFEM functionality based on the GSLIB library, and specifically its
-   FindPoints component, which provides a robust algorithms to evaluate finite
-   element functions in a collection of points in physical space. When enabled,
-   the user can use the GSLIB-FindPoints methods as shown in miniapps/gslib.
-
-MFEM_USE_CEED = YES/NO
-   Enables support for the libCEED library in MFEM. libCEED is a portable
-   library for performant high-order operator evaluation developed by the Center
-   for Efficient Exascale Discretizations in the Exascale Computing Project.
-
-MFEM_USE_MKL_CPARDISO = YES/NO
-   Enables the interface to MKL CPardiso: the Intel MKL Parallel Direct Sparse
-   Solver for Clusters. Make sure to set the correct values for MKL_MPI_WRAPPER
-   and MKL_LIBRARY_SUBDIR as shown in defaults.mk. If you configure MFEM with
-   MFEM_USE_LAPACK=YES, verify that the MKL LAPACK libraries are used. The
-   OpenMP capabilities are disabled at link time.
-
 MFEM_BUILD_TAG = (any value)
   An optional tag to characterize the build. Exported to config/config.mk.
   Can be used to identify the MFEM build from other makefiles.
@@ -531,13 +465,11 @@ The specific libraries and their options are:
 - HYPRE, required for the parallel build, i.e. when MFEM_USE_MPI = YES.
  URL: https://github.com/hypre-space/hypre and https://www.llnl.gov/casc/hypre
  Options: HYPRE_OPT, HYPRE_LIB.
-  Versions: HYPRE >= 2.10.0b.

 - METIS, used when MFEM_USE_METIS = YES. If using METIS 5, set
  MFEM_USE_METIS_5 = YES (default is to use METIS 4).
  URL: http://glaros.dtc.umn.edu/gkhome/metis/metis/overview
  Options: METIS_OPT, METIS_LIB.
-  Versions: METIS 4.0.3 or 5.1.0.

 - LAPACK (optional), used when MFEM_USE_LAPACK = YES. Alternative, optimized
  implementations can also be used, e.g. the ATLAS project.
@@ -557,38 +489,25 @@ The specific libraries and their options are:
  Beginning with MFEM v3.3, SUNDIALS v2.7.0 is supported.
  Beginning with MFEM v3.3.2, SUNDIALS v3.0.0 is also supported.
  Beginning with MFEM v4.1, only SUNDIALS v5.0.0+ is supported.
-  When MFEM_USE_CUDA is enabled, only SUNDIALS v5.4.0+ is supported.
  If MFEM_USE_MPI is enabled, we expect that SUNDIALS is built with support for
  both MPI and hypre.
-  If MFEM_USE_CUDA is enabled, we expect that SUNDIALS is built with support
-  for CUDA.
  URL: http://computation.llnl.gov/projects/sundials/sundials-software
  Options: SUNDIALS_OPT, SUNDIALS_LIB.
-  Versions: SUNDIALS >= 5.0.0, SUNDIALS >= 5.4.0 for CUDA support.

 - Mesquite (optional), used when MFEM_USE_MESQUITE = YES.
  URL: http://trilinos.org/oldsite/packages/mesquite
  Options: MESQUITE_OPT, MESQUITE_LIB.
-  The Mesquite support is deprecated and will be removed in the future.

 - SuiteSparse (optional), used when MFEM_USE_SUITESPARSE = YES.
  URL: http://faculty.cse.tamu.edu/davis/suitesparse.html
  Options: SUITESPARSE_OPT, SUITESPARSE_LIB.
-  Versions: SuiteSparse >= 4.5.4, older versions may work too.

 - SuperLU_DIST (optional), used when MFEM_USE_SUPERLU = YES. Note that
  SuperLU_DIST requires ParMETIS, which includes METIS 5 in its distribution.
  Both ParMETIS and the included METIS 5 should be built and installed in the
-  same location. If using SuperLU_Dist v5, set MFEM_USE_SUPERLU5=YES.
+  same location.
  URL: http://crd-legacy.lbl.gov/~xiaoye/SuperLU
  Options: SUPERLU_OPT, SUPERLU_LIB.
-  Versions: SuperLU_DIST >= 5.1.0.
-
- MUMPS (optional), used when MFEM_USE_MUMPS = YES. Note that MUMPS
-  requires LAPACK, SCALAPACK and a reordering package such as PORD or METIS.
-  URL: http://mumps.enseeiht.fr
-  Options: MUMPS_OPT, MUMPS_LIB.
-  Versions: MUMPS >= 5.1.1

 - STRUMPACK (optional), used when MFEM_USE_STRUMPACK = YES. Note that STRUMPACK
  requires the PT-Scotch and Scalapack libraries as well as ParMETIS, which
@@ -598,25 +517,12 @@ The specific libraries and their options are:
  2.0.0 or later.
  URL: http://portal.nersc.gov/project/sparse/strumpack
  Options: STRUMPACK_OPT, STRUMPACK_LIB.
-  Versions: STRUMPACK >= 3.0.0.
-
- Ginkgo (optional), used when MFEM_USE_GINKGO = YES. Note that Ginkgo needs a
-  C++ compiler that supports the C++-11 standard. For additional requirements
-  and dependencies of specific modules see the Ginkgo webpage below.
-  URL: https://ginkgo-project.github.io
-  Options: GINKGO_OPT (Not used), GINKGO_LIB.
-
- AmgX (optional), used when MFEM_USE_AMGX = YES.
-  URL: https://github.com/NVIDIA/AMGX
-  Options: AMGX_OPT, AMGX_LIB.
-  Versions: AmgX >= 2.1, older versions may work too.

 - GnuTLS (optional), used when MFEM_USE_GNUTLS = YES. On most Linux systems,
  GnuTLS is available as a development package, e.g. gnutls-devel. On Mac OS X,
  one can get the library through the Homebrew package manager (http://brew.sh).
  URL: http://gnutls.org
  Options: GNUTLS_OPT, GNUTLS_LIB.
-  Versions: GnuTLS >= 2.12.0, older versions may work too.

 - NetCDF (optional), used when MFEM_USE_NETCDF = YES, required for reading Cubit
  mesh files. Also requires installation of HDF5 and ZLIB, as explained at the
@@ -624,7 +530,6 @@ The specific libraries and their options are:
  don't need the C++ or parallel versions.
  URL: www.unidata.ucar.edu/software/netcdf
  Options: NETCDF_OPT, NETCDF_LIB.
-  Versions: NetCDF >= 4.4.0.

 - PETSc (optional), used when MFEM_USE_PETSC = YES. Version 3.8 or higher of
  the PETSC dev branch is required. The MFEM and PETSc builds can share common
@@ -636,13 +541,6 @@ The specific libraries and their options are:
                --with-shared-libraries=0
  URL: https://www.mcs.anl.gov/petsc
  Options: PETSC_OPT, PETSC_LIB.
-  Versions: PETSc >= 3.8.0.
-
- SLEPc (optional), used when MFEM_USE_SLEPC = YES. SLEPc depends on PETSc and
-  uses some of the PETSc options when compiled.
-  URL: https://slepc.upv.es/
-  Options: SLEPC_OPT, SLEPC_LIB.
-  Versions: SLEPc >= 3.8.0.

 - Sidre (optional), part of LLNL's axom project, used when MFEM_USE_SIDRE = YES.
  Starting with MFEM v4.1, Axom version 0.3.1 or later is required.
@@ -650,75 +548,33 @@ The specific libraries and their options are:
       https://github.com/LLNL/conduit (Conduit)
       https://support.hdfgroup.org/HDF5 (HDF5)
  Options: SIDRE_OPT, SIDRE_LIB.
-  Versions: Axom >= 0.3.1.

- Conduit (optional), used when MFEM_USE_CONDUIT = YES. Conduit Mesh Blueprint
+- Conduit, used when MFEM_USE_CONDUIT = YES. Direct Conduit Mesh Blueprint
  support requires Conduit >= v0.3.1 and VisIt >= v2.13.1 to read the output.
  URL: https://github.com/LLNL/conduit (Conduit)
       https://support.hdfgroup.org/HDF5 (HDF5)
  Options: CONDUIT_OPT, CONDUIT_LIB.
-  Versions: Conduit >= 0.3.1.

- ADIOS2 (optional) used when MFEM_USE_ADIOS2 = YES.
-  URL: https://adios2.readthedocs.io/
-  Versions: ADIOS >= 2.5.0.
-
- PUMI (optional), used when MFEM_USE_PUMI = YES.
+- PUMI, used when MFEM_USE_PUMI = YES.
  URL: https://scorec.rpi.edu/pumi
-       https://github.com/SCOREC/core
  Options: PUMI_OPT, PUMI_LIB.
-  Versions: PUMI == 2.2.3.

- HiOp (optional), used when MFEM_USE_HIOP = YES.
-  URL: https://github.com/LLNL/hiop
-  Options: HIOP_OPT, HIOP_LIB.
-  Versions: HIOP >= 0.1.
-
- GSLIB (optional), used when MFEM_USE_GSLIB = YES. The gslib library must be
-  built prior to the MFEM build, as follows: download gslib-1.0.5, untar it at
-  the same level as MFEM and create a symbolic link: "ln -s gslib-1.0.5 gslib".
-  Build gslib in parallel or in serial based on the desired MFEM build: "make
-  clean; make CC=mpicc" or "make clean; make CC=gcc MPI=0". Build MFEM with
-  MFEM_USE_GSLIB=YES.
-  URL: https://github.com/gslib/gslib/archive/v1.0.5.tar.gz
-  Options: GSLIB_OPT, GSLIB_LIB.
-  Versions: GSLIB >= 1.0.5.
-
- MKL CPardiso (optional), used when MFEM_USE_MKL_CPARDISO = YES.
-  URL: https://software.intel.com/content/www/us/en/develop/tools/math-kernel-library.html
-  Options: MKL_CPARDISO_OPT, MKL_CPARDISO_LIB.
-  Versions: Intel MKL >= 2020.
-
- CUDA (optional), used when MFEM_USE_CUDA = YES.
+- CUDA, used when MFEM_USE_CUDA = YES.
  URL: https://developer.nvidia.com/cuda-toolkit
  Options: CUDA_CXX, CUDA_ARCH, CUDA_OPT, CUDA_LIB.
-  Versions: CUDA >= 9.1, older versions may work too.

- HIP (optional), used when MFEM_USE_HIP = YES.
+- HIP, used when MFEM_USE_HIP = YES.
  URL: https://rocm.github.io/ROCmInstall.html
  Options: HIP_CXX, HIP_ARCH, HIP_OPT, HIP_LIB.

- OCCA (optional), used when MFEM_USE_OCCA = YES.
+- OCCA, used when MFEM_USE_OCCA = YES.
  URL: https://libocca.org
  Options: OCCA_DIR, OCCA_OPT, OCCA_LIB.
-  Versions: OCCA >= 1.1.0.

- libCEED (optional), used when MFEM_USE_CEED = YES.
-  URL: https://github.com/CEED/libCEED
-       https://ceed.exascaleproject.org/libceed
-  Options: CEED_DIR, CEED_OPT, CEED_LIB.
-  Versions: libCEED >= 0.7.
-
- RAJA (optional), used when MFEM_USE_RAJA = YES.
-  Beginning with MFEM v4.3, only RAJA v0.13.0+ is supported.
+- RAJA, used when MFEM_USE_RAJA = YES.
+  Beginning with MFEM v4.1, only RAJA v0.10.0+ is supported.
  URL: https://github.com/LLNL/RAJA
  Options: RAJA_DIR, RAJA_OPT, RAJA_LIB.
-  Versions: RAJA >= 0.13.0.
-
- Umpire, used when MFEM_USE_UMPIRE = YES.
-  URL: https://github.com/LLNL/Umpire
-  Options: UMPIRE_DIR, UMPIRE_OPT, UMPIRE_LIB.
-  Versions: Umpire >= 2.0.0.

 - MPFR (optional), used when MFEM_USE_MPFR = YES.
  URL: http://mpfr.org, it depends on the GMP library: https://gmplib.org
@@ -730,11 +586,12 @@ The specific libraries and their options are:
  URL: http://www.nongnu.org/libunwind
  Options: LIBUNWIND_OPT, LIBUNWIND_LIB.

- ZLIB (optional), used when MFEM_USE_ZLIB = YES, or when MFEM_USE_NETCDF =
+- ZLIB (optional), used when MFEM_USE_GZSTREAM = YES, or when MFEM_USE_NETCDF =
  YES (in the default settings for NETCDF_OPT and NETCDF_LIB).
  URL: https://zlib.net
  Options: ZLIB_OPT, ZLIB_LIB.

+
 Building with CMake
 ===================
 The MFEM build system consists of two steps: configuration and compilation.
@@ -849,21 +706,15 @@ MFEM_TIMER_TYPE - Set automatically, can be overwritten.
 MFEM_USE_MESQUITE
 MFEM_USE_SUITESPARSE
 MFEM_USE_SUPERLU
-MFEM_USE_MUMPS
 MFEM_USE_STRUMPACK
-MFEM_USE_GINKGO
-MFEM_USE_AMGX
 MFEM_USE_GNUTLS
 MFEM_USE_NETCDF
 MFEM_USE_MPFR
-MFEM_USE_ZLIB
+MFEM_USE_GZSTREAM
 MFEM_USE_PUMI
-MFEM_USE_HIOP
 MFEM_USE_CUDA
 MFEM_USE_OCCA
-MFEM_USE_CEED
 MFEM_USE_RAJA
-MFEM_USE_UMPIRE
 MFEM_USE_SIDRE

 The following options are CMake specific:
@@ -901,22 +752,18 @@ The CMake build system adds auto-detection for the following packages/libraries:

 - HYPRE
 - METIS - The option MFEM_USE_METIS_5 is auto-detected.
- - ParMETIS
 - MESQUITE
 - SuiteSparse
 - SuperLUDist, STRUMPACK
- - Ginkgo
- - AMGX
+ - ParMETIS
 - GNUTLS - Extends the built-in CMake support, to search GNUTLS_DIR as well.
 - NETCDF
 - MPFR
 - LIBUNWIND
 - POSIXCLOCKS
 - PUMI
- - HIOP
 - OCCA
 - RAJA
- - UMPIRE
 - AXOM - Used when MFEM_USE_SIDRE is enabled

 The following built-in CMake packages are also used:
@@ -1,29 +1,504 @@
-BSD 3-Clause License
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999

-Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC
-All rights reserved.
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.

-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]

-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
+                            Preamble

-* Redistributions in binary form must reproduce the above copyright notice,
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution.
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.

-* Neither the name of the copyright holder nor the names of its
-  contributors may be used to endorse or promote products derived from
-  this software without specific prior written permission.
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.

-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random
+  Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
@@ -1,32 +0,0 @@
-This work was produced under the auspices of the U.S. Department of Energy by
-Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
-
-This work was prepared as an account of work sponsored by an agency of
-the United States Government. Neither the United States Government nor
-Lawrence Livermore National Security, LLC, nor any of their employees
-makes any warranty, expressed or implied, or assumes any legal liability
-or responsibility for the accuracy, completeness, or usefulness of any
-information, apparatus, product, or process disclosed, or represents that
-its use would not infringe privately owned rights.
-
-Reference herein to any specific commercial product, process, or service
-by trade name, trademark, manufacturer, or otherwise does not necessarily
-constitute or imply its endorsement, recommendation, or favoring by the
-United States Government or Lawrence Livermore National Security, LLC.
-
-The views and opinions of authors expressed herein do not necessarily
-state or reflect those of the United States Government or Lawrence
-Livermore National Security, LLC, and shall not be used for advertising
-or product endorsement purposes.
-
-Inclusion of external software:
-
-This project distributes the sources of several external software products with
-their own respective licenses which can be found in their code and attached
-license files. These software products and their licenses are as follows:
-
-* AmgXWrapper (linalg/amgxsolver.{hpp,cpp}) -- MIT license
-* Catch++ (tests/unit/catch.hpp) -- Boost 1.0 license
-* Gecko (general/gecko.{cpp,hpp}) -- BSD 3-clause license
-* Picojson (fem/picojson.h) -- Custom 2-clause license
-* Zstr (general/zstr.hpp) -- MIT license
@@ -5,7 +5,7 @@
                      | | | | | ||  _||  __/| | | | | |
                      |_| |_| |_||_|   \___||_| |_| |_|

-                               https://mfem.org
+                               http://mfem.org

 MFEM is a modular parallel C++ library for finite element methods. Its goal is
 to enable high-performance scalable finite element discretization research and
@@ -14,10 +14,10 @@ supercomputers.

 * For building instructions, see the file INSTALL, or type "make help".

-* Copyright and licensing information can be found in files LICENSE and NOTICE.
+* Copyright and licensing information can be found in the file COPYRIGHT.

-* The best starting point for new users interested in MFEM's features is to
-  review the examples and miniapps at https://mfem.org/examples.
+* The best starting point for new users interested in MFEM's features is the
+  interactive documentation in examples/README.html.

 * Developers interested in contributing to the library, should read the
  instructions and documentation in the CONTRIBUTING.md file.
@@ -49,21 +49,20 @@ library. Nonlinear solvers (the Newton method), eigensolvers (LOBPCG), and
 several explicit and implicit Runge-Kutta time integrators are also available.

 MFEM supports MPI-based parallelism throughout the library, and can readily be
-used as a scalable unstructured finite element problem generator. Starting with
-version 4.0, MFEM offers support for GPU acceleration, and programming models,
-such as CUDA, HIP, OCCA, RAJA and OpenMP. MFEM-based applications require
-minimal changes to switch from a serial to a highly-performant MPI-parallel
-version of the code, where they can take advantage of the integrated linear
-solvers from the hypre library. Comprehensive support for other external
-packages, e.g. PETSc, SUNDIALS and libCEED is also included, giving access to
-additional linear and nonlinear solvers, preconditioners, time integrators, etc.
+used as a scalable unstructured finite element problem generator. As of version
+4.0, MFEM offers initial support for GPU acceleration, and programming models,
+such as CUDA, OCCA, RAJA and OpenMP. MFEM-based applications require minimal
+changes to switch from a serial to a high-performing MPI-parallel version of the
+code, where they can take advantage of the integrated linear solvers from the
+hypre library.  Comprehensive support for other external packages, e.g. PETSc
+and SUNDIALS is also included, giving access to many additional linear and
+nonlinear solvers, preconditioners, time integrators, etc.

 For examples of using MFEM, see the examples/ and miniapps/ directories, as well
-as the OpenGL visualization tool GLVis which is available at https://glvis.org.
+as the OpenGL visualization tool GLVis which is available at http://glvis.org.

-MFEM is distributed under the terms of the BSD-3 license. All new contributions
-must be made under this license. See LICENSE and NOTICE for details.
+This project is released under the LGPL v2.1 license with static linking
+exception. See files COPYRIGHT and LICENSE file for full details.

-SPDX-License-Identifier: BSD-3-Clause
-LLNL Release Number: LLNL-CODE-806117
+LLNL Release Number: LLNL-CODE-443211
 DOI: 10.11578/dc.20171025.1248
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 set(HDRS
 config.hpp
@@ -196,8 +196,8 @@ IF (DEFINED TPL_ENABLE_METIS)
  SET(MFEM_USE_METIS ${TPL_ENABLE_METIS} CACHE BOOL "Enable METIS usage" FORCE)
 ENDIF()

-IF (DEFINED TPL_ENABLE_ZLIB)
-  SET(MFEM_USE_ZLIB ${TPL_ENABLE_ZLIB} CACHE BOOL "Enable zlib for compressed data streams." FORCE)
+IF (DEFINED TPL_ENABLE_GZSTREAM)
+  SET(MFEM_USE_GZSTREAM ${TPL_ENABLE_GZSTREAM} CACHE BOOL "Enable gzstream for compressed data streams." FORCE)
 ENDIF()

 IF (DEFINED TPL_ENABLE_LIBUNWIND)
@@ -228,8 +228,8 @@ IF (DEFINED TPL_ENABLE_STRUMPACK)
  SET(MFEM_USE_STRUMPACK ${TPL_ENABLE_STRUMPACK} CACHE BOOL "Enable STRUMPACK usage" FORCE)
 ENDIF()

-IF (DEFINED TPL_ENABLE_GINKGO)
-  SET(MFEM_USE_GINKGO ${TPL_ENABLE_GINKGO} CACHE BOOL "Enable GINKGO usage" FORCE)
+IF (DEFINED TPL_ENABLE_GECKO)
+  SET(MFEM_USE_GECKO ${TPL_ENABLE_GECKO} CACHE BOOL "Enable GECKO usage" FORCE)
 ENDIF()

 IF (DEFINED TPL_ENABLE_GNUTLS)
@@ -244,10 +244,6 @@ IF (DEFINED TPL_ENABLE_PETSC)
  SET(MFEM_USE_PETSC ${TPL_ENABLE_PETSC} CACHE BOOL "Enable PETSc support." FORCE)
 ENDIF()

-IF (DEFINED TPL_ENABLE_SLEPC)
-  SET(MFEM_USE_SLEPC ${TPL_ENABLE_SLEPC} CACHE BOOL "Enable SLEPc support." FORCE)
-ENDIF()
-
 IF (DEFINED TPL_ENABLE_MPFR)
  SET(MFEM_USE_MPFR ${TPL_ENABLE_MPFR} CACHE BOOL "Enable MPFR usage." FORCE)
 ENDIF()
@@ -275,7 +271,3 @@ ENDIF()
 IF (DEFINED TPL_ENABLE_RAJA)
  SET(MFEM_USE_RAJA ${TPL_ENABLE_RAJA} CACHE BOOL "Enable RAJA" FORCE)
 ENDIF()
-
-IF (DEFINED TPL_ENABLE_UMPIRE)
-  SET(MFEM_USE_UMPIRE ${TPL_ENABLE_UMPIRE} CACHE BOOL "Enable Umpire" FORCE)
-ENDIF()
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+# the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+# reserved. See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 include(${CMAKE_CURRENT_LIST_DIR}/MFEMConfigVersion.cmake)

@@ -20,7 +20,7 @@ set(MFEM_USE_METIS @MFEM_USE_METIS@)
 set(MFEM_USE_METIS_5 @MFEM_USE_METIS_5@)
 set(MFEM_DEBUG @MFEM_DEBUG@)
 set(MFEM_USE_EXCEPTIONS @MFEM_USE_EXCEPTIONS@)
-set(MFEM_USE_ZLIB @MFEM_USE_ZLIB@)
+set(MFEM_USE_GZSTREAM @MFEM_USE_GZSTREAM@)
 set(MFEM_USE_LIBUNWIND @MFEM_USE_LIBUNWIND@)
 set(MFEM_USE_LAPACK @MFEM_USE_LAPACK@)
 set(MFEM_THREAD_SAFE @MFEM_THREAD_SAFE@)
@@ -32,16 +32,11 @@ set(MFEM_USE_SUNDIALS @MFEM_USE_SUNDIALS@)
 set(MFEM_USE_MESQUITE @MFEM_USE_MESQUITE@)
 set(MFEM_USE_SUITESPARSE @MFEM_USE_SUITESPARSE@)
 set(MFEM_USE_SUPERLU @MFEM_USE_SUPERLU@)
-set(MFEM_USE_MUMPS @MFEM_USE_MUMPS@)
 set(MFEM_USE_STRUMPACK @MFEM_USE_STRUMPACK@)
-set(MFEM_USE_GINKGO @MFEM_USE_GINKGO@)
-set(MFEM_USE_AMGX @MFEM_USE_AMGX@)
-set(MFEM_USE_HIOP @MFEM_USE_HIOP@)
+set(MFEM_USE_GECKO @MFEM_USE_GECKO@)
 set(MFEM_USE_GNUTLS @MFEM_USE_GNUTLS@)
-set(MFEM_USE_GSLIB @MFEM_USE_GSLIB@)
 set(MFEM_USE_NETCDF @MFEM_USE_NETCDF@)
 set(MFEM_USE_PETSC @MFEM_USE_PETSC@)
-set(MFEM_USE_SLEPC @MFEM_USE_SLEPC@)
 set(MFEM_USE_MPFR @MFEM_USE_MPFR@)
 set(MFEM_USE_SIDRE @MFEM_USE_SIDRE@)
 set(MFEM_USE_CONDUIT @MFEM_USE_CONDUIT@)
@@ -49,10 +44,6 @@ set(MFEM_USE_PUMI @MFEM_USE_PUMI@)
 set(MFEM_USE_CUDA @MFEM_USE_CUDA@)
 set(MFEM_USE_OCCA @MFEM_USE_OCCA@)
 set(MFEM_USE_RAJA @MFEM_USE_RAJA@)
-set(MFEM_USE_CEED @MFEM_USE_CEED@)
-set(MFEM_USE_UMPIRE @MFEM_USE_UMPIRE@)
-set(MFEM_USE_SIMD @MFEM_USE_SIMD@)
-set(MFEM_USE_ADIOS2 @MFEM_USE_ADIOS2@)

 set(MFEM_CXX_COMPILER "@CMAKE_CXX_COMPILER@")
 set(MFEM_CXX_FLAGS "@CMAKE_CXX_FLAGS@")
@@ -1,13 +1,13 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
+// Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+// the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+// reserved. See file COPYRIGHT for details.
 //
 // This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
+// availability see http://mfem.org.
 //
 // MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
+// terms of the GNU Lesser General Public License (as published by the Free
+// Software Foundation) version 2.1 dated February 1999.

 #ifndef MFEM_CONFIG_HEADER
 #define MFEM_CONFIG_HEADER
@@ -49,8 +49,8 @@
 // Throw an exception on errors.
 #cmakedefine MFEM_USE_EXCEPTIONS

-// Enable zlib in MFEM.
-#cmakedefine MFEM_USE_ZLIB
+// Enable gzstream in MFEM.
+#cmakedefine MFEM_USE_GZSTREAM

 // Enable backtraces for mfem_error through libunwind.
 #cmakedefine MFEM_USE_LIBUNWIND
@@ -74,9 +74,6 @@
 // [Deprecated] Enable experimental OpenMP support. Requires MFEM_THREAD_SAFE.
 #cmakedefine MFEM_USE_LEGACY_OPENMP

-// Internal MFEM option: enable group/batch allocation for some small objects.
-#cmakedefine MFEM_USE_MEMALLOC
-
 // Enable MFEM functionality based on the Mesquite library.
 #cmakedefine MFEM_USE_MESQUITE

@@ -86,48 +83,33 @@
 // Enable MFEM functionality based on the SuperLU_DIST library.
 #cmakedefine MFEM_USE_SUPERLU

-// Enable MFEM functionality based on the MUMPS library.
-#cmakedefine MFEM_USE_MUMPS
-
 // Enable MFEM functionality based on the STRUMPACK library.
 #cmakedefine MFEM_USE_STRUMPACK

-// Enable functionality based on the Ginkgo library
-#cmakedefine MFEM_USE_GINKGO
+// Internal MFEM option: enable group/batch allocation for some small objects.
+#cmakedefine MFEM_USE_MEMALLOC

-// Enable MFEM functionality based on the AmgX library
-#cmakedefine MFEM_USE_AMGX
+// Enable functionality based on the Gecko library
+#cmakedefine MFEM_USE_GECKO

 // Enable MFEM functionality based on the GnuTLS library
 #cmakedefine MFEM_USE_GNUTLS

-// Enable MFEM functionality based on the GSLIB library
-#cmakedefine MFEM_USE_GSLIB
-
 // Enable MFEM functionality based on the NetCDF library
 #cmakedefine MFEM_USE_NETCDF

 // Enable MFEM functionality based on the PETSc library
 #cmakedefine MFEM_USE_PETSC

-// Enable MFEM functionality based on the SLEPc library
-#cmakedefine MFEM_USE_SLEPC
-
 // Enable MFEM functionality based on the Sidre library
 #cmakedefine MFEM_USE_SIDRE

-// Enable the use of SIMD in the high performance templated classes
-#cmakedefine MFEM_USE_SIMD
-
 // Enable MFEM functionality based on Conduit
 #cmakedefine MFEM_USE_CONDUIT

 // Enable MFEM functionality based on the PUMI library
 #cmakedefine MFEM_USE_PUMI

-// Enable MFEM functionality based on the HiOp library
-#cmakedefine MFEM_USE_HIOP
-
 // Build the GPU/CUDA-enabled version of the MFEM library.
 // Requires a CUDA compiler (nvcc).
 #cmakedefine MFEM_USE_CUDA
@@ -138,15 +120,6 @@
 // Enable MFEM functionality based on the OCCA library
 #cmakedefine MFEM_USE_OCCA

-// Enable MFEM functionality based on the libCEED library
-#cmakedefine MFEM_USE_CEED
-
-// Enable MFEM functionality based on the Umpire library
-#cmakedefine MFEM_USE_UMPIRE
-
-// Enable MFEM functionality based on the ADIOS2 library
-#cmakedefine MFEM_USE_ADIOS2
-
 // Which library functions to use in class StopWatch for measuring time.
 // For a list of the available options, see INSTALL.
 // If not defined, an option is selected automatically.
@@ -162,7 +135,4 @@
 // library.
 #cmakedefine MFEM_USE_SIMMETRIX

-// Enable interface to the MKL CPardiso library.
-#cmakedefine MFEM_USE_MKL_CPARDISO
-
 #endif // MFEM_CONFIG_HEADER
@@ -1,64 +0,0 @@
-#------------------------------------------------------------------------------#
-# Distributed under the OSI-approved Apache License, Version 2.0.  See
-# accompanying file Copyright.txt for details.
-#------------------------------------------------------------------------------#
-#
-# FindADIOS2
-# -----------
-#
-# Try to find the ADIOS2 library
-#
-# This module defines the following variables:
-#
-#   ADIOS2_FOUND        - System has ADIOS2
-#   ADIOS2_INCLUDE_DIRS - The ADIOS2 include directory
-#   ADIOS2_LIBRARIES    - Link these to use ADIOS2
-#
-# and the following imported targets:
-#   ADIOS2::ADIOS2 - The ADIOS2 compression library target
-#
-# You can also set the following variable to help guide the search:
-#   ADIOS2_DIR - The install prefix for ADIOS2 containing the
-#              include and lib folders
-#              Note: this can be set as a CMake variable or an
-#                    environment variable.  If specified as a CMake
-#                    variable, it will override any setting specified
-#                    as an environment variable.
-
-if(NOT ADIOS2_FOUND)
-  if((NOT ADIOS2_DIR) AND (NOT (ENV{ADIOS2_DIR} STREQUAL "")))
-    set(ADIOS2_DIR "$ENV{ADIOS2_DIR}")
-  endif()
-  if(ADIOS2_DIR)
-    set(ADIOS2_INCLUDE_OPTS HINTS ${ADIOS2_DIR}/include NO_DEFAULT_PATHS)
-    set(ADIOS2_LIBRARY_OPTS
-      HINTS ${ADIOS2_DIR}/lib ${ADIOS2_DIR}/lib64
-      NO_DEFAULT_PATHS
-    )
-  endif()
-
-  find_path(ADIOS2_INCLUDE_DIR adios2.h ${ADIOS2_INCLUDE_OPTS})
-
-  # adios2 version 2.5.0
-  find_library(ADIOS2_LIBRARY NAMES adios2 ${ADIOS2_LIBRARY_OPTS})
-
-  # adios2 version 2.6.0 and onwards
-  if(NOT ADIOS2_LIBRARY)
-	find_library(ADIOS2_CXX11_MPI_LIBRARY NAMES adios2_cxx11_mpi ${ADIOS2_LIBRARY_OPTS})
-	find_library(ADIOS2_CXX11_LIBRARY NAMES adios2_cxx11 ${ADIOS2_LIBRARY_OPTS})
-	set(ADIOS2_LIBRARY ${ADIOS2_CXX11_MPI_LIBRARY} ${ADIOS2_CXX11_LIBRARY})
-	if(MFEM_USE_MPI)
-	  add_definitions(-DADIOS2_USE_MPI)
-	endif()
-  endif()
-
-  include(FindPackageHandleStandardArgs)
-  find_package_handle_standard_args(ADIOS2
-    FOUND_VAR ADIOS2_FOUND
-    REQUIRED_VARS ADIOS2_LIBRARY ADIOS2_INCLUDE_DIR
-  )
-  if(ADIOS2_FOUND)
-    set(ADIOS2_INCLUDE_DIRS ${ADIOS2_INCLUDE_DIR})
-    set(ADIOS2_LIBRARIES ${ADIOS2_LIBRARY})
-  endif()
-endif()
@@ -1,20 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - AMGX_FOUND
-#   - AMGX_LIBRARIES
-#   - AMGX_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-set(AMGX_REQUIRED_LIBRARIES cusparse cusolver cublas nvToolsExt)
-mfem_find_package(AMGX AMGX AMGX_DIR "include" "amgx_c.h" "lib" "amgx"
-  "Paths to headers required by AMGX." "Libraries required by AMGX.")
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - AXOM_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Check for "abi::__cxa_demangle" in <cxxabi.h>.
 # Defines the variables:
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - CONDUIT_FOUND
@@ -1,19 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - GSLIB_FOUND
-#   - GSLIB_LIBRARIES
-#   - GSLIB_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-mfem_find_package(gslib GSLIB GSLIB_DIR "include" gslib.h "lib" gs
-  "Paths to headers required by GSLIB." "Libraries required by GSLIB.")
@@ -0,0 +1,19 @@
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
+#
+# This file is part of the MFEM library. For more information and source code
+# availability see http://mfem.org.
+#
+# MFEM is free software; you can redistribute it and/or modify it under the
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.
+
+# Defines the following variables:
+#   - GECKO_FOUND
+#   - GECKO_LIBRARIES
+#   - GECKO_INCLUDE_DIRS
+
+include(MfemCmakeUtilities)
+mfem_find_package(Gecko GECKO GECKO_DIR "include;inc" graph.h "lib" gecko
+  "Paths to headers required by Gecko." "Libraries required by Gecko.")
@@ -1,36 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Sets the following variables:
-#   - HIOP_FOUND
-#   - HIOP_INCLUDE_DIRS
-#   - HIOP_LIBRARIES
-
-include(MfemCmakeUtilities)
-mfem_find_package(HIOP HIOP HIOP_DIR
-  "include" "hiopInterface.hpp"
-  "lib" "hiop"
-  "Paths to headers required by HIOP."
-  "Libraries required by HIOP.")
-
-# this test fails with parallel MFEM since mpi.h is not available (cxx compiler is used for some reason)
-#  CHECK_BUILD HIOP_VERSION_OK TRUE
-#"
-##include <hiopInterface.hpp>
-#using namespace hiop;
-#int main(int argc, char *argv[])
-#{
-#   MPI_Init(&argc, &argv);
-#   MPI_Comm comm = MPI_COMM_WORLD;
-#
-#   return 0;
-#}
-#")
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - HYPRE_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find libdl.
 # Defines:
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find libunwind.
 # Defines the following variables:
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - METIS_FOUND
@@ -25,16 +25,16 @@ mfem_find_package(METIS METIS METIS_DIR "include;Lib" "metis.h"

 int main()
 {
-    idx_t n = 10;
-    idx_t nparts = 5;
-    idx_t edgecut;
-    idx_t* partitioning = new idx_t[10];
-    idx_t* I = partitioning,
+    int n = 10;
+    int nparts = 5;
+    int edgecut;
+    int* partitioning = new int[10];
+    int* I = partitioning,
       * J = partitioning;

-    idx_t ncon = 1;
+    int ncon = 1;
    int err;
-    idx_t options[40];
+    int options[40];

    METIS_SetDefaultOptions(options);
    options[10] = 1; // set METIS_OPTION_CONTIG
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find the libraries needed for backtrace in MFEM. This is a "meta-package",
 # i.e. it simply combines all packages from MFEMBacktrace_REQUIRED_PACKAGES.
@@ -1,32 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - MKL_CPARDISO_FOUND
-#   - MKL_CPARDISO_LIBRARIES
-#   - MKL_CPARDISO_INCLUDE_DIRS
-
-if(NOT MKL_MPI_WRAPPER_LIB)
-  message(FATAL_ERROR "MKL CPardiso enabled but no MKL MPI Wrapper lib specified")
-endif()
-
-if(NOT MKL_LIBRARY_DIR)
-  message(WARNING "Using default MKL library path. Double check the variable MKL_LIBRARY_DIR")
-  set(MKL_LIBRARY_DIR "lib")
-endif()
-
-include(MfemCmakeUtilities)
-mfem_find_package(MKL_CPARDISO MKL_CPARDISO
-    MKL_CPARDISO_DIR "include" mkl_cluster_sparse_solver.h ${MKL_LIBRARY_DIR} mkl_core
-  "Paths to headers required by MKL CPardiso." "Libraries required by MKL CPARDISO."
-  ADD_COMPONENT MKL_LP64 "include" "" ${MKL_LIBRARY_DIR} mkl_intel_lp64
-  ADD_COMPONENT MKL_SEQUENTIAL "include" "" ${MKL_LIBRARY_DIR} mkl_sequential
-  ADD_COMPONENT MKL_MPI_WRAPPER "include" "" ${MKL_LIBRARY_DIR} ${MKL_MPI_WRAPPER_LIB})
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find MPFR.
 # Defines the following variables:
@@ -1,23 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Sets the following variables:
-#   - MUMPS_FOUND
-#   - MUMPS_INCLUDE_DIRS
-#   - MUMPS_LIBRARIES
-
-include(MfemCmakeUtilities)
-mfem_find_package(MUMPS MUMPS MUMPS_DIR
-  "include" dmumps_c.h "lib" dmumps
-  "Paths to headers required by MUMPS."
-  "Libraries required by MUMPS."
-  ADD_COMPONENT mumps_common "include" dmumps_c.h "lib" mumps_common
-  ADD_COMPONENT pord "include" dmumps_c.h "lib" pord)
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - MESQUITE_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - NETCDF_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - OCCA_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find POSIX clocks.
 # Defines:
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Sets the following variables
 #   - ParMETIS_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - RAJA_FOUND
@@ -1,44 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Sets the following variables:
-#   - SLEPC_FOUND
-#   - SLEPC_INCLUDE_DIRS
-#   - SLEPC_LIBRARIES
-
-set(SLEPc_REQUIRED_PACKAGES "PETSC" CACHE STRING
-  "Additional packages required by SLEPc")
-
-include(MfemCmakeUtilities)
-mfem_find_package(SLEPc SLEPC SLEPC_DIR
-  "include" "slepceps.h"
-  "${PETSC_ARCH}/lib" "slepc" # add NAMES_PER_DIR?
-  "Paths to headers required by SLEPc."
-  "Libraries required by SLEPc."
-  ADD_COMPONENT "config" "${PETSC_ARCH}/include" "slepcconf.h" "" ""
-  CHECK_BUILD SLEPC_VERSION_OK TRUE
-"
-#include \"petsc.h\"
-#include \"slepceps.h\"
-int main()
-{
-  PetscErrorCode ierr;
-  int argc = 0;
-  char** argv = NULL;
-  ierr = SlepcInitialize(&argc, &argv, PETSC_NULL, PETSC_NULL);
-  EPS eps;
-  ierr = EPSCreate(PETSC_COMM_SELF, &eps); CHKERRQ(ierr);
-  ierr = EPSDestroy(&eps); CHKERRQ(ierr);
-  ierr = SlepcFinalize(); CHKERRQ(ierr);
-  return 0;
-}
-"
-  )
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Sets the following variables:
 #   - STRUMPACK_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Defines the following variables:
 #   - SUNDIALS_FOUND
@@ -20,15 +20,10 @@ mfem_find_package(SUNDIALS SUNDIALS SUNDIALS_DIR
  "Paths to headers required by SUNDIALS." "Libraries required by SUNDIALS."
  ADD_COMPONENT NVector_Serial
    "include" nvector/nvector_serial.h "lib" sundials_nvecserial
-  ADD_COMPONENT NVector_Cuda
-    "include" nvector/nvector_cuda.h "lib" sundials_nveccuda
-  ADD_COMPONENT NVector_ParHyp
-    "include" nvector/nvector_parhyp.h "lib" sundials_nvecparhyp
  ADD_COMPONENT NVector_Parallel
    "include" nvector/nvector_parallel.h "lib" sundials_nvecparallel
-  ADD_COMPONENT NVector_MPIPlusX
-    "include" nvector/nvector_mpiplusx.h "lib" sundials_nvecmpiplusx
+  ADD_COMPONENT NVector_ParHyp
+    "include" nvector/nvector_parhyp.h "lib" sundials_nvecparhyp
  ADD_COMPONENT CVODE "include" cvode/cvode.h "lib" sundials_cvode
-  ADD_COMPONENT CVODES "include" cvodes/cvodes.h "lib" sundials_cvodes
  ADD_COMPONENT ARKODE "include" arkode/arkode.h "lib" sundials_arkode
  ADD_COMPONENT KINSOL "include" kinsol/kinsol.h "lib" sundials_kinsol)
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Sets the following variables:
 #   - Scotch_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Sets the following variables
 #   - SuiteSparse_FOUND
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Sets the following variables:
 #   - SuperLUDist_FOUND
@@ -1,19 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - UMPIRE_FOUND
-#   - UMPIRE_LIBRARIES
-#   - UMPIRE_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-mfem_find_package(UMPIRE UMPIRE UMPIRE_DIR "include" "umpire/Umpire.hpp" "lib" "umpire"
-  "Paths to headers required by UMPIRE." "Libraries required by UMPIRE.")
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Find GnuTLS, searching ${GNUTLS_DIR} first. If not successful, tries the
 # standard FindGnuTLS.cmake. Defines:
@@ -1,19 +0,0 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - CEED_FOUND
-#   - CEED_LIBRARIES
-#   - CEED_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-mfem_find_package(libCEED CEED CEED_DIR "include" ceed.h "lib" ceed
-  "Paths to headers required by libCEED." "Libraries required by libCEED.")
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Function that converts a version string of the form 'major[.minor[.patch]]' to
 # the integer ((major * 100) + minor) * 100 + patch.
@@ -70,11 +70,6 @@ function(add_mfem_examples EXE_SRCS)
    endif()
  endif()
  foreach(SRC_FILE IN LISTS ${EXE_SRCS})
-    # If CUDA is enabled, tag source files to be compiled with nvcc.
-    if (MFEM_USE_CUDA)
-      set_property(SOURCE ${SRC_FILE} PROPERTY LANGUAGE CUDA)
-    endif()
-
    get_filename_component(SRC_FILENAME ${SRC_FILE} NAME)

    string(REPLACE ".cpp" "" EXE_NAME "${EXE_PREFIX}${SRC_FILENAME}")
@@ -124,21 +119,6 @@ function(add_mfem_miniapp MFEM_EXE_NAME)
    endif()
  endforeach()

-  # If CUDA is enabled, tag source files to be compiled with nvcc.
-  if (MFEM_USE_CUDA)
-    set_property(SOURCE ${MAIN_LIST} ${EXTRA_SOURCES_LIST}
-      PROPERTY LANGUAGE CUDA)
-    if (CMAKE_VERSION VERSION_GREATER_EQUAL 3.12.0)
-      list(TRANSFORM EXTRA_OPTIONS_LIST PREPEND "-Xcompiler=")
-    else()
-      set(LIST_)
-      foreach(item IN LISTS EXTRA_OPTIONS_LIST)
-        list(APPEND LIST_ "-Xcompiler=${item}")
-      endforeach()
-      set(EXTRA_OPTIONS_LIST ${LIST_})
-    endif()
-  endif()
-
  # Actually add the executable
  add_executable(${MFEM_EXE_NAME} ${MAIN_LIST}
    ${EXTRA_SOURCES_LIST} ${EXTRA_HEADERS_LIST})
@@ -235,7 +215,7 @@ endfunction(mfem_find_component)
 #   code snippets. Additionally, a list of required/optional/alternative
 #   packages (given by ${Name}_REQUIRED_PACKAGES) are searched for and added to
 #   the ${Prefix}_INCLUDE_DIRS and ${Prefix}_LIBRARIES lists. The variable
-#   ${Name}_REQUIRED_LIBRARIES can be set to specify any additional libraries
+#   ${Name}_REQUIRED_LIBRARIES can be set to spcecify any additional libraries
 #   that are needed. This function defines the following CACHE variables:
 #
 #      ${Prefix}_FOUND
@@ -733,16 +713,14 @@ function(mfem_export_mk_files)
    set(shared_link_flag "-Wl,-rpath,")
  endif()

-  # Convert Boolean vars to YES/NO without writing the values to cache
+  # Convert Boolean vars to YES/NO without writting the values to cache
  set(CONFIG_MK_BOOL_VARS MFEM_USE_MPI MFEM_USE_METIS MFEM_USE_METIS_5
-      MFEM_DEBUG MFEM_USE_EXCEPTIONS MFEM_USE_ZLIB MFEM_USE_LIBUNWIND
+      MFEM_DEBUG MFEM_USE_EXCEPTIONS MFEM_USE_GZSTREAM MFEM_USE_LIBUNWIND
      MFEM_USE_LAPACK MFEM_THREAD_SAFE MFEM_USE_OPENMP MFEM_USE_LEGACY_OPENMP
      MFEM_USE_MEMALLOC MFEM_USE_SUNDIALS MFEM_USE_MESQUITE MFEM_USE_SUITESPARSE
-      MFEM_USE_SUPERLU MFEM_USE_STRUMPACK MFEM_USE_GINKGO MFEM_USE_AMGX
-      MFEM_USE_GNUTLS MFEM_USE_GSLIB MFEM_USE_NETCDF MFEM_USE_PETSC
-      MFEM_USE_SLEPC MFEM_USE_MPFR MFEM_USE_SIDRE MFEM_USE_CONDUIT MFEM_USE_PUMI
-      MFEM_USE_CUDA MFEM_USE_OCCA MFEM_USE_RAJA MFEM_USE_UMPIRE MFEM_USE_SIMD
-      MFEM_USE_ADIOS2)
+      MFEM_USE_SUPERLU MFEM_USE_STRUMPACK MFEM_USE_GECKO MFEM_USE_GNUTLS
+      MFEM_USE_NETCDF MFEM_USE_PETSC MFEM_USE_MPFR MFEM_USE_SIDRE
+      MFEM_USE_CONDUIT MFEM_USE_PUMI MFEM_USE_CUDA MFEM_USE_OCCA MFEM_USE_RAJA)
  foreach(var ${CONFIG_MK_BOOL_VARS})
    if (${var})
      set(${var} YES)
@@ -752,15 +730,8 @@ function(mfem_export_mk_files)
  endforeach()
  # TODO: Add support for MFEM_USE_CUDA=YES
  set(MFEM_CXX ${CMAKE_CXX_COMPILER})
-  set(MFEM_HOST_CXX ${MFEM_CXX})
  set(MFEM_CPPFLAGS "")
-  get_target_property(cxx_std mfem CXX_STANDARD)
-  # For now, we ignore the setting of the CXX_EXTENSIONS property. If this
-  # property is set, then we need to use a variable like:
-  #    CMAKE_CXX11_EXTENSION_COMPILE_OPTION
-  set(cxx_std_flag ${CMAKE_CXX${cxx_std}_STANDARD_COMPILE_OPTION})
-  string(STRIP
-         "${cxx_std_flag} ${CMAKE_CXX_FLAGS_${BUILD_TYPE}} ${CMAKE_CXX_FLAGS}"
+  string(STRIP "${CMAKE_CXX_FLAGS_${BUILD_TYPE}} ${CMAKE_CXX_FLAGS}"
         MFEM_CXXFLAGS)
  set(MFEM_TPLFLAGS "")
  foreach(dir ${MFEM_TPL_INCLUDE_DIRS})
@@ -826,7 +797,7 @@ function(mfem_export_mk_files)
      string(REGEX REPLACE "^SCOREC::" "" libname ${pumilib})
      string(FIND "${pumilib}" ".a" staticlib)
      string(FIND "${pumilib}" ".so" sharedlib)
-      find_library(lib ${libname} PATHS ${PUMI_DIR}/lib NO_DEFAULT_PATH)
+      find_library(lib ${libname} PATHS ${PUMI_DIR}/lib NO_DEFUALT_PATH)
      if (NOT "${sharedlib}" MATCHES "-1" OR
          NOT "${staticlib}" MATCHES "-1"   )
        set(MFEM_EXT_LIBS "${pumilib} ${MFEM_EXT_LIBS}")
@@ -843,7 +814,7 @@ function(mfem_export_mk_files)
  foreach(lib ${TPL_LIBRARIES})
    get_filename_component(suffix ${lib} EXT)
    # handle interfaces (e.g., SCOREC::apf)
-    if ("${lib}" MATCHES "SCOREC::.*" OR "${lib}" MATCHES "Ginkgo::.*")
+    if ("${lib}" MATCHES "SCOREC::.*")
    elseif (NOT "${lib}" MATCHES "SCOREC::.*" AND "${lib}" MATCHES ".*::.*")
      message(FATAL_ERROR "***** interface lib found ... exiting *****")
      # handle static and shared libs
@@ -1,13 +1,13 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
+// Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+// the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+// reserved. See file COPYRIGHT for details.
 //
 // This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
+// availability see http://mfem.org.
 //
 // MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
+// terms of the GNU Lesser General Public License (as published by the Free
+// Software Foundation) version 2.1 dated February 1999.


 // Support out-of-source builds: if MFEM_CONFIG_FILE is defined, include it.
@@ -34,12 +34,6 @@
 // Macro needed to get defines like M_PI from <cmath>. (Visual Studio C++ only?)
 #define _USE_MATH_DEFINES
 #endif
-// On Cygwin the option -std=c++11 prevents the definition of M_PI. Defining
-// the following macro allows us to get M_PI and some needed functions, e.g.
-// posix_memalign(), strdup(), strerror_r().
-#ifdef __CYGWIN__
-#define _XOPEN_SOURCE 600
-#endif

 // Check dependencies:

@@ -48,21 +42,12 @@
 #ifdef MFEM_USE_SUPERLU
 #error Building with SuperLU_DIST (MFEM_USE_SUPERLU=YES) requires MPI (MFEM_USE_MPI=YES)
 #endif
-#ifdef MFEM_USE_MUMPS
-#error Building with MUMPS (MFEM_USE_MUMPS=YES) requires MPI (MFEM_USE_MPI=YES)
-#endif
 #ifdef MFEM_USE_STRUMPACK
 #error Building with STRUMPACK (MFEM_USE_STRUMPACK=YES) requires MPI (MFEM_USE_MPI=YES)
 #endif
-#ifdef MFEM_USE_MKL_CPARDISO
-#error Building with MKL CPARDISO (MFEM_USE_MKL_CPARDISO=YES) requires MPI (MFEM_USE_MPI=YES)
-#endif
 #ifdef MFEM_USE_PETSC
 #error Building with PETSc (MFEM_USE_PETSC=YES) requires MPI (MFEM_USE_MPI=YES)
 #endif
-#ifdef MFEM_USE_SLEPC
-#error Building with SLEPc (MFEM_USE_SLEPC=YES) requires MPI (MFEM_USE_MPI=YES)
-#endif
 #ifdef MFEM_USE_PUMI
 #error Building with PUMI (MFEM_USE_PUMI=YES) requires MPI (MFEM_USE_MPI=YES)
 #endif
@@ -1,13 +1,13 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
+// Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+// the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+// reserved. See file COPYRIGHT for details.
 //
 // This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
+// availability see http://mfem.org.
 //
 // MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
+// terms of the GNU Lesser General Public License (as published by the Free
+// Software Foundation) version 2.1 dated February 1999.

 #ifndef MFEM_CONFIG_HEADER
 #define MFEM_CONFIG_HEADER
@@ -49,8 +49,8 @@
 // Throw an exception on errors.
 // #define MFEM_USE_EXCEPTIONS

-// Enable zlib in MFEM.
-// #define MFEM_USE_ZLIB
+// Enable gzstream in MFEM.
+// #define MFEM_USE_GZSTREAM

 // Enable backtraces for mfem_error through libunwind.
 // #define MFEM_USE_LIBUNWIND
@@ -93,20 +93,12 @@

 // Enable MFEM functionality based on the SuperLU library.
 // #define MFEM_USE_SUPERLU
-// #define MFEM_USE_SUPERLU5
-
-// Enable MFEM functionality based on the MUMPS library.
-// #define MFEM_USE_MUMPS
-// #define MFEM_MUMPS_VERSION @MFEM_MUMPS_VERSION@

 // Enable MFEM functionality based on the STRUMPACK library.
 // #define MFEM_USE_STRUMPACK

-// Enable MFEM features based on the Ginkgo library
-// #define MFEM_USE_GINKGO
-
-// Enable MFEM functionality based on the AmgX library.
-// #define MFEM_USE_AMGX
+// Enable functionality based on the Gecko library
+// #define MFEM_USE_GECKO

 // Enable secure socket streams based on the GNUTLS library
 // #define MFEM_USE_GNUTLS
@@ -114,9 +106,6 @@
 // Enable Sidre support
 // #define MFEM_USE_SIDRE

-// Enable the use of SIMD in the high performance templated classes
-// #define MFEM_USE_SIMD
-
 // Enable Conduit support
 // #define MFEM_USE_CONDUIT

@@ -126,21 +115,12 @@
 // Enable functionality based on the PETSc library
 // #define MFEM_USE_PETSC

-// Enable functionality based on the SLEPc library
-// #define MFEM_USE_SLEPC
-
 // Enable functionality based on the MPFR library.
 // #define MFEM_USE_MPFR

 // Enable MFEM functionality based on the PUMI library
 // #define MFEM_USE_PUMI

-// Enable MFEM functionality based on the HIOP library.
-// #define MFEM_USE_HIOP
-
-// Enable MFEM functionality based on the GSLIB library
-// #define MFEM_USE_GSLIB
-
 // Build the NVIDIA GPU/CUDA-enabled version of the MFEM library.
 // Requires a CUDA compiler (nvcc).
 // #define MFEM_USE_CUDA
@@ -155,15 +135,6 @@
 // Enable functionality based on the OCCA library.
 // #define MFEM_USE_OCCA

-// Enable functionality based on the libCEED library.
-// #define MFEM_USE_CEED
-
-// Enable functionality based on the Umpire library.
-// #define MFEM_USE_UMPIRE
-
-// Enable IO functionality based on the ADIOS2 library.
-// #define MFEM_USE_ADIOS2
-
 // Version of HYPRE used for building MFEM.
 // #define MFEM_HYPRE_VERSION @MFEM_HYPRE_VERSION@

@@ -171,7 +142,4 @@
 // library.
 // #define MFEM_USE_SIMMETRIX

-// Enable interface to the MKL CPardiso library.
-// #define MFEM_USE_MKL_CPARDISO
-
 #endif // MFEM_CONFIG_HEADER
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Variables corresponding to defines in config.hpp (YES, NO, or value)
 MFEM_VERSION           = @MFEM_VERSION@
@@ -20,7 +20,7 @@ MFEM_USE_METIS         = @MFEM_USE_METIS@
 MFEM_USE_METIS_5       = @MFEM_USE_METIS_5@
 MFEM_DEBUG             = @MFEM_DEBUG@
 MFEM_USE_EXCEPTIONS    = @MFEM_USE_EXCEPTIONS@
-MFEM_USE_ZLIB          = @MFEM_USE_ZLIB@
+MFEM_USE_GZSTREAM      = @MFEM_USE_GZSTREAM@
 MFEM_USE_LIBUNWIND     = @MFEM_USE_LIBUNWIND@
 MFEM_USE_LAPACK        = @MFEM_USE_LAPACK@
 MFEM_THREAD_SAFE       = @MFEM_THREAD_SAFE@
@@ -32,34 +32,22 @@ MFEM_USE_SUNDIALS      = @MFEM_USE_SUNDIALS@
 MFEM_USE_MESQUITE      = @MFEM_USE_MESQUITE@
 MFEM_USE_SUITESPARSE   = @MFEM_USE_SUITESPARSE@
 MFEM_USE_SUPERLU       = @MFEM_USE_SUPERLU@
-MFEM_USE_SUPERLU5      = @MFEM_USE_SUPERLU5@
-MFEM_USE_MUMPS         = @MFEM_USE_MUMPS@
 MFEM_USE_STRUMPACK     = @MFEM_USE_STRUMPACK@
-MFEM_USE_GINKGO        = @MFEM_USE_GINKGO@
-MFEM_USE_AMGX          = @MFEM_USE_AMGX@
+MFEM_USE_GECKO         = @MFEM_USE_GECKO@
 MFEM_USE_GNUTLS        = @MFEM_USE_GNUTLS@
 MFEM_USE_NETCDF        = @MFEM_USE_NETCDF@
 MFEM_USE_PETSC         = @MFEM_USE_PETSC@
-MFEM_USE_SLEPC         = @MFEM_USE_SLEPC@
 MFEM_USE_MPFR          = @MFEM_USE_MPFR@
 MFEM_USE_SIDRE         = @MFEM_USE_SIDRE@
 MFEM_USE_CONDUIT       = @MFEM_USE_CONDUIT@
 MFEM_USE_PUMI          = @MFEM_USE_PUMI@
-MFEM_USE_HIOP          = @MFEM_USE_HIOP@
-MFEM_USE_GSLIB         = @MFEM_USE_GSLIB@
 MFEM_USE_CUDA          = @MFEM_USE_CUDA@
 MFEM_USE_HIP           = @MFEM_USE_HIP@
 MFEM_USE_RAJA          = @MFEM_USE_RAJA@
 MFEM_USE_OCCA          = @MFEM_USE_OCCA@
-MFEM_USE_CEED          = @MFEM_USE_CEED@
-MFEM_USE_UMPIRE        = @MFEM_USE_UMPIRE@
-MFEM_USE_SIMD          = @MFEM_USE_SIMD@
-MFEM_USE_ADIOS2        = @MFEM_USE_ADIOS2@
-MFEM_USE_MKL_CPARDISO  = @MFEM_USE_MKL_CPARDISO@

 # Compiler, compile options, and link options
 MFEM_CXX       = @MFEM_CXX@
-MFEM_HOST_CXX  = @MFEM_HOST_CXX@
 MFEM_CPPFLAGS  = @MFEM_CPPFLAGS@
 MFEM_CXXFLAGS  = @MFEM_CXXFLAGS@
 MFEM_TPLFLAGS  = @MFEM_TPLFLAGS@
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # See the file INSTALL for description of the configuration options.

@@ -22,7 +22,7 @@ endif()
 option(MFEM_USE_MPI "Enable MPI parallel build" OFF)
 option(MFEM_USE_METIS "Enable METIS usage" ${MFEM_USE_MPI})
 option(MFEM_USE_EXCEPTIONS "Enable the use of exceptions" OFF)
-option(MFEM_USE_ZLIB "Enable zlib for compressed data streams." OFF)
+option(MFEM_USE_GZSTREAM "Enable gzstream for compressed data streams." OFF)
 option(MFEM_USE_LIBUNWIND "Enable backtrace for errors." OFF)
 option(MFEM_USE_LAPACK "Enable LAPACK usage" OFF)
 option(MFEM_THREAD_SAFE "Enable thread safety" OFF)
@@ -33,29 +33,18 @@ option(MFEM_USE_SUNDIALS "Enable SUNDIALS usage" OFF)
 option(MFEM_USE_MESQUITE "Enable MESQUITE usage" OFF)
 option(MFEM_USE_SUITESPARSE "Enable SuiteSparse usage" OFF)
 option(MFEM_USE_SUPERLU "Enable SuperLU_DIST usage" OFF)
-option(MFEM_USE_SUPERLU5 "Use the old SuperLU_DIST 5.1 version" OFF)
-option(MFEM_USE_MUMPS "Enable MUMPS usage" OFF)
 option(MFEM_USE_STRUMPACK "Enable STRUMPACK usage" OFF)
-option(MFEM_USE_GINKGO "Enable Ginkgo usage" OFF)
-option(MFEM_USE_AMGX "Enable AmgX usage" OFF)
+option(MFEM_USE_GECKO "Enable GECKO usage" OFF)
 option(MFEM_USE_GNUTLS "Enable GNUTLS usage" OFF)
-option(MFEM_USE_GSLIB "Enable GSLIB usage" OFF)
 option(MFEM_USE_NETCDF "Enable NETCDF usage" OFF)
 option(MFEM_USE_PETSC "Enable PETSc support." OFF)
-option(MFEM_USE_SLEPC "Enable SLEPc support." OFF)
 option(MFEM_USE_MPFR "Enable MPFR usage." OFF)
 option(MFEM_USE_SIDRE "Enable Axom/Sidre usage" OFF)
 option(MFEM_USE_CONDUIT "Enable Conduit usage" OFF)
 option(MFEM_USE_PUMI "Enable PUMI" OFF)
-option(MFEM_USE_HIOP "Enable HiOp" OFF)
 option(MFEM_USE_CUDA "Enable CUDA" OFF)
 option(MFEM_USE_OCCA "Enable OCCA" OFF)
 option(MFEM_USE_RAJA "Enable RAJA" OFF)
-option(MFEM_USE_CEED "Enable CEED" OFF)
-option(MFEM_USE_UMPIRE "Enable Umpire" OFF)
-option(MFEM_USE_SIMD "Enable use of SIMD intrinsics" OFF)
-option(MFEM_USE_ADIOS2 "Enable ADIOS2" OFF)
-option(MFEM_USE_MKL_CPARDISO "Enable MKL CPardiso" OFF)

 set(MFEM_MPI_NP 4 CACHE STRING "Number of processes used for MPI tests")

@@ -92,8 +81,6 @@ set(METIS_DIR "${MFEM_DIR}/../metis-4.0" CACHE PATH "Path to the METIS library."

 set(LIBUNWIND_DIR "" CACHE PATH "Path to Libunwind.")

-# For sundials_nvecmpiplusx and nvecparallel remember to build with MPI_ENABLE=ON
-# and modify cmake variables for hypre for sundials
 set(SUNDIALS_DIR "${MFEM_DIR}/../sundials-5.0.0/instdir" CACHE PATH
    "Path to the SUNDIALS library.")
 # The following may be necessary, if SUNDIALS was built with KLU:
@@ -113,21 +100,12 @@ set(ParMETIS_DIR "${MFEM_DIR}/../parmetis-4.0.3" CACHE PATH
 set(ParMETIS_REQUIRED_PACKAGES "METIS" CACHE STRING
    "Additional packages required by ParMETIS.")

-set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_6.3.1" CACHE PATH
+set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_5.1.0" CACHE PATH
    "Path to the SuperLU_DIST library.")
 # SuperLU_DIST may also depend on "OpenMP", depending on how it was compiled.
 set(SuperLUDist_REQUIRED_PACKAGES "MPI" "BLAS" "ParMETIS" CACHE STRING
    "Additional packages required by SuperLU_DIST.")

-set(MUMPS_DIR "${MFEM_DIR}/../MUMPS_5.2.0" CACHE PATH
-    "Path to the MUMPS library.")
-# Packages required by MUMPS, depending on how it was compiled.
-set(MUMPS_REQUIRED_PACKAGES "MPI" "BLAS" "METIS" "ScaLAPACK" CACHE STRING
-    "Additional packages required by MUMPS.")    
-# If the MPI package does not find all required Fortran libraries:
-# set(MUMPS_REQUIRED_LIBRARIES "gfortran" "mpi_mpifh" CACHE STRING
-#     "Additional libraries required by MUMPS.")    
-
 set(STRUMPACK_DIR "${MFEM_DIR}/../STRUMPACK-build" CACHE PATH
    "Path to the STRUMPACK library.")
 # STRUMPACK may also depend on "OpenMP", depending on how it was compiled.
@@ -156,14 +134,10 @@ set(ScaLAPACK_TARGET_NAMES scalapack)
 # set(ScaLAPACK_TARGET_FORCE)
 # set(ScaLAPACK_IMPORT_CONFIG DEBUG)

-set(Ginkgo_DIR "${MFEM_DIR}/../ginkgo" CACHE PATH "Path to the Ginkgo library.")
-
-set(AMGX_DIR "${MFEM_DIR}/../amgx" CACHE PATH "Path to AmgX")
+set(GECKO_DIR "${MFEM_DIR}/../gecko" CACHE PATH "Path to the Gecko library.")

 set(GNUTLS_DIR "" CACHE PATH "Path to the GnuTLS library.")

-set(GSLIB_DIR "" CACHE PATH "Path to the GSLIB library.")
-
 set(NETCDF_DIR "" CACHE PATH "Path to the NetCDF library.")
 # May need to add "HDF5" as requirement.
 set(NetCDF_REQUIRED_PACKAGES "" CACHE STRING
@@ -173,10 +147,6 @@ set(PETSC_DIR "${MFEM_DIR}/../petsc" CACHE PATH
    "Path to the PETSc main directory.")
 set(PETSC_ARCH "arch-linux2-c-debug" CACHE STRING "PETSc build architecture.")

-set(SLEPC_DIR "${MFEM_DIR}/../slepc" CACHE PATH
-    "Path to the SLEPc main directory.")
-set(SLEPC_ARCH "arch-linux2-c-debug" CACHE STRING "SLEPC build architecture.")
-
 set(MPFR_DIR "" CACHE PATH "Path to the MPFR library.")

 set(CONDUIT_DIR "${MFEM_DIR}/../conduit" CACHE PATH
@@ -190,19 +160,8 @@ set(Axom_REQUIRED_PACKAGES "Conduit/relay/blueprint" CACHE STRING
 set(PUMI_DIR "${MFEM_DIR}/../pumi-2.1.0" CACHE STRING
    "Directory where PUMI is installed")

-set(HIOP_DIR "${MFEM_DIR}/../hiop/install" CACHE STRING
-    "Directory where HiOp is installed")
-set(HIOP_REQUIRED_PACKAGES "BLAS" "LAPACK" CACHE STRING
-    "Packages that HiOp depends on.")
-
-set(MKL_CPARDISO_DIR "" CACHE STRING "MKL installation path.")
-set(MKL_MPI_WRAPPER_LIB "mkl_blacs_mpich_lp64" CACHE STRING "MKL MPI wrapper library")
-set(MKL_LIBRARY_DIR "" CACHE STRING "Custom library subdirectory")
-
 set(OCCA_DIR "${MFEM_DIR}/../occa" CACHE PATH "Path to OCCA")
 set(RAJA_DIR "${MFEM_DIR}/../raja" CACHE PATH "Path to RAJA")
-set(CEED_DIR "${MFEM_DIR}/../libCEED" CACHE PATH "Path to libCEED")
-set(UMPIRE_DIR "${MFEM_DIR}/../umpire" CACHE PATH "Path to Umpire")

 set(BLAS_INCLUDE_DIRS "" CACHE STRING "Path to BLAS headers.")
 set(BLAS_LIBRARIES "" CACHE STRING "The BLAS library.")
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # This file describes the default MFEM build options.
 #
@@ -53,8 +53,6 @@ HIP_CXX = hipcc
 # gfx900, gfx1010, etc.
 HIP_ARCH = gfx900
 HIP_FLAGS = --amdgpu-target=$(HIP_ARCH)
-HIP_XCOMPILER =
-HIP_XLINKER   = -Wl,

 ifneq ($(NOTMAC),)
   AR      = ar
@@ -110,7 +108,7 @@ MFEM_USE_METIS         = $(MFEM_USE_MPI)
 MFEM_USE_METIS_5       = NO
 MFEM_DEBUG             = NO
 MFEM_USE_EXCEPTIONS    = NO
-MFEM_USE_ZLIB          = NO
+MFEM_USE_GZSTREAM      = NO
 MFEM_USE_LIBUNWIND     = NO
 MFEM_USE_LAPACK        = NO
 MFEM_THREAD_SAFE       = NO
@@ -122,46 +120,25 @@ MFEM_USE_SUNDIALS      = NO
 MFEM_USE_MESQUITE      = NO
 MFEM_USE_SUITESPARSE   = NO
 MFEM_USE_SUPERLU       = NO
-MFEM_USE_SUPERLU5      = NO
-MFEM_USE_MUMPS         = NO
 MFEM_USE_STRUMPACK     = NO
-MFEM_USE_GINKGO        = NO
-MFEM_USE_AMGX          = NO
+MFEM_USE_GECKO         = NO
 MFEM_USE_GNUTLS        = NO
 MFEM_USE_NETCDF        = NO
 MFEM_USE_PETSC         = NO
-MFEM_USE_SLEPC         = NO
 MFEM_USE_MPFR          = NO
 MFEM_USE_SIDRE         = NO
 MFEM_USE_CONDUIT       = NO
 MFEM_USE_PUMI          = NO
-MFEM_USE_HIOP          = NO
-MFEM_USE_GSLIB         = NO
 MFEM_USE_CUDA          = NO
 MFEM_USE_HIP           = NO
 MFEM_USE_RAJA          = NO
 MFEM_USE_OCCA          = NO
-MFEM_USE_CEED          = NO
-MFEM_USE_UMPIRE        = NO
-MFEM_USE_SIMD          = NO
-MFEM_USE_ADIOS2        = NO
-MFEM_USE_MKL_CPARDISO  = NO
-
-# MPI library compile and link flags
-# These settings are used only when building MFEM with MPI + HIP
-ifeq ($(MFEM_USE_MPI)$(MFEM_USE_HIP),YESYES)
-   # We determine MPI_DIR assuming $(MPICXX) is in $(MPI_DIR)/bin
-   MPI_DIR := $(patsubst %/,%,$(dir $(shell which $(MPICXX))))
-   MPI_DIR := $(patsubst %/,%,$(dir $(MPI_DIR)))
-   MPI_OPT = -I$(MPI_DIR)/include
-   MPI_LIB = -L$(MPI_DIR)/lib $(XLINKER)-rpath,$(MPI_DIR)/lib -lmpi
-endif

 # Compile and link options for zlib.
 ZLIB_DIR =
 ZLIB_OPT = $(if $(ZLIB_DIR),-I$(ZLIB_DIR)/include)
 ZLIB_LIB = $(if $(ZLIB_DIR),$(ZLIB_RPATH) -L$(ZLIB_DIR)/lib ,)-lz
-ZLIB_RPATH = $(XLINKER)-rpath,$(ZLIB_DIR)/lib
+ZLIB_RPATH = -Wl,-rpath,$(ZLIB_DIR)/lib

 LIBUNWIND_OPT = -g
 LIBUNWIND_LIB = $(if $(NOTMAC),-lunwind -ldl,)
@@ -172,7 +149,7 @@ HYPRE_OPT = -I$(HYPRE_DIR)/include
 HYPRE_LIB = -L$(HYPRE_DIR)/lib -lHYPRE

 # METIS library configuration
-ifeq ($(MFEM_USE_SUPERLU)$(MFEM_USE_STRUMPACK)$(MFEM_USE_MUMPS),NONONO)
+ifeq ($(MFEM_USE_SUPERLU)$(MFEM_USE_STRUMPACK),NONO)
   ifeq ($(MFEM_USE_METIS_5),NO)
     METIS_DIR = @MFEM_DIR@/../metis-4.0
     METIS_OPT =
@@ -205,19 +182,13 @@ OPENMP_LIB =
 POSIX_CLOCKS_LIB = -lrt

 # SUNDIALS library configuration
-# For sundials_nvecmpiplusx and nvecparallel remember to build with MPI_ENABLE=ON
-# and modify cmake variables for hypre for sundials
-SUNDIALS_DIR    = @MFEM_DIR@/../sundials-5.0.0/instdir
-SUNDIALS_OPT    = -I$(SUNDIALS_DIR)/include
-SUNDIALS_LIBDIR = $(wildcard $(SUNDIALS_DIR)/lib*)
-SUNDIALS_LIB    = $(XLINKER)-rpath,$(SUNDIALS_LIBDIR) -L$(SUNDIALS_LIBDIR)\
- -lsundials_arkode -lsundials_cvodes -lsundials_nvecserial -lsundials_kinsol
+SUNDIALS_DIR = @MFEM_DIR@/../sundials-5.0.0/instdir
+SUNDIALS_OPT = -I$(SUNDIALS_DIR)/include
+SUNDIALS_LIB = -Wl,-rpath,$(SUNDIALS_DIR)/lib64 -L$(SUNDIALS_DIR)/lib64\
+ -lsundials_arkode -lsundials_cvode -lsundials_nvecserial -lsundials_kinsol

 ifeq ($(MFEM_USE_MPI),YES)
-   SUNDIALS_LIB += -lsundials_nvecparallel -lsundials_nvecmpiplusx
-endif
-ifeq ($(MFEM_USE_CUDA),YES)
-   SUNDIALS_LIB += -lsundials_nveccuda
+   SUNDIALS_LIB += -lsundials_nvecparhyp -lsundials_nvecparallel
 endif
 # If SUNDIALS was built with KLU:
 # MFEM_USE_SUITESPARSE = YES
@@ -231,22 +202,14 @@ MESQUITE_LIB = -L$(MESQUITE_DIR)/lib -lmesquite
 LIB_RT = $(if $(NOTMAC),-lrt,)
 SUITESPARSE_DIR = @MFEM_DIR@/../SuiteSparse
 SUITESPARSE_OPT = -I$(SUITESPARSE_DIR)/include
-SUITESPARSE_LIB = $(XLINKER)-rpath,$(SUITESPARSE_DIR)/lib\
- -L$(SUITESPARSE_DIR)/lib -lklu -lbtf -lumfpack -lcholmod -lcolamd -lamd -lcamd\
- -lccolamd -lsuitesparseconfig $(LIB_RT) $(METIS_LIB) $(LAPACK_LIB)
+SUITESPARSE_LIB = -Wl,-rpath,$(SUITESPARSE_DIR)/lib -L$(SUITESPARSE_DIR)/lib\
+ -lklu -lbtf -lumfpack -lcholmod -lcolamd -lamd -lcamd -lccolamd\
+ -lsuitesparseconfig $(LIB_RT) $(METIS_LIB) $(LAPACK_LIB)

 # SuperLU library configuration
-ifeq ($(MFEM_USE_SUPERLU5),YES)
-   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_5.1.0
-   SUPERLU_OPT = -I$(SUPERLU_DIR)/include
-   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib -L$(SUPERLU_DIR)/lib\
-      -lsuperlu_dist_5.1.0
-else
-   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_6.3.1
-   SUPERLU_OPT = -I$(SUPERLU_DIR)/include
-   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib64 -L$(SUPERLU_DIR)/lib64\
-      -lsuperlu_dist -lblas
-endif
+SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_5.1.0
+SUPERLU_OPT = -I$(SUPERLU_DIR)/SRC
+SUPERLU_LIB = -Wl,-rpath,$(SUPERLU_DIR)/lib -L$(SUPERLU_DIR)/lib -lsuperlu_dist_5.1.0

 # SCOTCH library configuration (required by STRUMPACK <= v2.1.0, optional in
 # STRUMPACK >= v2.2.0)
@@ -255,12 +218,12 @@ SCOTCH_OPT = -I$(SCOTCH_DIR)/include
 SCOTCH_LIB = -L$(SCOTCH_DIR)/lib -lptscotch -lptscotcherr -lscotch -lscotcherr\
 -lpthread

-# SCALAPACK library configuration (required by STRUMPACK and MUMPS)
+# SCALAPACK library configuration (required by STRUMPACK)
 SCALAPACK_DIR = @MFEM_DIR@/../scalapack-2.0.2
 SCALAPACK_OPT = -I$(SCALAPACK_DIR)/SRC
 SCALAPACK_LIB = -L$(SCALAPACK_DIR)/lib -lscalapack $(LAPACK_LIB)

-# MPI Fortran library, needed e.g. by STRUMPACK or MUMPS
+# MPI Fortran library, needed e.g. by STRUMPACK
 # MPICH:
 MPI_FORTRAN_LIB = -lmpifort
 # OpenMPI:
@@ -268,12 +231,6 @@ MPI_FORTRAN_LIB = -lmpifort
 # Additional Fortan library:
 # MPI_FORTRAN_LIB += -lgfortran

-# MUMPS library configuration
-MUMPS_DIR = @MFEM_DIR@/../MUMPS_5.2.0
-MUMPS_OPT = -I$(MUMPS_DIR)/include
-MUMPS_LIB = $(XLINKER)-rpath,$(MUMPS_DIR)/lib -L$(MUMPS_DIR)/lib -ldmumps\
- -lmumps_common -lpord $(SCALAPACK_LIB) $(LAPACK_LIB) $(MPI_FORTRAN_LIB)
-
 # STRUMPACK library configuration
 STRUMPACK_DIR = @MFEM_DIR@/../STRUMPACK-build
 STRUMPACK_OPT = -I$(STRUMPACK_DIR)/include $(SCOTCH_OPT)
@@ -282,16 +239,10 @@ STRUMPACK_OPT = -I$(STRUMPACK_DIR)/include $(SCOTCH_OPT)
 STRUMPACK_LIB = -L$(STRUMPACK_DIR)/lib -lstrumpack $(MPI_FORTRAN_LIB)\
 $(SCOTCH_LIB) $(SCALAPACK_LIB)

-# Ginkgo library configuration (currently not needed)
-GINKGO_DIR = @MFEM_DIR@/../ginkgo/install
-GINKGO_OPT = -isystem $(GINKGO_DIR)/include
-GINKGO_LIB = $(XLINKER)-rpath,$(GINKGO_DIR)/lib -L$(GINKGO_DIR)/lib -lginkgo\
- -lginkgo_omp -lginkgo_cuda -lginkgo_reference
-
-# AmgX library configuration
-AMGX_DIR = @MFEM_DIR@/../amgx
-AMGX_OPT = -I$(AMGX_DIR)/include
-AMGX_LIB = -lcusparse -lcusolver -lcublas -lnvToolsExt -L$(AMGX_DIR)/lib -lamgx
+# Gecko library configuration
+GECKO_DIR = @MFEM_DIR@/../gecko
+GECKO_OPT = -I$(GECKO_DIR)/inc
+GECKO_LIB = -L$(GECKO_DIR)/lib -lgecko

 # GnuTLS library configuration
 GNUTLS_OPT =
@@ -301,8 +252,8 @@ GNUTLS_LIB = -lgnutls
 NETCDF_DIR = $(HOME)/local
 HDF5_DIR   = $(HOME)/local
 NETCDF_OPT = -I$(NETCDF_DIR)/include -I$(HDF5_DIR)/include $(ZLIB_OPT)
-NETCDF_LIB = $(XLINKER)-rpath,$(NETCDF_DIR)/lib -L$(NETCDF_DIR)/lib\
- $(XLINKER)-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib\
+NETCDF_LIB = -Wl,-rpath,$(NETCDF_DIR)/lib -L$(NETCDF_DIR)/lib\
+ -Wl,-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib\
 -lnetcdf -lhdf5_hl -lhdf5 $(ZLIB_LIB)

 # PETSc library configuration (version greater or equal to 3.8 or the dev branch)
@@ -314,25 +265,9 @@ PETSC_INC_VAR = PETSC_CC_INCLUDES
 PETSC_LIB_VAR = PETSC_EXTERNAL_LIB_BASIC
 ifeq ($(PETSC_FOUND),YES)
   PETSC_OPT := $(shell sed -n "s/$(PETSC_INC_VAR) = *//p" $(PETSC_VARS))
-   PETSC_DEP := $(shell sed -n "s/$(PETSC_LIB_VAR) = *//p" $(PETSC_VARS))
-   PETSC_LIB = $(XLINKER)-rpath,$(abspath $(PETSC_DIR))/lib\
-      -L$(abspath $(PETSC_DIR))/lib -lpetsc\
-      $(subst $(CXX_XLINKER),$(XLINKER),$(PETSC_DEP))
-endif
-
-SLEPC_DIR := $(MFEM_DIR)/../slepc
-SLEPC_VARS := $(SLEPC_DIR)/lib/slepc/conf/slepc_variables
-SLEPC_FOUND := $(if $(wildcard $(SLEPC_VARS)),YES,)
-SLEPC_INC_VAR = SLEPC_INCLUDE
-SLEPC_LIB_VAR = SLEPC_EXTERNAL_LIB
-ifeq ($(SLEPC_FOUND),YES)
-   SLEPC_OPT := $(shell sed -n "s/$(SLEPC_INC_VAR) *= *//p" $(SLEPC_VARS))
-   # Some additional external libraries might be defined in this file
-   -include ${SLEPC_DIR}/${PETSC_ARCH}/lib/slepc/conf/slepcvariables
-   SLEPC_DEP := $(shell sed -n "s/$(SLEPC_LIB_VAR) *= *//p" $(SLEPC_VARS))
-   SLEPC_LIB = $(XLINKER)-rpath,$(abspath $(SLEPC_DIR))/$(PETSC_ARCH)/lib\
-      -L$(abspath $(SLEPC_DIR))/$(PETSC_ARCH)/lib -lslepc\
-      $(subst $(CXX_XLINKER),$(XLINKER),$(SLEPC_DEP))
+   PETSC_LIB := $(shell sed -n "s/$(PETSC_LIB_VAR) = *//p" $(PETSC_VARS))
+   PETSC_LIB := -Wl,-rpath,$(abspath $(PETSC_DIR))/lib\
+      -L$(abspath $(PETSC_DIR))/lib -lpetsc $(PETSC_LIB)
 endif

 # MPFR library configuration
@@ -343,7 +278,7 @@ MPFR_LIB = -lmpfr
 CONDUIT_DIR = @MFEM_DIR@/../conduit
 CONDUIT_OPT = -I$(CONDUIT_DIR)/include/conduit
 CONDUIT_LIB = \
-   $(XLINKER)-rpath,$(CONDUIT_DIR)/lib -L$(CONDUIT_DIR)/lib \
+   -Wl,-rpath,$(CONDUIT_DIR)/lib -L$(CONDUIT_DIR)/lib \
   -lconduit -lconduit_relay -lconduit_blueprint  -ldl

 # Check if Conduit was built with hdf5 support, by looking
@@ -351,7 +286,7 @@ CONDUIT_LIB = \
 CONDUIT_HDF5_HEADER=$(CONDUIT_DIR)/include/conduit/conduit_relay_hdf5.hpp
 ifneq (,$(wildcard $(CONDUIT_HDF5_HEADER)))
   CONDUIT_OPT += -I$(HDF5_DIR)/include
-   CONDUIT_LIB += $(XLINKER)-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib \
+   CONDUIT_LIB += -Wl,-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib \
                  -lhdf5 $(ZLIB_LIB)
 endif

@@ -361,9 +296,9 @@ SIDRE_DIR = @MFEM_DIR@/../axom
 SIDRE_OPT = -I$(SIDRE_DIR)/include -I$(CONDUIT_DIR)/include/conduit\
 -I$(HDF5_DIR)/include
 SIDRE_LIB = \
-   $(XLINKER)-rpath,$(SIDRE_DIR)/lib -L$(SIDRE_DIR)/lib \
-   $(XLINKER)-rpath,$(CONDUIT_DIR)/lib -L$(CONDUIT_DIR)/lib \
-   $(XLINKER)-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib \
+   -Wl,-rpath,$(SIDRE_DIR)/lib -L$(SIDRE_DIR)/lib \
+   -Wl,-rpath,$(CONDUIT_DIR)/lib -L$(CONDUIT_DIR)/lib \
+   -Wl,-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib \
   -laxom -lconduit -lconduit_relay -lconduit_blueprint -lhdf5 $(ZLIB_LIB) -ldl

 # PUMI
@@ -373,19 +308,9 @@ PUMI_OPT = -I$(PUMI_DIR)/include
 PUMI_LIB = -L$(PUMI_DIR)/lib -lpumi -lcrv -lma -lmds -lapf -lpcu -lgmi -lparma\
   -llion -lmth -lapf_zoltan -lspr

-# HIOP
-HIOP_DIR = @MFEM_DIR@/../hiop/install
-HIOP_OPT = -I$(HIOP_DIR)/include
-HIOP_LIB = -L$(HIOP_DIR)/lib -lhiop $(LAPACK_LIB)
-
-# GSLIB library
-GSLIB_DIR = @MFEM_DIR@/../gslib/build
-GSLIB_OPT = -I$(GSLIB_DIR)/include
-GSLIB_LIB = -L$(GSLIB_DIR)/lib -lgs
-
-# CUDA library configuration
+# CUDA library configuration (currently not needed)
 CUDA_OPT =
-CUDA_LIB = -lcusparse
+CUDA_LIB =

 # HIP library configuration (currently not needed)
 HIP_OPT =
@@ -396,11 +321,6 @@ OCCA_DIR = @MFEM_DIR@/../occa
 OCCA_OPT = -I$(OCCA_DIR)/include
 OCCA_LIB = $(XLINKER)-rpath,$(OCCA_DIR)/lib -L$(OCCA_DIR)/lib -locca

-# libCEED library configuration
-CEED_DIR ?= @MFEM_DIR@/../libCEED
-CEED_OPT = -I$(CEED_DIR)/include
-CEED_LIB = $(XLINKER)-rpath,$(CEED_DIR)/lib -L$(CEED_DIR)/lib -lceed
-
 # RAJA library configuration
 RAJA_DIR = @MFEM_DIR@/../raja
 RAJA_OPT = -I$(RAJA_DIR)/include
@@ -409,20 +329,6 @@ ifdef CUB_DIR
 endif
 RAJA_LIB = $(XLINKER)-rpath,$(RAJA_DIR)/lib -L$(RAJA_DIR)/lib -lRAJA

-# UMPIRE library configuration
-UMPIRE_DIR = @MFEM_DIR@/../umpire
-UMPIRE_OPT = -I$(UMPIRE_DIR)/include
-UMPIRE_LIB = -L$(UMPIRE_DIR)/lib -lumpire
-
-# MKL CPardiso library configuration
-MKL_CPARDISO_DIR ?=
-MKL_MPI_WRAPPER ?= mkl_blacs_mpich_lp64
-MKL_LIBRARY_SUBDIR ?= lib
-MKL_CPARDISO_OPT = -I$(MKL_CPARDISO_DIR)/include
-MKL_CPARDISO_LIB = $(XLINKER)-rpath,$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
-   -L$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR) -l$(MKL_MPI_WRAPPER)\
-   -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
-
 # If YES, enable some informational messages
 VERBOSE = NO

@@ -1,13 +1,13 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
+// Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+// the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+// reserved. See file COPYRIGHT for details.
 //
 // This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
+// availability see http://mfem.org.
 //
 // MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
+// terms of the GNU Lesser General Public License (as published by the Free
+// Software Foundation) version 2.1 dated February 1999.

 #include "HYPRE_config.h"
 #include <cstdio>
@@ -1,33 +0,0 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
-//
-// This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
-//
-// MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
-
-#include "dmumps_c.h"
-#include <string>
-#include <iostream>
-#include <algorithm>
-
-// Macros to expand a macro as a string
-#define STR_EXPAND(s) #s
-#define STR(s) STR_EXPAND(s)
-
-int main()
-{
-#ifdef MUMPS_VERSION
-   const char *ptr = STR(MUMPS_VERSION);
-   std::string s(ptr);
-   s.erase(std::remove(s.begin(), s.end(), '"'), s.end());
-   s.erase(std::remove(s.begin(), s.end(), '.'), s.end());
-   std::cout << s << "\n";
-   return 0;
-#else
-   return -1;
-#endif
-}
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 SRC = $(if $(MFEM_DIR),$(MFEM_DIR)/config/,)

@@ -42,10 +42,6 @@ GHV_FLAGS = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(HYPRE_OPT))
 SMX = $(if $(MFEM_USE_PUMI:NO=),MFEM_USE_SIMMETRIX)
 SMX_PATH = $(PUMI_DIR)/include/gmi_sim.h
 SMX_FILE = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(SMX_PATH))
-MUMPS = $(MFEM_USE_MUMPS:NO=)
-GMV_CXX ?= $(MFEM_CXX)
-GMV = get_mumps_version
-GMV_FLAGS = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(MUMPS_OPT))

 $(GHV): $(SRC)$(GHV).cpp
 	$(call mfem-info, Determining HYPRE version ...)
@@ -54,13 +50,6 @@ $(GHV).out: $(GHV)
 	./$(GHV) > $(GHV).out
 .INTERMEDIATE: $(GHV) $(GHV).out

-$(GMV): $(SRC)$(GMV).cpp
-	$(call mfem-info, Determining MUMPS version ...)
-	$(GMV_CXX) ${GMV_FLAGS} $(SRC)$(GMV).cpp -o $(GMV)
-$(GMV).out: $(GMV)
-	./$(GMV) > $(GMV).out
-.INTERMEDIATE: $(GMV) $(GMV).out
-
 get-hypre-version: $(GHV).out
 	$(eval MFEM_HYPRE_VERSION:=$(shell cat $(GHV).out))
 	$(if $(MFEM_HYPRE_VERSION),$(eval export MFEM_HYPRE_VERSION)\
@@ -73,18 +62,10 @@ check-smx:
 	$(call mfem-info, MFEM_USE_SIMMETRIX = $(MFEM_USE_SIMMETRIX))
 	$(eval export MFEM_USE_SIMMETRIX)

-get-mumps-version: $(GMV).out
-	$(eval MFEM_MUMPS_VERSION:=$(shell cat $(GMV).out))
-	$(if $(MFEM_MUMPS_VERSION),$(eval export MFEM_MUMPS_VERSION)\
-	$(info MUMPS version: $(MFEM_MUMPS_VERSION)),\
-	$(error Unable to determine MUMPS version))
-
-header: $(if $(MPI),get-hypre-version,) $(if $(SMX),check-smx,) \
- $(if $(MUMPS),get-mumps-version,)
+header: $(if $(MPI),get-hypre-version,) $(if $(SMX),check-smx)
 	$(call mfem-info, Writing $(CONFIG_HPP) ...)
 	@set -- && \
-	for def in $${MFEM_DEFINES} $(if $(MPI),MFEM_HYPRE_VERSION) $(SMX) \
-	           $(if $(MUMPS),MFEM_MUMPS_VERSION); do \
+	for def in $${MFEM_DEFINES} $(if $(MPI),MFEM_HYPRE_VERSION) $(SMX); do \
 	   eval var=\$$$$def && \
 	   if [ "NO" != "$${var}" ]; then \
 	      set -- "$$@" -e "s|// \(#define $${def} \)|\1|" && \
@@ -1,15 +1,15 @@
 #!/bin/bash

-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 make="${MAKE:-make}"
 mpiexec="${MPIEXEC:-mpirun}"
@@ -47,11 +47,7 @@ groups_serial=(
   "Meshing miniapps:"
   "miniapps/meshing"
   "mobius-strip.cpp klein-bottle.cpp extruder.cpp toroid.cpp
-    mesh-optimizer.cpp minimal-surface.cpp"'
-'"convergence"
-   "Convergence tests:"
-   "tests/convergence"
-   "rates.cpp"'
+    mesh-optimizer.cpp"'
 )
 # Parallel groups
 groups_parallel=(
@@ -76,20 +72,12 @@ groups_parallel=(
 '"meshing"
   "Meshing miniapps:"
   "miniapps/meshing"
-   "pmesh-optimizer.cpp pminimal-surface.cpp"'
+   "pmesh-optimizer.cpp"'
 '"electromagnetics"
   "Electromagnetics miniapps:"
   "miniapps/electromagnetics"
   "joule.cpp"'
 #   "{volta,tesla,joule}.cpp"' # todo: multiline sample runs
-'"convergence"
-   "Convergence tests:"
-   "tests/convergence"
-   "prates.cpp"'
-'"par-mesh-format"
-   "Parallel mesh tests:"
-   "tests/par-mesh-format"
-   "ex1p.cpp"'
 )
 # All groups serial + parallel runs mixed in the same group:
 groups_all=(
@@ -113,20 +101,12 @@ groups_all=(
   "Meshing miniapps:"
   "miniapps/meshing"
   "mobius-strip.cpp klein-bottle.cpp extruder.cpp toroid.cpp
-    {,p}mesh-optimizer.cpp {,p}minimal-surface.cpp"'
+    {,p}mesh-optimizer.cpp"'
 '"electromagnetics"
   "Electromagnetics miniapps:"
   "miniapps/electromagnetics"
   "joule.cpp"'
 #   "{volta,tesla,joule}.cpp"' # todo: multiline sample runs
-'"convergence"
-   "Convergence tests:"
-   "tests/convergence"
-   "{,p}rates.cpp"'
-'"par-mesh-format"
-   "Parallel mesh tests:"
-   "tests/par-mesh-format"
-   "ex1p.cpp"'
 )
 make_all="all"
 base_timeformat=$'real: %3Rs  user: %3Us  sys: %3Ss  %%cpu: %P'
@@ -172,15 +152,6 @@ function extract_sample_runs()
   fi
   if [ "$device_runs" == "yes" ]; then
      runs=`printf "%s" "$runs" | grep ".* -d .*"`
-      if [ "$have_occa" == "no" ]; then
-         runs=`printf "%s" "$runs" | grep -v ".* -d occa-.*"`
-      fi
-      if [ "$have_raja" == "no" ]; then
-         runs=`printf "%s" "$runs" | grep -v ".* -d raja-.*"`
-      fi
-      if [ "$have_ceed" == "no" ]; then
-         runs=`printf "%s" "$runs" | grep -v ".* -d ceed-.*"`
-      fi
   else
      runs=`printf "%s" "$runs" | grep -v ".* -d .*"`
   fi
@@ -221,11 +192,11 @@ function help_message()
      -s|-show    Show all configured sample runs and exit
      -n          Dry run: replace "\$sample_run" with "echo \$sample_run"
      <var>=<value>
-                  Set a shell script variable; see below for valid variables
+                  Set a shell script varible; see below for valid variables
       *          Any other parameter is treated as <mfem_dir>
      <mfem_dir>  [${mfem_dir}] is the MFEM source directory

-   This script tests all the sample runs listed in the beginning comments of
+   This script tests all the sample runs listed in the begining comments of
   MFEM's serial or parallel example and miniapp codes. The list of sample runs
   is auto-generated and can be viewed with the -s|-show option.

@@ -305,8 +276,7 @@ case "$1" in
      ;;
   -dev)
       device_runs="yes"
-       mfem_config+=" MFEM_USE_CUDA=YES MFEM_USE_OPENMP=YES"
-       # OCCA, RAJA, libCEED are enabled below, if available
+       mfem_config+=" MFEM_USE_CUDA=YES MFEM_USE_OCCA=YES MFEM_USE_RAJA=YES MFEM_USE_OPENMP=YES"
      ;;
   -v)
      valgrind="yes"
@@ -400,15 +370,10 @@ function timed_run()
 # This function is used to execute the sample runs
 function go()
 {
-   # Strip leading and trailing spaces from $1 and store the result in cmd_line
-   shopt -s extglob
-   local cmd_line="${1##+( )}"
-   cmd_line="${cmd_line%%+( )}"
-   shopt -u extglob
-   eval local cmd=(${cmd_line})
+   local cmd=("$@")
   local res=""
   echo $sep
-   echo "<${group}>" "${cmd_line}"
+   echo "<${group}>" "${cmd[@]}"
   echo $sep
   if [ "${timing}" == "yes" ]; then
      timed_run "${cmd[@]}"
@@ -420,15 +385,15 @@ function go()
   else
      res="${red}FAILED${none}"
   fi
-   printf "[${res}] <${group}> ${cmd_line}\n"
+   printf "[${res}] <${group}> ${cmd[*]}\n"
   if [ "${timing}" == "yes" ]; then
      printf "Run time: %s\n" "${timer}"
      timer=(${timer})
      timer="${timer[1]}"
-      printf -v line "[$res](%8s) ${cmd_line}" "$timer"
+      printf -v line "[$res](%8s) ${cmd[*]}" "$timer"
      summary=("${summary[@]}" "$line")
   else
-      summary=("${summary[@]}" "[${res}] ${cmd_line}")
+      summary=("${summary[@]}" "[${res}] ${cmd[*]}")
   fi
   echo $sep
 }
@@ -463,7 +428,7 @@ function go_group()
      fi
      for run in "${runs[@]}"; do
         if [ "${run}" == "" ]; then continue; fi
-         eval go \"\${run_prefix} \${run} \${run_suffix}\" $output
+         eval go \${run_prefix} \${run} \${run_suffix} $output
      done
   done
   ${make} clean-exec
@@ -492,30 +457,6 @@ fi

 TIMEFORMAT="${base_timeformat}"

-# Setup optional libraries when not using externally built MFEM:
-if [ "${built}" == "no" ]; then
-   have_occa="no"
-   have_raja="no"
-   have_ceed="no"
-   if [ "${device_runs}" == "yes" ]; then
-      if [ -n "${CUDA_ARCH}" ]; then
-         mfem_config+=" CUDA_ARCH=${CUDA_ARCH}"
-      fi
-      if [ -d "${mfem_dir}/../occa" ]; then
-         mfem_config+=" MFEM_USE_OCCA=YES"
-         have_occa="yes"
-      fi
-      if [ -d "${mfem_dir}/../raja" ]; then
-         mfem_config+=" MFEM_USE_RAJA=YES"
-         have_raja="yes"
-      fi
-      if [ -d "${mfem_dir}/../libCEED" ]; then
-         mfem_config+=" MFEM_USE_CEED=YES"
-         have_ceed="yes"
-      fi
-   fi
-fi
-
 function set_echo_log()
 {
   local dirname=`dirname "$1"`
@@ -529,7 +470,7 @@ function echo_run()
 {
   echo "   $@"
   { echo "   $@"; echo "$sep";
-     eval "$@"
+     "$@"
     echo "$sep"; } >> "$echo_log" 2>&1
 }

@@ -549,28 +490,6 @@ function build_all()
   echo_run ${make} config ${mfem_config} || exit 1
   echo_run ${make} ${make_j} || exit 1
   echo_run ${make} ${make_all} ${make_j} || exit 1
-   # Build groups in directories other than the directories built by 'make all':
-   for group_params in "${groups[@]}"; do
-      eval params=(${group_params})
-      group_dir="${params[2]}"
-      case "$group_dir" in
-         (examples*|miniapps*)
-            # Built by 'make all'
-            ;;
-         (*)
-            if [ "${mfem_dir}" != "${mfem_build_dir}" ]; then
-               echo_run mkdir -p "${group_dir}" || exit 1
-               echo_run cd "${group_dir}" || exit 1
-               echo_run cp -af "${mfem_dir}/${group_dir}/makefile" . || exit 1
-            else
-               echo_run cd "${group_dir}" || exit 1
-            fi
-            echo_run ${make} clean || exit 1
-            echo_run ${make} MFEM_DIR="${mfem_dir}" ${make_j} || exit 1
-            echo_run cd "${mfem_build_dir}" || exit 1
-            ;;
-      esac
-   done
 }

 # Function that runs all sample runs, given by the array variable "groups".
@@ -1,13 +1,13 @@
-// Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-// at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-// LICENSE and NOTICE for details. LLNL-CODE-806117.
+// Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at
+// the Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights
+// reserved. See file COPYRIGHT for details.
 //
 // This file is part of the MFEM library. For more information and source code
-// availability visit https://mfem.org.
+// availability see http://mfem.org.
 //
 // MFEM is free software; you can redistribute it and/or modify it under the
-// terms of the BSD-3 license. We welcome feedback and contributions, see file
-// CONTRIBUTING.md for details.
+// terms of the GNU Lesser General Public License (as published by the Free
+// Software Foundation) version 2.1 dated February 1999.

 #ifndef MFEM_TEMPLATE_CONFIG
 #define MFEM_TEMPLATE_CONFIG
@@ -29,20 +29,8 @@
 #define MFEM_ALWAYS_INLINE
 #endif

-// --- MFEM_VECTORIZE_LOOP (disabled)
-#if (__cplusplus >= 201103L) && !defined(MFEM_DEBUG) && defined(__GNUC__)
-//#define MFEM_VECTORIZE_LOOP _Pragma("GCC ivdep")
-#define MFEM_VECTORIZE_LOOP
-#else
-#define MFEM_VECTORIZE_LOOP
-#endif
-
-// MFEM_TEMPLATE_BLOCK_SIZE is the block size used by the template matrix-matrix
-// multiply, Mult_AB, defined in tmatrix.hpp. This parameter will generally
-// require tuning to determine good value. It is probably highly influenced by
-// the SIMD width when Mult_AB is used with a SIMD type like AutoSIMD.
 #define MFEM_TEMPLATE_BLOCK_SIZE 4
-
+#define MFEM_SIMD_SIZE 32
 #define MFEM_TEMPLATE_ENABLE_SERIALIZE

 // #define MFEM_TEMPLATE_ELTRANS_HAS_NODE_DOFS
@@ -50,6 +38,11 @@
 // #define MFEM_TEMPLATE_FIELD_EVAL_DATA_HAS_DOFS
 #define MFEM_TEMPLATE_INTRULE_COEFF_PRECOMP

+// derived macros
+#define MFEM_ROUNDUP(val,base) ((((val)+(base)-1)/(base))*(base))
+#define MFEM_ALIGN_SIZE(size,type) \
+   MFEM_ROUNDUP(size,(MFEM_SIMD_SIZE)/sizeof(type))
+
 #ifdef MFEM_COUNT_FLOPS
 namespace mfem
 {
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 # Utilities for the "make test" and "make check" targets.

@@ -70,10 +70,9 @@ mfem-test = \
 mfem-test-file = \
   printf "   $(3) [$(2) $(1) ... ]: "; \
   $(call $(TIMEFUN),$(TIMECMD),$(2) ./$(1) -no-vis > $(1).stderr 2>&1); \
-   err="$$3"; \
   if [ "$$3" = 0 ] && [ -e $(4) ]; \
-   then $(PRINT_OK); else $(PRINT_FAILED); cat $(1).stderr; err=64; fi; \
-   rm -f $(1).stderr; exit $$err
+   then $(PRINT_OK); else $(PRINT_FAILED); cat $(1).stderr; fi; \
+   rm -f $(1).stderr; exit $$3

 .PHONY: test test-par-YES test-par-NO test-ser test-par test-clean test-print

@@ -83,10 +82,8 @@ test-par-NO:  $(SEQ_$(MFEM_TESTS):=-test-seq)
 test-ser:     test-par-NO
 test-par:     test-par-YES
 test:         all test-par-$(MFEM_USE_MPI) clean-exec
-test-noclean: all test-par-$(MFEM_USE_MPI)
 test-clean: ; @rm -f *.stderr
-test-print: \
- mfem-test=printf "   $(3) [$(2) ./$(1) $(if $(5),,-no-vis )$(if $(4),$(4) )]\n"
+test-print: mfem-test=printf "   $(3) [$(2) ./$(1) -no-vis $(if $(4),$(4) )]\n"
 test-print: mfem-test-file=printf "   $(3) [$(2) ./$(1) -no-vis ]\n"
 test-print: test-par-$(MFEM_USE_MPI)
 ifeq ($(MAKECMDGOALS),test-print)
@@ -31,14 +31,14 @@ POINTS 27 double
 7 0.5 1
 8 0.5 1
 CELLS 8 56
-6 0 18 9 1 19 10
-6 1 19 10 2 20 11
-6 2 20 11 3 21 12
-6 3 21 12 4 22 13
-6 4 22 13 5 23 14
-6 5 23 14 6 24 15
-6 6 24 15 7 25 16
-6 7 25 16 8 26 17
+6 0 9 18 1 10 19
+6 1 10 19 2 11 20
+6 2 11 20 3 12 21
+6 3 12 21 4 13 22
+6 4 13 22 5 14 23
+6 5 14 23 6 15 24
+6 6 15 24 7 16 25
+6 7 16 25 8 17 26
 CELL_TYPES 8
 13
 13
@@ -1,73 +0,0 @@
-MFEM NURBS mesh v1.0
-
-#
-# MFEM Geometry Types (see mesh/geom.hpp):
-#
-# SEGMENT     = 1
-# SQUARE      = 3
-# CUBE        = 5
-#
-
-dimension
-3
-
-elements
-1
-1 5 0 1 2 3 4 5 6 7
-
-boundary
-6
-1 3 0 1 2 3
-1 3 4 5 6 7
-1 3 0 1 5 4
-1 3 1 2 6 5
-1 3 2 3 7 6
-1 3 3 0 4 7
-
-edges
-12
-0 0 1
-0 3 2
-0 4 5
-0 7 6
-1 0 3
-1 1 2
-1 4 7
-1 5 6
-2 0 4
-2 1 5
-2 2 6
-2 3 7
-
-vertices
-8
-
-knotvectors
-3
-1 2 0 0 1 1
-1 2 0 0 1 1
-1 2 0 0 1 1
-
-weights
-1
-1
-1
-1
-1
-1
-1
-1
-
-FiniteElementSpace
-FiniteElementCollection: NURBS1
-VDim: 3
-Ordering: 1
-
-0 0 0
-1 0 0
-1 1 0
-0 1 0
-0 0 1
-1 0 1
-1 1 1
-0 1 1
@@ -1,44 +0,0 @@
-MFEM mesh v1.0
-#
-# MFEM Geometry Types (see mesh/geom.hpp):
-#
-# POINT       = 0
-# SEGMENT     = 1
-# TRIANGLE    = 2
-# SQUARE      = 3
-# TETRAHEDRON = 4
-# CUBE        = 5
-# PRISM       = 6
-#
-
-dimension
-2
-
-elements
-3
-1 3 0 1 4 3
-1 3 3 4 7 6
-1 3 1 2 5 4
-
-boundary
-8
-1 1 0 1
-1 1 1 2
-1 1 2 5
-1 1 5 4
-1 1 4 7
-1 1 7 6
-1 1 6 3
-1 1 3 0
-
-vertices
-8
-2
-0 0
-0.5 0
-1 0
-0 0.5
-0.5 0.5
-1 0.5
-0 1
-0.5 1
@@ -1,86 +0,0 @@
-SetFactory("OpenCASCADE");
-
-// Select periodic mesh by setting this to either 0 - standard, 1 - periodic
-periodic = 1;
-
-// Set the geometry order (1, 2, ..., 9)
-order = 3;
-
-// Set the element type (3 - triangles, 4 - quadrilaterals)
-type = 3;
-
-// Number of radial elements
-nrad = 2;
-
-// Number of azimuthal elements on inner arc
-nazm1 = 3;
-
-// Number of azimuthal elements on outer arc
-nazm2 = 5;
-
-// Note: Using type = 4 with nazm1 != nazm2 can lead to mixed meshes
-//       containing both triangles and quadrilaterals.
-
-// Inner and outer radii
-R1 = 1.0;
-R2 = 2.0;
-
-// Angular size of the sector
-Phi = Pi/3.0;
-
-Point(1) = {0.0, 0, 0, 1.0};
-Point(2) = {R1, 0, 0, 1.0};
-Point(3) = {R2, 0, 0, 1.0};
-Point(4) = {R1*Cos(Phi), R1*Sin(Phi), 0, 1.0};
-Point(5) = {R2*Cos(Phi), R2*Sin(Phi), 0, 1.0};
-Line(1) = {2, 3};
-Line(2) = {4, 5};
-Circle(3) = {2, 1, 4};
-Circle(4) = {3, 1, 5};
-Curve Loop(5) = {1, 4, -2, -3};
-Plane Surface(1) = {5};
-
-Transfinite Curve{1} = nrad+1;
-Transfinite Curve{2} = nrad+1;
-Transfinite Curve{3} = nazm1+1;
-Transfinite Curve{4} = nazm2+1;
-
-If (nazm1 == nazm2)
-   Transfinite Surface{1};
-EndIf
-
-If (type == 4)
-   Recombine Surface {1};
-EndIf
-
-// Set a rotation periodicity constraint:
-If (periodic)
-   Periodic Line{1} = {2} Rotate{{0,0,1}, {0,0,0}, -Phi};
-EndIf
-
-// Tag surfaces and volumes with positive integers
-Physical Curve(1) = {3};
-Physical Curve(2) = {4};
-Physical Curve(3) = {1};
-Physical Curve(4) = {2};
-Physical Surface(1) = {1};
-
-// Optimize the high-order mesh
-// See https://gmsh.info/doc/texinfo/gmsh.html#index-Mesh_002eHighOrderOptimize
-// Mesh.ElementOrder = order;
-// Mesh.HighOrderOptimize = 1;
-
-// Generate 2D mesh
-Mesh 2;
-SetOrder order;
-Mesh.MshFileVersion = 2.2;
-
-// Check the element quality (the Plugin may be called AnalyseCurvedMesh)
-// Plugin(AnalyseMeshQuality).JacobianDeterminant = 1;
-// Plugin(AnalyseMeshQuality).Run;
-
-If (periodic)
-   Save Sprintf("periodic-annulus-sector-t%01g-o%01g.msh", type, order);
-Else
-   Save Sprintf("annulus-sector-t%01g-o%01g.msh", type, order);
-EndIf
@@ -1,192 +0,0 @@
-$MeshFormat
-2.2 0 8
-$EndMeshFormat
-$Nodes
-136
-1 1 0 0
-2 2 0 0
-3 0.5000000000000001 0.8660254037844386 0
-4 1 1.732050807568877 0
-5 1.5 0 0
-6 1.166666666666667 0 0
-7 1.333333333333333 0 0
-8 1.666666666666667 0 0
-9 1.833333333333333 0 0
-10 0.7500000000000002 1.299038105676658 0
-11 0.5833333333333335 1.010362971081845 0
-12 0.6666666666666667 1.154700538379251 0
-13 0.8333333333333335 1.443375672974064 0
-14 0.9166666666666669 1.587713240271471 0
-15 0.9396926207859085 0.3420201433256683 0
-16 0.7660444431189786 0.6427876096865386 0
-17 0.993238357741943 0.1160929141252301 0
-18 0.9730448705798238 0.2306158707424401 0
-19 0.8936326403234125 0.4487991802004617 0
-20 0.8354878114129367 0.5495089780708056 0
-21 0.6862416378687343 0.7273736415730481 0
-22 0.597158591702787 0.8021231927550432 0
-23 1.956295201467611 0.4158233816355181 0
-24 1.827090915285202 0.8134732861515996 0
-25 1.618033988749896 1.175570504584944 0
-26 1.338261212717719 1.486289650954786 0
-27 1.995128100519648 0.1395129474882505 0
-28 1.980536137483141 0.278346201920131 0
-29 1.922523391876638 0.551274711633998 0
-30 1.879385241571817 0.6840402866513373 0
-31 1.765895185717855 0.9389431255717802 0
-32 1.696096192312853 1.059838528466408 0
-33 1.532088886237958 1.285575219373077 0
-34 1.438679600677305 1.389316740917992 0
-35 1.231322950651319 1.576021507213442 0
-36 1.118385806941496 1.658075145110082 0
-37 1.162276263405681 0.6710405135499813 0
-38 1.248615852873337 1.079531485311822 0
-39 1.559209616901855 0.5415673055003691 0
-40 1.478306597054007 0.8535007117539289 0
-41 0.9210953433941653 0.9653302893212266 0
-42 1.296548225291847 0.3150268220262836 0
-43 1.055002035226811 1.358510675893086 0
-44 1.704005774249187 0.2344032256041583 0
-45 0.6403651144647218 0.8991270322967013 0
-46 0.7807302289294435 0.9322286608089638 0
-47 0.864063562262777 1.07656622810637 0
-48 0.8070317811313885 1.187802166891514 0
-49 0.7236984477980553 1.043464599594108 0
-50 1.432182741763949 0.1050089406754279 0
-51 1.364365483527898 0.2100178813508558 0
-52 1.197698816861231 0.2100178813508558 0
-53 1.098849408430616 0.1050089406754279 0
-54 1.265516075097282 0.1050089406754278 0
-55 0.8177280765440409 0.7503018362314346 0
-56 0.869411709969103 0.8578160627763305 0
-57 0.7348318576552288 0.8316090412164392 0
-58 1.177596357123201 0.3240245957927452 0
-59 1.058644488954555 0.3330223695592067 0
-60 1.087610484537871 0.2205785356313179 0
-61 1.267619707955123 0.7318605796179638 0
-62 1.372963152504565 0.7926806456859463 0
-63 1.40174301566045 0.9288443029398934 0
-64 1.325179434266893 1.004187894125858 0
-65 1.219835989717452 0.9433678280578752 0
-66 1.191056126561566 0.8072041708039283 0
-67 1.296399571111008 0.8680242368719107 0
-68 1.532241943619239 0.645545107584889 0
-69 1.505274270336623 0.7495229096694089 0
-70 1.294587381237739 0.6278827775334439 0
-71 1.426898499069797 0.5847250415169065 0
-72 1.399930825787181 0.6887028436014264 0
-73 1.139442349713613 1.041464419981624 0
-74 1.030268846553889 1.003397354651425 0
-75 1.001488983398004 0.8672336973974781 0
-76 1.081882623401843 0.7691371054737297 0
-77 1.110662486557728 0.9053007627276766 0
-78 1.207033584034403 0.5523692830420821 0
-79 1.251790904663125 0.4336980525341829 0
-80 1.384102022495183 0.3905403165176455 0
-81 1.471655819698519 0.4660538110090073 0
-82 1.339344701866461 0.5092115470255447 0
-83 1.73779714915742 0.7228379592678562 0
-84 1.648503383029637 0.6322026323841127 0
-85 1.691571478423774 0.4996526642120855 0
-86 1.823933339945692 0.4577380229238018 0
-87 1.787039416783436 0.5922941012619014 0
-88 1.308379426102925 1.350703595740465 0
-89 1.278497639488131 1.215117540526144 0
-90 1.371755231498856 1.111544491736196 0
-91 1.494894610124376 1.14355749816057 0
-92 1.4064614465962 1.25147448186763 0
-93 1.013887168325833 0.451693600067106 0
-94 1.088081715865757 0.5613670568085436 0
-95 1.03019898997678 0.6616228789288338 0
-96 0.8981217165478794 0.6522052443076862 0
-97 0.9637989050473432 0.5564495572737495 0
-98 1.432367408277627 0.2881522898855752 0
-99 1.568186591263407 0.2612777577448668 0
-100 1.655740388466743 0.3367912522362286 0
-101 1.607475002684299 0.4391792788682989 0
-102 1.519921205480963 0.3636657843769371 0
-103 1.184077913657828 1.17252454883891 0
-104 1.119539974442319 1.265517612365998 0
-105 1.010366471282595 1.2274505470358 0
-106 0.9657309073383804 1.096390418178513 0
-107 1.074904410498104 1.134457483508712 0
-108 1.901335258083062 0.07813440853471942 0
-109 1.802670516166124 0.1562688170694388 0
-110 1.636003849499458 0.156268817069439 0
-111 1.568001924749729 0.07813440853471942 0
-112 1.734668591416396 0.07813440853471944 0
-113 0.8516673450756037 1.318862295748801 0
-114 0.9533346901512071 1.338686485820944 0
-115 1.03666802348454 1.48302405311835 0
-116 1.01833401174227 1.607537430343614 0
-117 0.9350006784089369 1.463199863046207 0
-118 1.710829475874804 0.8268157613523761 0
-119 1.594568036464405 0.8401582365531526 0
-120 1.621535709747021 0.7361804344686326 0
-121 1.52488239428597 0.9608573093642675 0
-122 1.571458191517933 1.068213906974606 0
-123 1.448318812892413 1.036200900550232 0
-124 0.908699126206992 1.207626356963657 0
-125 1.500184666513678 0.1831433492101474 0
-126 1.646765991694905 0.9507607885973723 0
-127 0.9498053499729417 0.7597194708525821 0
-128 1.132839036494479 0.4426958263006443 0
-129 1.149421761057113 1.40110366758032 0
-130 1.243841486887416 1.443696659267553 0
-131 1.134903597606542 1.530869109405537 0
-132 1.872198725728137 0.3553499962917315 0
-133 1.788102249988661 0.2948766109479449 0
-134 1.893223337417325 0.2174207916708467 0
-135 1.213959700272622 1.308110604053232 0
-136 1.739836864206217 0.3972646375800152 0
-$EndNodes
-$Elements
-38
-1 26 2 3 1 1 5 6 7
-2 26 2 3 1 5 2 8 9
-3 26 2 4 2 3 10 11 12
-4 26 2 4 2 10 4 13 14
-5 26 2 1 3 1 15 17 18
-6 26 2 1 3 15 16 19 20
-7 26 2 1 3 16 3 21 22
-8 26 2 2 4 2 23 27 28
-9 26 2 2 4 23 24 29 30
-10 26 2 2 4 24 25 31 32
-11 26 2 2 4 25 26 33 34
-12 26 2 2 4 26 4 35 36
-13 21 2 1 1 3 41 10 45 46 47 48 12 11 49
-14 21 2 1 1 5 42 1 50 51 52 53 6 7 54
-15 21 2 1 1 16 41 3 55 56 46 45 22 21 57
-16 21 2 1 1 1 42 15 53 52 58 59 18 17 60
-17 21 2 1 1 37 40 38 61 62 63 64 65 66 67
-18 21 2 1 1 39 40 37 68 69 62 61 70 71 72
-19 21 2 1 1 38 41 37 73 74 75 76 66 65 77
-20 21 2 1 1 37 42 39 78 79 80 81 71 70 82
-21 21 2 1 1 24 39 23 83 84 85 86 29 30 87
-22 21 2 1 1 26 38 25 88 89 90 91 33 34 92
-23 21 2 1 1 15 37 16 93 94 95 96 20 19 97
-24 21 2 1 1 42 44 39 98 99 100 101 81 80 102
-25 21 2 1 1 38 43 41 103 104 105 106 74 73 107
-26 21 2 1 1 2 44 5 108 109 110 111 8 9 112
-27 21 2 1 1 10 43 4 113 114 115 116 14 13 117
-28 21 2 1 1 24 40 39 118 119 69 68 84 83 120
-29 21 2 1 1 38 40 25 64 63 121 122 91 90 123
-30 21 2 1 1 41 43 10 106 105 114 113 48 47 124
-31 21 2 1 1 5 44 42 111 110 99 98 51 50 125
-32 21 2 1 1 25 40 24 122 121 119 118 31 32 126
-33 21 2 1 1 37 41 16 76 75 56 55 96 95 127
-34 21 2 1 1 15 42 37 59 58 79 78 94 93 128
-35 21 2 1 1 4 43 26 116 115 129 130 35 36 131
-36 21 2 1 1 23 44 2 132 133 109 108 27 28 134
-37 21 2 1 1 26 43 38 130 129 104 103 89 88 135
-38 21 2 1 1 39 44 23 101 100 133 132 86 85 136
-$EndElements
-$Periodic
-1
-1 1 2
-Affine 0.5000000000000001 0.8660254037844386 0 0 -0.8660254037844386 0.5000000000000001 0 0 0 0 1 0 0 0 0 1
-3
-5 10
-1 3
-2 4
-$EndPeriodic
@@ -1,141 +0,0 @@
-// Select periodic mesh by setting this to either 0 - standard, 1 - periodic
-periodic = 1;
-
-// Set the geometry order (1, 2, ..., 10 for tetrahedra or 9 for other types)
-order = 3;
-
-// Set the element type (4 - tetrahedra, 6 - wedges, 8 - hexahedra)
-type = 8;
-
-// Minor and major radii
-R1 = 1.0;
-R2 = 2.0;
-
-// Side length of interior square
-A1 = 0.8;
-
-// Angular size of the sector
-Phi = Pi/3.0;
-
-// Number of azimuthal elements
-nazm = 3;
-
-// Number of elements around a quarter of the circle
-narc = 2;
-
-// Number of elements between surface and interior square
-nshl = 1;
-
-lc = 0.5;
-a1 = A1 / Sqrt(2.0);
-
-Point(1) = {R2+R1, 0, 0, lc};
-Point(2) = {R2, 0, R1, lc};
-Point(3) = {R2-R1, 0, 0, lc};
-Point(4) = {R2, 0, -R1, lc};
-Point(5) = {R2, 0, 0, lc};
-Point(6) = {R2+a1, 0, 0, lc};
-Point(7) = {R2, 0, a1, lc};
-Point(8) = {R2-a1, 0, 0, lc};
-Point(9) = {R2, 0, -a1, lc};
-
-Circle(1) = {1,5,2};
-Circle(2) = {2,5,3};
-Circle(3) = {3,5,4};
-Circle(4) = {4,5,1};
-
-Line(5) = {6,1};
-Line(6) = {7,2};
-Line(7) = {8,3};
-Line(8) = {9,4};
-
-Line(9) = {6, 7};
-Line(10) = {7, 8};
-Line(11) = {8, 9};
-Line(12) = {9, 6};
-
-Line Loop(101) = {1, -6, -9, 5};
-Line Loop(102) = {2, -7, -10, 6};
-Line Loop(103) = {3, -8, -11, 7};
-Line Loop(104) = {4, -5, -12, 8};
-Line Loop(105) = {9, 10, 11, 12};
-
-Plane Surface(201) = {101};
-Plane Surface(202) = {102};
-Plane Surface(203) = {103};
-Plane Surface(204) = {104};
-Plane Surface(205) = {105};
-
-Transfinite Curve{1} = narc+1;
-Transfinite Curve{2} = narc+1;
-Transfinite Curve{3} = narc+1;
-Transfinite Curve{4} = narc+1;
-
-Transfinite Curve{5} = nshl+1;
-Transfinite Curve{6} = nshl+1;
-Transfinite Curve{7} = nshl+1;
-Transfinite Curve{8} = nshl+1;
-
-Transfinite Curve{9} = narc+1;
-Transfinite Curve{10} = narc+1;
-Transfinite Curve{11} = narc+1;
-Transfinite Curve{12} = narc+1;
-
-If (type == 8)
-   Recombine Surface {201};
-   Recombine Surface {202};
-   Recombine Surface {203};
-   Recombine Surface {204};
-   Recombine Surface {205};
-
-   Transfinite Surface {201} = {1,2,7,6};
-   Transfinite Surface {202} = {2,3,8,7};
-   Transfinite Surface {203} = {3,4,9,8};
-   Transfinite Surface {204} = {4,1,6,9};
-   Transfinite Surface {205} = {6,7,8,9};
-EndIf
-
-If (type == 4)
-   Extrude { {0,0,1} , {0,0,0} , Phi} {
-      Surface{201,202,203,204,205}; Layers{nazm};
-}
-Else
-   Extrude { {0,0,1} , {0,0,0} , Phi} {
-      Surface{201,202,203,204,205}; Layers{nazm}; Recombine;
-}
-EndIf
-
-// Set a rotation periodicity constraint:
-If (periodic)
-   Periodic Surface{227} = {201} Rotate{{0,0,1}, {0,0,0}, Phi};
-   Periodic Surface{249} = {202} Rotate{{0,0,1}, {0,0,0}, Phi};
-   Periodic Surface{271} = {203} Rotate{{0,0,1}, {0,0,0}, Phi};
-   Periodic Surface{293} = {204} Rotate{{0,0,1}, {0,0,0}, Phi};
-   Periodic Surface{315} = {205} Rotate{{0,0,1}, {0,0,0}, Phi};
-EndIf
-
-// Tag surfaces and volumes with positive integers
-Physical Surface(1) = {201,202,203,204,205};
-Physical Surface(2) = {227,249,271,293,315};
-Physical Surface(3) = {214,236,258,280};
-Physical Volume(1) = {1,2,3,4,5};
-
-// Optimize the high-order mesh
-// See https://gmsh.info/doc/texinfo/gmsh.html#index-Mesh_002eHighOrderOptimize
-// Mesh.ElementOrder = order;
-// Mesh.HighOrderOptimize = 1;
-
-// Generate 3D mesh
-Mesh 3;
-SetOrder order;
-Mesh.MshFileVersion = 2.2;
-
-// Check the element quality (the Plugin may be called AnalyseCurvedMesh)
-// Plugin(AnalyseMeshQuality).JacobianDeterminant = 1;
-// Plugin(AnalyseMeshQuality).Run;
-
-If (periodic)
-   Save Sprintf("periodic-torus-sector-t%01g-o%01g.msh", type, order);
-Else
-   Save Sprintf("torus-sector-t%01g-o%01g.msh", type, order);
-EndIf
@@ -1,658 +0,0 @@
-MFEM mesh v1.0
-
-#
-# MFEM Geometry Types (see mesh/geom.hpp):
-#
-# POINT       = 0
-# SEGMENT     = 1
-# TRIANGLE    = 2
-# SQUARE      = 3
-# TETRAHEDRON = 4
-# CUBE        = 5
-# PRISM       = 6
-#
-
-dimension
-2
-
-elements
-32
-1 2 0 6 5
-1 2 6 0 1
-1 2 1 7 6
-1 2 7 1 2
-1 2 2 8 7
-1 2 8 2 3
-1 2 3 9 8
-1 2 9 3 4
-1 2 5 11 10
-1 2 11 5 6
-1 2 6 12 11
-1 2 12 6 7
-1 2 7 13 12
-1 2 13 7 8
-1 2 8 14 13
-1 2 14 8 9
-1 2 10 16 15
-1 2 16 10 11
-1 2 11 17 16
-1 2 17 11 12
-1 2 12 18 17
-1 2 18 12 13
-1 2 13 19 18
-1 2 19 13 14
-1 2 15 21 20
-1 2 21 15 16
-1 2 16 22 21
-1 2 22 16 17
-1 2 17 23 22
-1 2 23 17 18
-1 2 18 24 23
-1 2 24 18 19
-
-boundary
-16
-1 1 0 1
-1 1 1 2
-1 1 2 3
-1 1 3 4
-1 1 21 20
-1 1 22 21
-1 1 23 22
-1 1 24 23
-1 1 5 0
-1 1 10 5
-1 1 15 10
-1 1 20 15
-1 1 4 9
-1 1 9 14
-1 1 14 19
-1 1 19 24
-
-vertices
-25
-
-nodes
-FiniteElementSpace
-FiniteElementCollection: H1_2D_P4
-VDim: 2
-Ordering: 0
-
-0
-0.080037555
-0.18891599
-0.33468826
-0.5
-0
-0.068735129
-0.15432123
-0.26160657
-0.5
-0
-0.29654082
-0.30546623
-0.3058964
-0.5
-0
-0.20767624
-0.36127438
-0.44146415
-0.5
-0
-0.13483947
-0.26369712
-0.38683816
-0.5
-0.014952234
-0.041153003
-0.059682322
-0.0094260723
-0.029495442
-0.05352801
-0
-0
-0
-0.012522467
-0.037217335
-0.064269681
-0.087609647
-0.08723084
-0.076130492
-0.10350129
-0.13573231
-0.15245099
-0.08322337
-0.11165341
-0.14025324
-0.098506321
-0.13189839
-0.16793065
-0.19870689
-0.19690918
-0.17000006
-0.21946868
-0.25930152
-0.26834534
-0.16770468
-0.19757636
-0.23626491
-0.21173907
-0.25453506
-0.30293787
-0.33377239
-0.3257268
-0.29597076
-0.36376506
-0.39473641
-0.43647098
-0.28072394
-0.33792261
-0.42659702
-0.36947063
-0.42570548
-0.47596105
-0.5
-0.5
-0.5
-0.0099864538
-0.063795839
-0.20414266
-0.08893824
-0.21002116
-0.2762338
-0
-0
-0
-0.054898508
-0.10157741
-0.2284324
-0.064584618
-0.10597019
-0.23249836
-0.29981305
-0.30245895
-0.3041069
-0.11707613
-0.13803749
-0.2415601
-0.12965761
-0.15738912
-0.2354581
-0.30218595
-0.29671399
-0.29863017
-0.20412323
-0.20453954
-0.26863508
-0.22539134
-0.24787467
-0.34860698
-0.33837263
-0.4043122
-0.469932
-0.5
-0.5
-0.5
-0.11844871
-0.24101622
-0.25197733
-0.031500653
-0.10358535
-0.17066571
-0
-0
-0
-0.31794342
-0.32743739
-0.27710165
-0.33607374
-0.37471009
-0.37354724
-0.23992073
-0.29585331
-0.34187884
-0.36550349
-0.4073581
-0.387609
-0.37180134
-0.43316502
-0.44343776
-0.37758077
-0.40585611
-0.43000882
-0.3933336
-0.45407946
-0.45249351
-0.40898455
-0.47651657
-0.49206447
-0.45256956
-0.47260482
-0.49092561
-0.5
-0.5
-0.5
-0.026362903
-0.073878701
-0.11613778
-0.023122535
-0.066695566
-0.1108041
-0
-0
-0
-0.16793289
-0.14434036
-0.13987182
-0.19656602
-0.21275812
-0.24994776
-0.1578417
-0.19934979
-0.24083284
-0.32320543
-0.27914423
-0.27084466
-0.3439122
-0.33953819
-0.36877629
-0.28631832
-0.3269526
-0.36633079
-0.42319581
-0.39501579
-0.38817981
-0.43758677
-0.44675508
-0.48109078
-0.406478
-0.44380678
-0.48087362
-0.5
-0.5
-0.5
-0.016969126
-0.041983544
-0.014198448
-0.065312723
-0.035548117
-0.069355718
-0.10857895
-0.13201179
-0.095829809
-0.16607293
-0.13147499
-0.1755789
-0.22583324
-0.24098225
-0.19443999
-0.29139212
-0.24983404
-0.30111347
-0.35852094
-0.38184769
-0.3233027
-0.44295857
-0.40231794
-0.46329465
-0.022440932
-0.15935137
-0.069456975
-0.11343049
-0.023880252
-0.044943579
-0.08204175
-0.21920653
-0.21861503
-0.14933649
-0.077488899
-0.10124637
-0.13138589
-0.22210914
-0.22639497
-0.19848199
-0.14524467
-0.17849541
-0.21264375
-0.31502785
-0.2802125
-0.34654237
-0.2609936
-0.38139942
-0.11500094
-0.20970793
-0.068148195
-0.2948225
-0.21148716
-0.29602829
-0.34953362
-0.35609711
-0.31302869
-0.39332167
-0.3512777
-0.36560449
-0.41299688
-0.43208187
-0.40693217
-0.44872186
-0.38511057
-0.39496487
-0.45690758
-0.48133813
-0.46346986
-0.490474
-0.44166593
-0.48147819
-0.030282336
-0.083792186
-0.02910331
-0.11410518
-0.061710433
-0.12834537
-0.17607001
-0.21998313
-0.168306
-0.24854215
-0.22965745
-0.28950386
-0.31259845
-0.34167622
-0.29599772
-0.36840013
-0.36351431
-0.40168148
-0.42128125
-0.45466143
-0.4113499
-0.47687155
-0.45469921
-0.48567374
-1
-1
-1
-1
-1
-0.15965432
-0.32197482
-0.41918151
-0.52678756
-0.77133994
-0.40860878
-0.072728863
-0.14848828
-0.26931819
-0.7021443
-0.57766762
-0.57081481
-0.44393876
-0.36669313
-0.29774286
-1
-1
-1
-1
-1
-0.86569445
-0.63683784
-0.41390431
-0.1637733
-0.1944228
-0.25939651
-0.86922175
-0.6201834
-0.3431334
-1
-1
-1
-0.88868738
-0.67663975
-0.44834472
-0.90397029
-0.72975264
-0.54422009
-0.32327853
-0.35864361
-0.40291224
-1
-1
-1
-0.91491529
-0.74947265
-0.55773662
-0.91593956
-0.7515123
-0.60003971
-0.43409189
-0.46919283
-0.50807492
-1
-1
-1
-0.94329396
-0.81124577
-0.63976678
-0.94400926
-0.80597931
-0.72924317
-0.53646582
-0.59031025
-0.68652559
-1
-1
-1
-0.93104934
-0.84569627
-0.79296547
-0.041999904
-0.29850158
-0.30729195
-0.45728782
-0.35764094
-0.16913525
-0.061137722
-0.29127294
-0.38099644
-0.088384262
-0.25650801
-0.24561704
-0.16435602
-0.15009489
-0.11237637
-0.025288955
-0.048972923
-0.11406787
-0.21720563
-0.08488915
-0.066506492
-0.24209903
-0.043575157
-0.086589095
-0.16153884
-0.18523687
-0.22932127
-0.38122961
-0.16461293
-0.19243227
-0.41865735
-0.34156248
-0.48356303
-0.37201441
-0.53268808
-0.65308607
-0.75430416
-0.73023922
-0.71120622
-0.47884311
-0.4178142
-0.49072846
-0.58725278
-0.59584798
-0.58239064
-0.4234016
-0.46095327
-0.52171434
-0.070761641
-0.22139345
-0.4728164
-0.0061031166
-0.08139472
-0.31389427
-0.56360444
-0.52568701
-0.47004678
-0.24367032
-0.046748649
-0.29680271
-0.28444339
-0.1549505
-0.19113109
-0.43088152
-0.39665287
-0.37100684
-0.44177181
-0.25461873
-0.18475263
-0.48136759
-0.29140221
-0.1123432
-0.37161554
-0.35259093
-0.32059835
-0.61384042
-0.31147032
-0.090567115
-0.65220034
-0.78355045
-0.92418305
-1
-1
-1
-0.64832621
-0.78550418
-0.92400425
-0.63797415
-0.77596776
-0.92314707
-0.63104533
-0.7660646
-0.91965726
-1
-1
-1
-0.57545921
-0.75383088
-0.9173847
-0.55774932
-0.7380311
-0.90968212
-1
-1
-1
-0.51253666
-0.7278085
-0.90770935
-0.50727947
-0.72218234
-0.90535401
-1
-1
-1
-0.48486496
-0.73073829
-0.90287375
-0.6962467
-0.40228898
-0.37574172
-0.58649911
-0.84441703
-0.85738994
-0.75308434
-0.5319245
-0.48294944
-0.68520148
-0.88206789
-0.89093514
-0.79488362
-0.60754966
-0.58805034
-0.73294422
-0.90141216
-0.91752348
-0.85154118
-0.69385203
-0.65973283
-0.78922213
-0.92138639
-0.91934097
-0.24934006
-0.37486984
-0.4198655
-0.31832202
-0.045830659
-0.0077671847
-0.13803158
-0.16930028
-0.22884866
-0.15849229
-0.12626684
-0.15760342
-0.027255655
-0.016529794
-0.056743578
-0.083681581
-0.24140643
-0.31096294
-0.26404238
-0.40050205
-0.2660714
-0.50456441
-0.44620407
-0.60109934
-0.50320805
-0.51265344
-0.55244235
-0.34530401
-0.40091936
-0.18310352
-0.093141548
-0.32926871
-0.41233045
-0.09370592
-0.080921737
-0.19241964
-0.18262835
-0.17261584
-0.23021507
-0.10375706
-0.33420072
-0.40930232
-0.37227789
-0.095851556
-0.13123474
-0.20809881
-0.52360734
-0.57587426
-0.74756029
-0.90938574
-0.90980172
-0.81942673
-0.65843419
-0.662674
-0.7329696
-0.9039993
-0.90589299
-0.80179047
-0.64060982
-0.61482888
-0.69893809
-0.89438167
-0.89767922
-0.78163371
-0.56765352
-0.5444136
-0.66910116
-0.88940521
-0.89031668
-0.77444781
-0.538213
-0.52498697
@@ -1,155 +0,0 @@
-MFEM NURBS mesh v1.0
-
-dimension
-2
-
-elements
-5
-1 3 0 3 7 4
-1 3 3 2 6 7
-1 3 2 1 5 6
-1 3 1 0 4 5
-1 3 2 8 9 1
-
-boundary
-10
-1 1 0 3
-2 1 3 2
-2 1 1 0
-2 1 2 8
-2 1 9 1
-3 1 7 4
-3 1 6 7
-3 1 5 6
-3 1 4 5
-4 1 8 9
-
-edges
-15
-0 0 4
-0 3 7
-0 1 5
-0 2 6
-1 0 3
-1 4 7
-2 3 2
-2 7 6
-2 1 0
-2 5 4
-1 2 1
-1 6 5
-1 8 9
-3 2 8
-3 1 9
-
-vertices
-10
-
-patches
-
-knotvectors
-2
-2 3 0 0 0 1 1 1
-2 4 0 0 0 0.5 1 1 1
-
-dimension
-2
-
-controlpoints_cartesian
-5 5 1
-5 3.92523e-16 1
-5 -5 1
-2.47593 2.47593 1
-4.95187 6.06429e-16 0.707107
-2.47593 -2.47593 1
-0.424264 0.424264 1
-0.848528 1.03915e-16 0.707107
-0.424264 -0.424264 1
-0.353553 0.353553 1
-0.707107 8.65956e-17 0.707107
-0.353553 -0.353553 1
-
-knotvectors
-2
-2 3 0 0 0 1 1 1
-2 4 0 0 0 0.5 1 1 1
-
-dimension
-2
-
-controlpoints_cartesian
-5 -5 1
-1.17757e-15 -5 1
-5 -5 1
-2.47593 -2.47593 1
-9.09644e-16 -4.95187 0.707107
-2.47593 -2.47593 1
-0.424264 -0.424264 1
-1.55872e-16 -0.848528 0.707107
-0.424264 -0.424264 1
-0.353553 -0.353553 1
-1.29893e-16 -0.707107 0.707107
-0.353553 -0.353553 1
-
-knotvectors
-2
-2 3 0 0 0 1 1 1
-2 4 0 0 0 0.5 1 1 1
-
-dimension
-2
-
-controlpoints_cartesian
-5 -5 1
-5 -1.17757e-15 1
-5 5 1
-2.47593 -2.47593 1
-4.95187 -1.21286e-15 0.707107
-2.47593 2.47593 1
-0.424264 -0.424264 1
-0.848528 -2.07829e-16 0.707107
-0.424264 0.424264 1
-0.353553 -0.353553 1
-0.707107 -1.73191e-16 0.707107
-0.353553 0.353553 1
-
-knotvectors
-2
-2 3 0 0 0 1 1 1
-2 4 0 0 0 0.5 1 1 1
-
-dimension
-2
-
-controlpoints_cartesian
-5 5 1
-3.92523e-16 5 1
-5 5 1
-2.47593 2.47593 1
-3.03215e-16 4.95187 0.707107
-2.47593 2.47593 1
-0.424264 0.424264 1
-5.19574e-17 0.848528 0.707107
-0.424264 0.424264 1
-0.353553 0.353553 1
-4.32978e-17 0.707107 0.707107
-0.353553 0.353553 1
-
-knotvectors
-2
-2 3 0 0 0 1 1 1
-2 3 0 0 0 1 1 1
-
-dimension
-2
-
-controlpoints_cartesian
-5 -5 1
-10 -5 1
-15 -5 1
-5 0 1
-10 0 1
-15 0 1
-5 5 1
-10 5 1
-15 5 1
@@ -1,118 +0,0 @@
-MFEM mesh v1.0
-
-#
-# MFEM Geometry Types (see mesh/geom.hpp):
-#
-# POINT       = 0
-# SEGMENT     = 1
-# TRIANGLE    = 2
-# SQUARE      = 3
-# TETRAHEDRON = 4
-# CUBE        = 5
-# PRISM       = 6
-#
-
-dimension
-2
-
-elements
-20
-1 3 0 1 6 5
-1 3 1 2 7 6
-1 3 2 3 8 7
-1 3 3 4 9 8
-1 3 5 6 11 10
-1 2 6 7 11
-1 2 7 12 11
-1 2 7 8 13
-1 2 7 13 12
-1 3 8 9 14 13
-1 3 10 11 16 15
-1 2 11 12 17
-1 2 11 17 16
-1 2 12 13 17
-1 2 13 18 17
-1 3 13 14 19 18
-1 3 15 16 21 20
-1 3 16 17 22 21
-1 3 17 18 23 22
-1 3 18 19 24 23
-
-boundary
-16
-2 1 0 1
-2 1 1 2
-2 1 2 3
-2 1 3 4
-2 1 21 20
-2 1 22 21
-2 1 23 22
-2 1 24 23
-1 1 5 0
-1 1 10 5
-1 1 15 10
-1 1 20 15
-1 1 4 9
-1 1 9 14
-1 1 14 19
-1 1 19 24
-
-vertices
-25
-
-nodes
-FiniteElementSpace
-FiniteElementCollection: H1_2D_P1
-VDim: 2
-Ordering: 0
-
-0
-0.25
-0.5
-0.75
-1
-0
-0.25
-0.5
-0.75
-1
-0
-0.25
-0.5
-0.75
-1
-0
-0.25
-0.5
-0.75
-1
-0
-0.25
-0.5
-0.75
-1
-0
-0
-0
-0
-0
-0.25
-0.25
-0.25
-0.25
-0.25
-0.5
-0.5
-0.5
-0.5
-0.5
-0.75
-0.75
-0.75
-0.75
-0.75
-1
-1
-1
-1
-1
@@ -1,13 +1,13 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

 find_package(Doxygen)

@@ -16,19 +16,36 @@ if (DOXYGEN_FOUND)
  configure_file(${CMAKE_CURRENT_SOURCE_DIR}/CodeDocumentation.conf.in
    ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.conf @ONLY)

-  add_custom_target(doc
-    COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.conf
-    COMMAND echo "<meta http-equiv=\"REFRESH\" content=\"0;URL=CodeDocumentation/html/index.html\">" > ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.html
-    BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation/html/index.html
-    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-    COMMENT "Generating API documentation with Doxygen to CodeDocumentation.html"
-    VERBATIM)
+  if (UNIX)
+    # Only create symlinks if UNIX operating system
+    add_custom_target(doc
+      COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.conf
+      COMMAND ${CMAKE_COMMAND} -E remove -f ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.html
+      COMMAND ${CMAKE_COMMAND} -E create_symlink
+      ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation/html/index.html
+      ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.html
+      BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation/html/index.html
+      WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+      COMMENT "Generating API documentation with Doxygen to CodeDocumentation.html"
+      VERBATIM)

-  add_custom_target(clean-doc
-    COMMAND ${CMAKE_COMMAND} -E remove -f ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.html
-    COMMAND ${CMAKE_COMMAND} -E remove -f ${CMAKE_CURRENT_BINARY_DIR}/warnings.log
-    COMMAND ${CMAKE_COMMAND} -E remove_directory ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation
-    COMMENT "Removing API documentation"
-    VERBATIM)
+    add_custom_target(clean-doc
+      COMMAND ${CMAKE_COMMAND} -E remove -f ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.html
+      COMMAND ${CMAKE_COMMAND} -E remove_directory ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation
+      COMMENT "Removing API documentation"
+      VERBATIM)

+  else (UNIX)
+    add_custom_target(doc
+      COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation.conf
+      BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation/html/index.html
+      WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+      COMMENT "Generating API documentation with Doxygen to CodeDocumentation/html/index.html"
+      VERBATIM)
+
+    add_custom_target(clean-doc
+      COMMAND ${CMAKE_COMMAND} -E remove_directory ${CMAKE_CURRENT_BINARY_DIR}/CodeDocumentation
+      COMMENT "Removing API documentation"
+      VERBATIM)
+  endif (UNIX)
 endif (DOXYGEN_FOUND)
@@ -38,7 +38,7 @@ PROJECT_NAME           = "MFEM"
 # could be handy for archiving the generated documentation or if some version
 # control system is used.

-PROJECT_NUMBER         = v4.2.1
+PROJECT_NUMBER         = v4.0.1

 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
@@ -51,7 +51,7 @@ PROJECT_BRIEF          = "Finite element discretization library"
 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
 # the logo to the output directory.

-PROJECT_LOGO           = logo-small.png
+PROJECT_LOGO           =

 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is
@@ -746,7 +746,7 @@ WARN_FORMAT            = "$file:$line: $text"
 # messages should be written. If left blank the output is written to standard
 # error (stderr).

-WARN_LOGFILE           = warnings.log
+WARN_LOGFILE           =

 #---------------------------------------------------------------------------
 # Configuration options related to the input files
@@ -766,23 +766,15 @@ INPUT                  = @MFEM_SOURCE_DIR@/doc/CodeDocumentation.dox \
                         @MFEM_SOURCE_DIR@/mesh \
                         @MFEM_SOURCE_DIR@/fem \
                         @MFEM_SOURCE_DIR@/examples \
-                         @MFEM_SOURCE_DIR@/examples/amgx \
-                         @MFEM_SOURCE_DIR@/examples/ginkgo \
-                         @MFEM_SOURCE_DIR@/examples/hiop \
                         @MFEM_SOURCE_DIR@/examples/petsc \
                         @MFEM_SOURCE_DIR@/examples/pumi \
                         @MFEM_SOURCE_DIR@/examples/sundials \
-                         @MFEM_SOURCE_DIR@/examples/superlu \
-                         @MFEM_SOURCE_DIR@/miniapps/adjoint \
                         @MFEM_SOURCE_DIR@/miniapps/common \
-                         @MFEM_SOURCE_DIR@/miniapps/electromagnetics \
-                         @MFEM_SOURCE_DIR@/miniapps/gslib \
                         @MFEM_SOURCE_DIR@/miniapps/meshing \
-                         @MFEM_SOURCE_DIR@/miniapps/navier \
-                         @MFEM_SOURCE_DIR@/miniapps/nurbs \
-                         @MFEM_SOURCE_DIR@/miniapps/performance \
                         @MFEM_SOURCE_DIR@/miniapps/tools \
-                         @MFEM_SOURCE_DIR@/miniapps/toys
+                         @MFEM_SOURCE_DIR@/miniapps/nurbs \
+                         @MFEM_SOURCE_DIR@/miniapps/electromagnetics \
+                         @MFEM_SOURCE_DIR@/miniapps/performance

 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
@@ -846,7 +838,7 @@ EXCLUDE_PATTERNS       =
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories use the pattern */test/*

-EXCLUDE_SYMBOLS        = mfem::internal mfem::kernels::internal
+EXCLUDE_SYMBOLS        = mfem::internal

 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
 # that contain example code fragments that are included (see the \include
@@ -1474,7 +1466,7 @@ MATHJAX_FORMAT         = HTML-CSS
 # The default value is: http://cdn.mathjax.org/mathjax/latest.
 # This tag requires that the tag USE_MATHJAX is set to YES.

-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = https://cdn.llnl.gov/mathjax/2.7.2

 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
@@ -2337,7 +2329,7 @@ PLANTUML_INCLUDE_PATH  =
 # Minimum value: 0, maximum value: 10000, default value: 50.
 # This tag requires that the tag HAVE_DOT is set to YES.

-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 10

 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
 # generated by dot. A depth value of 3 means that only nodes reachable from the
@@ -62,7 +62,7 @@ namespace mfem {
 * - <a class="el" href="ex9p_8cpp_source.html">Example 9p</a>: parallel Discontinuous Galerkin (DG) time-dependent advection
 * - <a class="el" href="ex10_8cpp_source.html">Example 10</a>: time-dependent implicit nonlinear elasticity
 * - <a class="el" href="ex10p_8cpp_source.html">Example 10p</a>: parallel time-dependent implicit nonlinear elasticity
- * - <a class="el" href="ex11p_8cpp_source.html">Example 11p</a>: parallel Laplace eigensolver
+ * - <a class="el" href="examples_2ex11p_8cpp_source.html">Example 11p</a>: parallel Laplace eigensolver
 * - <a class="el" href="ex12p_8cpp_source.html">Example 12p</a>: parallel linear elasticity eigensolver
 * - <a class="el" href="ex13p_8cpp_source.html">Example 13p</a>: parallel Maxwell eigensolver
 * - <a class="el" href="ex14_8cpp_source.html">Example 14</a>: Discontinuous Galerkin (DG) for the Laplace problem
@@ -81,34 +81,17 @@ namespace mfem {
 * - <a class="el" href="ex20p_8cpp_source.html">Example 20p</a>: parallel symplectic ODE integration
 * - <a class="el" href="ex21_8cpp_source.html">Example 21</a>: adaptive mesh refinement for linear elasticity
 * - <a class="el" href="ex21p_8cpp_source.html">Example 21p</a>: parallel adaptive mesh refinement for linear elasticity
- * - <a class="el" href="ex22_8cpp_source.html">Example 22</a>: complex-valued linear systems for damped harmonic oscillators
- * - <a class="el" href="ex22p_8cpp_source.html">Example 22p</a>: parallel complex-valued linear systems for damped harmonic oscillators
- * - <a class="el" href="ex23_8cpp_source.html">Example 23</a>: second order in time wave equation
- * - <a class="el" href="ex24_8cpp_source.html">Example 24</a>: mixed finite element spaces and interpolators
- * - <a class="el" href="ex24p_8cpp_source.html">Example 24p</a>: parallel mixed finite element spaces and interpolators
- * - <a class="el" href="ex25_8cpp_source.html">Example 25</a>: simulation of electromagnetic wave propagation using a Perfectly Matched Layer (PML)
- * - <a class="el" href="ex25p_8cpp_source.html">Example 25p</a>: parallel simulation of electromagnetic wave propagation using a Perfectly Matched Layer (PML)
- * - <a class="el" href="ex26_8cpp_source.html">Example 26</a>: multigrid preconditioner for the Laplace problem using nodal H1 FEM
- * - <a class="el" href="ex26p_8cpp_source.html">Example 26p</a>: parallel multigrid preconditioner for the Laplace problem using nodal H1 FEM
- * - <a class="el" href="ex27_8cpp_source.html">Example 27</a>: boundary conditions for the Laplace problem
- * - <a class="el" href="ex27p_8cpp_source.html">Example 27p</a>: parallel boundary conditions for the Laplace problem
 *
- * <H4>AmgX Examples</H4>
+ * <H4>SUNDIALS Examples</H4>
 * - Variants of Examples
- *   <a class="el" href="examples_2amgx_2ex1_8cpp_source.html">1</a> and
- *   <a class="el" href="examples_2amgx_2ex1p_8cpp_source.html">1p</a>,
- *   demonstrating the use of MFEM's \link amgxsolver.hpp AmgX integration\endlink.
- *
- * <H4>Ginkgo Examples</H4>
- * - Variants of Example
- *   <a class="el" href="examples_2ginkgo_2ex1_8cpp_source.html">1</a>,
- *   demonstrating the use of MFEM's \link ginkgo.hpp Ginkgo integration\endlink.
- *
- * <H4>HiOp Examples</H4>
- * - Variants of Examples
- *   <a class="el" href="hiop_2ex9_8cpp_source.html">9</a> and
- *   <a class="el" href="hiop_2ex9p_8cpp_source.html">9p</a>,
- *   demonstrating the use of MFEM's \link hiop.hpp HiOp integration\endlink.
+ *   <a class="el" href="sundials_2ex9_8cpp_source.html">9</a>,
+ *   <a class="el" href="sundials_2ex9p_8cpp_source.html">9p</a>,
+ *   <a class="el" href="sundials_2ex10_8cpp_source.html">10</a>,
+ *   <a class="el" href="sundials_2ex10p_8cpp_source.html">10p</a>,
+ *   <a class="el" href="sundials_2ex16_8cpp_source.html">16</a>,
+ *   and
+ *   <a class="el" href="sundials_2ex16p_8cpp_source.html">16p</a>
+ *   demonstrating the use of MFEM's \link sundials.hpp SUNDIALS classes\endlink
 *
 * <H4>PETSc Examples</H4>
 * - Variants of Examples
@@ -120,8 +103,8 @@ namespace mfem {
 *   <a class="el" href="petsc_2ex6p_8cpp_source.html">6p</a>,
 *   <a class="el" href="petsc_2ex9p_8cpp_source.html">9p</a>,
 *   and
- *   <a class="el" href="petsc_2ex10p_8cpp_source.html">10p</a>,
- *   demonstrating the use of MFEM's \link petsc.hpp PETSc integration\endlink.
+ *   <a class="el" href="petsc_2ex10p_8cpp_source.html">10p</a>
+ *   demonstrating the use of MFEM's \link petsc.hpp PETSc classes\endlink
 *
 * <H4>PUMI Examples</H4>
 * - Variants of Examples
@@ -129,57 +112,29 @@ namespace mfem {
 *   <a class="el" href="examples_2pumi_2ex1p_8cpp_source.html">1p</a>,
 *   <a class="el" href="pumi_2ex2_8cpp_source.html">2</a>,
 *   and
- *   <a class="el" href="pumi_2ex6p_8cpp_source.html">6p</a>,
- *   demonstrating the use of MFEM's \link pumi.hpp PUMI integration\endlink.
- *
- * <H4>SUNDIALS Examples</H4>
- * - Variants of Examples
- *   <a class="el" href="sundials_2ex9_8cpp_source.html">9</a>,
- *   <a class="el" href="sundials_2ex9p_8cpp_source.html">9p</a>,
- *   <a class="el" href="sundials_2ex10_8cpp_source.html">10</a>,
- *   <a class="el" href="sundials_2ex10p_8cpp_source.html">10p</a>,
- *   <a class="el" href="sundials_2ex16_8cpp_source.html">16</a>,
- *   and
- *   <a class="el" href="sundials_2ex16p_8cpp_source.html">16p</a>,
- *   demonstrating the use of MFEM's \link sundials.hpp SUNDIALS integration\endlink.
- * - CVODES adjoint miniapps:
- *   <a class="el" href="cvsRoberts__ASAi__dns_8cpp_source.html">serial ODE system</a>,
- *   <a class="el" href="adjoint__advection__diffusion_8cpp_source.html">parallel advection-diffusion</a>.
- *
- * <H4>SuperLU Examples</H4>
- * - Variants of Example
- *   <a class="el" href="examples_2superlu_2ex1p_8cpp_source.html">1p</a>,
- *   demonstrating the use of MFEM's \link superlu.hpp SuperLU integration\endlink.
+ *   <a class="el" href="pumi_2ex6p_8cpp_source.html">6p</a>
+ *   demonstrating the use of MFEM's \link pumi.hpp PUMI classes\endlink
 *
 * <H3>Miniapps</H3>
 * - <a class="el" href="volta_8cpp_source.html">Volta</a>: simple electrostatics simulation code
 * - <a class="el" href="tesla_8cpp_source.html">Tesla</a>: simple magnetostatics simulation code
 * - <a class="el" href="maxwell_8cpp_source.html">Maxwell</a>: simple transient full-wave electromagnetics simulation code
 * - <a class="el" href="joule_8cpp_source.html">Joule</a>: transient magnetics and Joule heating miniapp
- * - <a class="el" href="classmfem_1_1navier_1_1NavierSolver.html">Navier</a>: solve the transient incompressible Navier-Stokes equations
 * - <a class="el" href="mobius-strip_8cpp_source.html">Mobius Strip</a>: generate various Mobius strip-like meshes
 * - <a class="el" href="klein-bottle_8cpp_source.html">Klein Bottle</a>: generate three types of Klein bottle surfaces
 * - <a class="el" href="toroid_8cpp_source.html">Toroid</a>: generate simple toroidal meshes
- * - <a class="el" href="twist_8cpp_source.html">Twist</a>: generate simple periodic meshes
- * - <a class="el" href="minimal-surface_8cpp_source.html">Minimal Surface</a>: compute minimal surfaces, <a class="el" href="minimal-surface_8cpp_source.html">serial</a> and <a class="el" href="pminimal-surface_8cpp_source.html">parallel</a> versions
- * - <a class="el" href="polar-nc_8cpp_source.html">Polar NC</a>: generate polar non-conforming meshes
 * - <a class="el" href="shaper_8cpp_source.html">Shaper</a>: resolve material interfaces by mesh refinement
 * - <a class="el" href="extruder_8cpp_source.html">Extruder</a>: extrude a low-dimensional mesh into a higher dimension
 * - <a class="el" href="mesh-explorer_8cpp_source.html">Mesh Explorer</a>: visualize and manipulate meshes
 * - <a class="el" href="mesh-optimizer_8cpp_source.html">Mesh Optimizer</a>: optimize high-order meshes, <a class="el" href="mesh-optimizer_8cpp_source.html">serial</a> and <a class="el" href="pmesh-optimizer_8cpp_source.html">parallel</a> versions
- * - <a class="el" href="trimmer_8cpp_source.html">Trimmer</a>: trim elements from existing meshes
 * - <a class="el" href="display-basis_8cpp_source.html">Display Basis</a>: visualize finite element basis functions
- * - <a class="el" href="get-values_8cpp_source.html">Get Values</a>: extract field values via DataCollection classes
 * - <a class="el" href="load-dc_8cpp_source.html">Load DC</a>: visualize fields saved via DataCollection classes
- * - <a class="el" href="convert-dc_8cpp_source.html">Convert DC</a>: convert between different DataCollection formats
+ * - <a class="el" href="convert-dc_8cpp_source.html">Convert DC</a>: convert between diffirent DataCollection formats
 * - <a class="el" href="lor-transfer_8cpp_source.html">LOR Transfer</a>: map functions between high-order and low-order refined spaces
- * - <a class="el" href="findpts_8cpp_source.html">Find Points</a>: evaluate grid function in physical space, <a class="el" href="findpts_8cpp_source.html">serial</a> and <a class="el" href="pfindpts_8cpp_source.html">parallel</a> versions
- * - <a class="el" href="field-diff_8cpp_source.html">Field Diff</a>: compare grid functions on different meshes
- * - <a class="el" href="field-interp_8cpp_source.html">Field Interp</a>: transfer a grid functions between meshes
 * - <a class="el" href="miniapps_2performance_2ex1_8cpp_source.html">HPC Example 1</a>: high-performance nodal H1 FEM for the Laplace problem
 * - <a class="el" href="miniapps_2performance_2ex1p_8cpp_source.html">HPC Example 1p</a>: high-performance parallel nodal H1 FEM for the Laplace problem
 *
- * See also the <a class="el" href="https://mfem.org/examples/">examples documentation</a> online.
+ * See also the <a class="el" href="../../../examples/README.html">README</a> in the <code>examples/</code> directory
 */

 }
@@ -5,7 +5,7 @@
                      | | | | | ||  _||  __/| | | | | |
                      |_| |_| |_||_|   \___||_| |_| |_|

-                               https://mfem.org
+                               http://mfem.org

 This directory contains Doxygen configuration files for building HTML
 documentation of the MFEM sources (including the example codes and miniapps).
@@ -21,7 +21,7 @@ create the file CodeDocumentation.html, which can be viewed in any web browser.

 Alternatively, the (pre-build) documentation can be browsed directly online at

-   https://mfem.github.io/doxygen/html/index.html
+   http://mfem.github.io/doxygen/html/index.html


 Some building considerations:
@@ -1,32 +1,26 @@
-# Copyright (c) 2010-2020, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
+# Copyright (c) 2010, Lawrence Livermore National Security, LLC. Produced at the
+# Lawrence Livermore National Laboratory. LLNL-CODE-443211. All Rights reserved.
+# See file COPYRIGHT for details.
 #
 # This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
+# availability see http://mfem.org.
 #
 # MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
+# terms of the GNU Lesser General Public License (as published by the Free
+# Software Foundation) version 2.1 dated February 1999.

-SHELL = /bin/bash
 MFEM_DIR ?= ..
 DOXYGEN_CONF = CodeDocumentation.conf

 # doxygen uses: graphviz, latex
 html: $(DOXYGEN_CONF)
-	@# Generate the html documentation
-	@doxygen $(DOXYGEN_CONF)
-	@echo "<meta http-equiv=\"REFRESH\" content=\"0;URL=CodeDocumentation/html/index.html\">" > CodeDocumentation.html
-	@cat warnings.log 1>&2
-	@# Generate the log of undocumented methods
-	@( cat $(DOXYGEN_CONF) ; echo "GENERATE_HTML=NO" ; echo "EXTRACT_ALL=NO" ; echo "WARN_LOGFILE=undoc.log" ; echo "QUIET=YES" ) | doxygen - &> /dev/null
+	doxygen $(DOXYGEN_CONF)
+	rm -f CodeDocumentation.html
+	ln -s CodeDocumentation/html/index.html CodeDocumentation.html

 clean:
 	rm -rf $(DOXYGEN_CONF) CodeDocumentation CodeDocumentation.html *~
-	rm -rf  undoc.log warnings.log

 $(DOXYGEN_CONF): $(MFEM_DIR)/doc/$(DOXYGEN_CONF).in
-	@sed -e 's%@MFEM_SOURCE_DIR@%$(MFEM_DIR)%g' $(<) \
+	sed -e 's%@MFEM_SOURCE_DIR@%$(MFEM_DIR)%g' $(<) \
 	  > $(DOXYGEN_CONF)
-
@@ -0,0 +1,208 @@
+body {
+    padding-top: 70px;
+}
+
+/* hack to increase height of headers to make #anchors work with the top nav-bar,
+   (note: we only want this on pages with TOC, otherwise there are other problems) */
+div.col-md-9 h1[id]::before,
+div.col-md-9 h2[id]::before,
+div.col-md-9 h3[id]::before,
+div.col-md-9 h4[id]::before,
+div.col-md-9 h5[id]::before,
+div.col-md-9 h6[id]::before {
+    content: "";
+    display: block;
+    margin-top: -75px;
+    height: 75px;
+}
+
+img {
+    max-width: 100%;
+    height: auto;
+}
+
+pre {
+    overflow-x: auto;
+}
+
+pre code {
+    overflow-wrap: normal;
+    white-space: pre;
+    font-size: 13.5px;
+}
+
+label {
+    font-weight: normal;
+}
+
+ul.nav li.main {
+    font-weight: bold;
+}
+
+div.col-md-3 {
+    padding-right: 0;
+}
+
+div.col-md-9, div.col-md-12 {
+    padding-bottom: 100px;
+}
+
+div.source-links {
+    float: right;
+}
+
+img {
+    display: block;
+    margin-left: auto;
+    margin-right: auto;
+    margin-top: 25px;
+    margin-bottom: 25px;
+}
+
+img.floatright {
+    display: block;
+    float: right;
+    margin-top: 0;
+    margin-left: 25px;
+    margin-bottom: 25px;
+}
+
+img.teamphoto {
+    box-shadow: 4px 4px 4px #999;
+}
+
+p.centered {
+    margin-left: auto;
+    margin-right: auto;
+    text-align: center;
+}
+
+/*label {
+    display: inline-block;
+    margin-bottom: 5px;
+    font-weight: normal;
+}*/
+
+/*
+ * Side navigation
+ *
+ * Scrollspy and affixed enhanced navigation to highlight sections and secondary
+ * sections of docs content.
+ */
+
+/* By default it's not affixed in mobile views, so undo that */
+.bs-sidebar.affix {
+    position: static;
+}
+
+.bs-sidebar.well {
+    padding: 0;
+}
+
+/* First level of nav */
+.bs-sidenav {
+    /*margin-top: 10px;
+    margin-bottom: 10px;*/
+    padding-top:    10px;
+    padding-bottom: 10px;
+    border-radius: 5px;
+}
+
+/* All levels of nav */
+.bs-sidebar .nav > li > a {
+    display: block;
+    padding: 5px 20px;
+    z-index: 1;
+}
+.bs-sidebar .nav > li > a:hover,
+.bs-sidebar .nav > li > a:focus {
+    text-decoration: none;
+    border-right: 1px solid;
+}
+.bs-sidebar .nav > .active > a,
+.bs-sidebar .nav > .active:hover > a,
+.bs-sidebar .nav > .active:focus > a {
+    font-weight: bold;
+    background-color: transparent;
+    border-right: 1px solid;
+}
+
+/* Nav: second level (shown on .active) */
+.bs-sidebar .nav .nav {
+    display: none; /* Hide by default, but at >768px, show it */
+    margin-bottom: 8px;
+}
+.bs-sidebar .nav .nav > li > a {
+    padding-top:    3px;
+    padding-bottom: 3px;
+    padding-left: 30px;
+    font-size: 90%;
+}
+
+/* Show and affix the side nav when space allows it */
+@media (min-width: 992px) {
+    .bs-sidebar .nav > .active > ul {
+        display: block;
+    }
+    /* Widen the fixed sidebar */
+    .bs-sidebar.affix,
+    .bs-sidebar.affix-bottom {
+        width: 213px;
+    }
+    .bs-sidebar.affix {
+        position: fixed; /* Undo the static from mobile first approach */
+        top: 80px;
+    }
+    .bs-sidebar.affix-bottom {
+        position: absolute; /* Undo the static from mobile first approach */
+    }
+    .bs-sidebar.affix-bottom .bs-sidenav,
+    .bs-sidebar.affix .bs-sidenav {
+        margin-top: 0;
+        margin-bottom: 0;
+    }
+}
+@media (min-width: 1200px) {
+    /* Widen the fixed sidebar again */
+    .bs-sidebar.affix-bottom,
+    .bs-sidebar.affix {
+        width: 263px;
+    }
+}
+
+
+/* Sticky footer styles
+-------------------------------------------------- */
+html {
+  position: relative;
+  min-height: 100%;
+}
+body {
+  /* Margin bottom by footer height */
+  margin-bottom: 50px;
+}
+.footer {
+  position: absolute;
+  bottom: 0;
+  width: 100%;
+  /* Set the fixed height of the footer here */
+  height: 50px;
+  background-color: #eeeeee;
+  overflow: hidden;
+}
+
+
+/* Custom page CSS
+-------------------------------------------------- */
+/* Not required for template or sticky footer method. */
+
+.container .text-muted {
+  margin-top: 17px;
+  margin-bottom: 0;
+}
+.container .alignleft {
+  float: left;
+}
+.container .alignright {
+  float: right;
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Jason Hicken	a67cf7bff6	fixed euclid issue	2020-02-26 14:15:38 -05:00
Jason Hicken	858e47628f	Merge branch 'master' into functional-dev	2019-12-19 15:08:07 -05:00
Jason Hicken	d9e78bae82	removed Functional alias to CalcEnergy, and removed comment about prolongate	2019-08-30 15:27:32 -04:00
Jason Hicken	ecfe5a98c7	added face and boundary terms to GetEnergy	2019-08-22 15:46:01 -04:00