Try the 'lgtm' CodeQL queries

Try the 'security-and-quality' CodeQL queries
Try the 'security-extended' CodeQL queries
2022-08-25 15:25:59 -07:00 · 2022-08-25 12:30:23 -07:00 · 2022-08-25 10:13:22 -07:00 · 2022-08-24 17:11:03 -07:00 · 2022-08-24 17:07:14 -07:00 · 2022-08-23 13:18:50 -07:00
1184 changed files with 46139 additions and 142935 deletions
@@ -23,15 +23,16 @@ install:
 - set MSMPI_LIB64=C:\Program Files (x86)\Microsoft SDKs\MPI\Lib\x64
 - set MSMPI_INC=C:\Program Files (x86)\Microsoft SDKs\MPI\Include

-# Install METIS, use MFEM's mirror because the original source server is often
-# down and we don't support yet the new repo https://github.com/KarypisLab/METIS
+# Install METIS, use a mirror because the original source server is not always
+# up. Original url:
+#    http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/metis-5.1.0.tar.gz
 - ps: Start-FileDownload 'https://mfem.github.io/tpls/metis-5.1.0.tar.gz'
 - 7z x metis-5.1.0.tar.gz -so | 7z x -si -ttar > nul
 - cd metis-5.1.0
 - ps: ( get-content "GKlib\gk_arch.h") | % { If ($_.ReadCount -ge 52) {$_ -replace "#ifdef __MSC__","#ifdef DISABLE_THIS_ANCIENT_MSC_CHECK"} Else {$_} } | set-content "GKlib\gk_arch.h"
 - cmake -H. -Bbuild
 # -DCMAKE_BUILD_TYPE=Release
- cmake --build build --target metis -j 4
+- cmake --build build
 - set METIS_PATH=%cd%
 - cd ..

@@ -40,7 +41,7 @@ install:
 - 7z x v2.19.0.tar.gz -so | 7z x -si -ttar > nul
 - cd hypre-2.19.0/src
 - cmake -H. -Bbuild
- cmake --build build -j 4
+- cmake --build build
 - cmake --build build --target install
 - cd ../..

@@ -49,20 +50,14 @@ install:

 # MFEM
 before_build:
- cmake . -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DHYPRE_DIR=%cd%\..\hypre-2.19.0\src\hypre -DMETIS_LIBRARIES=%METIS_PATH%\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%METIS_PATH%\include
-# - cmake . -Bbuild_serial -DMFEM_USE_MPI=FALSE
- cmake . -Bbuild_shared_serial -DMFEM_USE_MPI=FALSE -DBUILD_SHARED_LIBS=ON
+- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DHYPRE_DIR=%cd%\..\hypre-2.19.0\src\hypre -DMETIS_LIBRARIES=%METIS_PATH%\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%METIS_PATH%\include
+- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_serial -DMFEM_USE_MPI=FALSE

 build_script:
- cmake --build build_parallel --config Debug -j 4
-# - cmake --build build_serial --config Release -j 4
-# - cmake --build build_serial --target exec --config Release -j 4
- cmake --build build_shared_serial --config Release -j 4
- cmake --build build_shared_serial --target exec --config Release -j 4
+- cmake --build build_parallel --config Release -j 4
+- cmake --build build_serial --config Release -j 4
+- cmake --build build_serial --target exec --config Release -j 4

 after_build:
-# - cd build_serial
-# - ctest -C Release --output-on-failure
-# - cd ..
- cd build_shared_serial
+- cd build_serial
 - ctest -C Release --output-on-failure
@@ -1,6 +1,7 @@
 name: "Docker"

 on:
+
  # Always have a base image ready to go - this is a nightly build
  schedule:
    - cron: 0 3 * * *
@@ -25,6 +26,7 @@ jobs:
    strategy:
      fail-fast: false
      matrix:
+
        # Dockerfiles to build, a matrix supports future expanded builds
        container: [["config/docker/Dockerfile.base", "ghcr.io/mfem/mfem-ubuntu-base"],
                    ["config/docker/Dockerfile", "ghcr.io/mfem/mfem-ubuntu"]]
@@ -32,20 +34,15 @@ jobs:
    runs-on: ubuntu-latest
    name: Build
    steps:
-      - name: Run Actions Cleaner
-        uses: easimon/maximize-build-space@v8
-        with:
-          overprovision-lvm: 'true'
-          remove-dotnet: 'true'
-          remove-android: 'true'
-          remove-haskell: 'true'
-          remove-codeql: 'true'
-          remove-docker-images: 'true'
-
      - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3

-      # It's easier to reference named variables than indexes of the matrix
+      - name: Make Space For Build
+        run: |
+          sudo rm -rf /usr/share/dotnet
+          sudo rm -rf /opt/ghc
+
+       # It's easier to reference named variables than indexes of the matrix
      - name: Set Environment
        env:
          dockerfile: ${{ matrix.container[0] }}
@@ -65,7 +62,7 @@ jobs:

      - name: GHCR Login
        if: (github.event_name != 'pull_request')
-        uses: docker/login-action@v3
+        uses: docker/login-action@v1
        with:
          registry: ghcr.io
          username: ${{ github.actor }}
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -33,7 +33,6 @@ env:
  HYPRE_ARCHIVE: v2.19.0.tar.gz
  HYPRE_TOP_DIR: hypre-2.19.0
  METIS_ARCHIVE: metis-4.0.3.tar.gz
-  METIS_ARCHIVE_MAC: metis-4.0.3-mac.tgz
  METIS_TOP_DIR: metis-4.0.3
  MFEM_TOP_DIR: mfem

@@ -66,33 +65,21 @@ jobs:
        # - Add a new combination.
        #   'build-system: cmake' and 'hypre-target: int64'
        #
-        # Note: we will gather coverage info for any non-debug run except the
+        # note: we will gather coverage info for any non-debug run except the
        # CMake build.
        include:
          - target: dbg
            codecov: NO
          - target: opt
            codecov: YES
-          - os: ubuntu-latest
-            target: dbg
-            config-opts: 'CPPFLAGS+=-Og'
-          - os: macos-latest
-            codecov: NO
          - os: windows-latest
            codecov: NO
-          - os: windows-latest
-            target: opt
-            mpi: par
-            config-opts: '-DBUILD_SHARED_LIBS=ON'
          - os: ubuntu-latest
            target: opt
            codecov: NO
            mpi: par
            build-system: cmake
            hypre-target: int32
-            # This option can be set to pass additional configuration options to
-            # the MFEM configuration command.
-            # config-opts: '-DCMAKE_VERBOSE_MAKEFILE=ON'
          - os: ubuntu-latest
            target: opt
            codecov: NO
@@ -104,200 +91,182 @@ jobs:
    runs-on: ${{ matrix.os }}

    steps:
-      # This external action allows to interrupt a workflow already running on
-      # the same branch to save resources.
-      - name: Cancel Previous Runs
-        uses: styfle/cancel-workflow-action@0.12.1
-        with:
-          access_token: ${{ github.token }}
+    # This external action allows to interrupt a workflow already running on
+    # the same branch to save resource
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.9.0
+      with:
+        access_token: ${{ github.token }}

-      # Fix 'No space left on device' errors for Ubuntu builds.
-      - name: Run Actions Cleaner
-        if: matrix.os == 'ubuntu-latest'
-        uses: easimon/maximize-build-space@v8
-        with:
-          overprovision-lvm: 'true'
-          remove-android: 'true'
+    # Checkout MFEM in "mfem" subdirectory. Final path:
+    # /home/runner/work/mfem/mfem/mfem
+    # Note: Done now to access "install-hypre" and "install-metis" actions.
+    - name: checkout mfem
+      uses: actions/checkout@v2
+      with:
+        path: ${{ env.MFEM_TOP_DIR }}
+        # Fetch the complete history for codecov to access commits ID
+        fetch-depth: 0

-      # Checkout MFEM in "mfem" subdirectory. Final path:
-      # /home/runner/work/mfem/mfem/mfem
-      # Note: Done now to access "install-hypre" and "install-metis" actions.
-      - name: checkout mfem
-        uses: actions/checkout@v4
-        with:
-          path: ${{ env.MFEM_TOP_DIR }}
-          # Fetch the complete history for codecov to access commits ID
-          fetch-depth: 0
+    # Only get MPI if defined for the job.
+    # TODO: It would be nice to have only one step, e.g. with a dedicated
+    # action, but I (@adrienbernede) don't see how at the moment.
+    - name: get MPI (Linux)
+      if: matrix.mpi == 'par' && matrix.os == 'ubuntu-latest'
+      run: |
+        sudo apt-get install mpich libmpich-dev
+        export MAKE_CXX_FLAG="MPICXX=mpic++"

-      - name: Xcode version setup (MacOS)
-        if: matrix.os == 'macos-latest'
-        run: |
-          XCODE_PATH="/Applications/Xcode_15.3.app"
-          echo "> sudo xcode-select -s ${XCODE_PATH}"
-          sudo xcode-select -s ${XCODE_PATH}
-          echo "> g++ -v"
-          g++ -v
-          echo "> clang++ -v"
-          clang++ -v
+    - name: get lcov (Linux)
+      if: matrix.codecov == 'YES' && matrix.os == 'ubuntu-latest'
+      run: |
+        sudo apt-get install lcov

-      # Only get MPI if defined for the job.
-      # TODO: It would be nice to have only one step, e.g. with a dedicated
-      # action, but I (@adrienbernede) don't see how at the moment.
-      - name: get MPI (Linux)
-        if: matrix.mpi == 'par' && matrix.os == 'ubuntu-latest'
-        run: |
-          sudo apt-get install mpich libmpich-dev
+    - name: Set up Homebrew
+      if: ( matrix.mpi == 'par' || matrix.codecov == 'YES' ) && matrix.os == 'macos-latest'
+      uses: Homebrew/actions/setup-homebrew@c4aafe8c4620bf08883dd4679c374f11e73329d3

-      - name: get lcov (Linux)
-        if: matrix.codecov == 'YES' && matrix.os == 'ubuntu-latest'
-        run: |
-          sudo apt-get install lcov
+    - name: get MPI (MacOS)
+      if: matrix.mpi == 'par' && matrix.os == 'macos-latest'
+      run: |
+        export HOMEBREW_NO_INSTALL_CLEANUP=1
+        brew install openmpi
+        export MAKE_CXX_FLAG="MPICXX=mpic++"

-      # Keep the following section in case we need it again in the future,
-      # see: https://github.com/mfem/mfem/pull/3385#discussion_r1058013032
-      # - name: Set up Homebrew
-      #   if: ( matrix.mpi == 'par' || matrix.codecov == 'YES' ) && matrix.os == 'macos-latest'
-      #   uses: Homebrew/actions/setup-homebrew@master
+    - name: get MPI (MacOS)
+      if: matrix.codecov == 'YES' && matrix.os == 'macos-latest'
+      run: |
+        export HOMEBREW_NO_INSTALL_CLEANUP=1
+        brew install lcov

-      - name: get MPI (MacOS)
-        if: matrix.mpi == 'par' && matrix.os == 'macos-latest'
-        run: |
-          export HOMEBREW_NO_INSTALL_CLEANUP=1
-          brew install openmpi
+    - name: get MPI (Windows)
+      if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
+      uses: mpi4py/setup-mpi@v1.0.3

-      - name: get lcov (MacOS)
-        if: matrix.codecov == 'YES' && matrix.os == 'macos-latest'
-        run: |
-          export HOMEBREW_NO_INSTALL_CLEANUP=1
-          brew install lcov
+    # Get Hypre through cache, or build it.
+    # Install will only run on cache miss.
+    - name: cache hypre
+      id: hypre-cache
+      if: matrix.mpi == 'par'
+      uses: actions/cache@v2
+      with:
+        path: ${{ env.HYPRE_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-${{ matrix.hypre-target }}-v2.2

-      - name: get MPI (Windows)
-        if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
-        uses: mpi4py/setup-mpi@v1.1.4
+    - name: get hypre
+      if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os != 'windows-latest'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: ${{ matrix.hypre-target }}
+        build-system: make

-      # Get Hypre through cache, or build it.
-      # Install will only run on cache miss.
-      - name: cache hypre
-        id: hypre-cache
-        if: matrix.mpi == 'par'
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.HYPRE_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-${{ matrix.hypre-target }}-v2.2
+    - name: get hypre (Windows)
+      if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os == 'windows-latest'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: ${{ matrix.hypre-target }}
+        build-system: cmake

-      - name: get hypre
-        if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os != 'windows-latest'
-        uses: mfem/github-actions/build-hypre@v2.4
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: ${{ matrix.hypre-target }}
-          build-system: make
+    # Get Metis through cache, or build it.
+    # Install will only run on cache miss.
+    - name: cache metis
+      id: metis-cache
+      if: matrix.mpi == 'par' && matrix.os != 'windows-latest'
+      uses: actions/cache@v2
+      with:
+        path: ${{ env.METIS_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2

-      - name: get hypre (Windows)
-        if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os == 'windows-latest'
-        uses: mfem/github-actions/build-hypre@v2.4
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: ${{ matrix.hypre-target }}
-          build-system: cmake
+    - name: install metis
+      if: matrix.mpi == 'par' && matrix.os != 'windows-latest' && steps.metis-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-metis@v2.2
+      with:
+        archive: ${{ env.METIS_ARCHIVE }}
+        dir: ${{ env.METIS_TOP_DIR }}

-      # Get Metis through cache, or build it.
-      # Install will only run on cache miss.
-      - name: cache metis
-        id: metis-cache
-        if: matrix.mpi == 'par' && matrix.os != 'windows-latest'
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.METIS_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2
+    - name: cache vcpkg (Windows)
+      id: vcpkg-cache
+      uses: actions/cache@v3
+      with:
+        path: vcpkg_cache
+        key: ${{ runner.os }}-${{ matrix.mpi }}-vcpkg-v1

-      - name: install metis
-        if: matrix.mpi == 'par' && matrix.os != 'windows-latest' && steps.metis-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-metis@v2.4
-        with:
-          archive: ${{ matrix.os != 'macos-latest' && env.METIS_ARCHIVE || env.METIS_ARCHIVE_MAC }}
-          dir: ${{ env.METIS_TOP_DIR }}
+    - name: prepare binary cache location
+      if: matrix.os == 'windows-latest' && steps.vcpkg-cache.outputs.cache-hit != 'true'
+      run: |
+        mkdir -p vcpkg_cache

-      - name: cache vcpkg (Windows)
-        id: vcpkg-cache
-        if: matrix.os == 'windows-latest'
-        uses: actions/cache@v4
-        with:
-          path: vcpkg_cache
-          key: ${{ runner.os }}-${{ matrix.mpi }}-vcpkg-v1
+    - name: install metis (Windows)
+      if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
+      env:
+        VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
+      run: |
+        vcpkg install metis-mfem --triplet=x64-windows-static --overlay-ports=${{ env.MFEM_TOP_DIR }}/config/vcpkg/ports

-      - name: prepare vcpkg binary cache location (Windows)
-        if: matrix.os == 'windows-latest' && steps.vcpkg-cache.outputs.cache-hit != 'true'
-        run: |
-          mkdir -p vcpkg_cache
+    # MFEM build and test
+    - name: build
+      uses: mfem/github-actions/build-mfem@v2.2
+      env:
+        VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
+      with:
+        os: ${{ matrix.os }}
+        target: ${{ matrix.target }}
+        codecov: ${{ matrix.codecov }}
+        mpi: ${{ matrix.mpi }}
+        build-system: ${{ matrix.build-system }}
+        hypre-dir: ${{ env.HYPRE_TOP_DIR }}
+        metis-dir: ${{ env.METIS_TOP_DIR }}
+        mfem-dir: ${{ env.MFEM_TOP_DIR }}
+        config-options: ${{ env.MFEM_EXTRA_CONFIG }}
+        library-only: ${{ matrix.target == 'dbg' }}

-      - name: install metis (Windows)
-        if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
-        env:
-          VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
-        run: |
-          vcpkg install metis-mfem --triplet=x64-windows-static --overlay-ports=${{ env.MFEM_TOP_DIR }}/config/vcpkg/ports
+    # Run checks (and only checks) on debug targets
+    - name: checks
+      if: matrix.build-system == 'make' && matrix.target == 'dbg'
+      run: |
+        cd ${{ env.MFEM_TOP_DIR }}  && make check

-      # MFEM build and test
-      - name: build
-        uses: mfem/github-actions/build-mfem@v2.4
-        env:
-          VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
-        with:
-          os: ${{ matrix.os }}
-          target: ${{ matrix.target }}
-          codecov: ${{ matrix.codecov }}
-          mpi: ${{ matrix.mpi }}
-          build-system: ${{ matrix.build-system }}
-          hypre-dir: ${{ env.HYPRE_TOP_DIR }}
-          metis-dir: ${{ env.METIS_TOP_DIR }}
-          mfem-dir: ${{ env.MFEM_TOP_DIR }}
-          config-options: ${{ matrix.config-opts }}
-          library-only: ${{ matrix.target == 'dbg' && matrix.os != 'ubuntu-latest' }}
+    - name: unit tests
+      if: matrix.build-system == 'make' && matrix.target == 'opt'
+      run: |
+        cd ${{ env.MFEM_TOP_DIR }} && make unittest

-      # Run checks (and only checks) on debug targets
-      - name: checks
-        if: matrix.build-system == 'make' && matrix.target == 'dbg'
-        run: |
-          cd ${{ env.MFEM_TOP_DIR }}  && make check
+    - name: tests
+      if: matrix.build-system == 'make' && matrix.target == 'opt'
+      run: |
+        cd ${{ env.MFEM_TOP_DIR }} && make test

-      # Note: 'tests' include the unit tests
-      - name: tests
-        if: matrix.build-system == 'make' && (matrix.target == 'opt' || matrix.os == 'ubuntu-latest')
-        run: |
-          cd ${{ env.MFEM_TOP_DIR }} && make test
+    - name: cmake checks
+      if: matrix.build-system == 'cmake' && matrix.target == 'dbg'
+      run: |
+        CTEST_CONFIG="Debug"
+        cd ${{ env.MFEM_TOP_DIR }} && cmake --build build --target check --config ${CTEST_CONFIG}
+      shell: bash

-      - name: cmake checks
-        if: matrix.build-system == 'cmake' && matrix.target == 'dbg'
-        run: |
-          CTEST_CONFIG="Debug"
-          cd ${{ env.MFEM_TOP_DIR }} && cmake --build build --target check --config ${CTEST_CONFIG}
-        shell: bash
+    - name: cmake unit tests (Ubuntu 20.04)
+      if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os == 'ubuntu-latest'
+      run: |
+        CTEST_CONFIG="Release"
+        [[ ${{ matrix.target }} == 'dbg' ]] && CTEST_CONFIG="Debug"
+        cd ${{ env.MFEM_TOP_DIR }}/build/tests/unit && ctest --output-on-failure -C ${CTEST_CONFIG}
+      shell: bash

-      - name: cmake unit tests (Ubuntu)
-        if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os == 'ubuntu-latest'
-        run: |
-          CTEST_CONFIG="Release"
-          [[ ${{ matrix.target }} == 'dbg' ]] && CTEST_CONFIG="Debug"
-          cd ${{ env.MFEM_TOP_DIR }}/build/tests/unit && ctest --output-on-failure -C ${CTEST_CONFIG}
-        shell: bash
+    - name: cmake tests
+      if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os != 'ubuntu-latest'
+      run: |
+        CTEST_CONFIG="Release"
+        cd ${{ env.MFEM_TOP_DIR }}/build && ctest --output-on-failure -C ${CTEST_CONFIG}
+      shell: bash

-      - name: cmake tests
-        if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os != 'ubuntu-latest'
-        run: |
-          CTEST_CONFIG="Release"
-          cd ${{ env.MFEM_TOP_DIR }}/build && \
-          ctest --output-on-failure -C ${CTEST_CONFIG} || \
-          ctest --rerun-failed --output-on-failure -C ${CTEST_CONFIG}
-        shell: bash
-
-      # Code coverage (process and upload reports)
-      - name: codecov
-        if: matrix.codecov == 'YES'
-        uses: mfem/github-actions/upload-coverage@v2.4
-        with:
-          name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}
-          project_dir: ${{ env.MFEM_TOP_DIR }}
-          directories: "fem general linalg mesh"
+    # Code coverage (process and upload reports)
+    - name: codecov
+      if: matrix.codecov == 'YES'
+      uses: mfem/github-actions/upload-coverage@v2.0
+      with:
+        name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}
+        project_dir: ${{ env.MFEM_TOP_DIR }}
+        directories: "fem general linalg mesh"
@@ -13,10 +13,10 @@ name: "Static Analysis"

 on:
  push:
-    branches: ["master", "next"]
+    branches: [ "master", "next"]
  pull_request:
    # The branches below must be a subset of the branches above
-    branches: ["master"]
+    branches: [ "master" ]

 jobs:
  analyze:
@@ -35,35 +35,37 @@ jobs:
        # Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support

    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
+    - name: Checkout repository
+      uses: actions/checkout@v3

-      # Initializes the CodeQL tools for scanning.
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v2
-        with:
-          languages: ${{ matrix.language }}
-          # If you wish to specify custom queries, you can do so here or in a config file.
-          # By default, queries listed here will override any specified in a config file.
-          # Prefix the list here with "+" to use these queries and those in the config file.
+    # Initializes the CodeQL tools for scanning.
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v2
+      with:
+        languages: ${{ matrix.language }}
+        # If you wish to specify custom queries, you can do so here or in a config file.
+        # By default, queries listed here will override any specified in a config file.
+        # Prefix the list here with "+" to use these queries and those in the config file.

-          # Details on CodeQL's query packs refer to : https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
-          # queries: security-extended,security-and-quality
+        # Details on CodeQL's query packs refer to : https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+        # queries: security-extended,security-and-quality
+        queries: lgtm

-      # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
-      # If this step fails, then you should remove it and run the build manually (see below)
-      - name: Autobuild
-        uses: github/codeql-action/autobuild@v2

-      # ℹ️ Command-line programs to run using the OS shell.
-      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
+    # If this step fails, then you should remove it and run the build manually (see below)
+    - name: Autobuild
+      uses: github/codeql-action/autobuild@v2

-      #   If the Autobuild fails above, remove it and uncomment the following three lines.
-      #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
+    # ℹ️ Command-line programs to run using the OS shell.
+    # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun

-      # - run: |
-      #   echo "Run, Build Application using script"
-      #   ./location_of_script_within_repo/buildscript.sh
+    #   If the Autobuild fails above, remove it and uncomment the following three lines.
+    #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.

-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v2
+    # - run: |
+    #   echo "Run, Build Application using script"
+    #   ./location_of_script_within_repo/buildscript.sh
+
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v2
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -34,67 +34,68 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-      - name: Cancel Previous Runs
-        uses: styfle/cancel-workflow-action@0.12.1
-        with:
-          access_token: ${{ github.token }}
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.9.0
+      with:
+        access_token: ${{ github.token }}

-      - name: checkout MFEM
-        uses: actions/checkout@v4
-        with:
-          path: mfem
+    - name: checkout MFEM
+      uses: actions/checkout@v2
+      with:
+        path: mfem

-      - name: Get MPI (Linux)
-        run: |
-          sudo apt-get install mpich libmpich-dev
+    - name: Get MPI (Linux)
+      run: |
+        sudo apt-get install mpich libmpich-dev
+        export MAKE_CXX_FLAG="MPICXX=mpic++"

-      - name: Cache Hypre Install
-        id: hypre-cache
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.HYPRE_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-v2.2
+    - name: Cache Hypre Install
+      id: hypre-cache
+      uses: actions/cache@v2
+      with:
+        path: ${{ env.HYPRE_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-v2.2

-      - name: Get Hypre
-        if: steps.hypre-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-hypre@v2.4
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: int32
+    - name: Get Hypre
+      if: steps.hypre-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: int32

-      - name: Cache Metis Install
-        id: metis-cache
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.METIS_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2
+    - name: Cache Metis Install
+      id: metis-cache
+      uses: actions/cache@v2
+      with:
+        path: ${{ env.METIS_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2

-      - name: Install Metis
-        if: steps.metis-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-metis@v2.4
-        with:
-          archive: ${{ env.METIS_ARCHIVE }}
-          dir: ${{ env.METIS_TOP_DIR }}
+    - name: Install Metis
+      if: steps.metis-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-metis@v2.2
+      with:
+        archive: ${{ env.METIS_ARCHIVE }}
+        dir: ${{ env.METIS_TOP_DIR }}

-      # MFEM build and test
-      - name: build-mfem
-        uses: mfem/github-actions/build-mfem@v2.4
-        with:
-          os: ${{ runner.os }}
-          target: opt
-          codecov: NO
-          mpi: par
-          build-system: make
-          hypre-dir: ${{ env.HYPRE_TOP_DIR }}
-          metis-dir: ${{ env.METIS_TOP_DIR }}
-          mfem-dir: mfem
+    # MFEM build and test
+    - name: build-mfem
+      uses: mfem/github-actions/build-mfem@v2.2
+      with:
+        os: ${{ runner.os }}
+        target: opt
+        codecov: NO
+        mpi: par
+        build-system: make
+        hypre-dir: ${{ env.HYPRE_TOP_DIR }}
+        metis-dir: ${{ env.METIS_TOP_DIR }}
+        mfem-dir: mfem

-      - name: test (no clean)
-        run: |
-          cd mfem && make test-noclean
+    - name: test (no clean)
+      run: |
+        cd mfem && make test-noclean

-      - name: gitignore
-        run: |
-          cd mfem/tests/scripts
-          ./runtest gitignore
+    - name: gitignore
+      run: |
+        cd mfem/tests/scripts
+        ./runtest gitignore
@@ -1,76 +0,0 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-name: "Sanitizer"
-
-permissions:
-  actions: write
-
-on:
-  push:
-    branches:
-      - master
-      - next
-  pull_request:
-  workflow_dispatch:
-
-jobs:
-  Serial:
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Temporary workaround for sanitizer crashes
-        # See https://github.com/actions/runner-images/issues/9491
-        # The issue should be fixed in the next runner image for Ubuntu 22.04,
-        # see https://github.com/actions/runner-images/pull/9513
-        run: sudo sysctl vm.mmap_rnd_bits=28
-
-      - name: Cancel Previous Runs
-        uses: styfle/cancel-workflow-action@0.12.1
-        with:
-          access_token: ${{ github.token }}
-
-      - name: MFEM Checkout
-        uses: actions/checkout@v4
-        with:
-          path: mfem
-
-      - name: MFEM Build
-        uses: mfem/github-actions/build-mfem@v2.4
-        with:
-          os: ${{ runner.os }}
-          target: opt
-          mpi: seq
-          hypre-dir: unused-hypre-dir
-          metis-dir: unused-metis-dir
-          mfem-dir: mfem
-          build-system: make
-          library-only: false
-          config-options:
-            CXX="clang++-14"
-            CXXFLAGS="-g -O1 -std=c++11
-                      -fsanitize=address
-                      -fno-omit-frame-pointer
-                      -fsanitize-address-use-after-scope"
-
-      - name: MFEM Info
-        working-directory: mfem
-        run: make info
-
-      - name: MFEM Sanitize
-        working-directory: mfem
-        run:
-          ASAN_OPTIONS="detect_leaks=1,
-                        strict_init_order=1,
-                        strict_string_checks=1,
-                        check_initialization_order=1,
-                        detect_stack_use_after_return=1"
-          make test
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -33,59 +33,49 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: Cancel Previous Runs
-        uses: styfle/cancel-workflow-action@0.12.1
-        with:
-          access_token: ${{ github.token }}
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.9.0
+      with:
+        access_token: ${{ github.token }}

-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: checkout mfem
+      uses: actions/checkout@v2

-      - name: copyright check
-        id: copyright
-        run: |
-          ./config/githooks/pre-push --copyright
+    - name: copyright check
+      id: copyright
+      run: |
+        ./config/githooks/pre-push --copyright

-        continue-on-error: true
+      continue-on-error: true

-      - name: license check
-        id: license
-        run: |
-          ./config/githooks/pre-push --license
-        continue-on-error: true
+    - name: license check
+      id: license
+      run: |
+        ./config/githooks/pre-push --license
+      continue-on-error: true

-      - name: release check
-        id: release
-        run: |
-          ./config/githooks/pre-push --release
-        continue-on-error: true
+    - name: release check
+      id: release
+      run: |
+        ./config/githooks/pre-push --release
+      continue-on-error: true

-      - name: math check
-        id: math
-        run: |
-          ./config/githooks/pre-push --math
-        continue-on-error: true
-
-      - name: wrap-up
-        if: |
-          steps.copyright.outcome != 'success' ||
-          steps.license.outcome != 'success' ||
-          steps.release.outcome != 'success' ||
-          steps.math.outcome != 'success'
-        run: |
-          if [[ "${{ steps.copyright.outcome }}" != "success" ]]; then
-            echo "copyright check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.license.outcome }}" != "success" ]]; then
-            echo "license check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.release.outcome }}" != "success" ]]; then
-            echo "release check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.math.outcome }}" != "success" ]]; then
-            echo "math check failed, unroll log for details"
-          fi
-          exit 1
+    - name: wrap-up
+      if: |
+        steps.copyright.outcome != 'success' ||
+        steps.license.outcome != 'success' ||
+        steps.release.outcome != 'success'
+      run: |
+        if [[ "${{ steps.copyright.outcome }}" != "success" ]]; then
+          echo "copyright check failed, unroll log for details"
+        fi
+        if [[ "${{ steps.license.outcome }}" != "success" ]]; then
+          echo "license check failed, unroll log for details"
+        fi
+        if [[ "${{ steps.release.outcome }}" != "success" ]]; then
+          echo "release check failed, unroll log for details"
+        fi
+        exit 1

  code-style:
    runs-on: ubuntu-latest
@@ -93,16 +83,16 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: checkout mfem
+      uses: actions/checkout@v2

-      - name: get astyle
-        run: |
-          sudo apt-get install astyle
+    - name: get astyle
+      run: |
+        sudo apt-get install astyle

-      - name: style check
-        run: |
-          ./config/githooks/pre-push --style
+    - name: style check
+      run: |
+        ./config/githooks/pre-push --style

  documentation:
    runs-on: ubuntu-latest
@@ -110,22 +100,19 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: checkout mfem
+      uses: actions/checkout@v2

-      - name: get doxygen and graphviz
-        run: |
-          sudo apt-get install doxygen graphviz
+    - name: get doxygen and graphviz
+      run: |
+        sudo apt-get install doxygen graphviz
+        cd doc
+        doxygen -u CodeDocumentation.conf.in 2>/dev/null

-      - name: update doxygen config file
-        run: |
-          cd doc
-          doxygen -u CodeDocumentation.conf.in
-
-      - name: build documentation
-        run: |
-          cd tests/scripts
-          ./runtest documentation
+    - name: build documentation
+      run: |
+        cd tests/scripts
+        ./runtest documentation

  branch-history:
    if: |
@@ -135,16 +122,16 @@ jobs:
       github.event.pull_request.head.repo.full_name != github.repository)
    runs-on: ubuntu-latest
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
+    - name: checkout mfem
+      uses: actions/checkout@v2
+      with:
+        fetch-depth: 0

-      - name: branch-history
-        run: |
-          # We override origin to make sure we point to the main repo.
-          # This is to have consistent test results on PRs from forks.
-          git remote remove origin
-          git remote add origin https://github.com/mfem/mfem.git
-          git checkout -b gh-actions-branch-history
-          ./config/githooks/pre-push --history
+    - name: branch-history
+      run: |
+        # We override origin to make sure we point to the main repo.
+        # This is to have consistent test results on PRs from forks.
+        git remote remove origin
+        git remote add origin https://github.com/mfem/mfem.git
+        git checkout -b gh-actions-branch-history
+        ./config/githooks/pre-push --history
@@ -21,15 +21,11 @@ CMakeFiles/
 # Default install location
 /mfem/

-# Typical build directory
-/build/
-
 # Generated files in main directory, config/ and docs/
 /deps.mk
 config/_config.hpp
 config/config.mk
 config/sample-runs-build.log
-config/user.cmake
 config/user.mk
 doc/CodeDocumentation.conf
 doc/CodeDocumentation.html
@@ -91,6 +87,10 @@ examples/ex16.mesh
 examples/ex16-mesh.*
 examples/ex16-init.*
 examples/ex16-final.*
+examples/vortex-mesh.*
+examples/vortex.mesh
+examples/vortex-?-init.*
+examples/vortex-?-final.*
 examples/deformation.*
 examples/pressure.*
 examples/ex20.dat
@@ -109,14 +109,6 @@ examples/ex25p-*.*
 examples/ex28_*
 examples/ex28p_*
 examples/flux.*
-examples/dsol.*
-examples/cond.*
-examples/cond_j.*
-examples/cond_mesh.*
-examples/port_mesh.*
-examples/port_mode.*
-
-examples/euler-*

 examples/amgx/ex1
 examples/amgx/ex1p
@@ -126,16 +118,11 @@ examples/amgx/sol.gf
 examples/amgx/mesh.*
 examples/amgx/sol.*

-examples/caliper/ex1
-examples/caliper/ex1p
-examples/caliper/refined.mesh
-examples/caliper/sol.gf
-examples/caliper/mesh.*
-examples/caliper/sol.*
-
-examples/ginkgo/ex1
-examples/ginkgo/refined.mesh
-examples/ginkgo/sol.gf
+examples/gingko/ex1
+examples/gingko/refined.mesh
+examples/gingko/sol.gf
+examples/gingko/mesh.*
+examples/gingko/sol.*

 examples/hiop/ex9
 examples/hiop/ex9p
@@ -161,8 +148,8 @@ examples/petsc/velocity.*
 examples/petsc/elastic_energy.*
 examples/petsc/mode_*

-examples/pumi/ex[12]
-examples/pumi/ex[16]p
+examples/pumi/ex1
+examples/pumi/ex[126]p
 examples/pumi/refined.mesh
 examples/pumi/sol.gf
 examples/pumi/mesh.*
@@ -207,9 +194,6 @@ miniapps/gslib/field-diff
 miniapps/gslib/field-interp
 miniapps/gslib/findpts
 miniapps/gslib/pfindpts
-miniapps/gslib/schwarz_ex1
-miniapps/gslib/schwarz_ex1p
-miniapps/gslib/interpolated.gf

 miniapps/meshing/mobius-strip
 miniapps/meshing/klein-bottle
@@ -218,28 +202,21 @@ miniapps/meshing/twist
 miniapps/meshing/mesh-explorer
 miniapps/meshing/shaper
 miniapps/meshing/extruder
-miniapps/meshing/fit-node-position
 miniapps/meshing/trimmer
-miniapps/meshing/reflector
 miniapps/meshing/mesh-optimizer
 miniapps/meshing/pmesh-optimizer
-miniapps/meshing/pmesh-fitting
 miniapps/meshing/minimal-surface
 miniapps/meshing/pminimal-surface
 miniapps/meshing/polar-nc
-miniapps/meshing/mesh-quality
 miniapps/meshing/mobius-strip.mesh
 miniapps/meshing/klein-bottle.mesh
 miniapps/meshing/toroid-*.mesh
 miniapps/meshing/twist-*.mesh
-miniapps/meshing/mesh-explorer.mesh*
+miniapps/meshing/mesh-explorer.mesh
 miniapps/meshing/partitioning.txt
-miniapps/meshing/mesh-explorer-visit*
-miniapps/meshing/mesh-explorer-paraview/
 miniapps/meshing/shaper.mesh
 miniapps/meshing/extruder.mesh
 miniapps/meshing/trimmer.mesh
-miniapps/meshing/reflected.mesh
 miniapps/meshing/optimized*
 miniapps/meshing/perturbed*
 miniapps/meshing/polar-nc.mesh
@@ -264,27 +241,17 @@ miniapps/navier/navier_tgv
 miniapps/navier/navier_shear
 miniapps/navier/navier_3dfoc
 miniapps/navier/navier_turbchan
-miniapps/navier/navier_cht
 miniapps/navier/tgv_out*.txt
 miniapps/navier/*_output

 miniapps/nurbs/nurbs_ex1
 miniapps/nurbs/nurbs_ex1p
 miniapps/nurbs/nurbs_ex11p
-miniapps/nurbs/nurbs_printfunc
-miniapps/nurbs/nurbs_patch_ex1
-miniapps/nurbs/nurbs_curveint
 miniapps/nurbs/refined.mesh
 miniapps/nurbs/mesh.*
 miniapps/nurbs/sol.*
 miniapps/nurbs/mode_*
 miniapps/nurbs/Example1*
-miniapps/nurbs/sin-fit.mesh
-miniapps/nurbs/CurveInt
-miniapps/nurbs/nurbs_naca_cmesh
-miniapps/nurbs/naca-cmesh.mesh
-miniapps/nurbs/glvis_naca-cmesh.mesh
-miniapps/nurbs/Naca_cmesh

 miniapps/performance/ex1
 miniapps/performance/ex1p
@@ -307,14 +274,7 @@ miniapps/tools/display-basis
 miniapps/tools/load-dc
 miniapps/tools/convert-dc
 miniapps/tools/lor-transfer
-miniapps/tools/plor-transfer
 miniapps/tools/get-values
-miniapps/tools/tmop-check-metric
-miniapps/tools/tmop-metric-magnitude
-miniapps/tools/nodal-transfer
-miniapps/tools/ParaView
-miniapps/tools/gridfunc_*
-miniapps/tools/mesh_*

 miniapps/toys/automata
 miniapps/toys/life
@@ -340,37 +300,15 @@ miniapps/toys/mondrian.mesh
 miniapps/solvers/block-solvers
 miniapps/solvers/lor_solvers
 miniapps/solvers/plor_solvers
-miniapps/solvers/lor_elast
 miniapps/solvers/ParaView
 miniapps/solvers/mesh.*
 miniapps/solvers/sol.*

-miniapps/hdiv-linear-solver/darcy
-miniapps/hdiv-linear-solver/grad_div
-
 miniapps/parelag/MultilevelHcurlHdivSolver
 miniapps/parelag/*.mesh

-miniapps/multidomain/multidomain
-miniapps/multidomain/multidomain_nd
-miniapps/multidomain/multidomain_rt
 miniapps/hooke/hooke

-miniapps/dpg/diffusion
-miniapps/dpg/pdiffusion
-miniapps/dpg/convection-diffusion
-miniapps/dpg/pconvection-diffusion
-miniapps/dpg/acoustics
-miniapps/dpg/pacoustics
-miniapps/dpg/maxwell
-miniapps/dpg/pmaxwell
-miniapps/dpg/ParaView
-
-miniapps/spde/generate_random_field
-miniapps/spde/ParaView
-
-miniapps/tribol/contact-patch-test
-
 # Unit test binary and outputs
 tests/unit/output_meshes
 tests/unit/unit_tests
@@ -383,8 +321,6 @@ tests/unit/tmop_pa_tests_*
 tests/unit/ptmop_pa_tests_*
 tests/unit/ceed_tests
 tests/unit/debug_device_tests
-tests/unit/parallel_in_serial.mesh
-tests/unit/parallel_in_serial.gf

 # Benchmark binaries
 tests/benchmarks/bench_ceed
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -22,10 +22,12 @@
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -55,10 +57,12 @@
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -47,10 +47,12 @@ setup_baseline:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -35,11 +35,13 @@ setup:
      (
        date
        echo "Waiting to acquire lock on '$PWD/mfem-data.lock' ..."
-        # try to get an exclusive lock on fd 9 (mfem-data.lock) repeating the
-        # try every 5 seconds; we may want to add a counter for the number of
+        # try to get an exclusive lock on fd 9 (mfem-data.lock) repeating the try
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/mfem-data.lock'"
        date
@@ -67,10 +69,12 @@ setup:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,14 +14,14 @@ stages:
  - build_and_test
  - report

-opt_mpi_cuda_xl_16_1_1_12:
+opt_mpi_cuda_xl_16_1_1_8:
  variables:
-    SPEC: "%xl@16.1.1.12 +mpi +cuda cuda_arch=70"
+    SPEC: "%xl@16.1.1.8 +mpi +cuda cuda_arch=70"
  extends: .build_and_test_on_lassen

 opt_mpi_cuda_hypre_cuda_xl:
  variables:
-    SPEC: "%xl@16.1.1.12 +mpi +cuda cuda_arch=70 ^hypre+cuda~shared cuda_arch=70"
+    SPEC: "%xl@16.1.1.8 +mpi +cuda cuda_arch=70 ^hypre+cuda~shared cuda_arch=70"
  extends: .build_and_test_on_lassen

 # Jobs report
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -51,8 +51,6 @@ cleanup:
  script:
    - echo "BUILD_ROOT=${BUILD_ROOT}"
    - rm -rf "${BUILD_ROOT}" || true
-    - echo "CI_PROJECT_DIR=${CI_PROJECT_DIR}"
-    - make -C "${CI_PROJECT_DIR}" distclean

 report_baseline:
  extends: [.on_quartz]
@@ -68,10 +66,12 @@ report_baseline:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -82,20 +82,18 @@ report_baseline:
        rundir="${MACHINE_NAME}/$(date +%Y-%m-%d)-gitlab-${BASELINE_TEST}-${CI_COMMIT_REF_SLUG}"
        rundir=$(${CI_PROJECT_DIR}/.gitlab/scripts/safe_create_rundir ${rundir})
        cp ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/* ${rundir}
+        # We create an autotest-email.html file, because that's how we signal that there was a diff (temporary).
+        if [[ -f ${rundir}/${BASELINE_TEST}.err ]]; then
+          cp ${rundir}/${BASELINE_TEST}.err ${rundir}/autotest-email.html
+        fi
        printf "%s\n" "" "Pipeline URL:" "$CI_PIPELINE_URL" \
          >> ${rundir}/pipeline.txt
-        # We create an autotest-email.html file, because that's how we signal
-        # that there was an error / diff (temporary).
-        if [[ -f ${rundir}/${BASELINE_TEST}.err ]] || \
-           [[ -f ${rundir}/${BASELINE_TEST}-${MACHINE_NAME}.diff ]]; then
-          cp ${rundir}/pipeline.txt ${rundir}/autotest-email.html
-        fi
        msg="GitLab CI log for ${BASELINE_TEST} on ${MACHINE_NAME} ($(date +%Y-%m-%d))"
        if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
          git pull && \
          git add ${rundir} && \
          git commit -m "${msg}" && \
-          ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+          git push origin master
        else
          for file in ${rundir}/*; do
            echo "------------------------------"
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -23,43 +23,48 @@ allocate_resource:
  stage: allocate_resource
  script:
    - echo ${ALLOC_NAME}
-    - salloc --exclusive --nodes=1 --reservation=ci --time=60 --no-shell --job-name=${ALLOC_NAME}
+    - salloc --exclusive --nodes=1 --partition=pdebug --time=45 --no-shell --job-name=${ALLOC_NAME}
  timeout: 6h

 # GitLab jobs for the Quartz machine at LLNL
-debug_ser_gcc_10:
+debug_ser_gcc_4_9_3:
  variables:
-    SPEC: "%gcc@10.3.1 +debug~mpi"
+    SPEC: "%gcc@4.9.3 +debug~mpi"
  extends: .build_and_test_on_quartz

-debug_par_gcc_10:
+debug_ser_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 +debug+mpi"
+    SPEC: "%gcc@6.1.0 +debug~mpi"
  extends: .build_and_test_on_quartz

-opt_ser_gcc_10:
+debug_par_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 ~mpi"
+    SPEC: "%gcc@6.1.0 +debug+mpi"
  extends: .build_and_test_on_quartz

-opt_par_gcc_10:
+opt_ser_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1"
+    SPEC: "%gcc@6.1.0 ~mpi"
  extends: .build_and_test_on_quartz

-opt_par_gcc_10_sundials:
+opt_par_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 +sundials"
+    SPEC: "%gcc@6.1.0"
  extends: .build_and_test_on_quartz

-opt_par_gcc_10_petsc:
+opt_par_gcc_6_1_0_sundials:
  variables:
-    SPEC: "%gcc@10.3.1 +petsc ^petsc+mumps~superlu-dist"
+    SPEC: "%gcc@6.1.0 +sundials"
  extends: .build_and_test_on_quartz

-opt_par_gcc_10_pumi:
+opt_par_gcc_6_1_0_petsc:
  variables:
-    SPEC: "%gcc@10.3.1 +pumi"
+    SPEC: "%gcc@6.1.0 +petsc ^petsc+mumps~superlu-dist"
+  extends: .build_and_test_on_quartz
+
+opt_par_gcc_6_1_0_pumi:
+  variables:
+    SPEC: "%gcc@6.1.0 +pumi"
  extends: .build_and_test_on_quartz

 # Release
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,9 +14,6 @@
 # locals
 glob_err=${BASELINE_TEST}.err
 base=${BASELINE_TEST}-${SYS_TYPE}
-if [[ "${MACHINE_NAME}" == "quartz" ]]; then
-  base="${BASELINE_TEST}-${MACHINE_NAME}"
-fi
 base_diff=${base}.diff
 base_patch=${base}.patch
 base_out=${base}.out
@@ -45,34 +42,47 @@ fi
 # post
 mkdir ${artifacts_path}

-status=0
-if [[ -f ${BASELINE_TEST}.out ]]; then
-  cp ${BASELINE_TEST}.out ${artifacts_path}
-fi
-if [[ -s ${glob_err} ]]; then
-  echo "ERROR during ${BASELINE_TEST} execution"
-  echo "Here is the ${glob_err} file content"
+if [[ -s ${glob_err} ]]
+then
+  echo "ERROR during ${BASELINE_TEST} execution";
+  echo "Here is the ${glob_err} file content";
  cat ${glob_err}
  cp ${glob_err} ${artifacts_path}/${glob_err}
-  status=1
-fi
-if [[ -f ${base_patch} ]]; then
+  exit 1;
+elif [[ ! -f ${base_patch} && ! -f ${base_out} ]]
+then
+  echo "Something went WRONG in ${BASELINE_TEST}:";
+  echo "Either ${base_patch} or ${base_out} should exists";
+  exit 1;
+elif [[ -f ${base_patch} ]]
+then
  echo "${BASELINE_TEST}: Differences found, patch generated"
  cp ${base_patch} ${artifacts_path}/${base_patch}
-elif [[ -f ${base_out} ]]; then
+elif [[ -f ${base_out} ]]
+then
  echo "${BASELINE_TEST}: Differences found, replacement file generated"
  cp ${base_out} ${artifacts_path}/${base_out}
 fi
+
+if [[ -f ${BASELINE_TEST}.out ]]; then
+  cp ${BASELINE_TEST}.out ${artifacts_path}
+fi
+
 # base_diff won't even exist if there is no difference.
-if [[ -f ${base_diff} ]]; then
+if [[ -f ${base_diff} ]]
+then
  echo "${BASELINE_TEST}: Relevant differences (filtered diff) ..."
  cat ${base_diff}
  cp ${base_diff} ${artifacts_path}/${base_diff}
-  status=1
+  # We create a .err file, because that's how we signal that there was a diff.
+  cp ${base_diff} ${artifacts_path}/gitlab-${BASELINE_TEST}-${MACHINE_NAME}.err
 fi
-if [[ $status -eq 0 ]]; then
+
+if [[ ! -s ${base_diff} ]]
+then
  echo "${BASELINE_TEST}: PASSED"
+  true
 else
  echo "${BASELINE_TEST}: FAILED"
+  false
 fi
-exit $status
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Try to push to the remote 5 times. If the push fails, and the local and remote
-# have diverged, then pull from the remote to merge changes, and try pushing
-# again. If some other failure happens
-for i in {1..5}; do
-   git push origin master && exit 0
-   # Wait for 20 seconds in case someone else is pushing to the remote
-   # concurrently
-   sleep 20
-   # Fetch any updates from the remote
-   git remote update
-   # Get the latest commit on the local branch
-   LOCAL=$(git rev-parse @)
-   # Get the latest commit on the remote
-   REMOTE=$(git rev-parse @{u})
-   # Get the common ancestor
-   BASE=$(git merge-base @ @{u})
-   # Have the local and remote diverged?
-   if [[ $LOCAL != $REMOTE && $LOCAL != $BASE && $REMOTE != $BASE ]]; then
-      git pull
-      if [[ $? == 0 ]]; then
-         continue
-      else
-         exit 1 # Something else went wrong trying to pull
-      fi
-   fi
-done
-
-exit 1 # Did not succeed in 5 attempts
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -32,7 +32,7 @@ if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
  git pull && \
  git add ${rundir} && \
  git commit -m "${msg}" && \
-  ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+  git push origin master
 else
  for file in ${rundir}/*; do
    echo "------------------------------"
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -29,7 +29,7 @@ if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
  git pull && \
  git add ${rundir} && \
  git commit -m "${msg}" && \
-  ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+  git push origin master
 else
  for file in ${rundir}/*; do
    echo "------------------------------"
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -8,335 +8,31 @@
                               https://mfem.org


-Version 4.7.1 (development)
+Version 4.4.1 (development)
 ===========================

-
-Version 4.7, released on May 7, 2024
-====================================
-
- Added support for single precision (with corresponding hypre build). The MFEM
-  floating point type was generalized from `double` to `real_t`. For details see
-  https://github.com/orgs/mfem/discussions/4207.
-
 Meshing improvements
 --------------------
- Added the capability to partition (big) serial meshes in serial code, see the
-  new classes MeshPartitioner and MeshPart. This capability is also exposed as a
-  menu option in the mesh-explorer miniapp in miniapps/meshing.
-
- Added named attribute sets and basic supporting methods to the Mesh class as a
-  convenient means of referring to sets of domain or boundary attribute numbers.
-  See the new Example 39/39p and data/compass.mesh.
-
- Introduced formulas for refinement of patches in NURBS meshes. Refinement by
-  arbitrary integer factors is also enabled, e.g. in the mesh-explorer miniapp.
-  NURBS coarsening and knot removal are also introduced.
-
- Added support for internal boundary elements in nonconforming meshes.
-
- The ReadCubit Genesis mesh importer has been rewritten to improve readability.
-
-Discretization improvements
---------------------------
- Added a new nonlinear integrator, `HyperbolicFormIntegrator` that implements
-  both element-wise weak divergence and face-wise numerical flux for a general
-  system of hyperbolic conservation laws. To use the integrator for a specific
-  flux function, users can define a derived class of `FluxFunction`. Currently,
-  advection, Burgers, shallow-water and Euler equations (see Example 18/18p) are
-  available.
-
- Added a capability to construct cut-surface and cut-volume IntegrationRules
-  through a moment-fitting approach. The cut is specified by the zero level set
-  of a Coefficient. See fem/intrules_cut.hpp and the new Example 38.
-
- Introduced support for high-order nonconforming Nedelec elements on simplices.
-
-GPU computing
-------------
- Added partial assembly and GPU support for the DG diffusion integrator.
-
- Efficient GPU-accelerated LOR assembly is now supported on surface meshes.
-
- Added functionality to automatically configure hypre's compute policy to match
-  MFEM's compute policy when hypre is built with GPU support. Requires version
-  hypre-2.31.0 or later.
-
- Added support for full assembly on simplices.
-
- Added partial assembly for linear elasticity (no sum factorization for now).
-
- Added functionality for BilinearFormIntegrators to use kernels that work for
-  both tensor and unstructured elements.
-
- The RAJA backend will use `seq_exec` for serial loop execution when RAJA
-  v2023.06.00 and beyond is detected as `loop_exec` is deprecated.
-
- API change: The macro MFEM_HYPRE_FORALL (from hypre.hpp) which was intended
-  for internal use, has been removed and replaced by the function template
-  mfem::hypre_forall in general/forall.hpp.
-
-New and updated examples and miniapps
-------------------------------------
- Added a new miniapp illustrating elastic contact based on the Tribol library,
-  (https://github.com/LLNL/Tribol). See miniapps/tribol.
-
- Added a miniapp to demonstrate low order refined (LOR) block preconditioning
-  for linear elasticity on GPUs. See miniapps/solvers/lor_elast.
-
- Added a new block solver in miniapp/solvers for the Darcy problem. The new
-  solver is based on a Bramble-Pasciak preconditioning. User can use and
-  implement their own preconditioner for the mass matrix.
-
- Added a small miniapp for printing the shape functions of a KnotVector. See
-  miniapps/nurbs/nurbs_printfunc.cpp.
-
- Added two new example codes: 38 and 39/39p described above. Substantially
-  updated Example 18/18p.
-
-Miscellaneous
-------------
- Updated the Doxygen documentation style, which now requires Doxygen version
-  1.9.8 or later. See the doc/ directory.
-
- Improved thread safety for global variables in the library, e.g. for IntRules,
-  RefinedIntRules, GlobGeometryRefiner, and FiniteElement::dof2quad_array.
-
- PETSc integration now generally requires PETSc version 3.21 or later, though
-  depending on the functionality older versions may still work.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-
-Version 4.6, released on September 27, 2023
-===========================================
-
- MFEM is now available in Homebrew and can be installed on a Mac with just
-  "brew install mfem". See https://formulae.brew.sh/formula/mfem.
-
-Meshing improvements
--------------------
- Added asymptotically-balanced TMOP compound metrics 90, 94, 328, 338. A new
-  tool, tmop-metric-magnitude, can be used to track how metrics change under
-  geometric perturbations. See miniapps/tools.
-
- Several NURBS meshing improvements:
-  * Support for free connectivity of NURBS patches allowing for more complex
-    patch configurations such as C-meshes.
-  * New methods to set and get attributes on NURBS patches and patch boundaries.
-  * The edge to knot map for NURBS meshes can be determined automatically. It is
-    no longer needed to specify this in the NURBS mesh.
-  * Added curve interpolation method for NURBS.
-  * See miniapps/nurbs for example meshes and miniapps.
-
-Discretization improvements
---------------------------
- SubMesh and ParSubMesh have been extended to support the transfer of
-  Nedelec and Raviart-Thomas finite element spaces.
-
- Added support for partial assembly on NURBS patches, and NURBS-patch sparse
-  matrix assembly. Patch matrix assembly includes the option to use reduced
-  approximate integration rules, computed by the newly implemented non-negative
-  least-squares (NNLS) solver.
-
- Support for parallel transfer of H1 fields using the low-order refined (LOR)
-  transfer operators in L2ProjectionGridTransfer
-
- Added KDTree class for 2D/3D set of points, which is then utilized in the new
-  KDTreeNodalProjection class to project a function defined on an arbitrary set
-  of points onto an MFEM grid function. This functionality is demonstrated in
-  the nodal-transfer miniapp. The current implementation is serial only. Further
-  extensions can include search in arbitrary dimensional spaces.
-
- Added support for p-refined meshes in GSLIB-FindPoints.
-
- Device kernels can now access device-specific DOF and quadrature limits using
-  the DofQuadLimits structure, allowing increased limits when executing on CPU.
-  The limits for the runtime selected device can be accessed in host code using
-  DeviceDofQuadLimits::Get(). The global constants MAX_D1D and MAX_Q1D are no
-  longer available.
-
- Face restriction operators for Nedelec and Raviart-Thomas finite element
-  spaces are now supported through the ConformingFaceRestriction class.
-
- VectorFEBoundaryFluxLFIntegrator is now supported on device/GPU.
-
-Linear and nonlinear solvers
----------------------------
- Updated the MUMPS interface to support multiple right-hand sides, block
-  low-rank compression, builds using 64-bit integers, and other improvements.
-
- Added an interface to the MKL Pardiso sparse direct solver developed by Intel.
-  The interface provides a serial (OpenMP shared memory) version of Pardiso for
-  use with SparseMatrix. This complements the existing parallel (MPI distributed
-  memory) version already available through the CPardiso MFEM integration.
-
- Added HIP support to the PETSc and SUNDIALS interfaces.
-
-New and updated examples and miniapps
-------------------------------------
- Added a new H(div) solver miniapp demonstrating the use of a matrix-free
-  saddle-point solver methodology, suitable for high-order discretizations and
-  for GPU acceleration. Examples illustrating the solution of Darcy and grad-div
-  problems are included. See miniapps/hdiv-linear-solver.
-
- Added new Discontinuous Petrov-Galerkin (DPG) miniapp which includes serial
-  and parallel examples for diffusion, convection-diffusion, acoustics and
-  Maxwell equations. The miniapp includes new classes such as (Par)DPGWeakForm,
-  (Par)ComplexDPGWeakForm and (Complex)BlockStaticCondensation. Three new
-  integrators are added in support of DPG systems: TraceIntegrator,
-  NormalTraceIntegrator and TangentTraceIntegrator. See miniapps/dpg.
-
- Added a new miniapp that implements the SPDE method for generating Gaussian
-  random fields of Matern covariance. The resulting random field can be used,
-  e.g., to model material uncertainties. See miniapps/spde.
-
- Added a new parallel LOR transfer miniapp, plor-transfer, which mirrors the
-  functionality of the serial LOR transfer miniapp. See miniapps/tools.
-
- New serial miniapp, nodal-transfer, demonstrating the use of KDTree to map a
-  parallel grid function to a different parallel partitioning of the same mesh.
-
- Added 3 additional TMOP miniapps in miniapps/meshing:
-  * Mesh-Quality evaluates quality using size, skewness, and aspect-ratio
-    computed from the Jacobian of the transformation.
-  * Mesh-Fitting can be used for interface and boundary fitting to implicit
-    domains defined using level-set functions.
-  * Fit-Node-Position fits selected mesh nodes to specified positions, while
-    maintaining overall mesh quality.
-
- Added 4 new example codes:
-  * Example 34/34p solves a simple magnetostatic problem where source terms and
-    boundary conditions are transferred with SubMesh objects.
-  * Example 35p implements H1, H(curl) and H(div) variants of a damped harmonic
-    oscillator with field transfer using SubMesh objects.
-  * Example 36/36p demonstrates the solution of the obstacle problem with a new
-    finite element method (proximal Galerkin).
-  * Example 37/37p demonstrates topology optimization with MFEM.
-
- Added a random refinement option to the mesh-explorer miniapp to assist users
-  in experimenting with nonconforming meshes.
-
- Moved the distance solver methods from miniapps/shifted to miniapps/common.
-
-Miscellaneous
-------------
- Improved lambda body debugging with the addition of mfem::forall functions.
-  These functions can take the place of the MFEM_FORALL macros, which have been
-  preserved for backwards compatibility.
-
- Added an address sanitizer GitHub action for a serial build/test on Ubuntu,
-  based on Clang/LLVM (https://clang.llvm.org/docs/AddressSanitizer.html).
-
- Reorganized files for bilinear form, linear form, and nonlinear form integrators
-  in the fem/integ/ subdirectory.
-
- FiniteElementSpace::GetFE has been updated to abort instead of returning NULL for
-  an empty partition.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-
-Version 4.5.2, released on March 23, 2023
-=========================================
-
- Added support for pyramids in non-conforming meshes. Currently only isotropic
-  refinement is supported in this case.
-
- Removed the support for the Mesquite toolkit. We recommend using MFEM's TMOP
-  functionality instead for mesh optimization. See the mesh-optimizer miniapp.
-
- Added a fast normalization-based distance solver, see the Distance miniapp
-  in the miniapps/shifted/ directory.
-
- Added a new meshing miniapp, Reflector, which reflects a high-order or NURBS
-  hexahedral mesh about a plane.
-
- Updated logic in FindPointsGSLIB to ignore points found near (but outside) the
-  domain boundary.
-
- Added an option to auto-balance compound TMOP metrics.
-
- Fixed a bug in TMOP metric 301.
-
- When using discontinuous (L2) spaces, use local (element-wise) L2 projection
-  as the coarsening operator for non-conforming AMR meshes.
-
- Added support for GridFunction::GetGradients() and GetVectorGradient() on
-  face-neighbor elements.
-
- Added support for pyramids in Gmsh meshes.
-
- The Mesh Explorer miniapp can now save mesh files in the VisIt or ParaView
-  formats using the corresponding DataCollection. See option 'D' in the menu.
-
- VisItDataCollection now correctly handles data collection names containing
-  underscores.
-
- Added support for shared Windows builds with MSVC through CMake.
-  Developers note: this enhancement is facilitated by the addition of the macro
-  MFEM_EXPORT, see config.hpp for more details on its usage.
-
- The following integrations have updated minimum version requirements:
-  * RAJA >= 2022.10.3
-
-API changes
-----------
- The implicit cast methods of class Vector to 'double *' and 'const double *'
-  have been deprecated and generate deprecation warnings if used. They will be
-  removed in a future release.
-
- The methods Mesh::GetFaceBaseGeometry and Mesh::GetFaceGeometryType have been
-  deprecated, and Mesh::GetFaceGeometry (which provides identical functionality)
-  should be used instead.
-
- VisItDataCollection::SetPadDigits() no longer alters the number of digits
-  used to represent the MPI rank because VisIt seems to require 6 digits.
-  This parameter can still be explicitly overridden with SetPadDigitsRank().
-
-
-Version 4.5, released on October 22, 2022
-=========================================
-
-Meshing improvements
--------------------
- Added new SubMesh and ParSubMesh classes that can be used to extract a subset
-  of a given Mesh. These classes have the same functionality as Mesh and ParMesh
-  and work with all existing MFEM interfaces like finite element spaces etc.
-
- Added a method, ParMesh::GetSerialMesh(), that reconstructs a partitioned
-  parallel mesh on a given single rank. Also, added ParMesh::PrintAsSerial(),
-  which saves the reconstructed serial mesh to a C++ stream on rank 0.
-
- Added more 3D TMOP metrics, as well as specialized metrics for mesh
-  untangling and worst-case quality improvement.
-
- Added a new method, Mesh::NodesUpdated, which should be called after the mesh
-  node coordinates have changed, e.g. after the mesh has moved. This is
-  necessary, for example, with device assembly of linear and bilinear forms.
-
 - Added support for mixed meshes and pyramids in GSLIB-FindPoints.

 Discretization improvements
 ---------------------------
+- Added support for assembling low-order-refined matrices using a GPU-enabled
+  "batched" algorithm. The lor_solvers and plor_solvers now fully support GPU
+  acceleration.
+
+- Added support for partial assembly and fully matrix-free operators on mixed
+  meshes (different element types and p-adaptivity) through libCEED, including
+  device acceleration, e.g. with NVIDIA and AMD GPUs. The p-adaptivity is
+  currently limited by MFEM capabilities, i.e. 2D serial meshes. All mixed
+  element topologies are supported in serial and parallel: segment, triangle,
+  square, tetrahedron, cube, prism, and pyramid.
+
 - Added full assembly and device support for several LinearForm integrators:
  * DomainLF: (f, v)
  * VectorDomainLF: ((f1,...,fn), (v1,...,vn))
  * DomainLFGrad: (f, grad(v))
  * VectorDomainLFGrad: ((f1x,f1y,f1z,...,fnx,fny,fnz), grad(v1,...,vn))
-  The device assembly of linear forms has to be explicitly enabled by calling
-  LinearForm::UseFastAssembly(true), otherwise the legacy linear form assembly
-  is used by default.
-
- Added support for assembling low-order-refined matrices using a GPU-enabled
-  "batched" algorithm. The lor_solvers and plor_solvers now fully support GPU
-  acceleration with arbitrary user-supplied coefficients.
-
- Added a new class FaceQuadratureSpace that allows for the construction of
-  QuadratureFunctions on the interior or boundary faces of a mesh.
-
- Added a class CoefficientVector for efficient access of variable coefficient
-  values at quadrature points (in particular for GPU/device kernels).

 - Added WhiteGaussianNoiseDomainLFIntegrator: a LinearFormIntegrator class for
  spatial Gaussian white noise.
@@ -344,25 +40,8 @@ Discretization improvements
 - Added a new Zienkiewicz-Zhu patch recovery-based a posteriori error estimator.
  See fem/estimators.hpp.

- Various fixes and improvements in LinearFormExtension.
-
 Linear and nonlinear solvers
 ----------------------------
- Added a new class DGMassInverse that performs a local element-wise CG
-  iteration to solve systems involving the discontinuous Galerkin mass matrix,
-  including support for device/GPU acceleration.
-
- Added more flexibility to the constrained solver classes:
-  * PenaltyConstrainedSolver now allows for a vector of penalty parameters
-    (necessary for penalty contact)
-  * PenaltyConstrainedSolver and EliminationSolver can use GMRES or PCG
-  * All constraint solver classes can take a user-defined preconditioner
-
- - Added functions to toggle additional options for the SuperLU_Dist and Hypre
-   preconditioners (ParaSails, Euclid, ILU).
-
- Added boundary elimination with device support for `SparseMatrix` and
-  `HypreParMatrix`.

 New and updated examples and miniapps
 -------------------------------------
@@ -372,28 +51,12 @@ New and updated examples and miniapps
  automatic differentiation tools like a native dual number implementation or a
  third party library such as Enzyme. See miniapps/elasticity for more details.

- Added example for body-fitted volumetric and shape integration using the
-  Algoim library in miniapps/shifted.
-
 - Add a new example code, Example 33/33p, to demonstrate the solution of
  spectral fractional PDEs with MFEM.

 Integrations, testing and documentation
 ---------------------------------------
 - Added a Dockerfile for a simple MFEM container, see config/docker/README.md.
-  More sophisticated developer containers are available in the new repo
-  https://github.com/mfem/containers.
-
- Added support for the LLVM-based automatic differentiation tool Enzyme, see
-  https://github.com/EnzymeAD/Enzyme. Build system flags and a convenience
-  header are provided. The functionality and interaction are demonstrated in a
-  new miniapp in miniapps/elasticity.
-
- Added support for partial assembly and fully matrix-free operators on mixed
-  meshes (different element types and p-adaptivity) through libCEED, including
-  device acceleration, e.g. with NVIDIA and AMD GPUs. The p-adaptivity is
-  currently limited to 2D serial meshes. All mixed element topologies are
-  supported in both serial and parallel.

 - Added support for ParMoonolith, https://bitbucket.org/zulianp/par_moonolith,
  which provides parallel non-conforming, non-matching, variational, volumetric
@@ -401,40 +64,29 @@ Integrations, testing and documentation
  between arbitrarily distributed and unrelated finite element meshes in a
  variationally consistent way.

- Fully encapsulated SUNDIALS `N_Vector` object within the `SundialsNVector`
-  class by removing deprecated (e.g. `HypreParVector::ToNVector`) and
-  non-deprecated (e.g. `Vector::ToNVector`) functions in other classes.
+- Added support for the LLVM-based automatic differentiation tool Enzyme, see
+  https://github.com/EnzymeAD/Enzyme. Build system flags and a convenience
+  header are provided. The functionality and interaction are demonstrated in a
+  new miniapp in miniapps/elasticity.

- New benchmark for the different assembly levels inspired by the CEED
-  Bake-Off Problems, see tests/benchmarks/bench_assembly_levels.cpp.
+- Added example for body-fitted volumetric and shape integration using the
+  Algoim library.

 - Added Windows 2022 CI testing with GitHub actions.

 Miscellaneous
 -------------
- The method SparseMatrix::EnsureMultTranspose() is now automatically called
-  by the methods AddMultTranspose(), MultTranspose(), and AbsMultTranspose().
-  Added a method with the same name to class HypreParMatrix which is also called
-  automatically by the HypreParMatrix::MultTranspose() methods.
+- Various other simplifications, extensions, and bugfixes in the code.

- Updated various MemoryUsage methods to return 'std::size_t' instead of 'long'
-  since the latter is 32-bit in Win64 builds.

+- Added boundary elimination with device support for `SparseMatrix` and
+  `HypreParMatrix`.
+  
 - When using `AssemblyLevel::FULL`, `FABilinearFormExtension::FormSystemMatrix`
  outputs an `OperatorHandle` containing a `SparseMatrix` in serial, and an
  `HypreParMatrix` in parallel (instead of a `ConstrainedOperator`).

- In various places in the library, replace the use of 'long' with 'long long'
-  to better support Win64 builds where 'long' is 32-bit and 'long long' is
-  64-bit. On Linux and MacOS, both types are typically 64-bit.
-
- The behavior of GridFunction::GetTrueVector() has been changed to not return
-  an empty true vector.
-
- Added support for ordering search points byVDIM in FindPointsGSLIB.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
+- Added TMOP metrics for mesh untangling and worst-case quality improvement.

 Version 4.4, released on March 21, 2022
 =======================================
@@ -467,6 +119,11 @@ Meshing improvements
 - Added a simpler interface to access mesh face information, see FaceInformation
  and GetFaceInformation in the Mesh class.

+- Added the method ParMesh::GetSerialMesh() that reconstructs a partitioned
+  parallel mesh on a given single rank. Also, added the method
+  ParMesh::PrintAsSerial() that saves the reconstructed serial mesh to a C++
+  stream on rank 0.
+
 - Gmsh meshes where all elements have zero physical tag (the default Gmsh output
  format if no physical groups are defined) are now successfully loaded, and
  elements are reassigned attribute number 1.
@@ -556,6 +213,9 @@ Integrations, testing and documentation
 - Switched from Artistic Style (astyle) version 2.05.1 to version 3.1 for code
  formatting. See the "make style" target.

+- New benchmark for the different assembly levels inspired by the CEED
+  Bake-Off Problems, see tests/benchmarks/bench_assembly_levels.cpp.
+
 Miscellaneous
 -------------
 - Added a simple singleton class, Mpi, as a replacement for MPI_Session. New
@@ -566,6 +226,13 @@ Miscellaneous

 - Fixed several MinGW build issues on Windows.

+- In various places in the library, replace the use of 'long' with 'long long'
+  to better support Win64 builds where 'long' is 32-bit and 'long long' is
+  64-bit. On Linux and MacOS, both types are typically 64-bit.
+
+- Update various "MemoryUsage" methods to return 'std::size_t' instead of 'long'
+  since the latter is 32-bit in Win64 builds.
+
 - Added 'double' atomicAdd implementation for previous versions of CUDA.

 - HypreParVector and Vector now support C++ move semantics, and the copy
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -10,27 +10,20 @@
 # CONTRIBUTING.md for details.

 # The variable CMAKE_CXX_STANDARD and related were introduced in CMake v3.1
-# Version 3.8 fixes the handling of CMAKE_CXX_STANDARD for try_compile.
-# Version 3.8 or newer is required for direct CUDA support.
-cmake_minimum_required(VERSION 3.8)
-message(STATUS "CMake version: ${CMAKE_VERSION}")
+cmake_minimum_required(VERSION 3.1)
 set(USER_CONFIG "${CMAKE_CURRENT_SOURCE_DIR}/config/user.cmake" CACHE PATH
  "Path to optional user configuration file.")

 # Require C++11 and disable compiler-specific extensions
-set(CMAKE_CXX_STANDARD 11 CACHE STRING "C++ standard to use.")
-set(CMAKE_CXX_STANDARD_REQUIRED ON CACHE BOOL
-  "Force the use of the chosen C++ standard.")
-set(CMAKE_CXX_EXTENSIONS OFF CACHE BOOL "Enable C++ standard extensions.")
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+set(CMAKE_CXX_EXTENSIONS OFF)

 # Load user settings before the defaults - this way the defaults will not
 # overwrite the user set options. If the user has not set all options, we still
 # have the defaults.
-include("${USER_CONFIG}" OPTIONAL RESULT_VARIABLE USER_CONFIG_LOADED)
-if (USER_CONFIG_LOADED)
-  set(USER_CONFIG_LOADED "LOADED")
-endif()
-message(STATUS "Loading USER_CONFIG = ${USER_CONFIG} (${USER_CONFIG_LOADED})")
+message(STATUS "(optional) USER_CONFIG = ${USER_CONFIG}")
+include("${USER_CONFIG}" OPTIONAL)
 include("${CMAKE_CURRENT_SOURCE_DIR}/config/defaults.cmake")

 # Allow overwriting of the compiler by setting CXX/MPICXX on the command line or
@@ -58,7 +51,7 @@ project(mfem NONE)
 # Current version of MFEM, see also `makefile`.
 #   mfem_VERSION = (string)
 #   MFEM_VERSION = (int)   [automatically derived from mfem_VERSION]
-set(${PROJECT_NAME}_VERSION 4.7.1)
+set(${PROJECT_NAME}_VERSION 4.4.1)

 # Prohibit in-source build
 if (${PROJECT_SOURCE_DIR} STREQUAL ${PROJECT_BINARY_DIR})
@@ -73,7 +66,8 @@ set(XSDK_ENABLE_C OFF)
 set(XSDK_ENABLE_Fortran OFF)

 # Check if we need to enable C or Fortran.
-if (MFEM_USE_CONDUIT OR
+if (CMAKE_VERSION VERSION_LESS 3.2 OR
+    MFEM_USE_CONDUIT OR
    MFEM_USE_SIDRE OR
    MFEM_USE_PETSC)
   # This seems to be needed by:
@@ -83,19 +77,12 @@ if (MFEM_USE_CONDUIT OR
   #  * find_package(PETSc REQUIRED)
   set(XSDK_ENABLE_C ON)
 endif()
-if (MFEM_USE_STRUMPACK OR MFEM_USE_MUMPS)
+if (MFEM_USE_STRUMPACK)
  # Just needed to find the MPI_Fortran libraries to link with
  set(XSDK_ENABLE_Fortran ON)
 endif()
-# SUNDIALS, STRUMPACK, Ginkgo, Tribol, RAJA and Umpire require C++14:
-if ((MFEM_USE_SUNDIALS OR
-     MFEM_USE_STRUMPACK OR
-     MFEM_USE_GINKGO OR
-     MFEM_USE_TRIBOL OR
-     MFEM_USE_RAJA OR
-     MFEM_USE_UMPIRE) AND
-    ("${CMAKE_CXX_STANDARD}" LESS "14"))
-  set(CMAKE_CXX_STANDARD 14 CACHE STRING "C++ standard to use." FORCE)
+if (MFEM_USE_GINKGO AND ("${CMAKE_CXX_STANDARD}" LESS "14"))
+  set(CMAKE_CXX_STANDARD 14)
 endif()

 # Include xSDK default CMake file.
@@ -106,23 +93,25 @@ enable_language(CXX)
 if (MINGW)
   # MinGW GCC does not expose the functions jn/_jn, yn/_yn (used in Example
   # 25/25p) unless we use '-std=gnu++11':
-   set(CMAKE_CXX_EXTENSIONS ON
-      CACHE BOOL "Enable C++ standard extensions." FORCE)
+   set(CMAKE_CXX_EXTENSIONS ON)
 endif()
 if (MFEM_USE_CUDA)
   if (MFEM_USE_HIP)
      message(FATAL_ERROR " *** MFEM_USE_HIP cannot be combined with MFEM_USE_CUDA.")
   endif()
+   # MFEM_USE_CUDA requires CMake 3.8 or newer (for direct CUDA support)
+   cmake_minimum_required(VERSION 3.8 FATAL_ERROR)
   # Use ${CMAKE_CXX_COMPILER} as the cuda host compiler.
   if (NOT CMAKE_CUDA_HOST_COMPILER)
      set(CMAKE_CUDA_HOST_COMPILER ${CMAKE_CXX_COMPILER})
   endif()
   enable_language(CUDA)
-   set(CMAKE_CUDA_STANDARD ${CMAKE_CXX_STANDARD} CACHE STRING
-      "CUDA standard to use.")
-   set(CMAKE_CUDA_STANDARD_REQUIRED ON CACHE BOOL
-      "Force the use of the chosen CUDA standard.")
-   set(CMAKE_CUDA_EXTENSIONS OFF CACHE BOOL "Enable CUDA standard extensions.")
+   set(CMAKE_CUDA_STANDARD 11)
+   if (MFEM_USE_GINKGO)
+     set(CMAKE_CUDA_STANDARD 14)
+   endif()
+   set(CMAKE_CUDA_STANDARD_REQUIRED ON)
+   set(CMAKE_CUDA_EXTENSIONS OFF)
   set(CUDA_FLAGS "--expt-extended-lambda")
   if (CMAKE_VERSION VERSION_LESS 3.18.0)
      set(CUDA_FLAGS "-arch=${CUDA_ARCH} ${CUDA_FLAGS}")
@@ -143,10 +132,12 @@ if (MFEM_USE_CUDA)
      set(CUDA_FLAGS "-ccbin=${CMAKE_CXX_COMPILER} ${CUDA_FLAGS}")
      set(CMAKE_CUDA_HOST_LINK_LAUNCHER ${CMAKE_CXX_COMPILER})
   endif()
-   set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} ${CUDA_FLAGS}")
-   find_package(CUDAToolkit REQUIRED)
+   set(CMAKE_CUDA_FLAGS "${CUDA_FLAGS}" CACHE STRING
+       "CUDA flags set for MFEM" FORCE)
   set(CUSPARSE_FOUND TRUE)
-   get_target_property(CUSPARSE_LIBRARIES CUDA::cusparse LOCATION)
+   set(CUSPARSE_LIBRARIES "cusparse")
+   set(CUBLAS_FOUND TRUE)
+   set(CUSBLAS_LIBRARIES "cublas")
 endif()

 if (XSDK_ENABLE_C)
@@ -184,19 +175,6 @@ endif()
 # Process configuration options
 #-------------------------------------------------------------------------------

-# MFEM_PRECISION -> MFEM_USE_SINGLE, MFEM_USE_DOUBLE
-if (MFEM_PRECISION MATCHES "^(double|Double|DOUBLE)$")
-  set(MFEM_USE_SINGLE OFF)
-  set(MFEM_USE_DOUBLE ON)
-elseif (MFEM_PRECISION MATCHES "^(single|Single|SINGLE)$")
-  set(MFEM_USE_SINGLE ON)
-  set(MFEM_USE_DOUBLE OFF)
-else()
-  message(FATAL_ERROR " *** Invalid floating-point precision: "
-    "MFEM_PRECISION = ${MFEM_PRECISION}")
-endif()
-message(STATUS "Floating-point precision: MFEM_PRECISION = ${MFEM_PRECISION}")
-
 # MFEM_DEBUG
 if (CMAKE_BUILD_TYPE MATCHES "Debug|debug|DEBUG")
  set(MFEM_DEBUG ON)
@@ -204,23 +182,6 @@ else()
  set(MFEM_DEBUG OFF)
 endif()

-# Shared build on Windows
-if (WIN32 AND BUILD_SHARED_LIBS)
-  # CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS works only with MSVC?
-  set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS ON CACHE BOOL
-      "Automatically export symbols for shared Windows DLL build")
-  # Place all .dll and .exe files in the same sub-directory, 'bin/<config>', of
-  # the build directory, so that the .exe files can find the .dll files at
-  # runtime:
-  set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin")
-  # Note: CMake tests are run from the build-tree sub-directory where the test
-  # is defined, e.g. <build-dir>/tests/unit, so hard coded paths to meshes still
-  # work fine.
-  # Not strictly necessary:
-  # set(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib")
-  # set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib")
-endif()
-
 # AMD HIP
 if (MFEM_USE_HIP)
  if (HIP_ARCH)
@@ -234,35 +195,15 @@ if (MFEM_USE_HIP)
  find_package(HIPSPARSE REQUIRED)
 endif()

-# OpenMP
-if (MFEM_USE_OPENMP OR MFEM_USE_LEGACY_OPENMP)
-  if (NOT MFEM_THREAD_SAFE AND MFEM_USE_LEGACY_OPENMP)
-    message(FATAL_ERROR " *** MFEM_USE_LEGACY_OPENMP requires MFEM_THREAD_SAFE=ON.")
-  endif()
-  find_package(OpenMP REQUIRED)
-  set(OPENMP_LIBRARIES ${OpenMP_CXX_LIBRARIES})
-  if(APPLE)
-    # On macOS, the compiler needs additional help to find the <omp.h> header.
-    # See issue #2642 for more information.
-    set(OPENMP_INCLUDE_DIRS ${OpenMP_CXX_INCLUDE_DIRS})
-  endif(APPLE)
-  if (OPENMP_FOUND)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_CXX_FLAGS}")
-    if (MFEM_USE_CUDA)
-      set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} -Xcompiler=${OpenMP_CXX_FLAGS}")
-    endif()
-  endif()
-endif()
-
 # MPI -> hypre; PETSc (optional)
 if (MFEM_USE_MPI)
  find_package(MPI REQUIRED)
  set(MPI_CXX_INCLUDE_DIRS ${MPI_CXX_INCLUDE_PATH})
  if (MFEM_MPIEXEC)
-    string(REPLACE " " ";" MPIEXEC ${MFEM_MPIEXEC})
+    set(MPIEXEC ${MFEM_MPIEXEC})
  endif()
  if (MFEM_MPIEXEC_NP)
-    string(REPLACE " " ";" MPIEXEC_NUMPROC_FLAG ${MFEM_MPIEXEC_NP})
+    set(MPIEXEC_NUMPROC_FLAG ${MFEM_MPIEXEC_NP})
  endif()
  # Parallel MFEM depends on hypre
  find_package(HYPRE REQUIRED)
@@ -319,6 +260,20 @@ if (MFEM_USE_LAPACK)
  find_package(LAPACK REQUIRED)
 endif()

+# OpenMP
+if (MFEM_USE_OPENMP OR MFEM_USE_LEGACY_OPENMP)
+  if (NOT MFEM_THREAD_SAFE AND MFEM_USE_LEGACY_OPENMP)
+    message(FATAL_ERROR " *** MFEM_USE_LEGACY_OPENMP requires MFEM_THREAD_SAFE=ON.")
+  endif()
+  find_package(OpenMP REQUIRED)
+  set(OPENMP_LIBRARIES ${OpenMP_CXX_LIBRARIES})
+  if(APPLE)
+    # On macOS, the compiler needs additional help to find the <omp.h> header.
+    # See issue #2642 for more information.
+    set(OPENMP_INCLUDE_DIRS ${OpenMP_CXX_INCLUDE_DIRS})
+  endif(APPLE)
+endif()
+
 # SuiteSparse (before SUNDIALS which may depend on KLU)
 if (MFEM_USE_SUITESPARSE)
  find_package(SuiteSparse REQUIRED
@@ -334,12 +289,14 @@ if (MFEM_USE_SUNDIALS)
  if (MFEM_USE_CUDA)
    list(APPEND SUNDIALS_COMPONENTS NVector_Cuda)
  endif()
-  if (MFEM_USE_HIP)
-    list(APPEND SUNDIALS_COMPONENTS NVector_Hip)
-  endif()
  find_package(SUNDIALS REQUIRED ${SUNDIALS_COMPONENTS})
 endif()

+# Mesquite
+if (MFEM_USE_MESQUITE)
+  find_package(Mesquite REQUIRED)
+endif()
+
 # SuperLU_DIST can only be enabled in parallel
 if (MFEM_USE_SUPERLU)
  if (MFEM_USE_MPI)
@@ -353,7 +310,6 @@ endif()
 if (MFEM_USE_MUMPS)
  if (MFEM_USE_MPI)
    find_package(MUMPS REQUIRED mumps_common pord)
-    set(MFEM_MUMPS_VERSION ${MUMPS_VERSION})
  else()
    message(FATAL_ERROR " *** MUMPS requires that MPI be enabled.")
  endif()
@@ -487,32 +443,17 @@ if (MFEM_USE_ADIOS2)
   find_package(ADIOS2 REQUIRED)
 endif()

-# MKL CPardiso
 if (MFEM_USE_MKL_CPARDISO)
  if (MFEM_USE_MPI)
   find_package(MKL_CPARDISO REQUIRED MKL_SEQUENTIAL MKL_LP64 MKL_MPI_WRAPPER)
  endif()
 endif()

-# MKL Pardiso
-if (MFEM_USE_MKL_PARDISO)
-   find_package(MKL_PARDISO REQUIRED MKL_SEQUENTIAL MKL_LP64)
-endif()
-
 # PARELAG
 if (MFEM_USE_PARELAG)
   find_package(PARELAG REQUIRED)
 endif()

-# Tribol
-if (MFEM_USE_TRIBOL)
-  if (MFEM_USE_MPI)
-    find_package(Tribol REQUIRED tribol redecomp)
-  else()
-    message(FATAL_ERROR " *** Tribol requires that MPI be enabled.")
-  endif()
-endif()
-
 # Enzyme
 if (MFEM_USE_ENZYME)
   find_package(ENZYME REQUIRED)
@@ -536,29 +477,16 @@ if (NOT DEFINED MFEM_TIMER_TYPE)
  endif()
 endif()

-# Without this, CMake 3.21.1 (and 3.20.2) run into CMake Errors like the following:
-# CMake Error at config/cmake/modules/MfemCmakeUtilities.cmake:60 (add_library):
-#   Target "mfem" links to target "Threads::Threads" but the target was not
-#   found.  Perhaps a find_package() call is missing for an IMPORTED target, or
-#   an ALIAS target is missing?
-# Call Stack (most recent call first):
-#   CMakeLists.txt:474 (mfem_add_library)
-#
-# NOTE: We need to figure out which TPL library adds the dependency on
-#       "Threads::Threads" and call the next line only when that TPL library is
-#       enabled.  -V. Dobrev
-find_package(Threads REQUIRED)
-
 # List all possible libraries in order of dependencies.
 # [METIS < SuiteSparse]:
 #    With newer versions of SuiteSparse which include METIS header using 64-bit
 #    integers, the METIS header (with 32-bit indices, as used by mfem) needs to
 #    be before SuiteSparse.
-set(MFEM_TPLS OPENMP HYPRE LAPACK BLAS SuperLUDist STRUMPACK METIS SuiteSparse
-    SUNDIALS PETSC SLEPC MUMPS AXOM FMS CONDUIT Ginkgo GNUTLS GSLIB
+set(MFEM_TPLS OPENMP HYPRE BLAS LAPACK SuperLUDist METIS SuiteSparse SUNDIALS
+    PETSC SLEPC MESQUITE MUMPS STRUMPACK AXOM FMS CONDUIT Ginkgo GNUTLS GSLIB
    NETCDF MPFR PUMI HIOP POSIXCLOCKS MFEMBacktrace ZLIB OCCA CEED RAJA UMPIRE
-    ADIOS2 CUSPARSE MKL_CPARDISO MKL_PARDISO AMGX CALIPER CODIPACK
-    BENCHMARK PARELAG TRIBOL MPI_CXX HIP HIPSPARSE MOONOLITH BLITZ ALGOIM ENZYME)
+    ADIOS2 CUBLAS CUSPARSE MKL_CPARDISO AMGX CALIPER CODIPACK BENCHMARK PARELAG
+    MPI_CXX HIP HIPSPARSE MOONOLITH BLITZ ALGOIM ENZYME)

 # Add all *_FOUND libraries in the variable TPL_LIBRARIES.
 set(TPL_LIBRARIES "")
@@ -570,13 +498,18 @@ foreach(TPL IN LISTS MFEM_TPLS)
    list(APPEND TPL_INCLUDE_DIRS ${${TPL}_INCLUDE_DIRS})
  endif()
 endforeach(TPL)
-list(REVERSE TPL_LIBRARIES)
 list(REMOVE_DUPLICATES TPL_LIBRARIES)
-list(REVERSE TPL_LIBRARIES)
 list(REMOVE_DUPLICATES TPL_INCLUDE_DIRS)
 # message(STATUS "TPL_INCLUDE_DIRS = ${TPL_INCLUDE_DIRS}")

-message(STATUS "MFEM shared library: BUILD_SHARED_LIBS = ${BUILD_SHARED_LIBS}")
+if (OPENMP_FOUND)
+  message(STATUS "MFEM: using package OpenMP")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_CXX_FLAGS}")
+  if (MFEM_USE_CUDA)
+    set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} -Xcompiler=${OpenMP_CXX_FLAGS}")
+  endif()
+endif()
+
 message(STATUS "MFEM build type: CMAKE_BUILD_TYPE = ${CMAKE_BUILD_TYPE}")
 message(STATUS "MFEM version: v${MFEM_VERSION_STRING}")
 message(STATUS "MFEM git string: ${MFEM_GIT_STRING}")
@@ -632,19 +565,7 @@ target_include_directories(mfem
  PUBLIC
    $<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}>
    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
-    # The INSTALL_INTERFACE is handled below
    ${TPL_INCLUDE_DIRS})
-if (MFEM_USE_MPI)
-  if (MPI_CXX_COMPILE_FLAGS)
-    separate_arguments(MPI_CXX_COMPILE_ARGS UNIX_COMMAND
-      "${MPI_CXX_COMPILE_FLAGS}")
-    target_compile_options(mfem PUBLIC ${MPI_CXX_COMPILE_ARGS})
-  endif()
-  if (MPI_CXX_LINK_FLAGS)
-    target_link_libraries(mfem PUBLIC ${MPI_CXX_LINK_FLAGS})
-  endif()
-endif()
-
 set_target_properties(mfem PROPERTIES VERSION "${mfem_VERSION}")
 set_target_properties(mfem PROPERTIES SOVERSION "${mfem_VERSION}")

@@ -656,7 +577,6 @@ if (NOT ("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}"))
 endif()

 # Generate configuration file in the build directory: config/_config.hpp.
-set(MFEM_SHARED_BUILD ${BUILD_SHARED_LIBS})
 configure_file(
  "${PROJECT_SOURCE_DIR}/config/cmake/config.hpp.in"
  "${PROJECT_BINARY_DIR}/config/_config.hpp")
@@ -667,34 +587,16 @@ if (NOT ("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}"))
  foreach(Header mfem.hpp mfem-performance.hpp)
    message(STATUS
      "Writing substitute header --> \"${Header}\"")
-    file(WRITE "${PROJECT_BINARY_DIR}/${Header}.tmp"
+    file(WRITE "${PROJECT_BINARY_DIR}/${Header}"
 "// Auto-generated file.
 #define MFEM_CONFIG_FILE \"${PROJECT_BINARY_DIR}/config/_config.hpp\"
 #include \"${PROJECT_SOURCE_DIR}/${Header}\"
 ")
-
-    execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different 
-      "${PROJECT_BINARY_DIR}/${Header}.tmp"
-      "${PROJECT_BINARY_DIR}/${Header}"
-    )
-    execute_process(COMMAND ${CMAKE_COMMAND} -E remove
-      "${PROJECT_BINARY_DIR}/${Header}.tmp"
-    )
-
    # This version will be installed in the top include directory:
-    file(WRITE "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
+    file(WRITE "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}"
 "// Auto-generated file.
 #include \"mfem/${Header}\"
 ")
-
-    execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different 
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}"
-    )
-    execute_process(COMMAND ${CMAKE_COMMAND} -E remove
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
-    )
-
  endforeach()
 endif()

@@ -786,15 +688,13 @@ add_subdirectory(doc)
 message(STATUS "CMAKE_INSTALL_PREFIX = ${CMAKE_INSTALL_PREFIX}")
 set(INSTALL_INCLUDE_DIR include
  CACHE PATH "Relative path for installing header files.")
-set(INSTALL_BIN_DIR bin
-  CACHE PATH "Relative path for installing the binaries.")
 set(INSTALL_LIB_DIR lib
  CACHE PATH "Relative path for installing the library.")
 # other options: "share/mfem/cmake", "lib/mfem/cmake"
 set(INSTALL_CMAKE_DIR lib/cmake/mfem
  CACHE PATH "Relative path for installing cmake config files.")

-target_include_directories(mfem BEFORE
+target_include_directories(mfem
  PUBLIC
    $<INSTALL_INTERFACE:${INSTALL_INCLUDE_DIR}>)

@@ -806,9 +706,7 @@ set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME Development)
 # Install the library
 install(TARGETS ${PROJECT_NAME}
  EXPORT ${PROJECT_NAME_UC}Targets
-  RUNTIME DESTINATION ${INSTALL_BIN_DIR}
-  LIBRARY DESTINATION ${INSTALL_LIB_DIR}
-  ARCHIVE DESTINATION ${INSTALL_LIB_DIR})
+  DESTINATION ${INSTALL_LIB_DIR})

 # Install the master headers
 foreach(Header mfem.hpp mfem-performance.hpp)
@@ -846,8 +744,10 @@ endif()

 # Install the configuration header files
 install(FILES ${PROJECT_BINARY_DIR}/config/_config.hpp
-  ${PROJECT_SOURCE_DIR}/config/config.hpp
-  ${PROJECT_SOURCE_DIR}/config/tconfig.hpp
+  DESTINATION ${INSTALL_INCLUDE_DIR}/mfem/config
+  RENAME config.hpp)
+
+install(FILES ${PROJECT_SOURCE_DIR}/config/tconfig.hpp
  DESTINATION ${INSTALL_INCLUDE_DIR}/mfem/config)

 # Package the whole thing up nicely
@@ -102,9 +102,7 @@ The MFEM source code has the following structure:
  .
  ├── config
  │   ├── cmake
-  │   ├── docker
-  │   ├── githooks
-  │   └── vcpkg
+  │   └── githooks
  ├── data
  ├── doc
  ├── examples
@@ -113,7 +111,6 @@ The MFEM source code has the following structure:
  │   ├── ginkgo
  │   ├── hiop
  │   ├── jupyter
-  │   ├── moonolith
  │   ├── petsc
  │   ├── pumi
  │   ├── sundials
@@ -121,38 +118,30 @@ The MFEM source code has the following structure:
  ├── fem
  │   ├── ceed
  │   ├── fe
-  │   ├── integ
-  │   ├── lor
-  │   ├── moonolith
  │   ├── qinterp
+  │   ├── moonolith
  │   └── tmop
  ├── general
  ├── linalg
  │   └── simd
  ├── mesh
-  │   └── submesh
  ├── miniapps
  │   ├── adjoint
  │   ├── autodiff
  │   ├── common
-  │   ├── dpg
  │   ├── electromagnetics
  │   ├── gslib
-  │   ├── hdiv-linear-solver
  │   ├── hooke
  │   ├── meshing
  │   ├── mtop
-  │   ├── multidomain
  │   ├── navier
  │   ├── nurbs
  │   ├── parelag
  │   ├── performance
  │   ├── shifted
  │   ├── solvers
-  │   ├── spde
  │   ├── tools
-  │   ├── toys
-  │   └── tribol
+  │   └── toys
  └── tests
      ├── benchmarks
      ├── convergence
@@ -214,7 +203,7 @@ device/host memory manager.
 - The main device-relevant classes and sources are:
  + [`Device`](https://docs.mfem.org/html/device_8hpp.html)
  + [`MemoryManager`](https://docs.mfem.org/html/mem_manager_8hpp.html)
-  + the [`mfem::forall`](https://docs.mfem.org/html/forall_8hpp.html) function
+  + the [`MFEM_FORALL`](https://docs.mfem.org/html/forall_8hpp.html) macro
  + the [`cuda.hpp`](https://docs.mfem.org/html/cuda_8hpp.html) and [`occa.hpp`](https://docs.mfem.org/html/occa_8hpp.html) files

 #### Utilities, building and documentation
@@ -347,9 +336,6 @@ Before you can start, you need a GitHub account, here are a few suggestions:
 - Code specifics
  - All new public, protected, and private classes, methods, data members, and
    functions have Doxygen-style documentation in source comments.
-  - Math formulas can be included in the Doxygen comments either with standard
-    LaTeX (`$..$` and `$$..$$`) for portions that need detailed explanation, or with
-    [Unicode](https://www.unicodeit.net/) or plain text when short or readable description is preferable.
  - In addition to arguments and functionality, documentation should include the
    current limitations of the code, any background information that is
    implicitly assumed in the implementation, and the ownership and lifetime
@@ -363,8 +349,6 @@ Before you can start, you need a GitHub account, here are a few suggestions:
    conflicted files in the commit message.
  - All significant new features and changes should be documented in CHANGELOG.
  - New examples and miniapps should have documentation on the MFEM webpage.
-  - The general floating-point type `real_t` should be used, rather than
-    `float` or `double`, except in special cases where only one is possible.


 ### Pull Requests
@@ -7,10 +7,6 @@

                               https://mfem.org

-This file provides a detailed description of how to build and install the MFEM
-library. For a simple build, see the step-by-step instructions on the website
-at https://mfem.org/building.
-
 The MFEM library has a serial and an MPI-based parallel version, which largely
 share the same code base. The only prerequisite for building the serial version
 of MFEM is a (modern) C++ compiler, such as g++. The parallel version of MFEM
@@ -20,11 +16,7 @@ requires an MPI C++ compiler, as well as the following external libraries:
  https://github.com/hypre-space/hypre

 - METIS (a family of multilevel partitioning algorithms)
-  https://github.com/mfem/tpls
-
-  Note: We recommend our mirror of metis-4.0.3/5.1.0 above because the METIS
-  webpage, http://glaros.dtc.umn.edu/gkhome/metis/metis/overview, is often down
-  and we don't support yet the new repo https://github.com/KarypisLab/METIS.
+  http://glaros.dtc.umn.edu/gkhome/metis/metis/overview

 The hypre dependency can be downloaded as a tarball from GitHub or from the
 project webpage https://www.llnl.gov/casc/hypre. For example, the 2.24.0 release
@@ -75,8 +67,6 @@ and miniapps. See https://glvis.org and https://mfem.org/building.

 Quick start with GNU make
 =========================
-See also: https://mfem.org/building
-
 Serial build:
   make serial -j 4

@@ -85,7 +75,6 @@ Parallel build:
   (build METIS 4 in ../metis-4.0 relative to mfem/)
   (build hypre in ../hypre relative to mfem/)
   make parallel -j 4
-(For METIS 5, see https://mfem.org/building/#parallel-build-using-metis-5)

 CUDA build:
   make cuda -j 4
@@ -119,7 +108,6 @@ Parallel build:
   mkdir <mfem-build-dir> ; cd <mfem-build-dir>
   cmake <mfem-source-dir> -DMFEM_USE_MPI=YES
   make -j 4
-(For METIS 5, see https://mfem.org/building/#parallel-build-using-metis-5)

 CUDA build:
   (this build requires CMake 3.8 or newer)
@@ -288,15 +276,6 @@ MFEM_USE_METIS = YES/NO
   option in the library will be Cartesian partitioning with box meshes, and
   thus most of the parallel examples and miniapps will fail.

-MFEM_PRECISION = double/Double/DOUBLE/single/Single/SINGLE
-   Use single (float type) or double floating-point precision. In the
-   configuration header 'config/_config.hpp' this option is represented by
-   defining exactly one of the macros: MFEM_USE_DOUBLE, or MFEM_USE_SINGLE.
-   In the exported config files 'config.mk' and 'MFEMConfig.cmake', the option
-   is represented by the variables MFEM_USE_DOUBLE and MFEM_USE_SINGLE defined
-   as YES/NO (make) or ON/OFF (cmake). For more details see
-   https://github.com/orgs/mfem/discussions/4207
-
 MFEM_DEBUG = YES/NO
   Choose debug/optimized build. The debug build enables a number of messages
   and consistency checks that may simplify bug-hunting.
@@ -350,6 +329,10 @@ MFEM_USE_SUNDIALS = YES/NO
   library. When enabled, this option uses the SUNDIALS_* library options,
   see below.

+MFEM_USE_MESQUITE = YES/NO
+   Enable MFEM functionality based on the Mesquite library. When enabled, this
+   option uses the MESQUITE_* library options, see below.
+
 MFEM_USE_SUITESPARSE = YES/NO
   Enable MFEM functionality based on the SuiteSparse library. Currently, this
   option adds the classes UMFPackSolver and KLUSolver (both sparse serial
@@ -489,10 +472,10 @@ MFEM_USE_CODIPACK = YES/NO
  www.scicomp.uni-kl.de/codi/

 MFEM_USE_ALGOIM = YES/NO
-  Enable the usage of Algoim - a collection of high-order accurate numerical
-  methods and C++ algorithms for working with implicitly-defined geometry and
-  level set methods. The Algoim library requires the Blitz++ library. The MFEM
-  provides interface to Algoim v1. Thus, to check out the specific state use:
+  Enable the usage of Algoim - a collection of high-order accurate numerical 
+  methods and C++ algorithms for working with implicitly-defined geometry and 
+  level set methods. The Algoim library requires the Blitz++ library. The MFEM 
+  provides interface to Algoim v1. Thus, to check out the specific state use: 
  git checkout 9c9ca0ef094d8ab0390ed36367a1151b459bbe0a
  https://algoim.github.io

@@ -567,7 +550,7 @@ MFEM_USE_FMS = YES/NO
   Enables support for the FMS library which consists of the DataCollection
   sub-class mfem::FMSDataCollection for I/O in FMS formats, see the header file
   fem/fmsdatacollection.hpp. In addition, this option enables in-memory
-   conversion routines between FMS's FmsDataCollection structure and MFEM's
+   convetion routines between FMS's FmsDataCollection structure and MFEM's
   DataCollection class, see the header file fem/fmsconvert.hpp.

 MFEM_USE_PARELAG = YES/NO
@@ -575,11 +558,6 @@ MFEM_USE_PARELAG = YES/NO
   use ParELAG. In fact, ParELAG is dependent on MFEM. Therefore, this option
   currently only concerns the miniapps.

-MFEM_USE_TRIBOL = YES/NO
-   Enables the miniapps that use the Tribol library. MFEM does not currently
-   use Tribol. In fact, Tribol is dependent on MFEM. Therefore, this option
-   currently only concerns the miniapps.
-
 MFEM_USE_ENZYME = YES/NO
   Enables automatic differentiation support through the LLVM plugin Enzyme.
   This requires the compiler to be set to clang (>=14.0.0). We also advise to
@@ -616,14 +594,10 @@ The specific libraries and their options are:
            HYPRE >= 2.20.0   (HYPRE built with '--enable-mixedint')
            HYPRE >= 2.22.1   (HYPRE built with CUDA)
            HYPRE >= 2.23.0   (HYPRE built with HIP)
-            HYPRE >= 2.31.0   (runtime selectable HYPRE execution on CPU/GPU)

 - METIS, used when MFEM_USE_METIS = YES. If using METIS 5, set
-  MFEM_USE_METIS_5 = YES (default is to use METIS 4). For building instructions,
-  see the following:
-    - METIS 4.0.3: https://mfem.org/building/#parallel-mpi-version-of-mfem
-    - METIS 5.1.0: https://mfem.org/building/#parallel-build-using-metis-5
-  URL: https://github.com/mfem/tpls (MFEM mirror, see above)
+  MFEM_USE_METIS_5 = YES (default is to use METIS 4).
+  URL: http://glaros.dtc.umn.edu/gkhome/metis/metis/overview
  Options: METIS_OPT, METIS_LIB.
  Versions: METIS 4.0.3 or 5.1.0.

@@ -650,13 +624,14 @@ The specific libraries and their options are:
  both MPI and hypre.
  If MFEM_USE_CUDA is enabled, we expect that SUNDIALS is built with support
  for CUDA.
-  If MFEM_USE_HIP is enabled, we expect that SUNDIALS is built with support
-  for HIP.
-  URL: http://computing.llnl.gov/projects/sundials/sundials-software
+  URL: http://computation.llnl.gov/projects/sundials/sundials-software
  Options: SUNDIALS_OPT, SUNDIALS_LIB.
-  Versions: SUNDIALS >= 5.0.0,
-            SUNDIALS >= 5.4.0 for CUDA support, and
-            SUNDIALS >= 5.7.0 for HIP support.
+  Versions: SUNDIALS >= 5.0.0, SUNDIALS >= 5.4.0 for CUDA support.
+
+- Mesquite (optional), used when MFEM_USE_MESQUITE = YES.
+  URL: http://trilinos.org/oldsite/packages/mesquite
+  Options: MESQUITE_OPT, MESQUITE_LIB.
+  The Mesquite support is deprecated and will be removed in the future.

 - SuiteSparse (optional), used when MFEM_USE_SUITESPARSE = YES.
  URL: http://faculty.cse.tamu.edu/davis/suitesparse.html
@@ -681,7 +656,8 @@ The specific libraries and their options are:
  requires the PT-Scotch and Scalapack libraries as well as ParMETIS, which
  includes METIS 5 in its distribution. Starting with STRUMPACK v2.2.0, ParMETIS
  and PT-Scotch are optional dependencies.
-  The support for STRUMPACK was added in MFEM v3.3.2.
+  The support for STRUMPACK was added in MFEM v3.3.2 and it requires STRUMPACK
+  2.0.0 or later.
  URL: http://portal.nersc.gov/project/sparse/strumpack
  Options: STRUMPACK_OPT, STRUMPACK_LIB.
  Versions: STRUMPACK >= 3.0.0.
@@ -714,20 +690,18 @@ The specific libraries and their options are:
  Options: NETCDF_OPT, NETCDF_LIB.
  Versions: NetCDF >= 4.4.0.

- PETSc (optional), used when MFEM_USE_PETSC = YES. Version 3.21 or higher of
-  the PETSC dev branch is required, though depending on the functionality older
-  versions may work too. The MFEM and PETSc builds can share common libraries,
-  e.g., hypre and SUNDIALS. Here's an example configuration, assuming
+- PETSc (optional), used when MFEM_USE_PETSC = YES. Version 3.8 or higher of
+  the PETSC dev branch is required. The MFEM and PETSc builds can share common
+  libraries, e.g., hypre and SUNDIALS. Here's an example configuration, assuming
  PETSc has been cloned on the same level as mfem and hypre:
    ./configure --download-fblaslapack=yes --download-scalapack=yes \
                --download-mumps=yes --download-suitesparse=yes \
-                --with-hypre-dir=../hypre/src/hypre \
+                --with-hypre-dir=../hypre-2.10.0b/src/hypre \
                --with-shared-libraries=0
-  When building PETSc with HIP, one may need to add a flag like -std=c2x to
-  CFLAGS to allow proper parsing of the hipsparse header under C.
  URL: https://www.mcs.anl.gov/petsc
  Options: PETSC_OPT, PETSC_LIB.
-  Versions: PETSc >= 3.21.0, older versions may work too.
+  Versions: PETSc >= 3.8.0   (PETSc build without CUDA)
+            PETSc >= 3.15.0  (PETSc built with CUDA)

 - SLEPc (optional), used when MFEM_USE_SLEPC = YES. SLEPc depends on PETSc and
  uses some of the PETSc options when compiled.
@@ -780,12 +754,12 @@ The specific libraries and their options are:
  Options: GSLIB_OPT, GSLIB_LIB.
  Versions: GSLIB >= 1.0.7.

- ALGOIM (optional), used when MFEM_USE_ALGOIM=YES. The library provides only
+- ALGOIM (optional), used when MFE_USE_ALGOIM=YES. The library provides only
  headers so it just needs to be downloaded at the same level as MFEM. Download
  the specific version we use as:
  "git clone https://github.com/algoim/algoim.git;
   git checkout 9c9ca0ef094d8ab0390ed36367a1151b459bbe0a"
-  ALGOIM depends on BLITZ and the library must be built prior to the MFEM build.
+  ALGOIM depends on BLITZ and rhe library must be built prior to the MFEM build.
  Download v1.0.2, untar it at the same level as MFEM and create a symbolic link:
  "ln -s blitz-1.0.2 blitz".
  Build Blitz using CMake as:
@@ -817,13 +791,13 @@ The specific libraries and their options are:
  URL: https://github.com/CEED/libCEED
       https://ceed.exascaleproject.org/libceed
  Options: CEED_DIR, CEED_OPT, CEED_LIB.
-  Versions: libCEED >= 0.12.
+  Versions: libCEED >= 0.10.

 - RAJA (optional), used when MFEM_USE_RAJA = YES.
-  Beginning with MFEM v4.5.1, only RAJA v2022.10.3+ is supported.
+  Beginning with MFEM v4.3, only RAJA v0.14.0+ is supported.
  URL: https://github.com/LLNL/RAJA
  Options: RAJA_DIR, RAJA_OPT, RAJA_LIB.
-  Versions: RAJA >= 2022.10.3.
+  Versions: RAJA >= 0.14.0.

 - Moonolith (optional), use when MFEM_USE_MOONOLITH = YES.
  URL: https://bitbucket.org/zulianp/par_moonolith
@@ -870,10 +844,6 @@ The specific libraries and their options are:
  URL: https://github.com/LLNL/parelag
  Options: PARELAG_DIR, PARELAG_OPT, PARELAG_LIB.

- Tribol, used when MFEM_USE_TRIBOL = YES.
-  URL: https://github.com/LLNL/Tribol
-  Options: TRIBOL_DIR, TRIBOL_OPT, TRIBOL_LIB.
-
 - Enzyme, used when MFEM_USE_ENZYME = YES. Requires LLVM/Clang >= 14.0.0.
  URL: https://github.com/EnzymeAD/Enzyme
  Options: ENZYME_DIR, ENZYME_OPT, ENZYME_LIB.
@@ -984,7 +954,6 @@ The following options are equivalent to the GNU make options with the same name:

 MFEM_USE_MPI
 MFEM_USE_METIS - Set to ${MFEM_USE_MPI}, can be overwritten.
-MFEM_PRECISION
 MFEM_USE_LIBUNWIND
 MFEM_USE_LAPACK
 MFEM_THREAD_SAFE
@@ -992,6 +961,7 @@ MFEM_USE_LEGACY_OPENMP
 MFEM_USE_OPENMP
 MFEM_USE_MEMALLOC
 MFEM_TIMER_TYPE - Set automatically, can be overwritten.
+MFEM_USE_MESQUITE
 MFEM_USE_SUITESPARSE
 MFEM_USE_SUPERLU
 MFEM_USE_MUMPS
@@ -1018,7 +988,6 @@ MFEM_USE_CALIPER
 MFEM_USE_FMS
 MFEM_USE_BENCHMARK
 MFEM_USE_PARELAG
-MFEM_USE_TRIBOL
 MFEM_USE_ENZYME

 The following options are CMake specific:
@@ -1057,6 +1026,7 @@ The CMake build system adds auto-detection for the following packages/libraries:
 - HYPRE
 - METIS - The option MFEM_USE_METIS_5 is auto-detected.
 - ParMETIS
+ - MESQUITE
 - SuiteSparse
 - SuperLUDist, STRUMPACK
 - Ginkgo
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC
+Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -212,6 +212,10 @@ IF (DEFINED TPL_ENABLE_SUNDIALS)
  SET(MFEM_USE_SUNDIALS ${TPL_ENABLE_SUNDIALS} CACHE BOOL "Enable SUNDIALS usage" FORCE)
 ENDIF()

+IF (DEFINED TPL_ENABLE_MESQUITE)
+  SET(MFEM_USE_MESQUITE ${TPL_ENABLE_MESQUITE} CACHE BOOL "Enable MESQUITE usage" FORCE)
+ENDIF()
+
 IF (DEFINED TPL_ENABLE_SUITESPARSE)
  SET(MFEM_USE_SUITESPARSE ${TPL_ENABLE_SUITESPARSE} CACHE BOOL "Enable SuiteSparse usage" FORCE)
 ENDIF()
@@ -287,7 +291,3 @@ ENDIF()
 IF (DEFINED TPL_ENABLE_PARELAG)
  SET(MFEM_USE_PARELAG ${TPL_ENABLE_PARELAG} CACHE BOOL "Enable ParELAG" FORCE)
 ENDIF()
-
-IF (DEFINED TPL_ENABLE_TRIBOL)
-  SET(MFEM_USE_TRIBOL ${TPL_ENABLE_TRIBOL} CACHE BOOL "Enable Tribol" FORCE)
-ENDIF()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,8 +18,6 @@ set(MFEM_GIT_STRING "@MFEM_GIT_STRING@")
 set(MFEM_USE_MPI @MFEM_USE_MPI@)
 set(MFEM_USE_METIS @MFEM_USE_METIS@)
 set(MFEM_USE_METIS_5 @MFEM_USE_METIS_5@)
-set(MFEM_USE_DOUBLE @MFEM_USE_DOUBLE@)
-set(MFEM_USE_SINGLE @MFEM_USE_SINGLE@)
 set(MFEM_DEBUG @MFEM_DEBUG@)
 set(MFEM_USE_EXCEPTIONS @MFEM_USE_EXCEPTIONS@)
 set(MFEM_USE_ZLIB @MFEM_USE_ZLIB@)
@@ -31,6 +29,7 @@ set(MFEM_USE_LEGACY_OPENMP @MFEM_USE_LEGACY_OPENMP@)
 set(MFEM_USE_MEMALLOC @MFEM_USE_MEMALLOC@)
 set(MFEM_TIMER_TYPE @MFEM_TIMER_TYPE@)
 set(MFEM_USE_SUNDIALS @MFEM_USE_SUNDIALS@)
+set(MFEM_USE_MESQUITE @MFEM_USE_MESQUITE@)
 set(MFEM_USE_SUITESPARSE @MFEM_USE_SUITESPARSE@)
 set(MFEM_USE_SUPERLU @MFEM_USE_SUPERLU@)
 set(MFEM_USE_MUMPS @MFEM_USE_MUMPS@)
@@ -57,14 +56,11 @@ set(MFEM_USE_SIMD @MFEM_USE_SIMD@)
 set(MFEM_USE_ADIOS2 @MFEM_USE_ADIOS2@)
 set(MFEM_USE_MOONOLITH @MFEM_USE_MOONOLITH@)
 set(MFEM_USE_CODIPACK @MFEM_USE_CODIPACK@)
-set(MFEM_USE_MKL_CPARDISO @MFEM_USE_MKL_CPARDISO@)
-set(MFEM_USE_MKL_PARDISO @MFEM_USE_MKL_PARDISO@)
 set(MFEM_USE_ADFORWARD @MFEM_USE_ADFORWARD@)
 set(MFEM_USE_CALIPER @MFEM_USE_CALIPER@)
 set(MFEM_USE_ALGOIM @MFEM_USE_ALGOIM@)
 set(MFEM_USE_BENCHMARK @MFEM_USE_BENCHMARK@)
 set(MFEM_USE_PARELAG @MFEM_USE_PARELAG@)
-set(MFEM_USE_TRIBOL @MFEM_USE_TRIBOL@)
 set(MFEM_USE_ENZYME @MFEM_USE_ENZYME@)

 set(MFEM_CXX_COMPILER "@CMAKE_CXX_COMPILER@")
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -39,19 +39,10 @@
 // Description of the git commit used to build MFEM.
 #cmakedefine MFEM_GIT_STRING "@MFEM_GIT_STRING@"

-// Enable shared library build of MFEM.
-#cmakedefine MFEM_SHARED_BUILD
-
 // Build the parallel MFEM library.
 // Requires an MPI compiler, and the libraries HYPRE and METIS.
 #cmakedefine MFEM_USE_MPI

-// Use double-precision floating point type
-#cmakedefine MFEM_USE_DOUBLE
-
-// Use single-precision floating point type
-#cmakedefine MFEM_USE_SINGLE
-
 // Enable debug checks in MFEM.
 #cmakedefine MFEM_DEBUG

@@ -86,102 +77,100 @@
 // Internal MFEM option: enable group/batch allocation for some small objects.
 #cmakedefine MFEM_USE_MEMALLOC

-// Which library functions to use in class StopWatch for measuring time.
-// For a list of the available options, see INSTALL.
-// If not defined, an option is selected automatically.
-#cmakedefine MFEM_TIMER_TYPE @MFEM_TIMER_TYPE@
-
-// Enable MFEM functionality based on the SUNDIALS libraries.
-#cmakedefine MFEM_USE_SUNDIALS
+// Enable MFEM functionality based on the Mesquite library.
+#cmakedefine MFEM_USE_MESQUITE

 // Enable MFEM functionality based on the SuiteSparse library.
 #cmakedefine MFEM_USE_SUITESPARSE

 // Enable MFEM functionality based on the SuperLU_DIST library.
 #cmakedefine MFEM_USE_SUPERLU
-#cmakedefine MFEM_USE_SUPERLU5

 // Enable MFEM functionality based on the MUMPS library.
 #cmakedefine MFEM_USE_MUMPS
-#cmakedefine MFEM_MUMPS_VERSION @MFEM_MUMPS_VERSION@

 // Enable MFEM functionality based on the STRUMPACK library.
 #cmakedefine MFEM_USE_STRUMPACK

-// Enable functionality based on the Ginkgo library.
+// Enable functionality based on the Ginkgo library
 #cmakedefine MFEM_USE_GINKGO

-// Enable MFEM functionality based on the AmgX library.
+// Enable MFEM functionality based on the AmgX library
 #cmakedefine MFEM_USE_AMGX

-// Enable secure socket streams based on the GNUTLS library.
+// Enable MFEM functionality based on the GnuTLS library
 #cmakedefine MFEM_USE_GNUTLS

-// Enable Sidre support.
-#cmakedefine MFEM_USE_SIDRE
-
-// Enable the use of SIMD in the high performance templated classes.
-#cmakedefine MFEM_USE_SIMD
-
-// Enable FMS support.
-#cmakedefine MFEM_USE_FMS
-
-// Enable Conduit support.
-#cmakedefine MFEM_USE_CONDUIT
-
-// Enable functionality based on the NetCDF library (reading CUBIT files).
-#cmakedefine MFEM_USE_NETCDF
-
-// Enable functionality based on the PETSc library.
-#cmakedefine MFEM_USE_PETSC
-
-// Enable functionality based on the SLEPc library.
-#cmakedefine MFEM_USE_SLEPC
-
-// Enable functionality based on the MPFR library.
-#cmakedefine MFEM_USE_MPFR
-
-// Enable MFEM functionality based on the PUMI library.
-#cmakedefine MFEM_USE_PUMI
-
-// Enable Moonolith-based general interpolation between finite element spaces.
-#cmakedefine MFEM_USE_MOONOLITH
-
-// Enable MFEM functionality based on the HIOP library.
-#cmakedefine MFEM_USE_HIOP
-
-// Enable MFEM functionality based on the GSLIB library.
+// Enable MFEM functionality based on the GSLIB library
 #cmakedefine MFEM_USE_GSLIB

-// Build the NVIDIA GPU/CUDA-enabled version of the MFEM library.
+// Enable MFEM functionality based on the NetCDF library
+#cmakedefine MFEM_USE_NETCDF
+
+// Enable MFEM functionality based on the PETSc library
+#cmakedefine MFEM_USE_PETSC
+
+// Enable MFEM functionality based on the SLEPc library
+#cmakedefine MFEM_USE_SLEPC
+
+// Enable MFEM functionality based on the Sidre library
+#cmakedefine MFEM_USE_SIDRE
+
+// Enable the use of SIMD in the high performance templated classes
+#cmakedefine MFEM_USE_SIMD
+
+// Enable MFEM functionality based on the FMS library
+#cmakedefine MFEM_USE_FMS
+
+// Enable MFEM functionality based on Conduit
+#cmakedefine MFEM_USE_CONDUIT
+
+// Enable MFEM functionality based on the PUMI library
+#cmakedefine MFEM_USE_PUMI
+
+// Enable MFEM functionality based on the Moonolith library
+#cmakedefine MFEM_USE_MOONOLITH
+
+// Enable MFEM functionality based on the HiOp library
+#cmakedefine MFEM_USE_HIOP
+
+// Build the GPU/CUDA-enabled version of the MFEM library.
 // Requires a CUDA compiler (nvcc).
 #cmakedefine MFEM_USE_CUDA

-// Build the AMD GPU/HIP-enabled version of the MFEM library.
+// Build the HIP-enabled version of the MFEM library.
 // Requires a HIP compiler (hipcc).
 #cmakedefine MFEM_USE_HIP

-// Enable functionality based on the RAJA library.
+// Enable MFEM functionality based on the RAJA library
 #cmakedefine MFEM_USE_RAJA

-// Enable functionality based on the OCCA library.
+// Enable MFEM functionality based on the OCCA library
 #cmakedefine MFEM_USE_OCCA

-// Enable functionality based on the libCEED library.
+// Enable MFEM functionality based on the libCEED library
 #cmakedefine MFEM_USE_CEED

-// Enable functionality based on the Caliper library.
-#cmakedefine MFEM_USE_CALIPER
-
-// Enable functionality based on the Algoim library.
-#cmakedefine MFEM_USE_ALGOIM
-
-// Enable functionality based on the Umpire library.
+// Enable MFEM functionality based on the Umpire library
 #cmakedefine MFEM_USE_UMPIRE

-// Enable IO functionality based on the ADIOS2 library.
+// Enable MFEM functionality based on the ADIOS2 library
 #cmakedefine MFEM_USE_ADIOS2

+// Enable MFEM functionality based on the Caliper library
+#cmakedefine MFEM_USE_CALIPER
+
+// Enable MFEM functionality based on the Algoim library
+#cmakedefine MFEM_USE_ALGOIM
+
+// Which library functions to use in class StopWatch for measuring time.
+// For a list of the available options, see INSTALL.
+// If not defined, an option is selected automatically.
+#define MFEM_TIMER_TYPE @MFEM_TIMER_TYPE@
+
+// Enable MFEM functionality based on the SUNDIALS libraries.
+#cmakedefine MFEM_USE_SUNDIALS
+
 // Version of HYPRE used for building MFEM.
 #cmakedefine MFEM_HYPRE_VERSION @MFEM_HYPRE_VERSION@

@@ -192,16 +181,13 @@
 // Enable interface to the MKL CPardiso library.
 #cmakedefine MFEM_USE_MKL_CPARDISO

-// Enable interface to the MKL Pardiso library.
-#cmakedefine MFEM_USE_MKL_PARDISO
-
-// Use forward mode for automatic differentiation.
+// Use forward mode for automatic differentiation
 #cmakedefine MFEM_USE_ADFORWARD

-// Enable the use of the CoDiPack library for AD.
+// Enable the use of the CoDiPack library for AD
 #cmakedefine MFEM_USE_CODIPACK

-// Enable functionality based on the Google Benchmark library.
+// Enable MFEM functionality based on the Google Benchmark library.
 #cmakedefine MFEM_USE_BENCHMARK

 // Enable Enzyme for AD
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -16,7 +16,7 @@

 include(MfemCmakeUtilities)
 mfem_find_package(Algoim ALGOIM ALGOIM_DIR
-        "include;src" "algoim_quad.hpp"
+       	"include" "algoim_quad.hpp"
       	"" ""
-        "Paths to headers required by Algoim."
-        "Libraries required by Algoim.")
+	"Paths to headers required by Algoim."
+	"Libraries required by Algoim.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,13 +18,4 @@ include(MfemCmakeUtilities)
 # Note: components are enabled based on the find_package() parameters.
 mfem_find_package(Axom AXOM AXOM_DIR "include" "" "lib" ""
  "Paths to headers required by Axom." "Libraries required by Axom."
-  ADD_COMPONENT core "include" axom/core.hpp "lib" axom_core
-  ADD_COMPONENT inlet "include" axom/inlet.hpp "lib" axom_inlet
-  ADD_COMPONENT klee "include" axom/klee.hpp "lib" axom_klee
-  ADD_COMPONENT lumberjack "include" axom/lumberjack.hpp "lib" axom_lumberjack
-  ADD_COMPONENT mint "include" axom/mint.hpp "lib" axom_mint
-  ADD_COMPONENT multimat "include" axom/multimat.hpp "lib" axom_multimat
-  ADD_COMPONENT quest "include" axom/quest.hpp "lib" axom_quest
-  ADD_COMPONENT sidre "include" axom/sidre.hpp "lib" axom_sidre
-  ADD_COMPONENT slam "include" axom/slam.hpp "lib" axom_slam
-  ADD_COMPONENT slic "include" axom/slic.hpp "lib" axom_slic)
+  ADD_COMPONENT Axom "include" axom/config.hpp "lib" axom)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -16,22 +16,7 @@

 include(MfemCmakeUtilities)
 mfem_find_package(Caliper CALIPER CALIPER_DIR
-      "include" "caliper/cali.h"
-      "lib" "caliper"
-      "Paths to headers required by Caliper."
-      "Libraries required by Caliper.")
-
-# Append adiak path/lib if the user provided ADIAK_DIR
-if(ADIAK_DIR AND EXISTS ${ADIAK_DIR})
-    find_package(adiak NO_DEFAULT_PATH REQUIRED PATHS ${ADIAK_DIR}/lib/cmake/adiak ${ADIAK_DIR})
-    list(APPEND CALIPER_INCLUDE_DIRS ${adiak_INCLUDE_DIRS})
-    list(APPEND CALIPER_LIBRARIES ${adiak_LIBRARIES})
-endif()
-
-# Append gotcha path/lib if the user provided GOTCHA_DIR
-if(GOTCHA_DIR AND EXISTS ${GOTCHA_DIR})
-    find_package(gotcha NO_DEFAULT_PATH REQUIRED PATHS ${GOTCHA_DIR}/lib/cmake/gotcha ${GOTCHA_DIR})
-    list(APPEND CALIPER_INCLUDE_DIRS ${gotcha_INCLUDE_DIRS})
-    list(APPEND CALIPER_LIBRARIES ${gotcha_LIBRARIES})
-endif()
-
+       	"include" "caliper/cali.h"
+       	"lib" "caliper"
+  	"Paths to headers required by Caliper."
+       	"Libraries required by Caliper.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -21,26 +21,15 @@ if(EXISTS ${CONDUIT_DIR}/include/conduit/conduit_relay_hdf5.hpp)
  # we only need  HDF5 if Conduit was built with HDF5 support
  set(Conduit_REQUIRED_PACKAGES "HDF5" CACHE STRING
      "Additional packages required by Conduit.")
-  # Suppress warning about HDF5_ROOT being set
-  if (POLICY CMP0074)
-    cmake_policy(SET CMP0074 NEW)
-  endif()
-  # HDF5_ROOT is needed in some cases, e.g. when HDF5_TARGET_NAMES is set and
-  # MFEM's FindHDF5.cmake is not used.
-  set(HDF5_ROOT ${HDF5_DIR} CACHE PATH "")
-else()
-  message(STATUS "Conduit Relay HDF5 Support is DISABLED")
+  else()
+    message(STATUS "Conduit Relay HDF5 Support is DISABLED")
 endif()

 include(MfemCmakeUtilities)
 mfem_find_package(Conduit CONDUIT CONDUIT_DIR
  "include;include/conduit" conduit.hpp "lib" conduit
  "Paths to headers required by Conduit." "Libraries required by Conduit."
-  ADD_COMPONENT blueprint
-    "include;include/conduit" conduit_blueprint.hpp "lib" conduit_blueprint
-  ADD_COMPONENT blueprint_mpi
-    "include;include/conduit" conduit_blueprint_mpi.hpp "lib" conduit_blueprint_mpi
  ADD_COMPONENT relay
    "include;include/conduit" conduit_relay.hpp "lib" conduit_relay
-  ADD_COMPONENT relay_mpi
-    "include;include/conduit" conduit_relay_mpi.hpp "lib" conduit_relay_mpi)
+  ADD_COMPONENT blueprint
+      "include;include/conduit" conduit_blueprint.hpp "lib" conduit_blueprint)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,7 +19,7 @@ if(EXISTS "${ENZYME_DIR}/ClangEnzyme-${ENZYME_VERSION}.so")
  # Set ENZYME_FOUND
  set(ENZYME_FOUND TRUE CACHE BOOL "ENZYME was found." FORCE)

-  # Set CXX flags to accommodate the Enzyme Clang plugin
+  # Set CXX flags to accomodate the Enzyme Clang plugin
  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Xclang -load -Xclang ${ENZYME_DIR}/ClangEnzyme-${ENZYME_VERSION}.so -mllvm -enzyme-loose-types=1")
  set(MFEM_USE_ENZYME YES)
 else()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,70 +0,0 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - HDF5_FOUND - If HDF5 was found
-#   - HDF5_LIBRARIES - The HDF5 libraries
-#   - HDF5_INCLUDE_DIRS - The HDF5 include directories
-
-# NOTE: Using this FindHDF5.cmake instead of the CMake provided version may lead
-#       to issues with some TPL libraries that depend (or may depend) on HDF5.
-#       For this reason, we should consider removing this file, or at least
-#       making it use the CMake provided version by default and apply the logic
-#       below only when specifically requested by a user.  -V. Dobrev
-
-# First Check for HDF5_DIR
-if(NOT HDF5_DIR)
-  message(FATAL_ERROR
-    "Could not find HDF5. HDF5 support needs explicit HDF5_DIR")
-endif()
-
-if (NOT HDF5_FIND_QUIETLY)
-  message(STATUS "Looking for HDF5 ...")
-  message(STATUS "   in HDF5_DIR = ${HDF5_DIR}")
-endif()
-
-# Find includes
-find_path( HDF5_INCLUDE_DIRS hdf5.h
-           PATHS  ${HDF5_DIR}/include/
-           NO_DEFAULT_PATH
-           NO_CMAKE_ENVIRONMENT_PATH
-           NO_CMAKE_PATH
-           NO_SYSTEM_ENVIRONMENT_PATH
-           NO_CMAKE_SYSTEM_PATH)
-
-find_library( __HDF5_LIBRARY NAMES hdf5 libhdf5 libhdf5_D libhdf5_debug
-              PATHS ${HDF5_DIR}/lib
-              NO_DEFAULT_PATH
-              NO_CMAKE_ENVIRONMENT_PATH
-              NO_CMAKE_PATH
-              NO_SYSTEM_ENVIRONMENT_PATH
-              NO_CMAKE_SYSTEM_PATH)
-
-find_library( __HDF5_HL_LIBRARY NAMES hdf5_hl libhdf5_hl libhdf5_hl_D libhdf5_hl_debug
-              PATHS ${HDF5_DIR}/lib
-              NO_DEFAULT_PATH
-              NO_CMAKE_ENVIRONMENT_PATH
-              NO_CMAKE_PATH
-              NO_SYSTEM_ENVIRONMENT_PATH
-              NO_CMAKE_SYSTEM_PATH)
-
-set(HDF5_LIBRARIES ${__HDF5_HL_LIBRARY} ${__HDF5_LIBRARY})
-
-include(FindPackageHandleStandardArgs)
-
-# Handle the QUIETLY and REQUIRED arguments and set HDF5_FOUND to TRUE if all
-# listed variables are TRUE
-find_package_handle_standard_args(HDF5
-                                  " *** HDF5 not found. Please set HDF5_DIR."
-                                  HDF5_LIBRARIES
-                                  HDF5_INCLUDE_DIRS
-                                  __HDF5_LIBRARY
-                                  __HDF5_HL_LIBRARY)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,13 +14,9 @@
 #   - HYPRE_LIBRARIES
 #   - HYPRE_INCLUDE_DIRS
 #   - HYPRE_VERSION
-#   - HYPRE_USING_CUDA (internal)
 #   - HYPRE_USING_HIP (internal)

 if (HYPRE_FOUND)
-  if (HYPRE_USING_CUDA)
-    find_package(CUDAToolkit REQUIRED)
-  endif()
  if (HYPRE_USING_HIP)
    find_package(rocsparse REQUIRED)
    find_package(rocrand REQUIRED)
@@ -31,20 +27,6 @@ endif()
 include(MfemCmakeUtilities)
 mfem_find_package(HYPRE HYPRE HYPRE_DIR "include" "HYPRE.h" "lib" "HYPRE"
  "Paths to headers required by HYPRE." "Libraries required by HYPRE."
-  CHECK_BUILD HYPRE_USING_CUDA FALSE
-  "
-#undef HYPRE_USING_CUDA
-#include <HYPRE_config.h>
-
-#ifndef HYPRE_USING_CUDA
-#error HYPRE is built without CUDA.
-#endif
-
-int main()
-{
-   return 0;
-}
-"
  CHECK_BUILD HYPRE_USING_HIP FALSE
  "
 #undef HYPRE_USING_HIP
@@ -75,18 +57,6 @@ if (HYPRE_FOUND AND (NOT HYPRE_VERSION))
  endif()
 endif()

-if (HYPRE_FOUND AND HYPRE_USING_CUDA)
-  find_package(CUDAToolkit REQUIRED)
-  get_target_property(CUSPARSE_LIBRARIES CUDA::cusparse LOCATION)
-  get_target_property(CURAND_LIBRARIES CUDA::curand LOCATION)
-  get_target_property(CUBLAS_LIBRARIES CUDA::cublas LOCATION)
-  list(APPEND HYPRE_LIBRARIES ${CUSPARSE_LIBRARIES} ${CURAND_LIBRARIES}
-       ${CUBLAS_LIBRARIES})
-  set(HYPRE_LIBRARIES ${HYPRE_LIBRARIES} CACHE STRING
-      "HYPRE libraries + dependencies." FORCE)
-  message(STATUS "Updated HYPRE_LIBRARIES: ${HYPRE_LIBRARIES}")
-endif()
-
 if (HYPRE_FOUND AND HYPRE_USING_HIP)
  find_package(rocsparse REQUIRED)
  find_package(rocrand REQUIRED)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,27 +0,0 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - MKL_PARDISO_FOUND
-#   - MKL_PARDISO_LIBRARIES
-#   - MKL_PARDISO_INCLUDE_DIRS
-
-if(NOT MKL_LIBRARY_DIR)
-  message(WARNING "Using default MKL library path. Double check the variable MKL_LIBRARY_DIR")
-  set(MKL_LIBRARY_DIR "lib/intel64")
-endif()
-
-include(MfemCmakeUtilities)
-mfem_find_package(MKL_PARDISO MKL_PARDISO
-    MKL_PARDISO_DIR "include" mkl_pardiso.h ${MKL_LIBRARY_DIR} mkl_core
-  "Paths to headers required by MKL Pardiso." "Libraries required by MKL PARDISO."
-  ADD_COMPONENT MKL_LP64 "include" "" ${MKL_LIBRARY_DIR} mkl_intel_lp64
-  ADD_COMPONENT MKL_SEQUENTIAL "include" "" ${MKL_LIBRARY_DIR} mkl_sequential)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -11,39 +11,13 @@

 # Sets the following variables:
 #   - MUMPS_FOUND
-#   - MUMPS_LIBRARIES
 #   - MUMPS_INCLUDE_DIRS
-#   - MUMPS_VERSION
+#   - MUMPS_LIBRARIES

 include(MfemCmakeUtilities)
-
-# Toggle which precision of MUMPS to use depending on the precision of MFEM.
-if (MFEM_USE_DOUBLE)
-  set(_mumps_header dmumps_c.h)
-  set(_mumps_lib dmumps)
-elseif(MFEM_USE_SINGLE)
-  set(_mumps_header smumps_c.h)
-  set(_mumps_lib smumps)
-endif()
-
 mfem_find_package(MUMPS MUMPS MUMPS_DIR
-  "include" ${_mumps_header} "lib" ${_mumps_lib}
+  "include" dmumps_c.h "lib" dmumps
  "Paths to headers required by MUMPS."
  "Libraries required by MUMPS."
-  ADD_COMPONENT mumps_common "include" ${_mumps_header} "lib" mumps_common
-  ADD_COMPONENT pord "include" ${_mumps_header} "lib" pord)
-
-if (MUMPS_FOUND AND (NOT MUMPS_VERSION))
-  try_run(MUMPS_VERSION_RUN_RESULT MUMPS_VERSION_COMPILE_RESULT
-          ${CMAKE_CURRENT_BINARY_DIR}/config
-          ${CMAKE_CURRENT_SOURCE_DIR}/config/get_mumps_version.cpp
-          CMAKE_FLAGS -DINCLUDE_DIRECTORIES:STRING=${MUMPS_INCLUDE_DIRS}
-          RUN_OUTPUT_VARIABLE MUMPS_VERSION_OUTPUT)
-  if ((MUMPS_VERSION_RUN_RESULT EQUAL 0) AND MUMPS_VERSION_OUTPUT)
-    string(STRIP "${MUMPS_VERSION_OUTPUT}" MUMPS_VERSION)
-    set(MUMPS_VERSION ${MUMPS_VERSION} CACHE STRING "MUMPS version." FORCE)
-    message(STATUS "Found MUMPS version ${MUMPS_VERSION}")
-  else()
-    message(FATAL_ERROR "Unable to determine MUMPS version.")
-  endif()
-endif()
+  ADD_COMPONENT mumps_common "include" dmumps_c.h "lib" mumps_common
+  ADD_COMPONENT pord "include" dmumps_c.h "lib" pord)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -10,13 +10,11 @@
 # CONTRIBUTING.md for details.

 # Defines the following variables:
-#   - TRIBOL_FOUND
-#   - TRIBOL_LIBRARIES
-#   - TRIBOL_INCLUDE_DIRS
+#   - MESQUITE_FOUND
+#   - MESQUITE_LIBRARIES
+#   - MESQUITE_INCLUDE_DIRS

 include(MfemCmakeUtilities)
-# Note: components are enabled based on the find_package() parameters.
-mfem_find_package(Tribol TRIBOL TRIBOL_DIR "include" tribol/config.hpp "lib" tribol
-  "Paths to headers required by Tribol." "Libraries required by Tribol."
-  ADD_COMPONENT redecomp
-    "include" redecomp/redecomp.hpp "lib" redecomp)
+mfem_find_package(Mesquite MESQUITE MESQUITE_DIR
+  "include" "Mesquite_all_headers.hpp" "lib" "mesquite"
+  "Paths to headers required by Mesquite." "Libraries required by Mesquite.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,38 +14,21 @@
 #   - NETCDF_LIBRARIES
 #   - NETCDF_INCLUDE_DIRS

-# Suppress warning about HDF5_ROOT being set
-if (POLICY CMP0074)
-  cmake_policy(SET CMP0074 NEW)
-endif()
-
 include(MfemCmakeUtilities)

 # FindHDF5.cmake uses HDF5_ROOT, so we "translate" from the MFEM convention
-# (Needed in some cases, e.g. when HDF5_TARGET_NAMES is set and MFEM's
-# FindHDF5.cmake is not used.)
 set(HDF5_ROOT ${HDF5_DIR} CACHE PATH "")
-
 # We need to guard against the case where HDF5 was already found but without
 # the HL extensions (in which case mfem_find_package will treat the package
 # as already having been found), so we reset the variable to force FindHDF5.cmake
 # to be called for a second time
 set(HDF5_FOUND OFF)
 enable_language(C) # FindHDF5.cmake uses the C compiler
-
 mfem_find_package(NetCDF NETCDF NETCDF_DIR "include" netcdf.h "lib" netcdf
  "Paths to headers required by NetCDF." "Libraries required by NetCDF.")
-
 # The HL extension libraries are in a separate variable and must precede
 # the "regular" hdf5 library, as hdf5_hl depends on hdf5
 # The netcdf library will always be the first element of NETCDF_LIBRARIES
 # and we need to insert after that library but before the hdf5 library, so
 # position 1 is used
-# (Needed in some cases, e.g. when HDF5_TARGET_NAMES is set and MFEM's
-# FindHDF5.cmake is not used.)
-if (HDF5_C_LIBRARY_hdf5_hl)
-  list(INSERT NETCDF_LIBRARIES 1 ${HDF5_C_LIBRARY_hdf5_hl})
-  if (NOT NetCDF_FIND_QUIETLY)
-    message(STATUS "Updated NetCDF libraries: ${NETCDF_LIBRARIES}")
-  endif()
-endif()
+list(INSERT NETCDF_LIBRARIES 1 ${HDF5_C_LIBRARY_hdf5_hl})
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,27 +14,17 @@
 #   - RAJA_LIBRARIES
 #   - RAJA_INCLUDE_DIRS

-if (RAJA_FOUND)
-   return()
+include(MfemCmakeUtilities)
+mfem_find_package(RAJA RAJA RAJA_DIR "include" "RAJA/RAJA.hpp" "lib" "RAJA"
+  "Paths to headers required by RAJA." "Libraries required by RAJA.")
+
+if (NOT RAJA_CONFIG_CMAKE)
+   set(RAJA_CONFIG_CMAKE "${RAJA_DIR}/share/raja/cmake/raja-config.cmake")
 endif()
-message(STATUS "Looking for RAJA ...")
-if (RAJA_DIR)
-   message(STATUS "   in RAJA_DIR = ${RAJA_DIR}")
-   find_package(RAJA CONFIG NO_DEFAULT_PATH PATHS "${RAJA_DIR}")
-endif()
-if (NOT RAJA_FOUND)
-   message(STATUS "   in standard CMake locations")
-   find_package(RAJA CONFIG)
-endif()
-if (RAJA_FOUND)
-   set(RAJA_LIBRARIES "RAJA" CACHE STRING "RAJA imported target." FORCE)
-   set(RAJA_INCLUDE_DIRS "" CACHE STRING "RAJA include dirs (not used)" FORCE)
-   message(STATUS
-      "Found RAJA target: ${RAJA_LIBRARIES} (version: ${RAJA_VERSION})")
-else()
-   set(msg STATUS)
-   if (RAJA_FIND_REQUIRED)
-      set(msg FATAL_ERROR)
+if (EXISTS "${RAJA_CONFIG_CMAKE}")
+   include("${RAJA_CONFIG_CMAKE}")
+   if (ENABLE_CUDA AND NOT MFEM_USE_CUDA)
+      message(FATAL_ERROR
+         "RAJA is built with CUDA: MFEM_USE_CUDA=YES is required")
   endif()
-   message(${msg} "RAJA not found. Please set RAJA_DIR to the RAJA prefix.")
 endif()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -22,8 +22,8 @@ mfem_find_package(SUNDIALS SUNDIALS SUNDIALS_DIR
    "include" nvector/nvector_serial.h "lib" sundials_nvecserial
  ADD_COMPONENT NVector_Cuda
    "include" nvector/nvector_cuda.h "lib" sundials_nveccuda
-  ADD_COMPONENT NVector_Hip
-    "include" nvector/nvector_hip.h "lib" sundials_nvechip
+  ADD_COMPONENT NVector_ParHyp
+    "include" nvector/nvector_parhyp.h "lib" sundials_nvecparhyp
  ADD_COMPONENT NVector_Parallel
    "include" nvector/nvector_parallel.h "lib" sundials_nvecparallel
  ADD_COMPONENT NVector_MPIPlusX
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,23 +14,6 @@
 #   - UMPIRE_LIBRARIES
 #   - UMPIRE_INCLUDE_DIRS

-if (NOT umpire_DIR AND UMPIRE_DIR)
-  set(umpire_DIR ${UMPIRE_DIR}/lib/cmake/umpire)
-endif()
-message(STATUS "Looking for UMPIRE ...")
-message(STATUS "   in UMPIRE_DIR = ${UMPIRE_DIR}")
-message(STATUS "      umpire_DIR = ${umpire_DIR}")
-find_package(umpire CONFIG)
-set(UMPIRE_FOUND ${umpire_FOUND})
-set(UMPIRE_LIBRARIES "umpire")
-if (UMPIRE_FOUND)
-  message(STATUS
-    "Found UMPIRE target: ${UMPIRE_LIBRARIES} (version: ${umpire_VERSION})")
-else()
-  set(msg STATUS)
-  if (UMPIRE_FIND_REQUIRED)
-    set(msg FATAL_ERROR)
-  endif()
-  message(${msg}
-    "UMPIRE not found. Please set UMPIRE_DIR to the install prefix.")
-endif()
+include(MfemCmakeUtilities)
+mfem_find_package(UMPIRE UMPIRE UMPIRE_DIR "include" "umpire/Umpire.hpp" "lib" "umpire"
+  "Paths to headers required by UMPIRE." "Libraries required by UMPIRE.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -43,18 +43,22 @@ function(convert_filenames_to_full_paths NAMES)
  set(${NAMES} ${tmp_names} PARENT_SCOPE)
 endfunction()

-# Wrapper for add_executable
+# Wrapper for add_executable that calls the HIP wrapper if applicable
 macro(mfem_add_executable NAME)
-  add_executable(${NAME} ${ARGN})
-  if (MFEM_USE_CUDA)
-    set_target_properties(${NAME} PROPERTIES
-      CUDA_RESOLVE_DEVICE_SYMBOLS ON)
+  if (MFEM_USE_HIP)
+    add_executable(${NAME} ${ARGN})
+  else()
+    add_executable(${NAME} ${ARGN})
  endif()
 endmacro()

-# Wrapper for add_library
+# Wrapper for add_library that calls the HIP wrapper if applicable
 macro(mfem_add_library NAME)
-  add_library(${NAME} ${ARGN})
+  if (MFEM_USE_HIP)
+    add_library(${NAME} ${ARGN})
+  else()
+    add_library(${NAME} ${ARGN})
+  endif()
 endmacro()

 # Simple shortcut to add_custom_target() with option to add the target to the
@@ -103,6 +107,25 @@ macro(add_mfem_examples EXE_SRCS)
      ${MFEM_EXEC_PREREQUISITES_TARGET_NAME} ${EXE_PREREQUISITE})

    target_link_libraries(${EXE_NAME} mfem)
+    if (MFEM_USE_MPI)
+      # Not needed: (mfem already links with MPI_CXX_LIBRARIES)
+      # target_link_libraries(${EXE_NAME} ${MPI_CXX_LIBRARIES})
+
+      # Language-specific include directories:
+      if (MPI_CXX_INCLUDE_PATH)
+        target_include_directories(${EXE_NAME} PRIVATE "${MPI_CXX_INCLUDE_PATH}")
+      endif()
+      if (MPI_CXX_COMPILE_FLAGS)
+        separate_arguments(MPI_CXX_COMPILE_ARGS UNIX_COMMAND
+          "${MPI_CXX_COMPILE_FLAGS}")
+        target_compile_options(${EXE_NAME} PRIVATE ${MPI_CXX_COMPILE_ARGS})
+      endif()
+
+      if (MPI_CXX_LINK_FLAGS)
+        set_target_properties(${EXE_NAME} PROPERTIES
+          LINK_FLAGS "${MPI_CXX_LINK_FLAGS}")
+      endif()
+    endif()
  endforeach(SRC_FILE)
 endmacro()

@@ -143,16 +166,53 @@ macro(add_mfem_miniapp MFEM_EXE_NAME)

  # Append the additional libraries and options
  if (LIBRARIES_LIST)
-    target_link_libraries(${MFEM_EXE_NAME} PRIVATE ${LIBRARIES_LIST})
+    if(CMAKE_VERSION VERSION_GREATER 2.8.11)
+      target_link_libraries(${MFEM_EXE_NAME} PRIVATE ${LIBRARIES_LIST})
+    else()
+      target_link_libraries(${MFEM_EXE_NAME} ${LIBRARIES_LIST})
+    endif()
  endif()
  if (EXTRA_OPTIONS_LIST)
    string(REPLACE ";" " " EXTRA_OPTIONS_STRING "${EXTRA_OPTIONS_LIST}")
    message(STATUS "${MFEM_EXE_NAME}: add flags \"${EXTRA_OPTIONS_STRING}\"")
-    target_compile_options(${MFEM_EXE_NAME} PRIVATE ${EXTRA_OPTIONS_LIST})
+    if(CMAKE_VERSION VERSION_GREATER 2.8.11)
+      target_compile_options(${MFEM_EXE_NAME} PRIVATE ${EXTRA_OPTIONS_LIST})
+    else()
+      get_target_property(THIS_COMPILE_FLAGS ${MFEM_EXE_NAME} COMPILE_FLAGS)
+      if (THIS_COMPILE_FLAGS)
+        set(THIS_COMPILE_FLAGS "${THIS_COMPILE_FLAGS} ${EXTRA_OPTIONS_STRING}")
+      else()
+        set(THIS_COMPILE_FLAGS "${EXTRA_OPTIONS_STRING}")
+      endif()
+      set_target_properties(${MFEM_EXE_NAME}
+        PROPERTIES COMPILE_FLAGS ${THIS_COMPILE_FLAGS})
+    endif()
  endif()
  if (EXTRA_DEFINES_LIST)
    target_compile_definitions(${MFEM_EXE_NAME} PRIVATE ${EXTRA_DEFINES_LIST})
  endif()
+
+  # Handle the MPI separately
+  if (MFEM_USE_MPI)
+    # Add MPI_CXX_LIBRARIES, in case this target does not link with mfem.
+    if(CMAKE_VERSION VERSION_GREATER 2.8.11)
+      target_link_libraries(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_LIBRARIES})
+    else()
+      target_link_libraries(${MFEM_EXE_NAME} ${MPI_CXX_LIBRARIES})
+    endif()
+
+    if (MPI_CXX_INCLUDE_PATH)
+      target_include_directories(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_INCLUDE_PATH})
+    endif()
+    if (MPI_CXX_COMPILE_FLAGS)
+      target_compile_options(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_COMPILE_FLAGS})
+    endif()
+
+    if (MPI_CXX_LINK_FLAGS)
+      set_target_properties(${MFEM_EXE_NAME} PROPERTIES
+        LINK_FLAGS "${MPI_CXX_LINK_FLAGS}")
+    endif()
+  endif()
 endmacro()


@@ -397,9 +457,9 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
              break()
            endif()
          endforeach()
-          if (Required AND NOT ${ReqPack}_FOUND)
+          if (${Required} AND NOT ${ReqPack}_FOUND)
            message(FATAL_ERROR " *** Required package ${ReqPack} not found."
-              " Checked target names: ${ReqPack} ${${ReqPack}_TARGET_NAMES}")
+              "Checked target names: ${ReqPack} ${${ReqPack}_TARGET_NAMES}")
          endif()
        endif()
      endif()
@@ -465,18 +525,14 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
          endif()
          get_target_property(IsImported ${TargetName} IMPORTED)
          if (IsImported)
-            get_target_property(ImpConfigs ${TargetName} IMPORTED_CONFIGURATIONS)
-            # message(STATUS "${ReqPack} imported configs: ${ImpConfigs}")
            set(ImportConfig ${${ReqPack}_IMPORT_CONFIG})
            if (NOT ImportConfig)
              set(ImportConfig RELEASE)
-              list(FIND ImpConfigs ${ImportConfig} _Index)
-              if (_Index EQUAL -1)
-                list(GET ImpConfigs 0 ImportConfig)
-              endif()
            endif()
            set(ImportConfigSuffix "_${ImportConfig}")
-            if ((NOT ImportConfig) OR ("${ImportConfig}" STREQUAL "NO_CONFIG"))
+            get_target_property(ImpConfigs ${TargetName} IMPORTED_CONFIGURATIONS)
+            list(FIND ImpConfigs ${ImportConfig} _Index)
+            if ((_Index EQUAL -1) OR ("${ImportConfig}" STREQUAL "NO_CONFIG"))
              set(ImportConfig "NO_CONFIG")
              set(ImportConfigSuffix "")
              # message(FATAL_ERROR " *** ${ReqPack}: configuration "
@@ -494,8 +550,7 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
          else()
            # Set _Pack_LIBS from the target properties for ImportConfig
            foreach (_prop IMPORTED_LOCATION${ImportConfigSuffix}
-                IMPORTED_LINK_INTERFACE_LIBRARIES${ImportConfigSuffix}
-                INTERFACE_LINK_LIBRARIES)
+                IMPORTED_LINK_INTERFACE_LIBRARIES${ImportConfigSuffix})
              get_target_property(_value ${TargetName} ${_prop})
              if (_value)
                list(APPEND _Pack_LIBS ${_value})
@@ -746,7 +801,6 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
      list(APPEND CompileOpts "-isystem \"${SysDir}\"")
    endforeach()
  endif()
-  set(AddInterfaceLinkLibs TRUE)
  if ("${type}" STREQUAL "STATIC_LIBRARY")
    get_target_property(Location ${tgt} LOCATION)
    if (Location)
@@ -768,27 +822,11 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
      message(STATUS " *** Warning: [${tgt}] LOCATION not defined!")
    endif()
  elseif ("${type}" STREQUAL "INTERFACE_LIBRARY")
-    # The INTERFACE_LINK_LIBRARIES property is handled below.
-    # Other properties we may need to handle:
-    # INTERFACE_LINK_DEPENDS
-    # INTERFACE_LINK_DIRECTORIES
-    # INTERFACE_LINK_OPTIONS
-  else()
-    message(STATUS " *** Warning: [${tgt}] uses target type '${type}'"
-      " which is not supported!")
-    set(AddInterfaceLinkLibs FALSE)
-  endif()
-  if (AddInterfaceLinkLibs)
    get_target_property(Libs ${tgt} INTERFACE_LINK_LIBRARIES)
-    # message(STATUS "${tgt}[INTERFACE_LINK_LIBRARIES]: ${Libs}")
    if (Libs)
      foreach(Lib ${Libs})
        if (NOT (TARGET ${Lib}))
-          # message(STATUS "Lib = ${Lib}")
-          # Filter-out generator expressions
-          if (NOT ("${Lib}" MATCHES "^\\$"))
-            list(APPEND LinkOpts "${Lib}")
-          endif()
+          list(APPEND LinkOpts "${Lib}")
        else()
          mfem_get_target_options(${Lib} COpts LOpts)
          list(APPEND CompileOpts ${COpts})
@@ -796,6 +834,13 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
        endif()
      endforeach()
    endif()
+    # Other properties we may need to handle:
+    # INTERFACE_LINK_DEPENDS
+    # INTERFACE_LINK_DIRECTORIES
+    # INTERFACE_LINK_OPTIONS
+  else()
+    message(STATUS " *** Warning: [${tgt}] uses target type '${type}'"
+      " which is not supported!")
  endif()

  # Other potentially relevant properties:
@@ -819,9 +864,6 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
  set(${CompileOptsVar} "${CompileOpts}" PARENT_SCOPE)
  set(${LinkOptsVar} "${LinkOpts}" PARENT_SCOPE)

-  # message(STATUS "${tgt}[CompileOpts]: ${CompileOpts}")
-  # message(STATUS "${tgt}[LinkOpts]: ${LinkOpts}")
-
 endfunction(mfem_get_target_options)


@@ -842,17 +884,16 @@ function(mfem_export_mk_files)

  # Convert Boolean vars to YES/NO without writing the values to cache
  set(CONFIG_MK_BOOL_VARS MFEM_USE_MPI MFEM_USE_METIS MFEM_USE_METIS_5
-      MFEM_USE_SINGLE MFEM_USE_DOUBLE MFEM_DEBUG MFEM_USE_EXCEPTIONS
-      MFEM_USE_ZLIB MFEM_USE_LIBUNWIND MFEM_USE_LAPACK MFEM_THREAD_SAFE
-      MFEM_USE_LEGACY_OPENMP MFEM_USE_OPENMP MFEM_USE_MEMALLOC MFEM_USE_SUNDIALS
-      MFEM_USE_SUITESPARSE MFEM_USE_SUPERLU MFEM_USE_SUPERLU5 MFEM_USE_MUMPS
-      MFEM_USE_STRUMPACK MFEM_USE_GINKGO MFEM_USE_AMGX MFEM_USE_GNUTLS
-      MFEM_USE_NETCDF MFEM_USE_PETSC MFEM_USE_SLEPC MFEM_USE_MPFR MFEM_USE_SIDRE
-      MFEM_USE_FMS MFEM_USE_CONDUIT MFEM_USE_PUMI MFEM_USE_HIOP MFEM_USE_GSLIB
-      MFEM_USE_CUDA MFEM_USE_HIP MFEM_USE_RAJA MFEM_USE_OCCA MFEM_USE_CEED
-      MFEM_USE_CALIPER MFEM_USE_UMPIRE MFEM_USE_SIMD MFEM_USE_ADIOS2
-      MFEM_USE_MKL_CPARDISO MFEM_USE_MKL_PARDISO MFEM_USE_ADFORWARD
-      MFEM_USE_CODIPACK MFEM_USE_BENCHMARK MFEM_USE_PARELAG MFEM_USE_TRIBOL
+      MFEM_DEBUG MFEM_USE_EXCEPTIONS MFEM_USE_ZLIB MFEM_USE_LIBUNWIND
+      MFEM_USE_LAPACK MFEM_THREAD_SAFE MFEM_USE_LEGACY_OPENMP MFEM_USE_OPENMP
+      MFEM_USE_MEMALLOC MFEM_USE_SUNDIALS MFEM_USE_MESQUITE MFEM_USE_SUITESPARSE
+      MFEM_USE_SUPERLU MFEM_USE_SUPERLU5 MFEM_USE_MUMPS MFEM_USE_STRUMPACK
+      MFEM_USE_GINKGO MFEM_USE_AMGX MFEM_USE_GNUTLS MFEM_USE_NETCDF
+      MFEM_USE_PETSC MFEM_USE_SLEPC MFEM_USE_MPFR MFEM_USE_SIDRE MFEM_USE_FMS
+      MFEM_USE_CONDUIT MFEM_USE_PUMI MFEM_USE_HIOP MFEM_USE_GSLIB MFEM_USE_CUDA
+      MFEM_USE_HIP MFEM_USE_RAJA MFEM_USE_OCCA MFEM_USE_CEED MFEM_USE_CALIPER
+      MFEM_USE_UMPIRE MFEM_USE_SIMD MFEM_USE_ADIOS2 MFEM_USE_MKL_CPARDISO
+      MFEM_USE_ADFORWARD MFEM_USE_CODIPACK MFEM_USE_BENCHMARK MFEM_USE_PARELAG
      MFEM_USE_MOONOLITH MFEM_USE_ALGOIM MFEM_USE_ENZYME)
  foreach(var ${CONFIG_MK_BOOL_VARS})
    if (${var})
@@ -874,7 +915,7 @@ function(mfem_export_mk_files)
         "${cxx_std_flag} ${CMAKE_CXX_FLAGS_${BUILD_TYPE}} ${CMAKE_CXX_FLAGS}"
         MFEM_CXXFLAGS)
  set(MFEM_TPLFLAGS "")
-  foreach(dir ${TPL_INCLUDE_DIRS})
+  foreach(dir ${MFEM_TPL_INCLUDE_DIRS})
    set(MFEM_TPLFLAGS "${MFEM_TPLFLAGS} -I${dir}")
  endforeach()
  # TODO: MFEM_TPLFLAGS: add other TPL flags, in addition to the -I flags.
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -23,62 +23,6 @@
 #include "_config.hpp"
 #endif

-namespace mfem
-{
-
-#if (defined(MFEM_USE_CUDA) && defined(__CUDACC__)) || \
-    (defined(MFEM_USE_HIP) && defined(__HIPCC__))
-#define MFEM_HOST_DEVICE __host__ __device__
-#else
-#define MFEM_HOST_DEVICE
-#endif
-
-// MFEM precision configuration
-
-#if defined MFEM_USE_SINGLE && defined MFEM_USE_DOUBLE
-#error "DOUBLE and SINGLE precision cannot both be specified"
-#endif
-
-#ifdef MFEM_USE_SINGLE
-typedef float real_t;
-#elif defined MFEM_USE_DOUBLE
-typedef double real_t;
-#else
-#error "Either DOUBLE or SINGLE precision must be specified"
-#endif
-
-MFEM_HOST_DEVICE
-constexpr real_t operator""_r(long double v)
-{
-   return static_cast<real_t>(v);
-}
-
-MFEM_HOST_DEVICE
-constexpr real_t operator""_r(unsigned long long v)
-{
-   return static_cast<real_t>(v);
-}
-
-} // namespace mfem
-
-// Return value for main function in examples that should be skipped by testing
-// in some case. This return value prevents failures in testing.
-#define MFEM_SKIP_RETURN_VALUE 242
-
-// Request a global object to be instantiated for each thread in its TLS.
-#define MFEM_THREAD_LOCAL thread_local
-
-// MFEM_DEPRECATED macro to mark obsolete functions and methods
-// see https://stackoverflow.com/questions/295120/c-mark-as-deprecated
-#if defined(__GNUC__) || defined(__clang__)
-#define MFEM_DEPRECATED __attribute__((deprecated))
-#elif defined(_MSC_VER)
-#define MFEM_DEPRECATED __declspec(deprecated)
-#else
-#pragma message("WARNING: You need to implement MFEM_DEPRECATED for this compiler")
-#define MFEM_DEPRECATED
-#endif
-
 // Common configuration macros

 #if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 7)) || defined(__clang__)
@@ -86,31 +30,10 @@ constexpr real_t operator""_r(unsigned long long v)
 #endif

 // Windows specific options
-#if defined(_WIN32) && !defined(_USE_MATH_DEFINES)
+#ifdef _WIN32
 // Macro needed to get defines like M_PI from <cmath>. (Visual Studio C++ only?)
 #define _USE_MATH_DEFINES
 #endif
-// Macro MFEM_EXPORT: this macro is used when declaring exported global
-// variables and static class variables in public header files, e.g.:
-//    extern MFEM_EXPORT Geometry Geometries;
-//    static MFEM_EXPORT Device device_singleton;
-// In cases where a class contains multiple static variables, instead of marking
-// all such variables with MFEM_EXPORT, one can mark the class with MFEM_EXPORT,
-// e.g.:
-//    class MFEM_EXPORT MemoryManager ...
-// Note: MFEM's GitHub CI includes a shared MSVC build that will fail if a
-// variable that needs MFEM_EXPORT does not have it. However, builds with
-// optional external libraries are not tested and may require separate checks to
-// determine the necessity of MFEM_EXPORT.
-#if defined(_MSC_VER) && defined(MFEM_SHARED_BUILD)
-#ifdef mfem_EXPORTS
-#define MFEM_EXPORT __declspec(dllexport)
-#else
-#define MFEM_EXPORT __declspec(dllimport)
-#endif
-#else
-#define MFEM_EXPORT
-#endif
 // On Cygwin the option -std=c++11 prevents the definition of M_PI. Defining
 // the following macro allows us to get M_PI and some needed functions, e.g.
 // posix_memalign(), strdup(), strerror_r().
@@ -120,15 +43,6 @@ constexpr real_t operator""_r(unsigned long long v)

 // Check dependencies:

-// Define MFEM_MPI_REAL_T to be the appropriate MPI real type
-#ifdef MFEM_USE_MPI
-#ifdef MFEM_USE_SINGLE
-#define MFEM_MPI_REAL_T MPI_FLOAT
-#elif defined MFEM_USE_DOUBLE
-#define MFEM_MPI_REAL_T MPI_DOUBLE
-#endif
-#endif
-
 // Options that require MPI
 #ifndef MFEM_USE_MPI
 #ifdef MFEM_USE_SUPERLU
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -30,28 +30,19 @@
 #define MFEM_VERSION_MINOR (((MFEM_VERSION)/100)%100)
 #define MFEM_VERSION_PATCH ((MFEM_VERSION)%100)

-// The absolute path of the MFEM source prefix.
+// The absolute path of the MFEM source prefix
 // #define MFEM_SOURCE_DIR "@MFEM_SOURCE_DIR@"

-// The absolute path of the MFEM installation prefix.
+// The absolute path of the MFEM installation prefix
 // #define MFEM_INSTALL_DIR "@MFEM_INSTALL_DIR@"

 // Description of the git commit used to build MFEM.
 // #define MFEM_GIT_STRING "@MFEM_GIT_STRING@"

-// Enable shared library build of MFEM.
-// #define MFEM_SHARED_BUILD
-
 // Build the parallel MFEM library.
 // Requires an MPI compiler, and the libraries HYPRE and METIS.
 // #define MFEM_USE_MPI

-// Use double-precision floating point type
-// #define MFEM_USE_DOUBLE
-
-// Use single-precision floating point type
-// #define MFEM_USE_SINGLE
-
 // Enable debug checks in MFEM.
 // #define MFEM_DEBUG

@@ -94,10 +85,13 @@
 // Enable MFEM functionality based on the SUNDIALS libraries.
 // #define MFEM_USE_SUNDIALS

+// Enable MFEM functionality based on the Mesquite library.
+// #define MFEM_USE_MESQUITE
+
 // Enable MFEM functionality based on the SuiteSparse library.
 // #define MFEM_USE_SUITESPARSE

-// Enable MFEM functionality based on the SuperLU_DIST library.
+// Enable MFEM functionality based on the SuperLU library.
 // #define MFEM_USE_SUPERLU
 // #define MFEM_USE_SUPERLU5

@@ -108,40 +102,40 @@
 // Enable MFEM functionality based on the STRUMPACK library.
 // #define MFEM_USE_STRUMPACK

-// Enable MFEM features based on the Ginkgo library.
+// Enable MFEM features based on the Ginkgo library
 // #define MFEM_USE_GINKGO

 // Enable MFEM functionality based on the AmgX library.
 // #define MFEM_USE_AMGX

-// Enable secure socket streams based on the GNUTLS library.
+// Enable secure socket streams based on the GNUTLS library
 // #define MFEM_USE_GNUTLS

-// Enable Sidre support.
+// Enable Sidre support
 // #define MFEM_USE_SIDRE

-// Enable the use of SIMD in the high performance templated classes.
+// Enable the use of SIMD in the high performance templated classes
 // #define MFEM_USE_SIMD

-// Enable FMS support.
+// Enable FMS support
 // #define MFEM_USE_FMS

-// Enable Conduit support.
+// Enable Conduit support
 // #define MFEM_USE_CONDUIT

-// Enable functionality based on the NetCDF library (reading CUBIT files).
+// Enable functionality based on the NetCDF library (reading CUBIT files)
 // #define MFEM_USE_NETCDF

-// Enable functionality based on the PETSc library.
+// Enable functionality based on the PETSc library
 // #define MFEM_USE_PETSC

-// Enable functionality based on the SLEPc library.
+// Enable functionality based on the SLEPc library
 // #define MFEM_USE_SLEPC

 // Enable functionality based on the MPFR library.
 // #define MFEM_USE_MPFR

-// Enable MFEM functionality based on the PUMI library.
+// Enable MFEM functionality based on the PUMI library
 // #define MFEM_USE_PUMI

 // Enable Moonolith-based general interpolation between finite element spaces.
@@ -150,7 +144,7 @@
 // Enable MFEM functionality based on the HIOP library.
 // #define MFEM_USE_HIOP

-// Enable MFEM functionality based on the GSLIB library.
+// Enable MFEM functionality based on the GSLIB library
 // #define MFEM_USE_GSLIB

 // Build the NVIDIA GPU/CUDA-enabled version of the MFEM library.
@@ -192,13 +186,10 @@
 // Enable interface to the MKL CPardiso library.
 // #define MFEM_USE_MKL_CPARDISO

-// Enable interface to the MKL Pardiso library.
-// #define MFEM_USE_MKL_PARDISO
-
-// Use forward mode for automatic differentiation.
+// Use forward mode for automatic differentiation
 // #define MFEM_USE_ADFORWARD

-// Enable the use of the CoDiPack library for AD.
+// Enable the use of the CoDiPack library for AD
 // #define MFEM_USE_CODIPACK

 // Enable functionality based on the Google Benchmark library.
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,8 +18,6 @@ MFEM_GIT_STRING        = @MFEM_GIT_STRING@
 MFEM_USE_MPI           = @MFEM_USE_MPI@
 MFEM_USE_METIS         = @MFEM_USE_METIS@
 MFEM_USE_METIS_5       = @MFEM_USE_METIS_5@
-MFEM_USE_DOUBLE        = @MFEM_USE_DOUBLE@
-MFEM_USE_SINGLE        = @MFEM_USE_SINGLE@
 MFEM_DEBUG             = @MFEM_DEBUG@
 MFEM_USE_EXCEPTIONS    = @MFEM_USE_EXCEPTIONS@
 MFEM_USE_ZLIB          = @MFEM_USE_ZLIB@
@@ -31,6 +29,7 @@ MFEM_USE_OPENMP        = @MFEM_USE_OPENMP@
 MFEM_USE_MEMALLOC      = @MFEM_USE_MEMALLOC@
 MFEM_TIMER_TYPE        = @MFEM_TIMER_TYPE@
 MFEM_USE_SUNDIALS      = @MFEM_USE_SUNDIALS@
+MFEM_USE_MESQUITE      = @MFEM_USE_MESQUITE@
 MFEM_USE_SUITESPARSE   = @MFEM_USE_SUITESPARSE@
 MFEM_USE_SUPERLU       = @MFEM_USE_SUPERLU@
 MFEM_USE_SUPERLU5      = @MFEM_USE_SUPERLU5@
@@ -59,13 +58,11 @@ MFEM_USE_UMPIRE        = @MFEM_USE_UMPIRE@
 MFEM_USE_SIMD          = @MFEM_USE_SIMD@
 MFEM_USE_ADIOS2        = @MFEM_USE_ADIOS2@
 MFEM_USE_MKL_CPARDISO  = @MFEM_USE_MKL_CPARDISO@
-MFEM_USE_MKL_PARDISO   = @MFEM_USE_MKL_PARDISO@
 MFEM_USE_MOONOLITH     = @MFEM_USE_MOONOLITH@
 MFEM_USE_ADFORWARD     = @MFEM_USE_ADFORWARD@
 MFEM_USE_CODIPACK      = @MFEM_USE_CODIPACK@
 MFEM_USE_BENCHMARK     = @MFEM_USE_BENCHMARK@
 MFEM_USE_PARELAG       = @MFEM_USE_PARELAG@
-MFEM_USE_TRIBOL        = @MFEM_USE_TRIBOL@
 MFEM_USE_ENZYME        = @MFEM_USE_ENZYME@

 # Compiler, compile options, and link options
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,11 +19,8 @@ if (NOT CMAKE_BUILD_TYPE)
 endif()

 # MFEM options. Set to mimic the default "defaults.mk" file.
-option(BUILD_SHARED_LIBS "Enable shared library build of MFEM" OFF)
 option(MFEM_USE_MPI "Enable MPI parallel build" OFF)
 option(MFEM_USE_METIS "Enable METIS usage" ${MFEM_USE_MPI})
-set(MFEM_PRECISION "double" CACHE STRING
-    "Floating-point precision to use: single, or double")
 option(MFEM_USE_EXCEPTIONS "Enable the use of exceptions" OFF)
 option(MFEM_USE_ZLIB "Enable zlib for compressed data streams." OFF)
 option(MFEM_USE_LIBUNWIND "Enable backtrace for errors." OFF)
@@ -33,6 +30,7 @@ option(MFEM_USE_OPENMP "Enable the OpenMP backend" OFF)
 option(MFEM_USE_LEGACY_OPENMP "Enable legacy OpenMP usage" OFF)
 option(MFEM_USE_MEMALLOC "Enable the internal MEMALLOC option." ON)
 option(MFEM_USE_SUNDIALS "Enable SUNDIALS usage" OFF)
+option(MFEM_USE_MESQUITE "Enable MESQUITE usage" OFF)
 option(MFEM_USE_SUITESPARSE "Enable SuiteSparse usage" OFF)
 option(MFEM_USE_SUPERLU "Enable SuperLU_DIST usage" OFF)
 option(MFEM_USE_SUPERLU5 "Use the old SuperLU_DIST 5.1 version" OFF)
@@ -62,12 +60,10 @@ option(MFEM_USE_ADIOS2 "Enable ADIOS2" OFF)
 option(MFEM_USE_CALIPER "Enable Caliper support" OFF)
 option(MFEM_USE_ALGOIM "Enable Algoim support" OFF)
 option(MFEM_USE_MKL_CPARDISO "Enable MKL CPardiso" OFF)
-option(MFEM_USE_MKL_PARDISO "Enable MKL Pardiso" OFF)
 option(MFEM_USE_ADFORWARD "Enable forward mode for AD" OFF)
 option(MFEM_USE_CODIPACK "Enable automatic differentiation (AD) using CoDiPack" OFF)
 option(MFEM_USE_BENCHMARK "Enable Google Benchmark" OFF)
 option(MFEM_USE_PARELAG "Enable ParELAG" OFF)
-option(MFEM_USE_TRIBOL "Enable Tribol" OFF)
 option(MFEM_USE_ENZYME "Enable Enzyme" OFF)

 # Optional overrides for autodetected MPIEXEC and MPIEXEC_NUMPROC_FLAG
@@ -109,7 +105,12 @@ set(HYPRE_DIR "${MFEM_DIR}/../hypre/src/hypre" CACHE PATH
 # If hypre was compiled to depend on BLAS and LAPACK:
 # set(HYPRE_REQUIRED_PACKAGES "BLAS" "LAPACK" CACHE STRING
 #     "Packages that HYPRE depends on.")
-# CUDA and HIP dependencies for HYPRE are handled in FindHYPRE.cmake.
+if (MFEM_USE_CUDA)
+   # This is only necessary when hypre is built with cuda:
+   set(HYPRE_REQUIRED_LIBRARIES "-lcusparse" "-lcurand" CACHE STRING
+       "Libraries that HYPRE depends on.")
+endif()
+# HIP dependency for HYPRE is handled in FindHYPRE.cmake.

 set(METIS_DIR "${MFEM_DIR}/../metis-4.0" CACHE PATH "Path to the METIS library.")

@@ -123,6 +124,9 @@ set(SUNDIALS_DIR "${MFEM_DIR}/../sundials-5.0.0/instdir" CACHE PATH
 # set(SUNDIALS_REQUIRED_PACKAGES "SuiteSparse/KLU/AMD/BTF/COLAMD/config"
 #     CACHE STRING "Additional packages required by SUNDIALS.")

+set(MESQUITE_DIR "${MFEM_DIR}/../mesquite-2.99" CACHE PATH
+    "Path to the Mesquite library.")
+
 set(SuiteSparse_DIR "${MFEM_DIR}/../SuiteSparse" CACHE PATH
    "Path to the SuiteSparse library.")
 set(SuiteSparse_REQUIRED_PACKAGES "BLAS" "METIS"
@@ -133,18 +137,16 @@ set(ParMETIS_DIR "${MFEM_DIR}/../parmetis-4.0.3" CACHE PATH
 set(ParMETIS_REQUIRED_PACKAGES "METIS" CACHE STRING
    "Additional packages required by ParMETIS.")

-set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_8.1.2" CACHE PATH
+set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_6.3.1" CACHE PATH
    "Path to the SuperLU_DIST library.")
 # SuperLU_DIST may also depend on "OpenMP", depending on how it was compiled.
-set(SuperLUDist_REQUIRED_PACKAGES "MPI" "ParMETIS" "METIS"
-    "LAPACK" "BLAS" CACHE STRING
+set(SuperLUDist_REQUIRED_PACKAGES "MPI" "BLAS" "ParMETIS" CACHE STRING
    "Additional packages required by SuperLU_DIST.")

-set(MUMPS_DIR "${MFEM_DIR}/../MUMPS_5.5.0" CACHE PATH
+set(MUMPS_DIR "${MFEM_DIR}/../MUMPS_5.2.0" CACHE PATH
    "Path to the MUMPS library.")
-# MUMPS may also depend on "OpenMP", depending on how it was compiled.
-set(MUMPS_REQUIRED_PACKAGES "MPI" "MPI_Fortran" "ParMETIS" "METIS"
-    "ScaLAPACK" "LAPACK" "BLAS" CACHE STRING
+# Packages required by MUMPS, depending on how it was compiled.
+set(MUMPS_REQUIRED_PACKAGES "MPI" "BLAS" "METIS" "ScaLAPACK" CACHE STRING
    "Additional packages required by MUMPS.")
 # If the MPI package does not find all required Fortran libraries:
 # set(MUMPS_REQUIRED_LIBRARIES "gfortran" "mpi_mpifh" CACHE STRING
@@ -155,8 +157,7 @@ set(STRUMPACK_DIR "${MFEM_DIR}/../STRUMPACK-build" CACHE PATH
 # STRUMPACK may also depend on "OpenMP", depending on how it was compiled.
 # Starting with v2.2.0 of STRUMPACK, ParMETIS and Scotch are optional.
 set(STRUMPACK_REQUIRED_PACKAGES "MPI" "MPI_Fortran" "ParMETIS" "METIS"
-    "Scotch/ptscotch/ptscotcherr/scotch/scotcherr"
-    "ScaLAPACK" "LAPACK" "BLAS" CACHE STRING
+    "ScaLAPACK" "Scotch/ptscotch/ptscotcherr/scotch/scotcherr" CACHE STRING
    "Additional packages required by STRUMPACK.")
 # If the MPI package does not find all required Fortran libraries:
 # set(STRUMPACK_REQUIRED_LIBRARIES "gfortran" "mpi_mpifh" CACHE STRING
@@ -187,7 +188,6 @@ set(GNUTLS_DIR "" CACHE PATH "Path to the GnuTLS library.")

 set(GSLIB_DIR "" CACHE PATH "Path to the GSLIB library.")

-set(HDF5_DIR "/usr" CACHE PATH "Path to the HDF5 library.")
 set(NETCDF_DIR "" CACHE PATH "Path to the NetCDF library.")
 set(NetCDF_REQUIRED_PACKAGES "HDF5/C/HL" CACHE STRING
    "Additional packages required by NetCDF.")
@@ -213,15 +213,8 @@ set(CONDUIT_DIR "${MFEM_DIR}/../conduit" CACHE PATH

 set(AXOM_DIR "${MFEM_DIR}/../axom" CACHE PATH "Path to the Axom library.")
 # May need to add "Boost" as requirement.
-if (MFEM_USE_SIDRE)
-    if (MFEM_USE_MPI)
-        set(Axom_REQUIRED_PACKAGES "Conduit/blueprint/blueprint_mpi/relay/relay_mpi" CACHE STRING
-            "Additional packages required by Axom.")
-    elseif()
-        set(Axom_REQUIRED_PACKAGES "Conduit/blueprint/relay" CACHE STRING
-            "Additional packages required by Axom.")
-    endif()
-endif()
+set(Axom_REQUIRED_PACKAGES "Conduit/relay/blueprint" CACHE STRING
+    "Additional packages required by Axom.")

 set(PUMI_DIR "${MFEM_DIR}/../pumi-2.1.0" CACHE STRING
    "Directory where PUMI is installed")
@@ -235,16 +228,19 @@ set(MKL_CPARDISO_DIR "" CACHE STRING "MKL installation path.")
 set(MKL_MPI_WRAPPER_LIB "mkl_blacs_mpich_lp64" CACHE STRING "MKL MPI wrapper library")
 set(MKL_LIBRARY_DIR "" CACHE STRING "Custom library subdirectory")

-set(MKL_PARDISO_DIR "" CACHE STRING "MKL installation path.")
-
 set(OCCA_DIR "${MFEM_DIR}/../occa" CACHE PATH "Path to OCCA")
 set(RAJA_DIR "${MFEM_DIR}/../raja" CACHE PATH "Path to RAJA")
+# If RAJA is built with external CAMP:
+# set(RAJA_REQUIRED_PACKAGES "camp"
+#     CACHE STRING "Packages that RAJA depends on.")
+# set(camp_DIR "${MFEM_DIR}/../camp/lib/cmake/camp"
+#     CACHE PATH "Path to CAMP CMake files.")
 set(CEED_DIR "${MFEM_DIR}/../libCEED" CACHE PATH "Path to libCEED")
 set(UMPIRE_DIR "${MFEM_DIR}/../umpire" CACHE PATH "Path to Umpire")
 set(CALIPER_DIR "${MFEM_DIR}/../caliper" CACHE PATH "Path to Caliper")
 set(BLITZ_DIR "${MFEM_DIR}/../blitz" CACHE PATH "Path to Blitz")
 set(ALGOIM_DIR "${MFEM_DIR}/../algoim" CACHE PATH "Path to Algoim")
-set(Algoim_REQUIRED_PACKAGES "Blitz" CACHE STRING
+set(ALGOIM_REQUIRED_PACKAGES "BLITZ" CACHE STRING
    "Packages that ALGOIM depends on.")

 set(BENCHMARK_DIR "${MFEM_DIR}/../google-benchmark" CACHE PATH
@@ -258,10 +254,6 @@ set(PARELAG_INCLUDE_DIRS "${PARELAG_DIR}/src;${PARELAG_DIR}/build/src" CACHE
 set(PARELAG_LIBRARIES "${PARELAG_DIR}/build/src/libParELAG.a" CACHE STRING
    "The ParELAG library.")

-set(TRIBOL_DIR "${MFEM_DIR}/../tribol" CACHE PATH "Path to Tribol")
-set(Tribol_REQUIRED_PACKAGES "Axom/core/mint/slam/slic" CACHE STRING 
-    "Additional packages required by Tribol")
-
 set(BLAS_INCLUDE_DIRS "" CACHE STRING "Path to BLAS headers.")
 set(BLAS_LIBRARIES "" CACHE STRING "The BLAS library.")
 set(LAPACK_INCLUDE_DIRS "" CACHE STRING "Path to LAPACK headers.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -58,7 +58,7 @@ HIP_CXX = hipcc
 # example: gfx600 (tahiti), gfx700 (kaveri), gfx701 (hawaii), gfx801 (carrizo),
 # gfx900, gfx1010, etc.
 HIP_ARCH = gfx900
-HIP_FLAGS = --offload-arch=$(HIP_ARCH)
+HIP_FLAGS = --amdgpu-target=$(HIP_ARCH)
 HIP_XCOMPILER =
 HIP_XLINKER   = -Wl,

@@ -120,7 +120,6 @@ MFEM_MPI_NP = 4
 MFEM_USE_MPI           = NO
 MFEM_USE_METIS         = $(MFEM_USE_MPI)
 MFEM_USE_METIS_5       = NO
-MFEM_PRECISION         = double
 MFEM_DEBUG             = NO
 MFEM_USE_EXCEPTIONS    = NO
 MFEM_USE_ZLIB          = NO
@@ -132,6 +131,7 @@ MFEM_USE_LEGACY_OPENMP = NO
 MFEM_USE_MEMALLOC      = YES
 MFEM_TIMER_TYPE        = $(if $(NOTMAC),2,4)
 MFEM_USE_SUNDIALS      = NO
+MFEM_USE_MESQUITE      = NO
 MFEM_USE_SUITESPARSE   = NO
 MFEM_USE_SUPERLU       = NO
 MFEM_USE_SUPERLU5      = NO
@@ -161,27 +161,13 @@ MFEM_USE_UMPIRE        = NO
 MFEM_USE_SIMD          = NO
 MFEM_USE_ADIOS2        = NO
 MFEM_USE_MKL_CPARDISO  = NO
-MFEM_USE_MKL_PARDISO   = NO
 MFEM_USE_MOONOLITH     = NO
 MFEM_USE_ADFORWARD     = NO
 MFEM_USE_CODIPACK      = NO
 MFEM_USE_BENCHMARK     = NO
 MFEM_USE_PARELAG       = NO
-MFEM_USE_TRIBOL        = NO
 MFEM_USE_ENZYME        = NO

-# Process MFEM_PRECISION -> MFEM_USE_SINGLE, MFEM_USE_DOUBLE
-ifneq ($(filter double Double DOUBLE,$(MFEM_PRECISION)),)
-   MFEM_USE_DOUBLE = YES
-   MFEM_USE_SINGLE = NO
-else ifneq ($(filter single Single SINGLE,$(MFEM_PRECISION)),)
-   MFEM_USE_DOUBLE = NO
-   MFEM_USE_SINGLE = YES
-else ifeq ($(MAKECMDGOALS),config)
-   $(error Invalid floating-point precision: \
-     MFEM_PRECISION = $(MFEM_PRECISION))
-endif
-
 # MPI library compile and link flags
 # These settings are used only when building MFEM with MPI + HIP
 ifeq ($(MFEM_USE_MPI)$(MFEM_USE_HIP),YESYES)
@@ -193,7 +179,7 @@ ifeq ($(MFEM_USE_MPI)$(MFEM_USE_HIP),YESYES)
 endif

 # ROCM/HIP directory such that ROCM/HIP libraries like rocsparse and rocrand are
-# found in $(HIP_DIR)/lib, usually as links. Typically, this directory is of
+# found in $(HIP_DIR)/lib, usually as links. Typically, this directoory is of
 # the form /opt/rocm-X.Y.Z which is called ROCM_PATH by hipconfig.
 ifeq ($(MFEM_USE_HIP),YES)
   HIP_DIR := $(patsubst %/,%,$(dir $(shell which $(HIP_CXX))))
@@ -265,28 +251,26 @@ POSIX_CLOCKS_LIB = -lrt
 # SUNDIALS library configuration
 # For sundials_nvecmpiplusx and nvecparallel remember to build with MPI_ENABLE=ON
 # and modify cmake variables for hypre for sundials
-SUNDIALS_DIR = @MFEM_DIR@/../sundials-5.0.0/instdir
-# SUNDIALS >= 6.4.0 requires C++14:
-ifeq ($(MFEM_USE_SUNDIALS),YES)
-   BASE_FLAGS = -std=c++14
-endif
-SUNDIALS_OPT = -I$(SUNDIALS_DIR)/include
-SUNDIALS_LIB = $(XLINKER)-rpath,$(SUNDIALS_DIR)/lib64\
- $(XLINKER)-rpath,$(SUNDIALS_DIR)/lib\
- -L$(SUNDIALS_DIR)/lib64 -L$(SUNDIALS_DIR)/lib\
+SUNDIALS_DIR    = @MFEM_DIR@/../sundials-5.0.0/instdir
+SUNDIALS_OPT    = -I$(SUNDIALS_DIR)/include
+SUNDIALS_LIBDIR = $(wildcard $(SUNDIALS_DIR)/lib*)
+SUNDIALS_LIB    = $(XLINKER)-rpath,$(SUNDIALS_LIBDIR) -L$(SUNDIALS_LIBDIR)\
 -lsundials_arkode -lsundials_cvodes -lsundials_nvecserial -lsundials_kinsol
+
 ifeq ($(MFEM_USE_MPI),YES)
   SUNDIALS_LIB += -lsundials_nvecparallel -lsundials_nvecmpiplusx
 endif
 ifeq ($(MFEM_USE_CUDA),YES)
   SUNDIALS_LIB += -lsundials_nveccuda
 endif
-ifeq ($(MFEM_USE_HIP),YES)
-   SUNDIALS_LIB += -lsundials_nvechip
-endif
 # If SUNDIALS was built with KLU:
 # MFEM_USE_SUITESPARSE = YES

+# MESQUITE library configuration
+MESQUITE_DIR = @MFEM_DIR@/../mesquite-2.99
+MESQUITE_OPT = -I$(MESQUITE_DIR)/include
+MESQUITE_LIB = -L$(MESQUITE_DIR)/lib -lmesquite
+
 # SuiteSparse library configuration
 LIB_RT = $(if $(NOTMAC),-lrt,)
 SUITESPARSE_DIR = @MFEM_DIR@/../SuiteSparse
@@ -302,10 +286,10 @@ ifeq ($(MFEM_USE_SUPERLU5),YES)
   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib -L$(SUPERLU_DIR)/lib\
      -lsuperlu_dist_5.1.0
 else
-   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_8.1.2
+   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_6.3.1
   SUPERLU_OPT = -I$(SUPERLU_DIR)/include
   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib64 -L$(SUPERLU_DIR)/lib64\
-      -lsuperlu_dist $(LAPACK_LIB)
+      -lsuperlu_dist -lblas
 endif

 # SCOTCH library configuration (required by STRUMPACK <= v2.1.0, optional in
@@ -325,55 +309,33 @@ SCALAPACK_LIB = -L$(SCALAPACK_DIR)/lib -lscalapack $(LAPACK_LIB)
 MPI_FORTRAN_LIB = -lmpifort
 # OpenMPI:
 # MPI_FORTRAN_LIB = -lmpi_mpifh
-# Additional Fortran library:
+# Additional Fortan library:
 # MPI_FORTRAN_LIB += -lgfortran

 # MUMPS library configuration
-MUMPS_DIR = @MFEM_DIR@/../MUMPS_5.5.0
+MUMPS_DIR = @MFEM_DIR@/../MUMPS_5.2.0
 MUMPS_OPT = -I$(MUMPS_DIR)/include
-MUMPS_LIB = $(XLINKER)-rpath,$(MUMPS_DIR)/lib -L$(MUMPS_DIR)/lib
-ifeq ($(MFEM_USE_SINGLE),YES)
-   MUMPS_LIB += -lsmumps
-else
-   MUMPS_LIB += -ldmumps
-endif
-MUMPS_LIB += -lmumps_common -lpord $(SCALAPACK_LIB) $(LAPACK_LIB) $(MPI_FORTRAN_LIB)
+MUMPS_LIB = $(XLINKER)-rpath,$(MUMPS_DIR)/lib -L$(MUMPS_DIR)/lib -ldmumps\
+ -lmumps_common -lpord $(SCALAPACK_LIB) $(LAPACK_LIB) $(MPI_FORTRAN_LIB)

 # STRUMPACK library configuration
 STRUMPACK_DIR = @MFEM_DIR@/../STRUMPACK-build
-ifeq ($(MFEM_USE_STRUMPACK),YES)
-   BASE_FLAGS = -std=c++14
-endif
 STRUMPACK_OPT = -I$(STRUMPACK_DIR)/include $(SCOTCH_OPT)
 # If STRUMPACK was build with OpenMP support, the following may be need:
 # STRUMPACK_OPT += $(OPENMP_OPT)
 STRUMPACK_LIB = -L$(STRUMPACK_DIR)/lib -lstrumpack $(MPI_FORTRAN_LIB)\
 $(SCOTCH_LIB) $(SCALAPACK_LIB)

-# Ginkgo library configuration
+# Ginkgo library configuration (currently not needed)
 GINKGO_DIR = @MFEM_DIR@/../ginkgo/install
-GINKGO_SEARCH_DIR = $(subst @MFEM_DIR@,$(MFEM_DIR),$(GINKGO_DIR))
 GINKGO_BUILD_TYPE=Release
 ifeq ($(MFEM_USE_GINKGO),YES)
   BASE_FLAGS = -std=c++14
 endif
 GINKGO_OPT = -isystem $(GINKGO_DIR)/include
-GINKGO_LIB_DIR = $(sort $(dir $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dll)))
-GINKGO_LINK_LIB_DIR = $(GINKGO_DIR)$(subst $(GINKGO_SEARCH_DIR),,$(GINKGO_LIB_DIR))
-ALL_GINKGO_LIBS_DEBUG = $(notdir $(basename $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.dll)))
-ALL_GINKGO_LIBS = $(notdir $(basename $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dll)))
+GINKGO_LIB_DIR = $(sort $(dir $(wildcard $(GINKGO_DIR)/lib*/libginkgo*.a  $(GINKGO_DIR)/lib*/libginkgo*.so $(GINKGO_DIR)/lib*/libginkgo*.dylib $(GINKGO_DIR)/lib*/libginkgo*.dll)))
+ALL_GINKGO_LIBS_DEBUG = $(notdir $(basename $(wildcard $(GINKGO_DIR)/lib*/libginkgo*d.a  $(GINKGO_DIR)/lib*/libginkgo*d.so $(GINKGO_DIR)/lib*/libginkgo*d.dylib $(GINKGO_DIR)/lib*/libginkgo*d.dll)))
+ALL_GINKGO_LIBS = $(notdir $(basename $(wildcard $(GINKGO_DIR)/lib*/libginkgo*.a  $(GINKGO_DIR)/lib*/libginkgo*.so $(GINKGO_DIR)/lib*/libginkgo*.dylib $(GINKGO_DIR)/lib*/libginkgo*.dll)))
 ALL_GINKGO_LIBS_RELEASE = $(filter-out $(ALL_GINKGO_LIBS_DEBUG),$(ALL_GINKGO_LIBS))
 GINKGO_LINK = $(subst libginkgo,-lginkgo,$(ALL_GINKGO_LIBS_RELEASE))
 ifeq ($(GINKGO_BUILD_TYPE),Debug)
@@ -382,13 +344,12 @@ ifeq ($(GINKGO_BUILD_TYPE),Debug)
  endif
 else
 endif
-GINKGO_LIB = $(XLINKER)-rpath,$(GINKGO_LINK_LIB_DIR) -L$(GINKGO_LINK_LIB_DIR)\
- $(GINKGO_LINK)
+GINKGO_LIB = $(XLINKER)-rpath,$(GINKGO_LIB_DIR) -L$(GINKGO_LIB_DIR) $(GINKGO_LINK)

 # AmgX library configuration
 AMGX_DIR = @MFEM_DIR@/../amgx
 AMGX_OPT = -I$(AMGX_DIR)/include
-AMGX_LIB = -L$(AMGX_DIR)/lib -lamgx -lcusparse -lcusolver -lcublas -lnvToolsExt
+AMGX_LIB = -lcusparse -lcusolver -lcublas -lnvToolsExt -L$(AMGX_DIR)/lib -lamgx

 # GnuTLS library configuration
 GNUTLS_OPT =
@@ -497,11 +458,11 @@ GSLIB_LIB = -L$(GSLIB_DIR)/lib -lgs

 # CUDA library configuration
 CUDA_OPT =
-CUDA_LIB = -lcusparse -lcusolver -lcublas
+CUDA_LIB = -lcusparse

 # HIP library configuration
 HIP_OPT =
-HIP_LIB = -L$(HIP_DIR)/lib $(XLINKER)-rpath,$(HIP_DIR)/lib -lhipsparse -lhipblas
+HIP_LIB = -L$(HIP_DIR)/lib $(XLINKER)-rpath,$(HIP_DIR)/lib -lhipsparse

 # OCCA library configuration
 OCCA_DIR = @MFEM_DIR@/../occa
@@ -511,16 +472,7 @@ OCCA_LIB = $(XLINKER)-rpath,$(OCCA_DIR)/lib -L$(OCCA_DIR)/lib -locca
 # CALIPER library configuration
 CALIPER_DIR = @MFEM_DIR@/../caliper
 CALIPER_OPT = -I$(CALIPER_DIR)/include
-CALIPER_LIB = $(XLINKER)-rpath,$(CALIPER_DIR)/lib64 $(XLINKER)-rpath,$(CALIPER_DIR)/lib -L$(CALIPER_DIR)/lib64 -L$(CALIPER_DIR)/lib -lcaliper
-
-ifdef ADIAK_DIR
-   CALIPER_OPT += -I$(ADIAK_DIR)/include
-   CALIPER_LIB += $(XLINKER)-rpath,$(ADIAK_DIR)/lib64 $(XLINKER)-rpath,$(ADIAK_DIR)/lib -L$(ADIAK_DIR)/lib64 -L$(ADIAK_DIR)/lib -ladiak
-endif
-ifdef GOTCHA_DIR
-   CALIPER_OPT += -I$(GOTCHA_DIR)/include
-   CALIPER_LIB += $(XLINKER)-rpath,$(GOTCHA_DIR)/lib64 $(XLINKER)-rpath,$(GOTCHA_DIR)/lib -L$(GOTCHA_DIR)/lib64 -L$(GOTCHA_DIR)/lib -lgotcha
-endif
+CALIPER_LIB = $(XLINKER)-rpath,$(CALIPER_DIR)/lib64 -L$(CALIPER_DIR)/lib64 -lcaliper

 # BLITZ library configuration
 BLITZ_DIR = @MFEM_DIR@/../blitz
@@ -543,29 +495,20 @@ CEED_OPT = -I$(CEED_DIR)/include
 CEED_LIB = $(XLINKER)-rpath,$(CEED_DIR)/lib -L$(CEED_DIR)/lib -lceed

 # RAJA library configuration
-ifeq ($(MFEM_USE_RAJA),YES)
-   BASE_FLAGS = -std=c++14
-endif
 RAJA_DIR = @MFEM_DIR@/../raja
 RAJA_OPT = -I$(RAJA_DIR)/include
 ifdef CUB_DIR
   RAJA_OPT += -I$(CUB_DIR)
 endif
-
-CAMP_LIB = -lcamp
 ifdef CAMP_DIR
   RAJA_OPT += -I$(CAMP_DIR)/include
-   CAMP_LIB = $(XLINKER)-rpath,$(CAMP_DIR)/lib -L$(CAMP_DIR)/lib -lcamp
 endif
-RAJA_LIB = $(XLINKER)-rpath,$(RAJA_DIR)/lib -L$(RAJA_DIR)/lib -lRAJA $(CAMP_LIB)
+RAJA_LIB = $(XLINKER)-rpath,$(RAJA_DIR)/lib -L$(RAJA_DIR)/lib -lRAJA

 # UMPIRE library configuration
-ifeq ($(MFEM_USE_UMPIRE),YES)
-   BASE_FLAGS = -std=c++14
-endif
 UMPIRE_DIR = @MFEM_DIR@/../umpire
 UMPIRE_OPT = -I$(UMPIRE_DIR)/include $(if $(CAMP_DIR), -I$(CAMP_DIR)/include)
-UMPIRE_LIB = -L$(UMPIRE_DIR)/lib -lumpire $(CAMP_LIB)
+UMPIRE_LIB = -L$(UMPIRE_DIR)/lib -lumpire

 # MKL CPardiso library configuration
 MKL_CPARDISO_DIR ?=
@@ -576,29 +519,11 @@ MKL_CPARDISO_LIB = $(XLINKER)-rpath,$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
   -L$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR) -l$(MKL_MPI_WRAPPER)\
   -lmkl_intel_lp64 -lmkl_sequential -lmkl_core

-# MKL Pardiso library configuration
-MKL_PARDISO_DIR ?=
-MKL_LIBRARY_SUBDIR ?= lib
-MKL_PARDISO_OPT = -I$(MKL_PARDISO_DIR)/include
-MKL_PARDISO_LIB = $(XLINKER)-rpath,$(MKL_PARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
-   -L$(MKL_PARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
-   -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
-
 # PARELAG library configuration
 PARELAG_DIR = @MFEM_DIR@/../parelag
 PARELAG_OPT = -I$(PARELAG_DIR)/src -I$(PARELAG_DIR)/build/src
 PARELAG_LIB = -L$(PARELAG_DIR)/build/src -lParELAG

-# Tribol library configuration
-ifeq ($(MFEM_USE_TRIBOL),YES)
-   BASE_FLAGS = -std=c++14
-endif
-AXOM_DIR = @MFEM_DIR@/../axom
-TRIBOL_DIR = @MFEM_DIR@/../tribol
-TRIBOL_OPT = -I$(TRIBOL_DIR)/include -I$(AXOM_DIR)/include
-TRIBOL_LIB = -L$(TRIBOL_DIR)/lib -ltribol -lredecomp -L$(AXOM_DIR)/lib -laxom_mint\
-   -laxom_slam -laxom_slic -laxom_core
-
 # Enzyme configuration

 # If you want to enable automatic differentiation at compile time, use the
@@ -19,7 +19,9 @@ RUN apt-get update && \
    apt-get install -y libcurl4-openssl-dev libssl-dev

 ENV PATH=$PATH:/opt/mfem-view/bin
+ENV LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/mfem-view/lib:/opt/mfem-view/lib64
 ENV DEBIAN_FRONTEND=noninteractive

 # The user will see the view on shell into the container
 WORKDIR /opt/mfem-view
+ENTRYPOINT ["/bin/bash"]
@@ -34,14 +34,14 @@ RUN cd /opt/mfem-env && \
    . /opt/spack/share/spack/setup-env.sh && \
    spack env activate . && \
    spack develop --path /code mfem@master+examples+miniapps && \
-    spack add mfem@master+examples+miniapps && \
-    spack install
+    spack add mfem@master+examples+miniapps # && \
+#    spack install

 # ensure mfem always on various paths
-RUN cd /opt/mfem-env && \
-    spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh
+#RUN cd /opt/mfem-env && \
+#    spack env activate --sh -d . >> /etc/profile.d/z10_spack_environment.sh

 # Present the software install when we shell in
 # The view is at /opt/mfem-env/.spack-env/view
-WORKDIR /opt/software
-ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l", "-c"]
+#WORKDIR /opt/software
+#ENTRYPOINT ["/bin/bash", "--rcfile", "/etc/profile", "-l", "-c"]
@@ -7,31 +7,21 @@ You can use this image for a demo of using mfem! 🎉️
 Updated containers are built and deployed on merges to the main branch and releases.
 If you want to request a build on demand, you can [manually run the workflow](https://docs.github.com/en/actions/managing-workflow-runs/manually-running-a-workflow) thanks to the workflow dispatch event.

-## Usage
+### Usage

-We provide two containers, which you can either build or use directly from
-[GitHub packages](https://github.com/orgs/mfem/packages?repo_name=mfem).
-
- - `ghcr.io/mfem/mfem-ubuntu-base`: a "build from scratch" for mfem
- - `ghcr.io/mfem/mfem-ubuntu`: a quick build that uses the base container
-
-In the above, "ghcr.io" means "GitHub Container Registry" and
+Here is how to build the container. Note that we build so it belongs to the same
+namespace as the repository here. "ghcr.io" means "GitHub Container Registry" and
 is the [GitHub packages](https://github.com/features/packages) registry that supports
-Docker images and other OCI artifacts. 
-
-### Ubuntu
-
-> Use or build this container for a multi-stage, slimmer base to develop on top of mfem
-
-Note that this container is provided on GitHub packages [here](https://github.com/mfem/mfem/pkgs/container/mfem-ubuntu)
-so you don't need to build it. However, if you want to, you can do the following:
+ Docker images and other OCI artifacts. From the root of the repository:

 ```bash
 $ docker build -f config/docker/Dockerfile -t ghcr.io/mfem/mfem-ubuntu .
+$ docker build -f config/docker/Dockerfile.base -t ghcr.io/mfem/mfem-ubuntu-base .
 ```

-Note that this will pull the base image. If you want to rebuild it, see [ubuntu base](#ubuntu-base)
-below. Once you have built (or prefer to pull) you can shell into the container as follows:
+### Shell Ubuntu
+
+To shell into the container:

 ```bash
 $ docker run -it ghcr.io/mfem/mfem-ubuntu
@@ -47,13 +37,39 @@ bin  etc  include  lib  libexec  sbin  share  var
 - Examples are in share/mfem/examples
 - Examples are in share/mfem/miniapps

-Using this container, if you want to develop a tool that _uses_ mfem, you can find the libraries / includes in:
+You can read more about interaction with these examples and miniapps below.
+
+### Shell Ubuntu Base
+
+To shell into the container:

 ```bash
-$ ls include/ | grep mfem
-mfem
-mfem-performance.hpp
-mfem.hpp
+$ docker run -it ghcr.io/mfem/mfem-ubuntu-base bash
+```
+
+Off the bat, you can see mfem libraries are in your path so you can jump into development:
+
+```bash
+env | grep mfem
+```
+```bash
+PKG_CONFIG_PATH=/opt/mfem-env/.spack-env/view/lib/pkgconfig:/opt/mfem-env/.spack-env/view/share/pkgconfig:/opt/mfem-env/.spack-env/view/lib64/pkgconfig
+PWD=/opt/mfem-env
+MANPATH=/opt/mfem-env/.spack-env/view/share/man:/opt/mfem-env/.spack-env/view/man:
+CMAKE_PREFIX_PATH=/opt/mfem-env/.spack-env/view
+SPACK_ENV=/opt/mfem-env
+ACLOCAL_PATH=/opt/mfem-env/.spack-env/view/share/aclocal
+LD_LIBRARY_PATH=/opt/mfem-env/.spack-env/view/lib:/opt/mfem-env/.spack-env/view/lib64
+PATH=/opt/mfem-env/.spack-env/view/bin:/opt/view/bin:/opt/spack/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+```
+
+#### Examples and MiniApps
+
+If you want to develop a tool that _uses_ mfem, you can find the built libraries in:
+
+```
+$ ls /opt/mfem-env/.spack-env/view/
+bin  etc  include  lib  libexec  sbin  share  var
 ```

 And yes, this is the working directory when you shell into the container!
@@ -63,16 +79,6 @@ You can find the examples here:
 ```bash
 cd share/mfem/examples
 ```
-
-Try quickly setting the `LD_LIBRARY_PATH` so we can see the shared libraries
-we need:
-
-```bash
-export LD_LIBRARY_PATH=/opt/mfem-view/lib:$LD_LIBRARY_PATH
-```
-
-And then run:
-
 ```bash
 $ ./ex0
 Options used:
@@ -91,6 +97,7 @@ Number of unknowns: 101
 Average reduction factor = 0.140201
 ```

+Try running a few, and look at the associated .cpp file for the source code!
 You can also explore the "mini apps," also in share/mfem, but under miniapps.

 ```bash
@@ -123,87 +130,18 @@ Rule:
 Applying rule...done.
 ```

-Have fun! As a reminder, this container is ideal for developing your own
-applications that might use mfem, or having a nice environment to test out
-examples.
+Have fun!


-### Ubuntu Base
-
-> Use this build for a development environment with spack and mfem
-
-This container is also [provided on GitHub packages](https://github.com/mfem/mfem/pkgs/container/mfem-ubuntu-base), 
-however you can build it locally too:
+#### Your own App
+If you want to develop with your own code base
+(and mfem as is in the container) you can bind to somewhere else in the container (e.g., src)

 ```bash
-$ docker build -f config/docker/Dockerfile.base -t ghcr.io/mfem/mfem-ubuntu-base .
-```
-
-To shell into the container:
-
-```bash
-$ docker run -it ghcr.io/mfem/mfem-ubuntu-base bash
-```
-
-Change directory to the mfem environment, setup spack, and activate the environment:
-
-```bash
-source /opt/spack/share/spack/setup-env.sh
-cd /opt/mfem-env/
-spack env activate .
-```
-
-Note that this environment is installing to the view at `/opt/view`. Since the environment
-knows to install mfem from `/code` this means that you could make changes in the container (or bind
-`/code` to your container) and then update spack:
-
-```bash
-# Note that concretization takes a hot minute!
-$ spack install
-```
-
-And if you want to load mfem:
-
-```bash
-$ spack load mfem
-$ env | grep mfem
-```
-
-In this development container, you can find the examples and miniapps alongside
-mfem under `/code`:
-
-```bash
-cd /code/examples
-```
-```bash
-$ ./ex0
-```
-```console
-Options used:
-   --mesh ../data/star.mesh
-   --order 1
-Number of unknowns: 101
-   Iteration :   0  (B r, r) = 0.184259
-   Iteration :   1  (B r, r) = 0.102754
-   Iteration :   2  (B r, r) = 0.00558141
-   Iteration :   3  (B r, r) = 1.5247e-05
-   Iteration :   4  (B r, r) = 1.13807e-07
-   Iteration :   5  (B r, r) = 6.27231e-09
-   Iteration :   6  (B r, r) = 3.76268e-11
-   Iteration :   7  (B r, r) = 6.07423e-13
-   Iteration :   8  (B r, r) = 4.10615e-15
-Average reduction factor = 0.140201
-```
-
-This container is likely ideal for someone that wants to develop mfem itself.
-For other use cases, we recommend using the slimmer image. As an example,
-if you want to develop with your own code base (and mfem as is in the container) 
-you can bind to somewhere else in the container (e.g., src)
-
-```bash
-$ docker run -it ghcr.io/mfem/mfem-ubuntu-base -v $PWD:/code bash
+$ docker run -it ghcr.io/mfem/mfem-ubuntu-base -v $PWD:/src bash
 ```

 In the above, we can pretend your project is in the present working directory (PWD) and we are
 binding to source. You can then use the mfem in the container for development, and if you
 want to distribute your library or app in a container, you can use the mfem container as the base.
+
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -9,11 +9,7 @@
 // terms of the BSD-3 license. We welcome feedback and contributions, see file
 // CONTRIBUTING.md for details.

-#ifdef MFEM_USE_SINGLE
-#include "smumps_c.h"
-#else
 #include "dmumps_c.h"
-#endif
 #include <string>
 #include <iostream>
 #include <algorithm>
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -21,7 +21,6 @@ if [[ "${option}" == "--help" ]]; then
  echo "  --copyright"
  echo "  --license"
  echo "  --release"
-  echo "  --math"
  echo "  --style"
  echo "  --history"
  echo ""
@@ -36,8 +35,8 @@ cd $(git rev-parse --show-toplevel)
 # copyright check
 copyright=true
 if [[ "${option}" == "--copyright" || "${option}" == "" ]]; then
-  if git grep -n "^\(#\|//\).*Copyright.*2010-20\(2[^4]\|[^2].\)" > matches.txt; then
-    echo "Please update the following files to Copyright (c) 2010-2024:"
+  if git grep -l "^\(#\|//\).*\(\-2021\|\ 2010,\)" > matches.txt; then
+    echo "Please update the following files to Copyright (c) 2010-2022:"
    cat matches.txt
    copyright=false
  fi
@@ -64,18 +63,6 @@ if [[ "${option}" == "--release" || "${option}" == "" ]]; then
  fi
 fi

-# math in doxygen check
-math=true
-if [[ "${option}" == "--math" || "${option}" == "" ]]; then
-  if grep '\\f' -R doc/CodeDocumentation.dox mfem.hpp config general linalg mesh fem examples miniapps | grep -v '\\frac' | grep -v fem/picojson.h | grep -v config/githooks/pre-push > matches.txt
-  then
-    echo "Please use $..$ and \$\$..\$\$ for LaTeX formulas in the following"
-    echo "comments instead of the Doxygen style \f$..\f$, \f[..\f], etc."
-    cat matches.txt
-    math=false
-  fi
-fi
-
 # wrap-up
 code=0
 if ! $copyright ; then
@@ -90,10 +77,6 @@ if ! $release ; then
  echo "release check failed, unroll log for details"
  code=1
 fi
-if ! $math ; then
-  echo "math in doxygen check failed, unroll log for details"
-  code=1
-fi

 # `code-style` is not just a check, it will actually reformat the code if
 # necessary. This means that if one pushes while the repo is in dirty state
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -38,14 +38,14 @@ all: header config-mk
 MPI = $(MFEM_USE_MPI:NO=)
 GHV_CXX ?= $(MFEM_CXX)
 GHV = get_hypre_version
-GHV_FLAGS = $(MFEM_CXXFLAGS) $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(HYPRE_OPT))
+GHV_FLAGS = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(HYPRE_OPT))
 SMX = $(if $(MFEM_USE_PUMI:NO=),MFEM_USE_SIMMETRIX)
 SMX_PATH = $(PUMI_DIR)/include/gmi_sim.h
 SMX_FILE = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(SMX_PATH))
 MUMPS = $(MFEM_USE_MUMPS:NO=)
 GMV_CXX ?= $(MFEM_CXX)
 GMV = get_mumps_version
-GMV_FLAGS = $(MFEM_CXXFLAGS) $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(MUMPS_OPT))
+GMV_FLAGS = $(subst @MFEM_DIR@,$(if $(MFEM_DIR),$(MFEM_DIR),..),$(MUMPS_OPT))

 $(GHV): $(SRC)$(GHV).cpp
 	$(call mfem-info, Determining HYPRE version ...)
@@ -110,4 +110,3 @@ config-mk:

 clean:
 	rm -f $(CONFIG_HPP) $(CONFIG_MK) sample-runs-build.log
-	rm -f $(GHV) $(GHV).out $(GMV) $(GMV).out *.dSYM
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -138,7 +138,7 @@ groups_parallel=(
 '"meshing"
   "Meshing miniapps:"
   "miniapps/meshing"
-   "pmesh-optimizer.cpp pmesh-fitting.cpp pminimal-surface.cpp"'
+   "pmesh-optimizer.cpp pminimal-surface.cpp"'
 '"electromagnetics"
   "Electromagnetics miniapps:"
   "miniapps/electromagnetics"
@@ -227,7 +227,7 @@ groups_all=(
   "Meshing miniapps:"
   "miniapps/meshing"
   "mobius-strip.cpp klein-bottle.cpp extruder.cpp toroid.cpp
-    {,p}mesh-optimizer.cpp pmesh-fitting.cpp {,p}minimal-surface.cpp"'
+    {,p}mesh-optimizer.cpp {,p}minimal-surface.cpp"'
 '"electromagnetics"
   "Electromagnetics miniapps:"
   "miniapps/electromagnetics"
@@ -315,7 +315,7 @@ function extract_sample_runs()
   sruns=`grep -v "^//.*  mpirun .* ${app}" "${src}" |
          grep "^//.*  ${app}" |
          sed -e "s/.*  ${app}/${vg_app}/g"`
-   runs="${sruns}"$'\n'"${pruns}"
+   runs="${sruns}${pruns}"
   if [ "$skip_gen_meshes" == "yes" ]; then
      runs=`printf "%s" "$runs" | grep -v ".* -m .*\.gen"`
   fi
@@ -554,14 +554,15 @@ function go()
   local cmd_line="${1##+( )}"
   cmd_line="${cmd_line%%+( )}"
   shopt -u extglob
+   eval local cmd=(${cmd_line})
   local res=""
   echo $sep
   echo "<${group}>" "${cmd_line}"
   echo $sep
   if [ "${timing}" == "yes" ]; then
-      timed_run eval "${cmd_line}"
+      timed_run "${cmd[@]}"
   else
-      eval "${cmd_line}"
+      "${cmd[@]}"
   fi
   if [ "$?" -eq 0 ]; then
      res="${green}  OK  ${none}"
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2024, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -3,5 +3,5 @@
  "version-string": "5.1.0",
  "port-version": 0,
  "description": "Serial Graph Partitioning and Fill-reducing Matrix Ordering",
-  "homepage": "http://glaros.dtc.umn.edu/gkhome/metis/metis/overview"
+  "homepage": "https://glaros.dtc.umn.edu/gkhome/metis/metis/overview"
 }
@@ -1,7 +1,7 @@
 MFEM NURBS mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # SEGMENT     = 1
 # SQUARE      = 3
@@ -1,7 +1,7 @@
 MFEM NURBS mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # SEGMENT     = 1
 # SQUARE      = 3
@@ -1,7 +1,7 @@
 MFEM mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # POINT       = 0
 # SEGMENT     = 1
@@ -1,95 +0,0 @@
-MFEM NURBS mesh v1.1
-
-#
-# MFEM Geometry Types (see mesh/geom.hpp):
-#
-# SEGMENT     = 1
-# SQUARE      = 3
-# CUBE        = 5
-#
-
-dimension
-2
-
-elements
-2
-1 3 0 1 4 5
-2 3 1 2 3 4
-
-boundary
-6
-3 1 0 1
-3 1 4 5
-3 1 1 2
-3 1 3 4
-1 1 5 0
-2 1 2 3
-
-edges
-7
-0 0 1
-0 5 4
-1 1 2
-1 4 3
-2 0 5
-2 1 4
-2 2 3
-
-vertices
-6
-
-knotvectors
-3
-1 5 0 0 1 2 3 4 4
-1 5 0 0 1 2 3 4 4
-1 2 0 0 1 1
-
-spacing
-3
-0 5 3 1 4 0 0 10.0
-1 4 3 2 4 0 1 0.15 0.15
-2 2 3 1 1 0 1 0.4
-
-weights
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-1
-
-FiniteElementSpace
-FiniteElementCollection: NURBS1
-VDim: 2
-Ordering: 1
-
-0 0
-4 0
-8 0
-8 1
-4 1
-0 1
-1 0
-2 0
-3 0
-3 1
-2 1
-1 1
-5 0
-6 0
-7 0
-7 1
-6 1
-5 1
@@ -1,7 +1,7 @@
 MFEM NURBS mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # SEGMENT     = 1
 # SQUARE      = 3
@@ -1,7 +1,7 @@
 MFEM mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # POINT       = 0
 # SEGMENT     = 1
@@ -1,7 +1,7 @@
 MFEM mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # POINT       = 0
 # SEGMENT     = 1
@@ -1,7 +1,7 @@
 MFEM mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # POINT       = 0
 # SEGMENT     = 1
@@ -1,7 +1,7 @@
 MFEM mesh v1.0

 #
-# MFEM Geometry Types (see fem/geom.hpp):
+# MFEM Geometry Types (see mesh/geom.hpp):
 #
 # POINT       = 0
 # SEGMENT     = 1
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Veselin Dobrev	86b3a2e3b4	Try the 'lgtm' CodeQL queries	2022-08-25 15:25:59 -07:00
Veselin Dobrev	3acdce1cb5	Try the 'security-and-quality' CodeQL queries	2022-08-25 12:30:23 -07:00
Veselin Dobrev	21e6939562	Try the 'security-extended' CodeQL queries	2022-08-25 10:13:22 -07:00
Veselin Dobrev	d14f14323c	Remove unused variable in linalg/ode.cpp	2022-08-24 17:11:03 -07:00
Veselin Dobrev	b58c3f956d	Remove testing of bad printf from linalg/ode.cpp	2022-08-24 17:07:14 -07:00
Will Pazner	76ab9919d8	[Don't merge] add wrong printf format to trigger CodeQL	2022-08-23 13:18:50 -07:00
Will Pazner	3f625c9efa	[Don't merge] Add memory leak to try to trigger CodeQL	2022-08-23 12:34:30 -07:00