fixed comment

finished draft of interfaces and added "usage" examples
sketch of the interfaces needed for contact solvers
2022-12-29 10:51:12 -08:00 · 2022-12-29 10:43:33 -08:00 · 2022-12-28 15:20:22 -08:00
1345 changed files with 57977 additions and 224169 deletions
@@ -31,7 +31,7 @@ install:
 - ps: ( get-content "GKlib\gk_arch.h") | % { If ($_.ReadCount -ge 52) {$_ -replace "#ifdef __MSC__","#ifdef DISABLE_THIS_ANCIENT_MSC_CHECK"} Else {$_} } | set-content "GKlib\gk_arch.h"
 - cmake -H. -Bbuild
 # -DCMAKE_BUILD_TYPE=Release
- cmake --build build --target metis -j 4
+- cmake --build build
 - set METIS_PATH=%cd%
 - cd ..

@@ -40,7 +40,7 @@ install:
 - 7z x v2.19.0.tar.gz -so | 7z x -si -ttar > nul
 - cd hypre-2.19.0/src
 - cmake -H. -Bbuild
- cmake --build build -j 4
+- cmake --build build
 - cmake --build build --target install
 - cd ../..

@@ -49,20 +49,14 @@ install:

 # MFEM
 before_build:
- cmake . -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DHYPRE_DIR=%cd%\..\hypre-2.19.0\src\hypre -DMETIS_LIBRARIES=%METIS_PATH%\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%METIS_PATH%\include
-# - cmake . -Bbuild_serial -DMFEM_USE_MPI=FALSE
- cmake . -Bbuild_shared_serial -DMFEM_USE_MPI=FALSE -DBUILD_SHARED_LIBS=ON
+- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_parallel -DMFEM_USE_MPI=TRUE -DMFEM_USE_METIS_5=TRUE -DHYPRE_DIR=%cd%\..\hypre-2.19.0\src\hypre -DMETIS_LIBRARIES=%METIS_PATH%\build\libmetis\Debug\metis.lib -DMETIS_INCLUDE_DIRS=%METIS_PATH%\include
+- cmake -H. -DCMAKE_INSTALL_PREFIX=install -Bbuild_serial -DMFEM_USE_MPI=FALSE

 build_script:
- cmake --build build_parallel --config Debug -j 4
-# - cmake --build build_serial --config Release -j 4
-# - cmake --build build_serial --target exec --config Release -j 4
- cmake --build build_shared_serial --config Release -j 4
- cmake --build build_shared_serial --target exec --config Release -j 4
+- cmake --build build_parallel --config Release -j 4
+- cmake --build build_serial --config Release -j 4
+- cmake --build build_serial --target exec --config Release -j 4

 after_build:
-# - cd build_serial
-# - ctest -C Release --output-on-failure
-# - cd ..
- cd build_shared_serial
+- cd build_serial
 - ctest -C Release --output-on-failure
@@ -12,7 +12,7 @@ coverage:
        threshold: 0%
        base: auto
        branches:
-          - main
+          - master
        if_ci_failed: error
        informational: true
        only_pulls: true
@@ -22,7 +22,7 @@ coverage:
        threshold: 1%  # allows variations around the target
        base: auto
        branches:
-          - main
+          - master
        if_ci_failed: error
        only_pulls: true

@@ -1,154 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: Sanitizer Config
-description: Sets up environment variables for MFEM sanitizer workflow
-
-inputs:
-  DEBUG:
-    description: If true, use intermediate caches to speed up the workflow
-                 by reusing previous builds.
-    default: false
-
-  REPOSITORY:
-    description: Repository to checkout
-    default: mfem/mfem
-
-  BRANCH:
-    description: Branch to checkout
-    default: ubsan
-
-  CLANG_VER:
-    description: CLANG version to use
-    default: 18
-
-  # https://github.com/llvm/llvm-project/releases
-  LLVM_VER:
-    description: LLVM version to use
-    default: 19.1.7
-
-  # https://github.com/hypre-space/hypre/releases
-  HYPRE_VER:
-    description: HYPRE version to use
-    default: 2.19.0
-
-  METIS_VER:
-    description: METIS version to use
-    default: 4.0.3
-
-  CTEST:
-    description: CTest command to use
-    default: ctest -j --test-load $(nproc)
-                      --schedule-random
-                      --stop-on-failure --output-on-failure
-                      --test-dir
-
-  # https://clang.llvm.org/docs/AddressSanitizer.html
-  ASAN_OPTIONS:
-    default: detect_leaks=1,
-             strict_init_order=1,
-             strict_string_checks=1,
-             check_initialization_order=1,
-             detect_stack_use_after_return=1
-  ASAN_CXXFLAGS:
-    default: -fsanitize=address
-             -fsanitize-address-use-after-scope
-  ASAN_LDFLAGS:
-    default: -fsanitize=address
-
-  # https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html
-  UBSAN_OPTIONS:
-    default: halt_on_error=1, print_stacktrace=1
-  UBSAN_CXXFLAGS:
-    default: -fsanitize=undefined
-  UBSAN_LDFLAGS:
-    default: -fsanitize=undefined
-
-  # https://clang.llvm.org/docs/MemorySanitizer.html
-  MSAN_OPTIONS:
-    default: "poison_in_dtor=1"
-  MSAN_CXXFLAGS:
-    default: -fsanitize=memory
-             -fsanitize-memory-track-origins
-             -fsanitize-memory-use-after-dtor
-  MSAN_LDFLAGS:
-    default: -fsanitize=memory
-
-  LSAN_DIR:
-    description: LSAN suppression directory
-    default: lsan
-
-  LSAN_FILE:
-    description: LSAN suppression file
-    default: lsan.supp
-
-  NO_FLAGS:
-    description: If true, do not set any CXXFLAGS or LDFLAGS.
-    default: false
-
-runs:
-  using: 'composite'
-  steps:
-    - name: Env (Inputs)
-      run: |
-        echo DEBUG=${{inputs.DEBUG}} >> $GITHUB_ENV
-        echo REPOSITORY=${{inputs.REPOSITORY}} >> $GITHUB_ENV
-        echo BRANCH=${{inputs.BRANCH}} >> $GITHUB_ENV
-        echo CLANG_VER=${{inputs.CLANG_VER}} >> $GITHUB_ENV
-        echo LLVM_VER=${{inputs.LLVM_VER}} >> $GITHUB_ENV
-        echo HYPRE_VER=${{inputs.HYPRE_VER}} >> $GITHUB_ENV
-        echo METIS_VER=${{inputs.METIS_VER}} >> $GITHUB_ENV
-        echo CTEST=${{inputs.CTEST}} >> $GITHUB_ENV
-        echo ASAN_OPTIONS=${{inputs.ASAN_OPTIONS}} >> $GITHUB_ENV
-        echo UBSAN_OPTIONS=${{inputs.UBSAN_OPTIONS}} >> $GITHUB_ENV
-        echo MSAN_OPTIONS=${{inputs.MSAN_OPTIONS}} >> $GITHUB_ENV
-        echo LSAN_DIR=${{inputs.LSAN_DIR}} >> $GITHUB_ENV
-        echo LSAN_FILE=${{inputs.LSAN_FILE}} >> $GITHUB_ENV
-        echo ASAN_CXXFLAGS=${{inputs.ASAN_CXXFLAGS}} >> $GITHUB_ENV
-        echo ASAN_LDFLAGS=${{inputs.ASAN_LDFLAGS}} >> $GITHUB_ENV
-        echo UBSAN_CXXFLAGS=${{inputs.UBSAN_CXXFLAGS}} >> $GITHUB_ENV
-        echo UBSAN_LDFLAGS=${{inputs.UBSAN_LDFLAGS}} >> $GITHUB_ENV
-        echo MSAN_CXXFLAGS=${{inputs.MSAN_CXXFLAGS}} >> $GITHUB_ENV
-        echo MSAN_LDFLAGS=${{inputs.MSAN_LDFLAGS}} >> $GITHUB_ENV
-      shell: bash
-
-    - name: Env (dir)
-      run: |
-        echo LLVM_DIR=${{github.workspace}}/llvm >> $GITHUB_ENV
-        echo HYPRE_DIR=hypre-${{inputs.HYPRE_VER}} >> $GITHUB_ENV
-        echo METIS_DIR=metis-${{inputs.METIS_VER}} >> $GITHUB_ENV
-      shell: bash
-
-    - name: Env (bis)
-      run: |
-        echo CC=clang-${{inputs.CLANG_VER}} >> $GITHUB_ENV
-        echo CXX=clang++-${{inputs.CLANG_VER}} >> $GITHUB_ENV
-        echo LLVM_INC=${{env.LLVM_DIR}}/include/c++/v1 >> $GITHUB_ENV
-        echo LLVM_LIB=${{env.LLVM_DIR}}/lib >> $GITHUB_ENV
-        echo HYPRE_TGZ=v${{inputs.HYPRE_VER}}.tar.gz >> $GITHUB_ENV
-        echo METIS_TGZ=metis-${{inputs.METIS_VER}}.tar.gz >> $GITHUB_ENV
-        LSAN_SUPPRESSIONS="${{github.workspace}}/${{inputs.LSAN_DIR}}/${{inputs.LSAN_FILE}}"
-        echo "LSAN_OPTIONS=suppressions=$LSAN_SUPPRESSIONS" >> $GITHUB_ENV
-      shell: bash
-
-    - name: Env (ter)
-      if: ${{ inputs.NO_FLAGS != 'true' }}
-      run: |
-        echo LLVM_CXXFLAGS=-stdlib=libc++ -I${{env.LLVM_INC}} -Isystem${{env.LLVM_INC}} >> $GITHUB_ENV
-        echo LLVM_LDFLAGS=-L${{env.LLVM_LIB}} -lc++abi -Wl,-rpath,${{env.LLVM_LIB}} >> $GITHUB_ENV
-      shell: bash
-
-    - name: Env (quater)
-      if: ${{ inputs.NO_FLAGS != 'true' }}
-      run: |
-        echo CXXFLAGS=${{env.LLVM_CXXFLAGS}} >> $GITHUB_ENV
-        echo LDFLAGS=${{env.LLVM_LDFLAGS}} >> $GITHUB_ENV
-      shell: bash
@@ -1,91 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: 'MFEM Compilation'
-description: 'MFEM Compilation'
-
-inputs:
-  par:
-    description: 'Whether to build for parallel (true/false)'
-    default: false
-  sanitizer:
-    description: 'Sanitizer to use (asan, msan, ubsan)'
-    default: asan
-
-runs:
-  using: 'composite'
-  steps:
-    - uses: ./.github/actions/sanitize/config
-
-    - uses: actions/cache@v4
-      if: ${{env.DEBUG == 'true'}}
-      id: debug
-      with:
-        path: mfem/build
-        key: build-${{inputs.par}}-${{inputs.sanitizer}}
-
-    - uses: ./.github/actions/sanitize/setup
-      if: ${{steps.debug.outputs.cache-hit != 'true'}}
-      with:
-        par: ${{inputs.par}}
-        sanitizer: ${{inputs.sanitizer}}
-
-    - name: Build with ASAN
-      if: inputs.sanitizer == 'asan'
-      run: echo CXXFLAGS=${{env.CXXFLAGS}} ${{env.ASAN_CXXFLAGS}} >> $GITHUB_ENV
-      shell: bash
-
-    - name: Build with MSAN
-      if: inputs.sanitizer == 'msan'
-      run: echo CXXFLAGS=${{env.CXXFLAGS}} ${{env.MSAN_CXXFLAGS}} >> $GITHUB_ENV
-      shell: bash
-
-    - name: Build with UBSAN
-      if: inputs.sanitizer == 'ubsan'
-      run: echo CXXFLAGS=${{env.CXXFLAGS}} ${{env.UBSAN_CXXFLAGS}} >> $GITHUB_ENV
-      shell: bash
-
-    - uses: mfem/github-actions/build-mfem@v2.5
-      if: ${{steps.debug.outputs.cache-hit != 'true'}}
-      env:
-        CXXFLAGS: ${{env.CXXFLAGS}}
-        LDFLAGS: ${{env.LDFLAGS}}
-      with:
-        mpi: ${{inputs.par == 'false' && 'seq' || 'par'}}
-        mfem-dir: mfem
-        os: ${{runner.os}}
-        library-only: true
-        build-system: cmake
-        hypre-dir: ${{env.HYPRE_DIR}}
-        metis-dir: ${{env.METIS_DIR}}
-        config-options: >-
-          -GNinja
-          -DMPICXX=${{env.CXX}}
-          -DCMAKE_CXX_STANDARD=17
-          -DMFEM_USE_MEMALLOC=OFF
-          -DCMAKE_BUILD_TYPE=Release
-          -DCMAKE_VERBOSE_MAKEFILE=ON
-          -DCMAKE_CXX_COMPILER=${{env.CXX}}
-          -DCMAKE_CXX_FLAGS_RELEASE='-g -O1 -fno-omit-frame-pointer'
-
-    - name: Delete object files
-      if: ${{steps.debug.outputs.cache-hit != 'true'}}
-      working-directory: mfem/build
-      run: find . -type f -name '*.o' -delete
-      shell: bash
-
-    - uses: actions/upload-artifact@v4
-      with:
-        name: build-${{inputs.par}}-${{inputs.sanitizer}}
-        path: mfem/build
-        if-no-files-found: error
-        retention-days: 1
-        overwrite: false
@@ -1,33 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: 'Install MPI'
-description: 'Installs MPI and set up its environment variables'
-
-runs:
-  using: 'composite'
-  steps:
-    - name: Install
-      run: sudo apt-get install openmpi-bin libopenmpi-dev
-      shell: bash
-
-    - name: Env
-      run: |
-        echo PRTE_MCA_rmaps_default_mapping_policy=:oversubscribe >> $GITHUB_ENV
-        echo MPI_INC=$(mpicxx --showme:compile) >> $GITHUB_ENV
-        echo MPI_LIB=$(mpicxx --showme:link) >> $GITHUB_ENV
-      shell: bash
-
-    - name: Env (bis)
-      run: |
-        echo CXXFLAGS=${{env.CXXFLAGS}} ${{env.MPI_INC}} >> $GITHUB_ENV
-        echo LDFLAGS=${{env.LDFLAGS}} ${{env.MPI_LIB}} >> $GITHUB_ENV
-      shell: bash
@@ -1,71 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: 'Restore state'
-description: 'Restore state to be able to run checks, tests'
-
-inputs:
-  par:
-    description: 'Whether to build for parallel (true/false)'
-    default: false
-  sanitizer:
-    description: 'Sanitizer to use (asan, msan, ubsan)'
-    default: asan
-  cache-path:
-    description: 'path to what needs to be restored'
-    default: none
-  cache-skip:
-    description: 'Skip cache restoration'
-    default: false
-
-outputs:
-  cache-hit:
-    description: 'Output from a specific step'
-    value: ${{steps.debug.outputs.cache-hit}}
-
-runs:
-  using: 'composite'
-  steps:
-    - uses: ./.github/actions/sanitize/config
-
-    - uses: actions/cache@v4
-      if: ${{env.DEBUG == 'true' && inputs.cache-skip != 'true'}}
-      id: debug
-      with:
-        path: ${{inputs.cache-path}}
-        key: ${{github.job}}-${{inputs.par}}-${{inputs.sanitizer}}
-
-    - uses: ./.github/actions/sanitize/setup
-      if: ${{steps.debug.outputs.cache-hit != 'true'}}
-      with:
-        par: ${{inputs.par}}
-        sanitizer: ${{inputs.sanitizer}}
-
-    - uses: actions/download-artifact@v4
-      with:
-        name: build-${{inputs.par}}-${{inputs.sanitizer}}
-        path: mfem/build
-
-    - name: Ninja Patch
-      working-directory: mfem/build
-      run: |
-        sed -i -e 's/CXX_STATIC_LIBRARY_LINKER__mfem_Release.*/CUSTOM_COMMAND/' build.ninja
-        sed -i -e '/build tests\/unit\/all:/ s/tests\/unit\/[^ ]*unit_tests[^ ]*//g' build.ninja
-        sed -i -e '/^add_test(\[=\[\(unit_tests\|punit_tests\)\]=\]/ s/)/ "--input-file .\/list-test-names-${{matrix.tag}}" "--min-duration 1")/' tests/unit/CTestTestfile.cmake
-      shell: bash
-
-    - name: Copy Data
-      if: ${{steps.debug.outputs.cache-hit != 'true'}}
-      working-directory: mfem/build
-      run: |
-        ninja cmake_object_order_depends_target_unit_tests
-        cp -pR ../tests/unit/data tests/unit
-      shell: bash
@@ -1,64 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: 'Setup state'
-description: 'Sets up the state to be able to run build & run'
-
-inputs:
-  par:
-    description: 'Whether to build for parallel (true/false)'
-    default: false
-  sanitizer:
-    description: 'Sanitizer to use (asan, msan, ubsan)'
-    default: asan
-
-runs:
-  using: 'composite'
-  steps:
-    - uses: actions/cache/restore@v4  # Cache for LLVM libcxx
-      with:
-        path: ${{env.LLVM_DIR}}
-        fail-on-cache-miss: true
-        key: build-libcxx-${{env.LLVM_VER}}-${{inputs.sanitizer}}
-
-    - uses: ./.github/actions/sanitize/mpi
-      if: ${{inputs.par == 'true'}}
-
-    - uses: actions/cache/restore@v4  # Cache for Hypre
-      if: ${{inputs.par == 'true'}}
-      with:
-        path: ${{env.HYPRE_DIR}}
-        fail-on-cache-miss: true
-        key: ${{runner.os}}-ompi-build-${{env.HYPRE_DIR}}-int32-fp64-v2.5
-
-    - uses: actions/cache/restore@v4  # Cache for Metis
-      if: ${{inputs.par == 'true'}}
-      with:
-        path: ${{env.METIS_DIR}}
-        fail-on-cache-miss: true
-        key: ${{runner.os}}-build-${{env.METIS_DIR}}-v2.5
-
-    - name: Hypre/Metis links
-      if: ${{inputs.par == 'true'}}
-      run: ln -s -f ${{env.HYPRE_DIR}} hypre && ln -s -f ${{env.METIS_DIR}} metis-4.0
-      shell: bash
-
-    - uses: actions/cache/restore@v4  # Cache for LSAN suppression file
-      with:
-        path: ${{env.LSAN_DIR}}
-        fail-on-cache-miss: true
-        key: build-lsan-suppression-file
-
-    - uses: actions/checkout@v4  # Checkout the repository
-      with:
-        path: mfem
-        # ref: ${{env.BRANCH}}
-        # repository: ${{env.REPOSITORY}}
@@ -0,0 +1,61 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# Number of days of inactivity before an Issue or Pull Request becomes stale
+daysUntilStale: 30
+
+# Number of days of inactivity before an Issue or Pull Request with the stale
+# label is closed.  Set to false to disable. If disabled, issues still need to
+# be closed manually, but will remain marked as stale.
+daysUntilClose: 7
+
+# Only issues or pull requests with all of these labels are check if stale.
+# Defaults to `[]` (disabled)
+onlyLabels: []
+
+# Issues or Pull Requests with these labels will never be considered stale. Set
+# to `[]` to disable
+exemptLabels:
+  - bug
+  - WIP
+  - ready-for-review
+  - in-review
+  - in-next
+
+# Set to true to ignore issues in a project (defaults to false)
+exemptProjects: false
+
+# Set to true to ignore issues in a milestone (defaults to false)
+exemptMilestones: false
+
+# Set to true to ignore issues with an assignee (defaults to false)
+exemptAssignees: false
+
+# Label to use when marking an issue as stale
+staleLabel: stale
+
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  :warning: This issue or PR has been automatically marked as stale because it has not
+  had any activity in the last month. *If no activity occurs in the next week, it will
+  be automatically closed.* Thank you for your contributions.
+
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false
+
+# Limit the number of actions per hour, from 1-30. Default is 30
+limitPerRun: 30
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
+# pulls:
+#   daysUntilStale: 30
+#   markComment: >
+#     This pull request has been automatically marked as stale because it has not had
+#     recent activity. It will be closed if no further activity occurs. Thank you
+#     for your contributions.
+
+# issues:
+#   exemptLabels:
+#     - confirmed
@@ -7,17 +7,18 @@

                               https://mfem.org

+
 This directory contains the GitHub CI scripts for MFEM.

 Note that some of these scripts use the shared MFEM GitHub Actions from the external mfem/github-actions repository:

-  <https://github.com/mfem/github-actions>
+  https://github.com/mfem/github-actions

-For a particular action, e.g. `mfem/github-actions/build-mfem@v2.5`, the `v2.5` suffix denotes the branch in the above from which the action is taken.
+For a particular action, e.g. `mfem/github-actions/build-mfem@v2.1`, the `v2.1` suffix denotes the branch in the above from which the action is taken.

 The current CI workflows are:

-## `repo-check.yml`
+### `repo-check.yml`

 Runs a number of static repository-level sanity checks.

@@ -29,39 +30,19 @@ Runs a number of static repository-level sanity checks.

 - `branch-history` guards against accidental commits of large files using the `--history` option of the `config/githooks/pre-push` script.

-## `mfem-analysis.yml` (`build-analysis`)
+### `mfem-analysis.yml` (`build-analysis`)

 Checks if the code builds and satisfies minimal requirements.

 - `gitignore` builds hypre, METIS, and MFEM using `mfem/github-actions/build-hypre`, `mfem/github-actions/build-metis`, and `mfem/github-actions/build-mfem` and checks for correct `.gitignore` settings by running the `tests/scripts/gitignore` script.

-## `builds-and-tests.yml`
+### `builds-and-tests.yml`

 Runs a matrix of builds and tests runs with different compilers, OS, mfem/hypre settings, etc. Also processes and upload Codecov reports.

-Uses the following GitHub Actions from <https://github.com/mfem/github-actions>:
+Uses the following GitHub Actions from https://github.com/mfem/github-actions:

 - `mfem/github-actions/build-hypre`
 - `mfem/github-actions/build-metis`
 - `mfem/github-actions/build-mfem`
 - `mfem/github-actions/upload-coverage`
-
-## Sanitizer Workflow for MFEM Verification
-
-This workflow validates MFEM unit tests, examples, and miniapps using sanitizer tools.
-
- `sanitizers.yml` orchestrates:
-  - Building and caching dependencies: HYPRE, METIS, LSAN suppression file, and LLVM libcxx.
-  - Launching fine-grained jobs for serial (ASAN, MSAN, UBSAN) and parallel (ASAN, UBSAN) sanitizers.
- `sanitize-tests.yml` is a reusable workflow accepting `par` mode (`true` for parallel) and `sanitizer` (ASAN, MSAN, or UBSAN) as inputs. It executes the following jobs:
-  - **Build**: Compiles the MFEM library with specified parallel and sanitizer settings.
-  - **Check**: Runs verification checks.
-  - Parallel jobs to test the following: **Examples**, **Miniapps** and **Unit tests**
-
-The workflow leverages composite actions in `.github/actions/sanitize/`:
-
- `config`: Centralizes settings for the sanitizer workflow.
- `mfem`: Manages the MFEM library build process.
- `mpi`: Installs MPI and applies additional compilation flags.
- `restore`: Restores the testing environment state.
- `setup`: Builds or restores cached dependencies.
@@ -1,6 +1,7 @@
 name: "Docker"

 on:
+
  # Always have a base image ready to go - this is a nightly build
  schedule:
    - cron: 0 3 * * *
@@ -25,6 +26,7 @@ jobs:
    strategy:
      fail-fast: false
      matrix:
+
        # Dockerfiles to build, a matrix supports future expanded builds
        container: [["config/docker/Dockerfile.base", "ghcr.io/mfem/mfem-ubuntu-base"],
                    ["config/docker/Dockerfile", "ghcr.io/mfem/mfem-ubuntu"]]
@@ -32,20 +34,15 @@ jobs:
    runs-on: ubuntu-latest
    name: Build
    steps:
-      - name: Run Actions Cleaner
-        uses: easimon/maximize-build-space@v8
-        with:
-          overprovision-lvm: 'true'
-          remove-dotnet: 'true'
-          remove-android: 'true'
-          remove-haskell: 'true'
-          remove-codeql: 'true'
-          remove-docker-images: 'true'
-
      - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3

-      # It's easier to reference named variables than indexes of the matrix
+      - name: Make Space For Build
+        run: |
+          sudo rm -rf /usr/share/dotnet
+          sudo rm -rf /opt/ghc
+
+       # It's easier to reference named variables than indexes of the matrix
      - name: Set Environment
        env:
          dockerfile: ${{ matrix.container[0] }}
@@ -65,7 +62,7 @@ jobs:

      - name: GHCR Login
        if: (github.event_name != 'pull_request')
-        uses: docker/login-action@v3
+        uses: docker/login-action@v2
        with:
          registry: ghcr.io
          username: ${{ github.actor }}
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -29,15 +29,10 @@ on:
  pull_request:
  workflow_dispatch:

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 env:
  HYPRE_ARCHIVE: v2.19.0.tar.gz
  HYPRE_TOP_DIR: hypre-2.19.0
  METIS_ARCHIVE: metis-4.0.3.tar.gz
-  METIS_ARCHIVE_MAC: metis-4.0.3-mac.tgz
  METIS_TOP_DIR: metis-4.0.3
  MFEM_TOP_DIR: mfem

@@ -57,8 +52,6 @@ jobs:
        mpi: [seq, par]
        build-system: [make, cmake]
        hypre-target: [int32]
-        precision: [fp64]
-        enzyme: [false]
        exclude:
          - os: ubuntu-latest
            build-system: cmake
@@ -72,310 +65,205 @@ jobs:
        # - Add a new combination.
        #   'build-system: cmake' and 'hypre-target: int64'
        #
-        # Note: we will gather coverage info for any non-debug run except the
+        # note: we will gather coverage info for any non-debug run except the
        # CMake build.
        include:
          - target: dbg
            codecov: NO
          - target: opt
            codecov: YES
-          - os: ubuntu-latest
-            target: dbg
-            config-opts: "CPPFLAGS+=-Og"
-          - os: macos-latest
-            codecov: NO
          - os: windows-latest
            codecov: NO
-            # config-opts: '-G "Ninja Multi-Config"'
-          - os: windows-latest
-            target: opt
-            mpi: par
-            config-opts: "-DBUILD_SHARED_LIBS=ON"
-            # config-opts: '-DBUILD_SHARED_LIBS=ON -G "Ninja Multi-Config"'
          - os: ubuntu-latest
            target: opt
            codecov: NO
            mpi: par
            build-system: cmake
            hypre-target: int32
-            precision: fp64
-            config-opts: "-DCMAKE_INSTALL_PREFIX=../cmake-install"
-            # This option can be set to pass additional configuration options to
-            # the MFEM configuration command.
-            # config-opts: '-DCMAKE_VERBOSE_MAKEFILE=ON'
          - os: ubuntu-latest
            target: opt
            codecov: NO
            mpi: par
            build-system: make
            hypre-target: int64
-            precision: fp64
-          - os: ubuntu-latest
-            target: opt
-            codecov: NO
-            mpi: par
-            build-system: make
-            hypre-target: int32
-            precision: fp32
-          - os: macos-latest
-            target: opt
-            codecov: NO
-            mpi: par
-            build-system: make
-            hypre-target: int32
-            precision: fp32
-          - os: macos-latest
-            target: opt
-            codecov: NO
-            mpi: par
-            build-system: make
-            hypre-target: int32
-            precision: fp64
-            enzyme: true
-            config-opts: MFEM_USE_ENZYME=YES ENZYME_DIR=$(brew --prefix enzyme) LDFLAGS=-L$LLVM_PREFIX/lib/c++
-
-    name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}-${{ matrix.precision }}${{ matrix.enzyme && '-enzyme' || '' }}
+    name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}

    runs-on: ${{ matrix.os }}

-    continue-on-error: ${{ matrix.enzyme && true || false }}
-
    steps:
-      # Fix 'No space left on device' errors for Ubuntu builds.
-      - name: Run Actions Cleaner
-        if: matrix.os == 'ubuntu-latest'
-        uses: easimon/maximize-build-space@v8
-        with:
-          overprovision-lvm: "true"
-          remove-android: "true"
+    # This external action allows to interrupt a workflow already running on
+    # the same branch to save resource
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.11.0
+      with:
+        access_token: ${{ github.token }}

-      # Checkout MFEM in "mfem" subdirectory. Final path:
-      # /home/runner/work/mfem/mfem/mfem
-      # Note: Done now to access "install-hypre" and "install-metis" actions.
-      - name: checkout mfem
-        uses: actions/checkout@v4
-        with:
-          path: ${{ env.MFEM_TOP_DIR }}
-          # Fetch the complete history for codecov to access commits ID
-          fetch-depth: 0
+    # Checkout MFEM in "mfem" subdirectory. Final path:
+    # /home/runner/work/mfem/mfem/mfem
+    # Note: Done now to access "install-hypre" and "install-metis" actions.
+    - name: checkout mfem
+      uses: actions/checkout@v3
+      with:
+        path: ${{ env.MFEM_TOP_DIR }}
+        # Fetch the complete history for codecov to access commits ID
+        fetch-depth: 0

-      - name: Windows environment - PowerShell [debug]
-        if: matrix.os == 'windows-latest'
-        run: |
-          ls env: | fl
+    # Only get MPI if defined for the job.
+    # TODO: It would be nice to have only one step, e.g. with a dedicated
+    # action, but I (@adrienbernede) don't see how at the moment.
+    - name: get MPI (Linux)
+      if: matrix.mpi == 'par' && matrix.os == 'ubuntu-latest'
+      run: |
+        sudo apt-get install mpich libmpich-dev

-      - name: Windows environment - Bash [debug]
-        if: matrix.os == 'windows-latest'
-        run: |
-          env
-        shell: bash
+    - name: get lcov (Linux)
+      if: matrix.codecov == 'YES' && matrix.os == 'ubuntu-latest'
+      run: |
+        sudo apt-get install lcov

-      # For info on Xcode see:
-      #  - https://github.com/actions/runner-images/issues/12541
-      #  - https://github.com/actions/runner-images/blob/releases/macos-15-arm64/20250811/images/macos/macos-15-arm64-Readme.md#xcode
-      - name: Xcode version setup (MacOS)
-        if: matrix.os == 'macos-latest'
-        run: |
-          XCODE_PATH="/Applications/Xcode_16.4.app"
-          echo "> sudo xcode-select -s ${XCODE_PATH}"
-          sudo xcode-select -s ${XCODE_PATH}
-          echo "> g++ -v"
-          g++ -v
-          echo "> clang++ -v"
-          clang++ -v
+    # Keep the following section in case we need it again in the future,
+    # see: https://github.com/mfem/mfem/pull/3385#discussion_r1058013032
+    # - name: Set up Homebrew
+    #   if: ( matrix.mpi == 'par' || matrix.codecov == 'YES' ) && matrix.os == 'macos-latest'
+    #   uses: Homebrew/actions/setup-homebrew@master

-      # Only get MPI if defined for the job.
-      # TODO: It would be nice to have only one step, e.g. with a dedicated
-      # action, but I (@adrienbernede) don't see how at the moment.
-      - name: get MPI (Linux)
-        if: matrix.mpi == 'par' && matrix.os == 'ubuntu-latest'
-        run: |
-          sudo apt-get install openmpi-bin libopenmpi-dev
-          export OMPI_MCA_rmaps_base_oversubscribe=1
+    - name: get MPI (MacOS)
+      if: matrix.mpi == 'par' && matrix.os == 'macos-latest'
+      run: |
+        export HOMEBREW_NO_INSTALL_CLEANUP=1
+        brew install openmpi

-      - name: get lcov (Linux)
-        if: matrix.codecov == 'YES' && matrix.os == 'ubuntu-latest'
-        run: |
-          sudo apt-get install lcov
+    - name: get lcov (MacOS)
+      if: matrix.codecov == 'YES' && matrix.os == 'macos-latest'
+      run: |
+        export HOMEBREW_NO_INSTALL_CLEANUP=1
+        brew install lcov

-      # Keep the following section in case we need it again in the future,
-      # see: https://github.com/mfem/mfem/pull/3385#discussion_r1058013032
-      # - name: Set up Homebrew
-      #   if: ( matrix.mpi == 'par' || matrix.codecov == 'YES' ) && matrix.os == 'macos-latest'
-      #   uses: Homebrew/actions/setup-homebrew@master
+    - name: get MPI (Windows)
+      if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
+      uses: mpi4py/setup-mpi@v1.1.2

-      - name: get MPI (MacOS)
-        if: matrix.mpi == 'par' && matrix.os == 'macos-latest'
-        run: |
-          export HOMEBREW_NO_INSTALL_CLEANUP=1
-          brew install openmpi
+    # Get Hypre through cache, or build it.
+    # Install will only run on cache miss.
+    - name: cache hypre
+      id: hypre-cache
+      if: matrix.mpi == 'par'
+      uses: actions/cache@v3
+      with:
+        path: ${{ env.HYPRE_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-${{ matrix.hypre-target }}-v2.2

-      - name: get lcov (MacOS)
-        if: matrix.codecov == 'YES' && matrix.os == 'macos-latest'
-        run: |
-          export HOMEBREW_NO_INSTALL_CLEANUP=1
-          brew install lcov
+    - name: get hypre
+      if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os != 'windows-latest'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: ${{ matrix.hypre-target }}
+        build-system: make

-      - name: get MPI (Windows)
-        if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
-        uses: mpi4py/setup-mpi@v1.1.4
+    - name: get hypre (Windows)
+      if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os == 'windows-latest'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: ${{ matrix.hypre-target }}
+        build-system: cmake

-      # Get Hypre through cache, or build it.
-      # Install will only run on cache miss.
-      - name: cache hypre
-        id: hypre-cache
-        if: matrix.mpi == 'par'
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.HYPRE_TOP_DIR }}
-          key: ${{ runner.os }}-ompi-build-${{ env.HYPRE_TOP_DIR }}-${{ matrix.hypre-target }}-${{ matrix.precision }}-v2.5
+    # Get Metis through cache, or build it.
+    # Install will only run on cache miss.
+    - name: cache metis
+      id: metis-cache
+      if: matrix.mpi == 'par' && matrix.os != 'windows-latest'
+      uses: actions/cache@v3
+      with:
+        path: ${{ env.METIS_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2

-      - name: get hypre
-        if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os != 'windows-latest'
-        uses: mfem/github-actions/build-hypre@v2.5
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: ${{ matrix.hypre-target }}
-          build-system: make
-          precision: ${{ matrix.precision }}
+    - name: install metis
+      if: matrix.mpi == 'par' && matrix.os != 'windows-latest' && steps.metis-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-metis@v2.2
+      with:
+        archive: ${{ env.METIS_ARCHIVE }}
+        dir: ${{ env.METIS_TOP_DIR }}

-      - name: get hypre (Windows)
-        if: matrix.mpi == 'par' && steps.hypre-cache.outputs.cache-hit != 'true' && matrix.os == 'windows-latest'
-        uses: mfem/github-actions/build-hypre@v2.5
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: ${{ matrix.hypre-target }}
-          build-system: cmake
-          precision: ${{ matrix.precision }}
+    - name: cache vcpkg (Windows)
+      id: vcpkg-cache
+      if: matrix.os == 'windows-latest'
+      uses: actions/cache@v3
+      with:
+        path: vcpkg_cache
+        key: ${{ runner.os }}-${{ matrix.mpi }}-vcpkg-v1

-      # Get Metis through cache, or build it.
-      # Install will only run on cache miss.
-      - name: cache metis
-        id: metis-cache
-        if: matrix.mpi == 'par' && matrix.os != 'windows-latest'
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.METIS_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.5
+    - name: prepare vcpkg binary cache location (Windows)
+      if: matrix.os == 'windows-latest' && steps.vcpkg-cache.outputs.cache-hit != 'true'
+      run: |
+        mkdir -p vcpkg_cache

-      - name: install metis
-        if: matrix.mpi == 'par' && matrix.os != 'windows-latest' && steps.metis-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-metis@v2.5
-        with:
-          archive: ${{ matrix.os != 'macos-latest' && env.METIS_ARCHIVE || env.METIS_ARCHIVE_MAC }}
-          dir: ${{ env.METIS_TOP_DIR }}
+    - name: install metis (Windows)
+      if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
+      env:
+        VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
+      run: |
+        vcpkg install metis-mfem --triplet=x64-windows-static --overlay-ports=${{ env.MFEM_TOP_DIR }}/config/vcpkg/ports

-      - name: cache vcpkg (Windows)
-        id: vcpkg-cache
-        if: matrix.os == 'windows-latest'
-        uses: actions/cache@v4
-        with:
-          path: vcpkg_cache
-          key: ${{ runner.os }}-${{ matrix.mpi }}-vcpkg-v1
+    # MFEM build and test
+    - name: build
+      uses: mfem/github-actions/build-mfem@v2.2
+      env:
+        VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
+      with:
+        os: ${{ matrix.os }}
+        target: ${{ matrix.target }}
+        codecov: ${{ matrix.codecov }}
+        mpi: ${{ matrix.mpi }}
+        build-system: ${{ matrix.build-system }}
+        hypre-dir: ${{ env.HYPRE_TOP_DIR }}
+        metis-dir: ${{ env.METIS_TOP_DIR }}
+        mfem-dir: ${{ env.MFEM_TOP_DIR }}
+        config-options: ${{ env.MFEM_EXTRA_CONFIG }}
+        library-only: ${{ matrix.target == 'dbg' }}

-      - name: prepare vcpkg binary cache location (Windows)
-        if: matrix.os == 'windows-latest' && steps.vcpkg-cache.outputs.cache-hit != 'true'
-        run: |
-          mkdir -p vcpkg_cache
+    # Run checks (and only checks) on debug targets
+    - name: checks
+      if: matrix.build-system == 'make' && matrix.target == 'dbg'
+      run: |
+        cd ${{ env.MFEM_TOP_DIR }}  && make check

-      - name: install metis (Windows)
-        if: matrix.mpi == 'par' && matrix.os == 'windows-latest'
-        env:
-          VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
-        run: |
-          vcpkg install metis-mfem --triplet=x64-windows-static --overlay-ports=${{ env.MFEM_TOP_DIR }}/config/vcpkg/ports
+    # Note: 'tests' include the unit tests
+    - name: tests
+      if: matrix.build-system == 'make' && matrix.target == 'opt'
+      run: |
+        cd ${{ env.MFEM_TOP_DIR }} && make test

-      # It's usually fine to build the above TPLs with a different compiler.
-      #
-      - name: install Enzyme (macOS w/ Enzyme)
-        if: matrix.enzyme && matrix.os == 'macos-latest'
-        run: |
-          export HOMEBREW_NO_INSTALL_CLEANUP=1
-          brew update
-          brew install enzyme
-          ENZYME_LLVM=$(brew info enzyme | sed -n 's/^Required:.*\(llvm[^ ]*\).*/\1/p')
-          LLVM_PREFIX=$(brew --prefix $ENZYME_LLVM)
-          echo "LLVM_PREFIX=$LLVM_PREFIX" >> $GITHUB_ENV
-          echo "OMPI_CC=$LLVM_PREFIX/bin/clang" >> $GITHUB_ENV
-          echo "OMPI_CXX=$LLVM_PREFIX/bin/clang++" >> $GITHUB_ENV
+    - name: cmake checks
+      if: matrix.build-system == 'cmake' && matrix.target == 'dbg'
+      run: |
+        CTEST_CONFIG="Debug"
+        cd ${{ env.MFEM_TOP_DIR }} && cmake --build build --target check --config ${CTEST_CONFIG}
+      shell: bash

-      # MFEM build and test
-      - name: build
-        uses: mfem/github-actions/build-mfem@v2.5
-        env:
-          VCPKG_DEFAULT_BINARY_CACHE: ${{ github.workspace }}/vcpkg_cache
-        with:
-          os: ${{ matrix.os }}
-          target: ${{ matrix.target }}
-          codecov: ${{ matrix.codecov }}
-          mpi: ${{ matrix.mpi }}
-          build-system: ${{ matrix.build-system }}
-          hypre-dir: ${{ env.HYPRE_TOP_DIR }}
-          metis-dir: ${{ env.METIS_TOP_DIR }}
-          mfem-dir: ${{ env.MFEM_TOP_DIR }}
-          precision: ${{ matrix.precision }}
-          config-options: ${{ matrix.config-opts }}
-          library-only: ${{ matrix.target == 'dbg' && matrix.os != 'ubuntu-latest' }}
+    - name: cmake unit tests (Ubuntu)
+      if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os == 'ubuntu-latest'
+      run: |
+        CTEST_CONFIG="Release"
+        [[ ${{ matrix.target }} == 'dbg' ]] && CTEST_CONFIG="Debug"
+        cd ${{ env.MFEM_TOP_DIR }}/build/tests/unit && ctest --output-on-failure -C ${CTEST_CONFIG}
+      shell: bash

-      # Run checks (and only checks) on debug targets
-      - name: checks
-        if: matrix.build-system == 'make' && matrix.target == 'dbg'
-        run: |
-          cd ${{ env.MFEM_TOP_DIR }}  && make check
+    - name: cmake tests
+      if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os != 'ubuntu-latest'
+      run: |
+        CTEST_CONFIG="Release"
+        cd ${{ env.MFEM_TOP_DIR }}/build && ctest --output-on-failure -C ${CTEST_CONFIG}
+      shell: bash

-      # Note: 'tests' include the unit tests
-      - name: tests
-        if: matrix.build-system == 'make' && (matrix.target == 'opt' || matrix.os == 'ubuntu-latest')
-        run: |
-          cd ${{ env.MFEM_TOP_DIR }} && make test
-
-      - name: cmake checks
-        if: matrix.build-system == 'cmake' && matrix.target == 'dbg'
-        run: |
-          CTEST_CONFIG="Debug"
-          cd ${{ env.MFEM_TOP_DIR }} && cmake --build build --target check --config ${CTEST_CONFIG}
-        shell: bash
-
-      - name: cmake unit tests (Ubuntu)
-        if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os == 'ubuntu-latest'
-        run: |
-          CTEST_CONFIG="Release"
-          [[ ${{ matrix.target }} == 'dbg' ]] && CTEST_CONFIG="Debug"
-          cd ${{ env.MFEM_TOP_DIR }}/build/tests/unit && ctest --output-on-failure -C ${CTEST_CONFIG}
-        shell: bash
-
-      - name: cmake tests
-        if: matrix.build-system == 'cmake' && matrix.target == 'opt' && matrix.os != 'ubuntu-latest'
-        run: |
-          CTEST_CONFIG="Release"
-          cd ${{ env.MFEM_TOP_DIR }}/build && \
-          ctest --output-on-failure -C ${CTEST_CONFIG} || \
-          ctest --rerun-failed --output-on-failure -C ${CTEST_CONFIG}
-        shell: bash
-
-      - name: make install
-        if: matrix.build-system == 'make'
-        run: |
-          cd ${{ env.MFEM_TOP_DIR }} && make install
-
-      - name: cmake install
-        if: matrix.build-system == 'cmake'
-        run: |
-          CONFIG="Release"
-          [[ ${{ matrix.target }} == 'dbg' ]] && CONFIG="Debug"
-          TARGET="install"
-          [[ ${{ matrix.os }} == 'windows-latest' ]] && TARGET="INSTALL"
-          cd ${{ env.MFEM_TOP_DIR }} && \
-          cmake --build build --target ${TARGET} --config ${CONFIG}
-        shell: bash
-
-      # Code coverage (process and upload reports)
-      - name: codecov
-        if: matrix.codecov == 'YES'
-        uses: mfem/github-actions/upload-coverage@v2.5
-        with:
-          name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}
-          project_dir: ${{ env.MFEM_TOP_DIR }}
-          directories: "fem general linalg mesh"
+    # Code coverage (process and upload reports)
+    - name: codecov
+      if: matrix.codecov == 'YES'
+      uses: mfem/github-actions/upload-coverage@v2.2
+      with:
+        name: ${{ matrix.os }}-${{ matrix.build-system }}-${{ matrix.target }}-${{ matrix.mpi }}-${{ matrix.hypre-target }}
+        project_dir: ${{ env.MFEM_TOP_DIR }}
+        directories: "fem general linalg mesh"
@@ -13,14 +13,10 @@ name: "Static Analysis"

 on:
  push:
-    branches: ["master", "next"]
+    branches: [ "master", "next"]
  pull_request:
    # The branches below must be a subset of the branches above
-    branches: ["master"]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
+    branches: [ "master" ]

 jobs:
  analyze:
@@ -39,35 +35,36 @@ jobs:
        # Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support

    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
+    - name: Checkout repository
+      uses: actions/checkout@v3

-      # Initializes the CodeQL tools for scanning.
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v2
-        with:
-          languages: ${{ matrix.language }}
-          # If you wish to specify custom queries, you can do so here or in a config file.
-          # By default, queries listed here will override any specified in a config file.
-          # Prefix the list here with "+" to use these queries and those in the config file.
+    # Initializes the CodeQL tools for scanning.
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v2
+      with:
+        languages: ${{ matrix.language }}
+        # If you wish to specify custom queries, you can do so here or in a config file.
+        # By default, queries listed here will override any specified in a config file.
+        # Prefix the list here with "+" to use these queries and those in the config file.

-          # Details on CodeQL's query packs refer to : https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
-          # queries: security-extended,security-and-quality
+        # Details on CodeQL's query packs refer to : https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+        # queries: security-extended,security-and-quality

-      # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
-      # If this step fails, then you should remove it and run the build manually (see below)
-      - name: Autobuild
-        uses: github/codeql-action/autobuild@v2

-      # ℹ️ Command-line programs to run using the OS shell.
-      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
+    # If this step fails, then you should remove it and run the build manually (see below)
+    - name: Autobuild
+      uses: github/codeql-action/autobuild@v2

-      #   If the Autobuild fails above, remove it and uncomment the following three lines.
-      #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
+    # ℹ️ Command-line programs to run using the OS shell.
+    # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun

-      # - run: |
-      #   echo "Run, Build Application using script"
-      #   ./location_of_script_within_repo/buildscript.sh
+    #   If the Autobuild fails above, remove it and uncomment the following three lines.
+    #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.

-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v2
+    # - run: |
+    #   echo "Run, Build Application using script"
+    #   ./location_of_script_within_repo/buildscript.sh
+
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v2
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -22,10 +22,6 @@ on:
  pull_request:
  workflow_dispatch:

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 env:
  HYPRE_ARCHIVE: v2.19.0.tar.gz
  HYPRE_TOP_DIR: hypre-2.19.0
@@ -38,63 +34,67 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-      - name: checkout MFEM
-        uses: actions/checkout@v4
-        with:
-          path: mfem
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.11.0
+      with:
+        access_token: ${{ github.token }}

-      - name: Get MPI (Linux)
-        run: |
-          sudo apt-get install openmpi-bin libopenmpi-dev
-          export OMPI_MCA_rmaps_base_oversubscribe=1
+    - name: checkout MFEM
+      uses: actions/checkout@v3
+      with:
+        path: mfem

-      - name: Cache Hypre Install
-        id: hypre-cache
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.HYPRE_TOP_DIR }}
-          key: ${{ runner.os }}-ompi-build-${{ env.HYPRE_TOP_DIR }}-v2.5
+    - name: Get MPI (Linux)
+      run: |
+        sudo apt-get install mpich libmpich-dev

-      - name: Get Hypre
-        if: steps.hypre-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-hypre@v2.5
-        with:
-          archive: ${{ env.HYPRE_ARCHIVE }}
-          dir: ${{ env.HYPRE_TOP_DIR }}
-          target: int32
+    - name: Cache Hypre Install
+      id: hypre-cache
+      uses: actions/cache@v3
+      with:
+        path: ${{ env.HYPRE_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.HYPRE_TOP_DIR }}-v2.2

-      - name: Cache Metis Install
-        id: metis-cache
-        uses: actions/cache@v4
-        with:
-          path: ${{ env.METIS_TOP_DIR }}
-          key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.5
+    - name: Get Hypre
+      if: steps.hypre-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-hypre@v2.2
+      with:
+        archive: ${{ env.HYPRE_ARCHIVE }}
+        dir: ${{ env.HYPRE_TOP_DIR }}
+        target: int32

-      - name: Install Metis
-        if: steps.metis-cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-metis@v2.5
-        with:
-          archive: ${{ env.METIS_ARCHIVE }}
-          dir: ${{ env.METIS_TOP_DIR }}
+    - name: Cache Metis Install
+      id: metis-cache
+      uses: actions/cache@v3
+      with:
+        path: ${{ env.METIS_TOP_DIR }}
+        key: ${{ runner.os }}-build-${{ env.METIS_TOP_DIR }}-v2.2

-      # MFEM build and test
-      - name: build-mfem
-        uses: mfem/github-actions/build-mfem@v2.5
-        with:
-          os: ${{ runner.os }}
-          target: opt
-          codecov: NO
-          mpi: par
-          build-system: make
-          hypre-dir: ${{ env.HYPRE_TOP_DIR }}
-          metis-dir: ${{ env.METIS_TOP_DIR }}
-          mfem-dir: mfem
+    - name: Install Metis
+      if: steps.metis-cache.outputs.cache-hit != 'true'
+      uses: mfem/github-actions/build-metis@v2.2
+      with:
+        archive: ${{ env.METIS_ARCHIVE }}
+        dir: ${{ env.METIS_TOP_DIR }}

-      - name: test (no clean)
-        run: |
-          cd mfem && make test-noclean
+    # MFEM build and test
+    - name: build-mfem
+      uses: mfem/github-actions/build-mfem@v2.2
+      with:
+        os: ${{ runner.os }}
+        target: opt
+        codecov: NO
+        mpi: par
+        build-system: make
+        hypre-dir: ${{ env.HYPRE_TOP_DIR }}
+        metis-dir: ${{ env.METIS_TOP_DIR }}
+        mfem-dir: mfem

-      - name: gitignore
-        run: |
-          cd mfem/tests/scripts
-          ./runtest gitignore
+    - name: test (no clean)
+      run: |
+        cd mfem && make test-noclean
+
+    - name: gitignore
+      run: |
+        cd mfem/tests/scripts
+        ./runtest gitignore
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,10 +19,6 @@ on:
  pull_request:
  workflow_dispatch:

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 # This workflow is run on pushes to any branch in the MFEM repo (with or without
 # PRs), as well as on updates to PRs from forks. In particular, we do not
 # duplicate work by running on both pushes and updates to local PRs. We do that
@@ -37,54 +33,49 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: Cancel Previous Runs
+      uses: styfle/cancel-workflow-action@0.11.0
+      with:
+        access_token: ${{ github.token }}

-      - name: copyright check
-        id: copyright
-        run: |
-          ./config/githooks/pre-push --copyright
+    - name: checkout mfem
+      uses: actions/checkout@v3

-        continue-on-error: true
+    - name: copyright check
+      id: copyright
+      run: |
+        ./config/githooks/pre-push --copyright

-      - name: license check
-        id: license
-        run: |
-          ./config/githooks/pre-push --license
-        continue-on-error: true
+      continue-on-error: true

-      - name: release check
-        id: release
-        run: |
-          ./config/githooks/pre-push --release
-        continue-on-error: true
+    - name: license check
+      id: license
+      run: |
+        ./config/githooks/pre-push --license
+      continue-on-error: true

-      - name: math check
-        id: math
-        run: |
-          ./config/githooks/pre-push --math
-        continue-on-error: true
+    - name: release check
+      id: release
+      run: |
+        ./config/githooks/pre-push --release
+      continue-on-error: true

-      - name: wrap-up
-        if: |
-          steps.copyright.outcome != 'success' ||
-          steps.license.outcome != 'success' ||
-          steps.release.outcome != 'success' ||
-          steps.math.outcome != 'success'
-        run: |
-          if [[ "${{ steps.copyright.outcome }}" != "success" ]]; then
-            echo "copyright check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.license.outcome }}" != "success" ]]; then
-            echo "license check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.release.outcome }}" != "success" ]]; then
-            echo "release check failed, unroll log for details"
-          fi
-          if [[ "${{ steps.math.outcome }}" != "success" ]]; then
-            echo "math check failed, unroll log for details"
-          fi
-          exit 1
+    - name: wrap-up
+      if: |
+        steps.copyright.outcome != 'success' ||
+        steps.license.outcome != 'success' ||
+        steps.release.outcome != 'success'
+      run: |
+        if [[ "${{ steps.copyright.outcome }}" != "success" ]]; then
+          echo "copyright check failed, unroll log for details"
+        fi
+        if [[ "${{ steps.license.outcome }}" != "success" ]]; then
+          echo "license check failed, unroll log for details"
+        fi
+        if [[ "${{ steps.release.outcome }}" != "success" ]]; then
+          echo "release check failed, unroll log for details"
+        fi
+        exit 1

  code-style:
    runs-on: ubuntu-latest
@@ -92,16 +83,16 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: checkout mfem
+      uses: actions/checkout@v3

-      - name: get astyle
-        run: |
-          sudo apt-get install astyle
+    - name: get astyle
+      run: |
+        sudo apt-get install astyle

-      - name: style check
-        run: |
-          ./config/githooks/pre-push --style
+    - name: style check
+      run: |
+        ./config/githooks/pre-push --style

  documentation:
    runs-on: ubuntu-latest
@@ -109,22 +100,22 @@ jobs:
      (github.event_name == 'push' ||
       github.event.pull_request.head.repo.full_name != github.repository)
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
+    - name: checkout mfem
+      uses: actions/checkout@v3

-      - name: get doxygen and graphviz
-        run: |
-          sudo apt-get install doxygen graphviz
+    - name: get doxygen and graphviz
+      run: |
+        sudo apt-get install doxygen graphviz

-      - name: update doxygen config file
-        run: |
-          cd doc
-          doxygen -u CodeDocumentation.conf.in
+    - name: update doxygen config file
+      run: |
+        cd doc
+        doxygen -u CodeDocumentation.conf.in

-      - name: build documentation
-        run: |
-          cd tests/scripts
-          ./runtest documentation
+    - name: build documentation
+      run: |
+        cd tests/scripts
+        ./runtest documentation

  branch-history:
    if: |
@@ -134,16 +125,16 @@ jobs:
       github.event.pull_request.head.repo.full_name != github.repository)
    runs-on: ubuntu-latest
    steps:
-      - name: checkout mfem
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
+    - name: checkout mfem
+      uses: actions/checkout@v3
+      with:
+        fetch-depth: 0

-      - name: branch-history
-        run: |
-          # We override origin to make sure we point to the main repo.
-          # This is to have consistent test results on PRs from forks.
-          git remote remove origin
-          git remote add origin https://github.com/mfem/mfem.git
-          git checkout -b gh-actions-branch-history
-          ./config/githooks/pre-push --history
+    - name: branch-history
+      run: |
+        # We override origin to make sure we point to the main repo.
+        # This is to have consistent test results on PRs from forks.
+        git remote remove origin
+        git remote add origin https://github.com/mfem/mfem.git
+        git checkout -b gh-actions-branch-history
+        ./config/githooks/pre-push --history
@@ -1,39 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: build-hypre
-on:
-  workflow_call:
-jobs:
-  build-hypre:
-    runs-on: ubuntu-latest
-    name: 2.19.0
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/config
-      - name: Cache
-        id: cache
-        uses: actions/cache@v4
-        with:
-          path: ${{env.HYPRE_DIR}}
-          key: ${{runner.os}}-ompi-build-${{env.HYPRE_DIR}}-int32-fp64-v2.5
-      - name: Setup
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: ./.github/actions/sanitize/mpi
-      - name: Build
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-hypre@v2.5
-        with:
-          archive: ${{env.HYPRE_TGZ}}
-          dir: ${{env.HYPRE_DIR}}
-          target: int32
-          precision: fp64
-          build-system: make
@@ -1,76 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: build-libcxx
-on:
-  workflow_call:
-jobs:
-  build-llvm-libcxx:
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        sanitizer: [asan, msan, ubsan]
-        include:
-          - sanitizer: asan
-            llvm_use_sanitizer: "Address"
-          - sanitizer: msan
-            llvm_use_sanitizer: "MemoryWithOrigins"
-          - sanitizer: ubsan
-            llvm_use_sanitizer: "Undefined"
-    name: ${{matrix.sanitizer}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/config
-        with:
-          NO_FLAGS: true
-      - name: Cache
-        id: cache
-        uses: actions/cache@v4
-        with:
-          path: ${{env.LLVM_DIR}}
-          key: build-libcxx-${{env.LLVM_VER}}-${{matrix.sanitizer}}
-      - name: Clone
-        if: ${{ steps.cache.outputs.cache-hit != 'true' }}
-        run: >
-          git clone --filter=blob:none --depth=1
-          --branch llvmorg-${{env.LLVM_VER}}
-          --no-checkout https://github.com/llvm/llvm-project.git llvm-project
-      - name: Checkout
-        if: ${{ steps.cache.outputs.cache-hit != 'true' }}
-        working-directory: llvm-project
-        run: |
-          git sparse-checkout set --cone
-          git checkout llvmorg-${{env.LLVM_VER}}
-          git sparse-checkout set cmake llvm/cmake runtimes libcxx libcxxabi
-      - name: Mkdir
-        if: ${{ steps.cache.outputs.cache-hit != 'true' }}
-        run: mkdir ${{env.LLVM_DIR}}
-      - name: CMake
-        if: ${{ steps.cache.outputs.cache-hit != 'true' }}
-        working-directory: ${{env.LLVM_DIR}}
-        run: >
-          VERBOSE=1
-          cmake -GNinja ../llvm-project/runtimes/
-          -DCMAKE_C_COMPILER=${{env.CC}}
-          -DCMAKE_CXX_COMPILER=${{env.CXX}}
-          -DCMAKE_BUILD_TYPE=RelWithDebInfo
-          -DCMAKE_INSTALL_PREFIX=/usr
-          -DLLVM_USE_SANITIZER=${{matrix.llvm_use_sanitizer}}
-          -DLLVM_BUILD_32_BITS=OFF
-          -DLIBCXXABI_USE_LLVM_UNWINDER=OFF
-          -DLLVM_INCLUDE_TESTS=OFF
-          -DLIBCXX_INCLUDE_TESTS=OFF
-          -DLIBCXX_INCLUDE_BENCHMARKS=OFF
-          -DLLVM_ENABLE_RUNTIMES='libcxx;libcxxabi'
-      - name: Build
-        if: ${{ steps.cache.outputs.cache-hit != 'true' }}
-        working-directory: ${{env.LLVM_DIR}}
-        run: cmake --build . -- cxx cxxabi
@@ -1,38 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: build-file-lsan
-on:
-  workflow_call:
-jobs:
-  build-file-lsan:
-    runs-on: ubuntu-latest
-    name: lsan.supp
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/config
-      - name: Cache
-        id: cache
-        uses: actions/cache@v4
-        with:
-          path: ${{env.LSAN_DIR}}
-          key: build-lsan-suppression-file
-      - name: Setup
-        if: steps.cache.outputs.cache-hit != 'true'
-        run: |
-          mkdir -p ${{env.LSAN_DIR}}
-          cat << EOF > ${{env.LSAN_DIR}}/${{env.LSAN_FILE}}
-          leak:libevent_core-2.1.so
-          leak:ompi_mpi_finalize
-          leak:ompi_mpi_init
-          leak:PMPI_Init
-          leak:strdup
-          EOF
@@ -1,36 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: build-metis
-on:
-  workflow_call:
-jobs:
-  build-metis:
-    runs-on: ubuntu-latest
-    name: 4.0.3
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/config
-      - name: Cache
-        id: cache
-        uses: actions/cache@v4
-        with:
-          path: ${{env.METIS_DIR}}
-          key: ${{runner.os}}-build-${{env.METIS_DIR}}-v2.5
-      - name: Setup
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: ./.github/actions/sanitize/mpi
-      - name: Build
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: mfem/github-actions/build-metis@v2.5
-        with:
-          archive: ${{env.METIS_TGZ}}
-          dir: ${{env.METIS_DIR}}
@@ -1,197 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: Sanitize
-on:
-  workflow_call:
-    inputs:
-      par:
-        description: 'Whether to build for parallel (true/false)'
-        required: false
-        default: false
-        type: boolean
-      sanitizer:
-        description: 'Sanitizer to use (asan, msan, ubsan)'
-        required: true
-        default: asan
-        type: string
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/mfem
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-
-  check:
-    needs: [build]
-    runs-on: ubuntu-latest
-    env:
-      ex: ${{inputs.par && 'ex1p' || 'ex1'}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/examples/${{env.ex}}
-      - name: MFEM Check
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: ninja -v check
-
-  examples:
-    needs: [check]
-    runs-on: ubuntu-latest
-    env:
-      exclude: ${{inputs.par && '-E "_ser"' || ''}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/examples/ex1
-      - name: Build Examples
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: ninja -v examples
-      - name: Test Examples
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: |
-          ${{env.CTEST}} examples ${{env.exclude}} --show-only
-          ${{env.CTEST}} examples ${{env.exclude}}
-
-  miniapps:
-    needs: [check]
-    runs-on: ubuntu-latest
-    env:
-      exclude: ${{inputs.par && '-E "_ser"' || ''}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/miniapps/meshing/minimal-surface
-      - name: Build Miniapps
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: ninja -v miniapps
-      - name: Test Miniapps
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: |
-          ${{env.CTEST}} miniapps ${{env.exclude}} --show-only
-          ${{env.CTEST}} miniapps ${{env.exclude}}
-
-  tests-miniapps:
-    needs: [check]
-    runs-on: ubuntu-latest
-    env:
-      run: ${{inputs.par && '-R "_cpu_np"' || ''}}
-      exclude: ${{inputs.par && '"unit_tests|debug"' || '"^unit_tests$|debug"'}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/tests/unit/sedov_tests_cpu
-      - name: Build Tests Unit Miniapps
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: ninja -v tests/unit/all
-      - name: Run Tests Unit Miniapps
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: |
-          ${{env.CTEST}} tests/unit -E ${{env.exclude}} ${{env.run}} --show-only
-          ${{env.CTEST}} tests/unit -E ${{env.exclude}} ${{env.run}}
-
-  tests-unit-build:
-    needs: [check]
-    runs-on: ubuntu-latest
-    env:
-      unit_tests: ${{inputs.par && 'punit_tests' || 'unit_tests'}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/tests/unit/${{env.unit_tests}}
-      - name: Build Unit Tests
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: ninja -v ${{env.unit_tests}}
-      - name: Delete object files
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build/tests/unit
-        run: find . -type f -name '*.o' -delete
-      - uses: actions/upload-artifact@v4
-        with:
-          name: tests-${{inputs.par}}-${{inputs.sanitizer}}
-          path: mfem/build/tests/unit/${{env.unit_tests}}
-          if-no-files-found: error
-          retention-days: 1
-          overwrite: false
-
-  tests-unit-run:
-    needs: [tests-unit-build]
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        tag: [0, 1, 2, 3]
-    name: tests-unit-run-${{matrix.tag}}
-    env:
-      unit_tests: ${{inputs.par && 'punit_tests' || 'unit_tests'}}
-      np: ${{inputs.par && '_np=2' || ''}}
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/sanitize/restore
-        id: restore
-        with:
-          par: ${{inputs.par}}
-          sanitizer: ${{inputs.sanitizer}}
-          cache-path: mfem/build/tests/unit/${{env.unit_tests}}
-      - uses: actions/download-artifact@v4
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        with:
-          name: tests-${{inputs.par}}-${{inputs.sanitizer}}
-          path: mfem/build/tests/unit
-      - name: Split Unit Tests
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build/tests/unit
-        run: |
-          chmod 755 ${{env.unit_tests}}
-          ./${{env.unit_tests}} --list-test-names-only | tail -n +2 > list-test-names
-          shuf list-test-names -o list-test-names
-          split --verbose -n l/4 -d -a 1 list-test-names list-test-names-
-      - name: Cat Unit Tests ${{matrix.tag}}
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build/tests/unit
-        run: cat list-test-names-${{matrix.tag}}
-      - name: Run Unit Tests ${{matrix.tag}}
-        if: ${{steps.restore.outputs.cache-hit != 'true'}}
-        working-directory: mfem/build
-        run: |
-          ${{env.CTEST}} tests/unit -R "${{env.unit_tests}}${{env.np}}" --show-only
-          ${{env.CTEST}} tests/unit -R "${{env.unit_tests}}${{env.np}}"
@@ -1,73 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
---
-name: Sanitizers
-
-permissions:
-  actions: write
-
-on:
-  push:
-    branches: ["master", "next"]
-  pull_request:
-  workflow_dispatch:
-
-concurrency:
-  group: ${{github.workflow}}-${{github.ref}}
-  cancel-in-progress: true
-
-jobs:
-
-  # Build steps for dependencies
-  build-hypre:
-    uses: ./.github/workflows/sanitize-build-hypre.yml
-
-  build-metis:
-    uses: ./.github/workflows/sanitize-build-metis.yml
-
-  build-lsan:
-    uses: ./.github/workflows/sanitize-build-lsan.yml
-
-  build-libcxx:
-    uses: ./.github/workflows/sanitize-build-libcxx.yml
-
-  # Serial sanitizers: asan, msan, ubsan
-  seq-asan:
-    needs: [build-libcxx]
-    uses: ./.github/workflows/sanitize-tests.yml
-    with:
-      sanitizer: asan
-
-  seq-msan:
-    needs: [build-libcxx]
-    uses: ./.github/workflows/sanitize-tests.yml
-    with:
-      sanitizer: msan
-
-  seq-ubsan:
-    needs: [build-libcxx]
-    uses: ./.github/workflows/sanitize-tests.yml
-    with:
-      sanitizer: ubsan
-
-  # Parallel sanitizers: asan, ubsan
-  par-asan:
-    needs: [build-libcxx, build-hypre, build-metis]
-    uses: ./.github/workflows/sanitize-tests.yml
-    with:
-      par: true
-      sanitizer: asan
-  par-ubsan:
-    needs: [build-libcxx, build-hypre, build-metis]
-    uses: ./.github/workflows/sanitize-tests.yml
-    with:
-      par: true
-      sanitizer: ubsan
@@ -1,75 +0,0 @@
-# This workflow warns and then closes issues and PRs that have had no activity for a specified amount of time.
-# For more information, see: https://github.com/actions/stale
-name: Mark stale issues and pull requests
-
-on:
-  workflow_dispatch:
-  schedule:
-  - cron: '0 0 * * *'
-
-jobs:
-  stale:
-
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-      pull-requests: write
-      actions: write
-
-    steps:
-    - uses: actions/stale@v9
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        stale-issue-message: ':warning: This issue has been automatically marked as stale because it has not had any activity in the last month. *If no activity occurs in the next week, it will be automatically closed.* Thank you for your contributions.'
-        stale-pr-message: ':warning: This PR has been automatically marked as stale because it has not had any activity in the last month. *If no activity occurs in the next week, it will be automatically closed.* Thank you for your contributions.'
-        days-before-stale: 30
-        days-before-close: 7
-        stale-issue-label: 'stale'
-        stale-pr-label: 'stale'
-        operations-per-run: 500
-        exempt-issue-labels: "bug,WIP,ready-for-review,in-review,in-next"
-        exempt-pr-labels: "bug,WIP,ready-for-review,in-review,in-next"
-
-  # Stale action for PRs with "in-review" label.
-  stale-in-review-pr:
-
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-      pull-requests: write
-      actions: write
-
-    steps:
-    - uses: actions/stale@v9
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        stale-pr-message: ':warning: This PR has been automatically marked as stale because it has not had any activity in the last 150 days. *If no activity occurs in the next 30 days, it will be automatically closed.* Thank you for your contributions.'
-        only-pr-labels: "in-review"
-        days-before-pr-stale: 150
-        days-before-pr-close: 30
-        days-before-issue-stale: -1
-        days-before-issue-close: -1
-        stale-pr-label: 'stale'
-        operations-per-run: 500
-
-  # Stale action for PRs with "WIP" label.
-  stale-wip-pr:
-
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-      pull-requests: write
-      actions: write
-
-    steps:
-    - uses: actions/stale@v9
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        stale-pr-message: ':warning: This PR has been automatically marked as stale because it has not had any activity in the last 300 days. *If no activity occurs in the next 30 days, it will be automatically closed.* Thank you for your contributions.'
-        only-pr-labels: "WIP"
-        days-before-pr-stale: 300
-        days-before-pr-close: 30
-        days-before-issue-stale: -1
-        days-before-issue-close: -1
-        stale-pr-label: 'stale'
-        operations-per-run: 500
@@ -1,31 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-name: "Trigger PyMFEM CI"
-
-on:
-  push:
-    branches:
-      - master
-
-jobs:
-  trigger-pymfem:
-    runs-on: ubuntu-latest
-    steps:
-    - name: Send POST request to trigger PyMFEM CI
-      run: |
-        curl -L \
-             -X POST \
-             -H "Accept: application/vnd.github+json" \
-             -H "Authorization: Bearer ${{ secrets.PYMFEM_CI_TOKEN }}" \
-             -H "X-GitHub-Api-Version: 2022-11-28" \
-             https://api.github.com/repos/mfem/pymfem/actions/workflows/build-and-test-dispatch.yml/dispatches \
-             -d '{"ref":"master", "inputs":{"test_options":"fast"}}'
@@ -8,7 +8,6 @@

 # Object and library files
 *.o
-*.o.tmp
 /libmfem.*
 /miniapps/common/libmfem-common.*

@@ -16,24 +15,17 @@
 CMakeCache.txt
 CMakeFiles/

-# Clangd server cache
-*.cache*
-
 # Backup files
 *~

 # Default install location
 /mfem/

-# Typical build directory
-/build/
-
 # Generated files in main directory, config/ and docs/
 /deps.mk
 config/_config.hpp
 config/config.mk
 config/sample-runs-build.log
-config/user.cmake
 config/user.mk
 doc/CodeDocumentation.conf
 doc/CodeDocumentation.html
@@ -61,8 +53,6 @@ examples/ex2[0-9]
 examples/ex2[0-9]p
 examples/ex3[0-9]
 examples/ex3[0-9]p
-examples/ex4[0-9]
-examples/ex4[0-9]p

 examples/refined.mesh
 examples/displaced.mesh
@@ -80,7 +70,6 @@ examples/sol_p.*
 examples/sol_r.*
 examples/sol_i.*
 examples/ex6p-checkpoint.*
-examples/order.*
 examples/ex9.mesh
 examples/ex9-mesh.*
 examples/ex9-init.*
@@ -98,6 +87,10 @@ examples/ex16.mesh
 examples/ex16-mesh.*
 examples/ex16-init.*
 examples/ex16-final.*
+examples/vortex-mesh.*
+examples/vortex.mesh
+examples/vortex-?-init.*
+examples/vortex-?-final.*
 examples/deformation.*
 examples/pressure.*
 examples/ex20.dat
@@ -116,14 +109,6 @@ examples/ex25p-*.*
 examples/ex28_*
 examples/ex28p_*
 examples/flux.*
-examples/dsol.*
-examples/cond.*
-examples/cond_j.*
-examples/cond_mesh.*
-examples/port_mesh.*
-examples/port_mode.*
-
-examples/euler-*

 examples/amgx/ex1
 examples/amgx/ex1p
@@ -133,16 +118,11 @@ examples/amgx/sol.gf
 examples/amgx/mesh.*
 examples/amgx/sol.*

-examples/caliper/ex1
-examples/caliper/ex1p
-examples/caliper/refined.mesh
-examples/caliper/sol.gf
-examples/caliper/mesh.*
-examples/caliper/sol.*
-
-examples/ginkgo/ex1
-examples/ginkgo/refined.mesh
-examples/ginkgo/sol.gf
+examples/gingko/ex1
+examples/gingko/refined.mesh
+examples/gingko/sol.gf
+examples/gingko/mesh.*
+examples/gingko/sol.*

 examples/hiop/ex9
 examples/hiop/ex9p
@@ -168,8 +148,8 @@ examples/petsc/velocity.*
 examples/petsc/elastic_energy.*
 examples/petsc/mode_*

-examples/pumi/ex[12]
-examples/pumi/ex[16]p
+examples/pumi/ex1
+examples/pumi/ex[126]p
 examples/pumi/refined.mesh
 examples/pumi/sol.gf
 examples/pumi/mesh.*
@@ -201,28 +181,19 @@ examples/superlu/sol.*
 miniapps/adjoint/cvsRoberts_ASAi_dns
 miniapps/adjoint/adjoint_advection_diffusion

-miniapps/dfem/dfem-minimal-surface
-miniapps/dfem/dfem-minimal-surface-output
-
 miniapps/electromagnetics/volta
 miniapps/electromagnetics/tesla
 miniapps/electromagnetics/maxwell
 miniapps/electromagnetics/joule
-miniapps/electromagnetics/lorentz
 miniapps/electromagnetics/Volta-AMR*
 miniapps/electromagnetics/Tesla-AMR*
 miniapps/electromagnetics/Maxwell-Parallel*
-miniapps/electromagnetics/Joule_[0-9]*
-miniapps/electromagnetics/Lorentz_[0-9]*
-miniapps/electromagnetics/Lorentz.dat
+miniapps/electromagnetics/Joule_*

 miniapps/gslib/field-diff
 miniapps/gslib/field-interp
 miniapps/gslib/findpts
 miniapps/gslib/pfindpts
-miniapps/gslib/schwarz_ex1
-miniapps/gslib/schwarz_ex1p
-miniapps/gslib/interpolated.gf

 miniapps/meshing/mobius-strip
 miniapps/meshing/klein-bottle
@@ -231,48 +202,29 @@ miniapps/meshing/twist
 miniapps/meshing/mesh-explorer
 miniapps/meshing/shaper
 miniapps/meshing/extruder
-miniapps/meshing/fit-node-position
 miniapps/meshing/trimmer
-miniapps/meshing/reflector
-miniapps/meshing/ref321
-miniapps/meshing/mesh-bounding-boxes
 miniapps/meshing/mesh-optimizer
 miniapps/meshing/pmesh-optimizer
-miniapps/meshing/pmesh-fitting
 miniapps/meshing/minimal-surface
 miniapps/meshing/pminimal-surface
 miniapps/meshing/polar-nc
-miniapps/meshing/mesh-quality
-miniapps/meshing/hpref
-miniapps/meshing/phpref
 miniapps/meshing/mobius-strip.mesh
 miniapps/meshing/klein-bottle.mesh
 miniapps/meshing/toroid-*.mesh
 miniapps/meshing/twist-*.mesh
-miniapps/meshing/mesh-explorer.mesh*
+miniapps/meshing/mesh-explorer.mesh
 miniapps/meshing/partitioning.txt
-miniapps/meshing/mesh-explorer-visit*
-miniapps/meshing/mesh-explorer-paraview/
 miniapps/meshing/shaper.mesh
 miniapps/meshing/extruder.mesh
 miniapps/meshing/trimmer.mesh
-miniapps/meshing/reflected.mesh
-miniapps/meshing/ref321.mesh
-miniapps/meshing/sol.gf
 miniapps/meshing/optimized*
 miniapps/meshing/perturbed*
 miniapps/meshing/polar-nc.mesh
-miniapps/meshing/mesh.*
-miniapps/meshing/order.*
-miniapps/meshing/sol.*
-miniapps/meshing/refined.mesh
-miniapps/meshing/bounding-box*
-miniapps/meshing/jacobian-determinant*

 miniapps/mtop/parheat
-miniapps/mtop/ParHeat/*
+miniapps/mtop/ParHeat*
 miniapps/mtop/seqheat
-miniapps/mtop/SeqHeat/*
+miniapps/mtop/SeqHeat*

 miniapps/autodiff/paradiff
 miniapps/autodiff/seqadiff
@@ -280,7 +232,7 @@ miniapps/autodiff/seqtest
 miniapps/autodiff/par_example
 miniapps/autodiff/seq_example
 miniapps/autodiff/seq_test
-miniapps/autodiff/Example/*
+miniapps/autodiff/Exampl*

 miniapps/navier/navier_mms
 miniapps/navier/navier_kovasznay
@@ -289,40 +241,17 @@ miniapps/navier/navier_tgv
 miniapps/navier/navier_shear
 miniapps/navier/navier_3dfoc
 miniapps/navier/navier_turbchan
-miniapps/navier/navier_cht
 miniapps/navier/tgv_out*.txt
 miniapps/navier/*_output

 miniapps/nurbs/nurbs_ex1
 miniapps/nurbs/nurbs_ex1p
-miniapps/nurbs/nurbs_ex3
-miniapps/nurbs/nurbs_ex5
 miniapps/nurbs/nurbs_ex11p
-miniapps/nurbs/nurbs_ex24
-miniapps/nurbs/nurbs_solenoidal
-miniapps/nurbs/nurbs_printfunc
-miniapps/nurbs/nurbs_patch_ex1
-miniapps/nurbs/nurbs_curveint
-miniapps/nurbs/nurbs_surface
 miniapps/nurbs/refined.mesh
 miniapps/nurbs/mesh.*
-miniapps/nurbs/sol_?.gf
 miniapps/nurbs/sol.*
 miniapps/nurbs/mode_*
 miniapps/nurbs/Example1*
-miniapps/nurbs/Example3*
-miniapps/nurbs/Example5*
-miniapps/nurbs/Solenoidal*
-miniapps/nurbs/ParaView
-miniapps/nurbs/sin-fit.mesh
-miniapps/nurbs/ex5.mesh
-miniapps/nurbs/exsol.mesh
-miniapps/nurbs/CurveInt
-miniapps/nurbs/nurbs_naca_cmesh
-miniapps/nurbs/naca-cmesh.mesh
-miniapps/nurbs/glvis_naca-cmesh.mesh
-miniapps/nurbs/Naca_cmesh
-miniapps/nurbs/*-Surface.mesh

 miniapps/performance/ex1
 miniapps/performance/ex1p
@@ -344,16 +273,9 @@ miniapps/shifted/lsf_integral
 miniapps/tools/display-basis
 miniapps/tools/load-dc
 miniapps/tools/convert-dc
-miniapps/tools/gridfunction-bounds
 miniapps/tools/lor-transfer
-miniapps/tools/plor-transfer
 miniapps/tools/get-values
-miniapps/tools/tmop-check-metric
-miniapps/tools/tmop-metric-magnitude
-miniapps/tools/nodal-transfer
-miniapps/tools/ParaView
-miniapps/tools/gridfunc_*
-miniapps/tools/mesh_*
+miniapps/tools/check-tmop-metric

 miniapps/toys/automata
 miniapps/toys/life
@@ -362,7 +284,6 @@ miniapps/toys/rubik
 miniapps/toys/snake
 miniapps/toys/lissajous
 miniapps/toys/mondrian
-miniapps/toys/spiral
 miniapps/toys/snake-init.mesh
 miniapps/toys/snake-user.mesh
 miniapps/toys/snake-joined.mesh
@@ -380,54 +301,28 @@ miniapps/toys/mondrian.mesh
 miniapps/solvers/block-solvers
 miniapps/solvers/lor_solvers
 miniapps/solvers/plor_solvers
-miniapps/solvers/lor_elast
 miniapps/solvers/ParaView
 miniapps/solvers/mesh.*
 miniapps/solvers/sol.*

-miniapps/hdiv-linear-solver/darcy
-miniapps/hdiv-linear-solver/grad_div
-
 miniapps/parelag/MultilevelHcurlHdivSolver
 miniapps/parelag/*.mesh

 miniapps/multidomain/multidomain
-miniapps/multidomain/multidomain_nd
-miniapps/multidomain/multidomain_rt
 miniapps/hooke/hooke

-miniapps/dpg/diffusion
-miniapps/dpg/pdiffusion
-miniapps/dpg/convection-diffusion
-miniapps/dpg/pconvection-diffusion
-miniapps/dpg/acoustics
-miniapps/dpg/pacoustics
-miniapps/dpg/maxwell
-miniapps/dpg/pmaxwell
-miniapps/dpg/ParaView
-
-miniapps/spde/generate_random_field
-miniapps/spde/ParaView
-
-miniapps/tribol/contact-patch-test
-
-miniapps/diag-smoothers/abs-l1-jacobi
-miniapps/diag-smoothers/mg-abs-l1-jacobi
-
 # Unit test binary and outputs
 tests/unit/output_meshes
 tests/unit/unit_tests
 tests/unit/punit_tests
-tests/unit/gpu_unit_tests
-tests/unit/pgpu_unit_tests
+tests/unit/cunit_tests
+tests/unit/pcunit_tests
 tests/unit/sedov_tests_*
 tests/unit/psedov_tests_*
 tests/unit/tmop_pa_tests_*
 tests/unit/ptmop_pa_tests_*
 tests/unit/ceed_tests
 tests/unit/debug_device_tests
-tests/unit/parallel_in_serial.mesh
-tests/unit/parallel_in_serial.gf

 # Benchmark binaries
 tests/benchmarks/bench_ceed
@@ -454,9 +349,3 @@ pkg.gitcommit

 # Jupyter Notebook Checkpoints
 .ipynb_checkpoints
-
-# emacs tag file
-TAGS
-
-# vs code
-.vscode
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -13,16 +13,13 @@
 # at Lawrence Livermore National Laboratory (LLNL). This entire pipeline is
 # LLNL-specific!

-include:
-  - project: 'lc-templates/id_tokens'
-    file: 'id_tokens.yml'

 # The pipeline is divided into stages. Usually, jobs in a given stage wait for
 # the preceding stages to complete before to start. However, we sometimes use
 # the "needs" keyword and express the DAG of jobs for more efficiency.
 # - We use setup and setup_baseline phases to download content outside of mfem
 #   directory.
-# - Allocate/Release is where Dane resource are allocated/released once for all.
+# - Allocate/Release is where quartz resource are allocated/released once for all.
 # - Build and Test is where we build and MFEM for multiple toolchains.
 # - Baseline_checks gathers baseline-type test suites execution
 # - Baseline_publish, only available on master, allows to update baseline
@@ -53,7 +50,7 @@ variables:
  AUTOTEST_COMMIT: "YES"

 # Trigger subpipelines:
-dane-build-and-test:
+quartz-build-and-test:
  stage: sub-pipelines
  variables:
    # Explicitly pass down values that we want to be able to set when triggering
@@ -61,10 +58,10 @@ dane-build-and-test:
    AUTOTEST: "${AUTOTEST}"
    AUTOTEST_COMMIT: "${AUTOTEST_COMMIT}"
  trigger:
-    include: .gitlab/dane-build-and-test.yml
+    include: .gitlab/quartz-build-and-test.yml
    strategy: depend

-dane-baseline:
+quartz-baseline:
  stage: sub-pipelines
  variables:
    # Explicitly pass down values that we want to be able to set when triggering
@@ -73,7 +70,7 @@ dane-baseline:
    AUTOTEST: "${AUTOTEST}"
    AUTOTEST_COMMIT: "${AUTOTEST_COMMIT}"
  trigger:
-    include: .gitlab/dane-baseline.yml
+    include: .gitlab/quartz-baseline.yml
    strategy: depend

 lassen-build-and-test:
@@ -24,7 +24,7 @@ and `test type`.

 Machines typically include:

-* Dane: Intel Sapphire Rapids
+* Quartz: Intel bi-socket x86
 * Lassen: Power9 + Nvidia GPU
 * Corona: AMD GPU

@@ -76,13 +76,13 @@ with a spack spec of MFEM, within the limits permitted by the MFEM spack
 package.

 In any build-and-test sub-pipeline a job basically consists in defining the
-spack spec to use. Adding a job on Dane for example resumes to:
+spack spec to use. Adding a job on quartz for example resumes to:

 ```yaml
 <job_name>:
  variables:
    SPEC: "<spack_spec>"
-  extends: .build_and_test_on_dane
+  extends: .build_and_test_on_quartz
 ```

 The remaining and non trivial work is to make sure this spec is working. To
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -9,10 +9,6 @@
 # terms of the BSD-3 license. We welcome feedback and contributions, see file
 # CONTRIBUTING.md for details.

-include:
-  - project: 'lc-templates/id_tokens'
-    file: 'id_tokens.yml'
-
 # We define the following GitLab pipeline variables:
 variables:

@@ -24,7 +20,7 @@ variables:
 # TODO: add a clean-up mechanism
  BUILD_ROOT: ${USER_CI_TOP_DIR}/${CI_PROJECT_NAME}-${MACHINE_NAME}-pipeline-${CI_PIPELINE_ID}

-# On LLNL's Dane, there is only one allocation shared among jobs in order to
+# On LLNL's quartz, there is only one allocation shared among jobs in order to
 # save time and resource. This allocation has to be uniquely named so that we
 # are sure to retrieve it.
  ALLOC_NAME: ${CI_PROJECT_NAME}_ci_${CI_PIPELINE_ID}
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -35,8 +35,9 @@ variables:
    - when: on_success

 # Lassen uses a different job scheduler (spectrum lsf) that does not allow
-# pre-allocation the same way slurm does.  We use the pci queue on lassen
-# to speed-up the allocation.
+# pre-allocation the same way slurm does.  We use pdebug queue on lassen
+# to speed-up the allocation.  However this would not be scalable to
+# multiple builds.
 .build_and_test_on_lassen:
  extends: [.on_lassen]
  stage: build_and_test
@@ -44,5 +45,5 @@ variables:
    - echo ${MFEM_DATA_DIR}
    - echo ${SPEC}
    # Next script uses 'THREADS': leaving it empty --> it uses 'make all -j'
-    - lalloc 1 -W 45 -q pci --atsdisable tests/gitlab/build_and_test --spec "${SPEC}" --data-dir "${MFEM_DATA_DIR}" --data
+    - lalloc 1 -W 45 -q pdebug --atsdisable tests/gitlab/build_and_test --spec "${SPEC}" --data-dir "${MFEM_DATA_DIR}" --data
  needs: [setup]
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -9,17 +9,17 @@
 # terms of the BSD-3 license. We welcome feedback and contributions, see file
 # CONTRIBUTING.md for details.

-# GitLab pipelines configurations for the Dane machine at LLNL
+# GitLab pipelines configurations for the Quartz machine at LLNL
 variables:
-  MACHINE_NAME: dane
+  MACHINE_NAME: quartz

-.on_dane:
+.on_quartz:
  tags:
    - shell
-    - dane
+    - quartz
  rules:
-    # Don't run dane jobs if...
-    - if: '$CI_COMMIT_BRANCH =~ /_qnone/ || $ON_DANE == "OFF"'
+    # Don't run quartz jobs if...
+    - if: '$CI_COMMIT_BRANCH =~ /_qnone/ || $ON_QUARTZ == "OFF"'
      when: never
    # Don't run autotest update if...
    - if: '$CI_JOB_NAME =~ /report/ && $AUTOTEST != "YES"'
@@ -40,17 +40,16 @@ variables:
    - when: on_success

 # Spack helped builds
-# Generic dane build job, extending build script
-.build_and_test_on_dane:
-  extends: [.on_dane]
+# Generic quartz build job, extending build script
+.build_and_test_on_quartz:
+  extends: [.on_quartz]
  stage: build_and_test
  script:
    # THREADS is used by 'tests/gitlab/build_and_test', run below
-    # Dane has 224 threads/node and we run 7 separate jobs: 224=7*32
-    - export THREADS=28
+    - export THREADS=12
    - echo ${ALLOC_NAME}
    - export JOBID=$(squeue -h --name=${ALLOC_NAME} --format=%A)
    - echo ${JOBID}
    - echo ${MFEM_DATA_DIR}
    - echo ${SPEC}
-    - srun $( [[ -n "${JOBID}" ]] && echo "--jobid=${JOBID}" ) --reservation=ci -t 60 -N 1 tests/gitlab/build_and_test --spec "${SPEC}" --data-dir "${MFEM_DATA_DIR}" --data
+    - srun $( [[ -n "${JOBID}" ]] && echo "--jobid=${JOBID}" ) -t 45 -N 1 tests/gitlab/build_and_test --spec "${SPEC}" --data-dir "${MFEM_DATA_DIR}" --data
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -22,10 +22,12 @@
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -55,10 +57,12 @@
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,7 +18,7 @@
 setup_baseline:
  tags:
    - shell
-    - dane
+    - quartz
  stage: setup
  variables:
    GIT_STRATEGY: none
@@ -47,10 +47,12 @@ setup_baseline:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -16,7 +16,7 @@
 setup:
  tags:
    - shell
-    - dane
+    - quartz
  stage: setup
  variables:
    GIT_STRATEGY: none
@@ -35,11 +35,13 @@ setup:
      (
        date
        echo "Waiting to acquire lock on '$PWD/mfem-data.lock' ..."
-        # try to get an exclusive lock on fd 9 (mfem-data.lock) repeating the
-        # try every 5 seconds; we may want to add a counter for the number of
+        # try to get an exclusive lock on fd 9 (mfem-data.lock) repeating the try
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/mfem-data.lock'"
        date
@@ -67,10 +69,12 @@ setup:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,14 +14,14 @@ stages:
  - build_and_test
  - report

-opt_mpi_cuda_gcc:
+opt_mpi_cuda_xl_16_1_1_8:
  variables:
-    SPEC: "%gcc@8.3.1 +mpi +cuda cuda_arch=70"
+    SPEC: "%xl@16.1.1.8 +mpi +cuda cuda_arch=70"
  extends: .build_and_test_on_lassen

-opt_mpi_cuda_hypre_cuda_gcc:
+opt_mpi_cuda_hypre_cuda_xl:
  variables:
-    SPEC: "%gcc@8.3.1 +mpi +cuda cuda_arch=70 ^hypre+cuda~shared cuda_arch=70"
+    SPEC: "%xl@16.1.1.8 +mpi +cuda cuda_arch=70 ^hypre+cuda~shared cuda_arch=70"
  extends: .build_and_test_on_lassen

 # Jobs report
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,8 +19,8 @@ stages:
  - cleanup
  - baseline_publish

-baselinecheck_mfem_intel_dane:
-  extends: [.on_dane]
+baselinecheck_mfem_intel_quartz:
+  extends: [.on_quartz]
  stage: baseline_check
  variables:
    # TPLS_DIR is used in .gitlab/scripts/baseline to provide the tpls location
@@ -31,8 +31,8 @@ baselinecheck_mfem_intel_dane:
  script:
    - echo ${BUILD_ROOT}
    - echo ${TPLS_DIR}
-    # Used by the tests in MFEM/tests, dane has 224 threads/node:
-    - export MFEM_TEST_NP=192
+    # Used by the tests in MFEM/tests:
+    - export MFEM_TEST_NP=32
    # The next script uses the following environment variables:
    # * BASELINE_TEST, SYS_TYPE, CI_PROJECT_DIR, ARTIFACTS_DIR,
    # * BUILD_ROOT, TPLS_DIR, MACHINE_NAME
@@ -44,7 +44,7 @@ baselinecheck_mfem_intel_dane:
  allow_failure: true

 cleanup:
-  extends: .on_dane
+  extends: .on_quartz
  stage: cleanup
  variables:
    GIT_STRATEGY: none
@@ -53,7 +53,7 @@ cleanup:
    - rm -rf "${BUILD_ROOT}" || true

 report_baseline:
-  extends: [.on_dane]
+  extends: [.on_quartz]
  stage: baseline_report
  script:
    - echo ${MACHINE_NAME}
@@ -66,10 +66,12 @@ report_baseline:
        date
        echo "Waiting to acquire lock on '$PWD/autotest.lock' ..."
        # try to get an exclusive lock on fd 9 (autotest.lock) repeating the try
-        # every 5 seconds; we may want to add a counter for the number of
+        # every 5 seconds; simply using no timeout, i.e. 'flock 9', causes the
+        # command to hang indefinitely sometimes, so we use the timeout & retry
+        # as a workaround; we may want to add a counter for the number of
        # retries to interrupt a potential infinite loop
-        while ! flock -n 9; do
-          sleep 5
+        while ! flock -w 5 9; do
+          true
        done
        echo "Acquired lock on '$PWD/autotest.lock'"
        date
@@ -80,20 +82,18 @@ report_baseline:
        rundir="${MACHINE_NAME}/$(date +%Y-%m-%d)-gitlab-${BASELINE_TEST}-${CI_COMMIT_REF_SLUG}"
        rundir=$(${CI_PROJECT_DIR}/.gitlab/scripts/safe_create_rundir ${rundir})
        cp ${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/* ${rundir}
+        # We create an autotest-email.html file, because that's how we signal that there was a diff (temporary).
+        if [[ -f ${rundir}/${BASELINE_TEST}.err ]]; then
+          cp ${rundir}/${BASELINE_TEST}.err ${rundir}/autotest-email.html
+        fi
        printf "%s\n" "" "Pipeline URL:" "$CI_PIPELINE_URL" \
          >> ${rundir}/pipeline.txt
-        # We create an autotest-email.html file, because that's how we signal
-        # that there was an error / diff (temporary).
-        if [[ -f ${rundir}/${BASELINE_TEST}.err ]] || \
-           [[ -f ${rundir}/${BASELINE_TEST}-${MACHINE_NAME}.diff ]]; then
-          cp ${rundir}/pipeline.txt ${rundir}/autotest-email.html
-        fi
        msg="GitLab CI log for ${BASELINE_TEST} on ${MACHINE_NAME} ($(date +%Y-%m-%d))"
        if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
          git pull && \
          git add ${rundir} && \
          git commit -m "${msg}" && \
-          ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+          git push origin master
        else
          for file in ${rundir}/*; do
            echo "------------------------------"
@@ -113,8 +113,8 @@ report_baseline:
        exit $err
      ) 9> autotest.lock

-baselinepublish_mfem_dane:
-  extends: [.on_dane]
+baselinepublish_mfem_quartz:
+  extends: [.on_quartz]
  stage: baseline_publish
  rules:
    # - if: '$CI_COMMIT_BRANCH == "master" || $REBASELINE == "YES"'
@@ -129,5 +129,5 @@ baselinepublish_mfem_dane:

 include:
  - local: .gitlab/configs/common.yml
-  - local: .gitlab/configs/dane-config.yml
+  - local: .gitlab/configs/quartz-config.yml
  - local: .gitlab/configs/setup-baseline.yml
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,54 +19,59 @@ stages:
 allocate_resource:
  variables:
    GIT_STRATEGY: none
-  extends: .on_dane
+  extends: .on_quartz
  stage: allocate_resource
  script:
    - echo ${ALLOC_NAME}
-    - salloc --exclusive --nodes=1 --reservation=ci --time=60 --no-shell --job-name=${ALLOC_NAME}
+    - salloc --exclusive --nodes=1 --partition=pdebug --time=45 --no-shell --job-name=${ALLOC_NAME}
  timeout: 6h

-# GitLab jobs for the Dane machine at LLNL
-debug_ser_gcc_10:
+# GitLab jobs for the Quartz machine at LLNL
+debug_ser_gcc_4_9_3:
  variables:
-    SPEC: "%gcc@10.3.1 +debug~mpi"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@4.9.3 +debug~mpi"
+  extends: .build_and_test_on_quartz

-debug_par_gcc_10:
+debug_ser_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 +debug+mpi"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0 +debug~mpi"
+  extends: .build_and_test_on_quartz

-opt_ser_gcc_10:
+debug_par_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 ~mpi"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0 +debug+mpi"
+  extends: .build_and_test_on_quartz

-opt_par_gcc_10:
+opt_ser_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0 ~mpi"
+  extends: .build_and_test_on_quartz

-opt_par_gcc_10_sundials:
+opt_par_gcc_6_1_0:
  variables:
-    SPEC: "%gcc@10.3.1 +sundials"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0"
+  extends: .build_and_test_on_quartz

-opt_par_gcc_10_petsc:
+opt_par_gcc_6_1_0_sundials:
  variables:
-    SPEC: "%gcc@10.3.1 +petsc ^petsc+mumps~superlu-dist"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0 +sundials"
+  extends: .build_and_test_on_quartz

-opt_par_gcc_10_pumi:
+opt_par_gcc_6_1_0_petsc:
  variables:
-    SPEC: "%gcc@10.3.1 +pumi"
-  extends: .build_and_test_on_dane
+    SPEC: "%gcc@6.1.0 +petsc ^petsc+mumps~superlu-dist"
+  extends: .build_and_test_on_quartz
+
+opt_par_gcc_6_1_0_pumi:
+  variables:
+    SPEC: "%gcc@6.1.0 +pumi"
+  extends: .build_and_test_on_quartz

 # Release
 release_resource:
  variables:
    GIT_STRATEGY: none
-  extends: .on_dane
+  extends: .on_quartz
  stage: release_resource_and_report
  script:
    - echo ${ALLOC_NAME}
@@ -78,17 +83,17 @@ release_resource:
 report_job_success:
  stage: release_resource_and_report
  extends:
-    - .on_dane
+    - .on_quartz
    - .report_job_success

 report_job_failure:
  stage: release_resource_and_report
  extends:
-    - .on_dane
+    - .on_quartz
    - .report_job_failure

 include:
  - local: .gitlab/configs/common.yml
-  - local: .gitlab/configs/dane-config.yml
+  - local: .gitlab/configs/quartz-config.yml
  - local: .gitlab/configs/setup-build-and-test.yml
  - local: .gitlab/configs/report-build-and-test.yml
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,9 +14,6 @@
 # locals
 glob_err=${BASELINE_TEST}.err
 base=${BASELINE_TEST}-${SYS_TYPE}
-if [[ "${MACHINE_NAME}" == "dane" ]]; then
-  base="${BASELINE_TEST}-${MACHINE_NAME}"
-fi
 base_diff=${base}.diff
 base_patch=${base}.patch
 base_out=${base}.out
@@ -31,48 +28,61 @@ cd tests
 mkdir _${BASELINE_TEST} && cd _${BASELINE_TEST}

 # run
-if [[ "${MACHINE_NAME}" == "dane" ]]; then
-  salloc --nodes=1 --exclusive --reservation=ci ../runtest ../../mfem "${BASELINE_TEST} ${TPLS_DIR}"
+if [[ "${MACHINE_NAME}" == "quartz" || "${MACHINE_NAME}" == "ruby" ]]; then
+  salloc --nodes=1 -p pdebug ../runtest ../../mfem "${BASELINE_TEST} ${TPLS_DIR}"
 elif [[ ${MACHINE_NAME} == "corona" ]]; then
  salloc --nodes=1 -t 60 -p pbatch ../runtest ../../mfem "${BASELINE_TEST} ${TPLS_DIR}"
 elif [[ ${MACHINE_NAME} == "lassen" ]]; then
-  lalloc 1 -q pci ../runtest ../../mfem "${BASELINE_TEST} ${TPLS_DIR}"
+  lalloc 1 -q pdebug ../runtest ../../mfem "${BASELINE_TEST} ${TPLS_DIR}"
 else
  echo "Unknown machine: MACHINE_NAME=$MACHINE_NAME"
  exit 1
 fi
-status="$?"

 # post
 mkdir ${artifacts_path}

-if [[ -f ${BASELINE_TEST}.out ]]; then
-  cp ${BASELINE_TEST}.out ${artifacts_path}
-fi
-if [[ -s ${glob_err} ]]; then
-  echo "ERROR during ${BASELINE_TEST} execution"
-  echo "Here is the ${glob_err} file content"
+if [[ -s ${glob_err} ]]
+then
+  echo "ERROR during ${BASELINE_TEST} execution";
+  echo "Here is the ${glob_err} file content";
  cat ${glob_err}
  cp ${glob_err} ${artifacts_path}/${glob_err}
-  status=1
-fi
-if [[ -f ${base_patch} ]]; then
+  exit 1;
+elif [[ ! -f ${base_patch} && ! -f ${base_out} ]]
+then
+  echo "Something went WRONG in ${BASELINE_TEST}:";
+  echo "Either ${base_patch} or ${base_out} should exists";
+  exit 1;
+elif [[ -f ${base_patch} ]]
+then
  echo "${BASELINE_TEST}: Differences found, patch generated"
  cp ${base_patch} ${artifacts_path}/${base_patch}
-elif [[ -f ${base_out} ]]; then
+elif [[ -f ${base_out} ]]
+then
  echo "${BASELINE_TEST}: Differences found, replacement file generated"
  cp ${base_out} ${artifacts_path}/${base_out}
 fi
+
+if [[ -f ${BASELINE_TEST}.out ]]; then
+  cp ${BASELINE_TEST}.out ${artifacts_path}
+fi
+
 # base_diff won't even exist if there is no difference.
-if [[ -f ${base_diff} ]]; then
+if [[ -f ${base_diff} ]]
+then
  echo "${BASELINE_TEST}: Relevant differences (filtered diff) ..."
  cat ${base_diff}
  cp ${base_diff} ${artifacts_path}/${base_diff}
-  status=1
+  # We create a .err file, because that's how we signal that there was a diff.
+  cp ${base_diff} ${artifacts_path}/gitlab-${BASELINE_TEST}-${MACHINE_NAME}.err
 fi
-if [[ $status -eq 0 ]]; then
+
+if [[ ! -s ${base_diff} ]]
+then
  echo "${BASELINE_TEST}: PASSED"
+  true
 else
  echo "${BASELINE_TEST}: FAILED"
+  false
 fi
-exit $status
@@ -1,41 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Try to push to the remote 5 times. If the push fails, and the local and remote
-# have diverged, then pull from the remote to merge changes, and try pushing
-# again. If some other failure happens
-for i in {1..5}; do
-   git push origin master && exit 0
-   # Wait for 20 seconds in case someone else is pushing to the remote
-   # concurrently
-   sleep 20
-   # Fetch any updates from the remote
-   git remote update
-   # Get the latest commit on the local branch
-   LOCAL=$(git rev-parse @)
-   # Get the latest commit on the remote
-   REMOTE=$(git rev-parse @{u})
-   # Get the common ancestor
-   BASE=$(git merge-base @ @{u})
-   # Have the local and remote diverged?
-   if [[ $LOCAL != $REMOTE && $LOCAL != $BASE && $REMOTE != $BASE ]]; then
-      git pull
-      if [[ $? == 0 ]]; then
-         continue
-      else
-         exit 1 # Something else went wrong trying to pull
-      fi
-   fi
-done
-
-exit 1 # Did not succeed in 5 attempts
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -11,7 +11,7 @@
 # terms of the BSD-3 license. We welcome feedback and contributions, see file
 # CONTRIBUTING.md for details.

-# There will be collision between corona and dane baselines.
+# There will be collision between corona and quartz baselines.
 # Once the corresponding files have been generated, we can switch to machine
 # specific ref.
 ARTIFACT_PATH=${CI_PROJECT_DIR}/${ARTIFACTS_DIR}/baseline-${SYS_TYPE}
@@ -21,7 +21,7 @@ PATCH_FILE=${ARTIFACT_PATH}.patch
 FULL_FILE=${ARTIFACT_PATH}.out
 DIFF_FILE=${ARTIFACT_PATH}.diff

-# There will be collision between corona and dane baselines.
+# There will be collision between corona and quartz baselines.
 # Once the corresponding files have been generated, we can switch to machine
 # specific ref.
 SAVED_NAME=baseline-${SYS_TYPE}.saved
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -32,7 +32,7 @@ if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
  git pull && \
  git add ${rundir} && \
  git commit -m "${msg}" && \
-  ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+  git push origin master
 else
  for file in ${rundir}/*; do
    echo "------------------------------"
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -29,7 +29,7 @@ if [[ "$AUTOTEST_COMMIT" != "NO" ]]; then
  git pull && \
  git add ${rundir} && \
  git commit -m "${msg}" && \
-  ${CI_PROJECT_DIR}/.gitlab/scripts/git_try_to_push
+  git push origin master
 else
  for file in ${rundir}/*; do
    echo "------------------------------"
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -8,602 +8,43 @@
                               https://mfem.org


-Version 4.8.1 (development)
+
+
+Version 4.5.1 (development)
 ===========================

-Starting with this version, MFEM requires a C++17 compiler.
-
-Discretization improvements
---------------------------
- Introduced dFEM: a new MFEM capability for Automatic Differentiation (AD) of
-  nonlinear finite element operators, based on Enzyme or dual numbers AD at
-  quadrature points. These features are part of the new mfem::future namespace
-  and some of the API can change in the future. See the new dFEM minimal surface
-  miniapp in the miniapps/dfem/ directory for illustration of dFEM's use.
-
- Using Enzyme for AD in MFEM is tested with clang v19 and requires clang/LLVM
-  built with plugin support. See INSTALL for more details.
-
- In the ParMoonolith integration, added support for variational resampling of
-  H1 vector fields.
-
- Added support for boundary integration to the hyperbolic framework. In this
-  regard, new classes `BdrHyperbolicDirichletIntegrator` and
-  `BoundaryHyperbolicFlowIntegrator` have been introduced for implementation
-  of weak Dirichlet boundary conditions with a general flux or for the linear
-  case respectively.
-
- Added method to compute piecewise linear bounds on high-order functions on
-  tensor-product elements.
-
- Parallel anisotropic refinement of hexahedral meshes is now supported,
-  provided that neighboring hexahedra are not refined in conflicting directions.
-  A new ParMesh method is added to check for such conflicts, before refinement.
-
- Renamed the default GitHub branch from "master" to "main".
-
 Meshing improvements
 --------------------
-
- Introduced NC-patch NURBS meshes, which are conforming element-wise but allow
-  for nonconforming patch topology. This new mesh format supports element
-  spacing formulas for refinement, as well as local refinement factors for a
-  subset of knot vectors.
-
- Added support for higher order meshes in Mesh::MakeSimplicial and
-  ParMesh::MakeSimplicial.
-
- Added a new miniapp for interpolating a surface grid of points in 3D using a
-  smooth NURBS surface, that can then be sampled at arbitrary resolution while
-  staying close to the original geometry. See miniapps/nurbs/nurbs_surface.
-
-GPU computing
-------------
- The function Vector::SetSubVector(const Array<int> &, const real_t) now
-  executes on device if either the vector or the array have the device flag
-  set. This is most often used for setting constant essential boundary
-  conditions. A new function Vector::SetSubVectorHost has been added in cases
-  where host execution is always needed (e.g. when the DOFs array is small).
-
- Introduced MFEM_FOREACH_THREAD_DIRECT, which directly maps loop tasks to GPU
-  threads, assigning one task per thread.
-
- Implemented a GPU-accelerated matrix-free AMR derefinement `GridFunction`
-  update operator. This supports mixed geometry meshes and variable order
-  spaces, and is the default derefinement operator constructed by
-  `FiniteElementSpace::Update` and `ParFiniteElementSpace::Update`.
-  The operator requires `FiniteElementSpace::Nonconforming() == true`.
- Added new method: GridFunction::GetGradients, with GPU support, for computing
-  the gradients of a GridFunction on all elements.
- Added GPU support in GradientGridFunctionCoefficient and
-  InnerProductCoefficient by implementing their Project methods.
-
-New and updated examples and miniapps
-------------------------------------
- Added miniapps to demonstrate an implementation of the absolute-value
-  L(1)-Jacobi preconditioners in partially assembled operators. This includes
-  Multigrid wrapper to demonstrate the effectiveness of these Jacobi-type
-  operators as smoothers.
-  These miniapps can be found in `miniapps/diag-smoothers`.
-
- Added a new miniapp (meshing/mesh-bounding-boxes) that computes the bounding
-  boxes for each element of a given mesh, and the bounds on the determinant of
-  the Jacobian of the transformation.
-
- Added a new miniapp (tools/gridfunction-bounds) to compute piecewise linear
-  bounds on a given high-order grid function.
-
- Added a new miniapp (electromagnetics/lorentz) which computes the trajectory
-  of a charged particle, subject to Lorentz forces, in electrostatic and/or
-  magnetostatic fields as computed by the volta or tesla miniapps.
-
-API changes:
-----------
- mfem::internal::tensor and mfem::internal::dual have been moved to
-  mfem::future::tensor and mfem::future::dual.
-
- API addition: in class `Operator`, added virtual functions: `AbsMult`, and
-  `AbsMultTranspose`; in class `Vector`, added `Abs` and `Pow`.
-
-Miscellaneous
-------------
- Added the "gpu", "raja-gpu", and "ceed-gpu" backend aliases/shortcuts which
-  automatically select between CUDA or HIP.
-
- The CUDA-specific names used by some of the unit tests like 'cunit_tests' and
-  'pcunit_tests' were replaced by names using 'gpu' instead of 'c' (short for
-  CUDA) or 'cuda'. These tests automatically run the CUDA/HIP tests based on the
-  MFEM build configuration.
-
- Added the option to enable GPU-aware MPI in MFEM using the environment
-  variable 'MFEM_GPU_AWARE_MPI' set to any value. Setting this environment
-  variable is an alternative to calling 'Device::SetGPUAwareMPI(true)'.
-
- Added parallel Address Sanitizer, serial and parallel Undefined Behavior
-  Sanitizer and serial Memory Sanitizer GitHub actions tests on Ubuntu.
-
- FindPointsGSLIB has a new constructor that accepts the mesh object and
-  internally calls the Setup() method so that the user does not have to.
-  The FreeData() method has also been moved to the destructor so the user does
-  not need to manually free-up the memory if the destructor is called before
-  MPI_Finalize().
-
-Version 4.8, released on Apr 9, 2025
-====================================
-
-Discretization improvements
---------------------------
- Added high-order basis functions on pyramid-shaped elements for all spaces in
-  the de Rham complex based on the paper "Orientation embedded high order shape
-  functions for the exact sequence elements of all shapes" by Fuentes, Keith,
-  Demkowicz and Nagaraj (doi.org/10.1016/j.camwa.2015.04.027). Positive basis
-  functions (Bernstein basis) for H1 and L2 on pyramids were also added.
-
- Added support for parallel p- and hp-refinement on quad/hex meshes. For hp, we
-  currently support only isotropic refinement with L2 or H1 spaces. See the new
-  miniapps hpref and phpref in the miniapps/meshing/ directory.
-
- Added several improvements for hyperbolic problems:
-  * Assembly of Jacobians in HyperbolicFormIntegrator
-  * Component-wise upwinded flux (ComponentwiseUpwindFlux)
-  * Average fluxes in NumericalFlux (formerly RiemannSolver) and FluxFunction
-
- Added convenience methods to class FiniteElementSpace to directly identify all
-  degrees of freedom on the exterior faces of the domain, without referencing
-  boundary element attributes (GetExteriorVDofs and GetExteriorTrueDofs).
-
- Altered (Par)GridFunction::Compute*Error functions to ensure they return
-  non-negative values and therefore behave as "norms".
-
- SubMesh and ParSubMesh have been extended to work on nonconforming meshes.
-  Extracting volume and exterior surface submeshes are both supported.
-
- LinearFormIntegrator, BilinearFormIntegrator and NonlinearFormIntegrator now
-  inherit from a base class Integrator that centralizes the logic for selecting
-  quadrature rules. This includes a virtual method GetDefaultIntegrationRule,
-  which should be favored over directly defining a default integration rule in
-  the element-level assembly routines. The latter is still possible, by leaving
-  the new virtual method as its default base implementation of returning NULL.
-
- Added NURBS-based H(div) and H(curl) elements in 2D and 3D. Currently only for
-  single patch meshes in serial.
-
- Refactored ALGOIM cut integration rules. The interface is unified with the
-  interface for moment based cut integration rules.
-
- FiniteElementSpace has new methods to directly set the prolongation and
-  restriction operators to user-specified sparse matrices.
-
- Added support for H(div) spaces in class QuadratureInterpolator. Currently only
-  (vector) VALUES, (vector) PHYSICAL_VALUES, and PHYSICAL_MAGNITUDES evaluations
-  are implemented.
-
- Added support for boundary constraints to class Hybridization.
-
- Added support for custom interpolation procedure in FindPointsGSLIB.
-
- Added GSLIB-based gather-scatter operator.
-
-Meshing improvements
--------------------
- Added support for nonuniform anisotropic mesh refinement on serial quad/hex
-  meshes with arbitrary spacing in each direction. This enables in particular
-  3:1 refinement, as demonstrated in the new meshing miniapp ref321.
-
- Added capabilities for optimization and adaptation of periodic meshes with
-  TMOP. The internals of TMOP were modified so that the optimization problem is
-  always solved with respect to mesh displacements.
-
- New convenience methods for manipulating boundary attribute markers in class
-  Mesh: MarkExternalBoundaries, MarkNamedBoundaries, UnmarkInternalBoundaries
-  and UnmarkNamedBoundaries. See Examples 1/1p and 11p for basic usage.
-
- Added a new method, GetExteriorFaceMarker, to the serial and parallel mesh
-  classes for identifying faces on the exterior of the mesh irrespective of
-  their presence in the list of "boundary elements".
-
- Added native AD support for computing the derivatives of numerous TMOP metrics
-  that didn't have first or second derivative implementations.
-
- Added ExodusII output capability which can handle in particular pyramid and
-  wedge element types. Mixed meshes are also supported.
-
- Added InverseElementTransformation::InitGuessType::EdgeScan as an alternative
-  initial guess type. This guess type tries solving with multiple initial guesses
-  along the r/s/t=0 edges of the element until a valid solution is found or all
-  initial guess points are exhausted.
-
- Added new convenience constructors for NURBS patches and knot vectors.
-
-GPU computing
-------------
- Extended FindPointsGSLIB to support general field interpolation on GPUs. Note
-  that this requires that switch from gslib v1.0.7 to v1.0.9.
-
- Added support for GPU-accelerated batched linear algebra (using cuBLAS,
-  hipBLAS, MAGMA, or native MFEM functionality) through the BatchedLinAlg class.
-
- A new GPU kernel dispatch mechanism was introduced. Users can instantiate
-  specialized kernels for specific combinations of (for example) polynomial
-  degree and number of quadrature points using method AddSpecialization in
-  classes DiffusionIntegrator and MassIntegrator (this functionality may be
-  added to more integrators in the future).
-
- Added BatchInverseElementTransformation to batch InverseElementTransformation
-  searches. Batch searches are currently limited to meshes with a single element
-  geometry type of SEGMENT, SQUARE, or CUBE. Additional element geometry types
-  may be added in the future. Mixed element order meshes are supported. Batch
-  searches can be performed on the CPU (serial per MPI rank) or GPU. Embedded
-  elements (SEGMENT in 2D/3D space or SQUARE in 3D space) are supported, however
-  the existing solvers may struggle to find a valid solution.
-
- Calls to slower fallback kernels can be reported to mfem::err by setting the
-  environment variable MFEM_REPORT_KERNELS to any value other than NO or by
-  explicitly calling KernelReporter::Enable. For higher performance, users can
-  then add specializations for these kernels.
-
- Element assembly kernels have been added for low-order refined -> high-order
-  transfer operators. New kernels can be offloaded as device kernels. Example
-  usage may be found in lor-transfer.cpp in the miniapps/tools/ directory.
-
- Added GPU acceleration and element assembly for DivDivIntegrator and
-  NormalTraceJumpIntegrator.
-
- Allow BlockLowerTriangularPreconditioner to run on GPU.
-
- Use device vectors in GMRES, FGMRES and other iterative methods.
-
-Linear and nonlinear solvers
----------------------------
- Added GPU acceleration of the algebraic hybridization solver for grad-div
-  problems in H(div). See Example 4.
-
- Added a self-contained implementation of the Method of Moving Asymptotes (MMA)
-  for solving optimization problems.
-
- Added support for SUNDIALS v7. See the section "API changes" for some small
-  changes related to this new version.
-
- Changed the name of class IterativeSolverMonitor to IterativeSolverController,
-  which now allows for specifying convergence by a user defined criterion. For
-  backward compatibility, the old name is still available.
-
- Refactored the ARKStepSolver class (ARKODE interface) to use the Mult() method
-  of TimeDependentOperator only when the associated ODE operator is expressed in
-  explicit form (i.e., TimeDependentOperator::isExplicit()), otherwise the
-  method ExplicitMult() is used. A check has been added to ARKStepSolver to
-  verify that the associated ODE operator is not in explicit form when a mass
-  matrix solver is enabled via a call to either the UseMFEMMassLinearSolver or
-  UseSundialsMassLinearSolver methods. This is because enabling a mass matrix
-  solver assumes that F(u,k,t) = M k in the associated ODE operator.
-
- Added ODE solvers selection routines. This creates a uniformity across
-  examples, miniapps and other executables in regard to ODE (time-integrator)
-  selection.
-
- Added new mechanism for retrieving and setting state vectors in ODE solvers.
-  This is relevant for AB/AM and gen-alpha solvers.
-
- Added ODEsolver/ODEsolver2 unit tests to verify order of convergence and
-  read/write functionality.
-
-New and updated examples and miniapps
-------------------------------------
- Added an MFEM example for the eikonal equation (examples/ex40) based on the
-  proximal Galerkin method introduced by Keith and Surowiec.
-
- Added miniapps to demonstrate the H(div) and H(curl) NURBS elements.
-
- Fixed element visualization in the Mesh explorer miniapp.
-
- Added a command line option to all miniapps (-p or --send-port) for
-  specifying the GLVis server socket port (19916 by default).
-
- Added a new toy miniapp that animates an interesting fidget spiral cone toy.
-  See miniapps/toys/spiral.cpp.
-
-Miscellaneous
-------------
- Updated the benchmarks (in tests/benchmarks) to work with the latest Google
-  Benchmarks classes (version 1.9.1). Renamed the MFEM_ENABLE_GOOGLE_BENCHMARKS
-  CMake option to just MFEM_ENABLE_BENCHMARKS.
-
- Updated the minimum CMake version requirements:
-  * CMake >= 3.12 for CPU builds,
-  * CMake >= 3.17 for CUDA builds, and
-  * CMake >= 3.14 for HIP builds (CMake >= 3.12 may work as well, not tested).
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-API changes
-----------
- In class GridFunction, fec was renamed to fec_owned.
-
- RiemannSolver was renamed to NumericalFlux (the old name has been deprecated
-  through typedef).
-
- API changes due to SUNDIALS v7:
-  * the SUNDIALS types realtype and booleantype are no longer defined by v7
-    and therefore MFEM now uses the new type names sunrealtype and
-    sunbooleantype, respectively, which MFEM defines when using SUNDIALS < v6
-    where these types were not defined.
-  * The SUNDIALS macro SUNLS_SUCCESS and some other *_SUCCESS macros were
-    removed and replaced by SUN_SUCCESS in v7, so to avoid tedious checks for
-    SUNDIALS versions, MFEM now defines and uses the constant SUN_SUCCESS when
-    using SUNDIALS < v7.
-  * The constants SUN_PREC_*, introduced by SUNDIALS v6 are now introduced by
-    MFEM when using SUNDIALS < v6 to avoid tedious version checks.
-
- TMOP_Metric_skew2D has been marked as deprecated.
-
-
-Version 4.7, released on May 7, 2024
-====================================
-
- Added support for single precision (with corresponding hypre build). The MFEM
-  floating point type was generalized from `double` to `real_t`. For details see
-  https://github.com/orgs/mfem/discussions/4207.
-
-Meshing improvements
--------------------
- Added the capability to partition (big) serial meshes in serial code, see the
-  new classes MeshPartitioner and MeshPart. This capability is also exposed as a
-  menu option in the mesh-explorer miniapp in miniapps/meshing.
-
- Added named attribute sets and basic supporting methods to the Mesh class as a
-  convenient means of referring to sets of domain or boundary attribute numbers.
-  See the new Example 39/39p and data/compass.mesh.
-
- Introduced formulas for refinement of patches in NURBS meshes. Refinement by
-  arbitrary integer factors is also enabled, e.g. in the mesh-explorer miniapp.
-  NURBS coarsening and knot removal are also introduced.
-
- Added support for internal boundary elements in nonconforming meshes.
-
- The ReadCubit Genesis mesh importer has been rewritten to improve readability.
-
-Discretization improvements
---------------------------
- Added a new nonlinear integrator, `HyperbolicFormIntegrator` that implements
-  both element-wise weak divergence and face-wise numerical flux for a general
-  system of hyperbolic conservation laws. To use the integrator for a specific
-  flux function, users can define a derived class of `FluxFunction`. Currently,
-  advection, Burgers, shallow-water and Euler equations (see Example 18/18p) are
-  available.
-
- Added a capability to construct cut-surface and cut-volume IntegrationRules
-  through a moment-fitting approach. The cut is specified by the zero level set
-  of a Coefficient. See fem/intrules_cut.hpp and the new Example 38.
-
- Introduced support for high-order nonconforming Nedelec elements on simplices.
-
-GPU computing
-------------
- Added partial assembly and GPU support for the DG diffusion integrator.
-
- Efficient GPU-accelerated LOR assembly is now supported on surface meshes.
-
- Added functionality to automatically configure hypre's compute policy to match
-  MFEM's compute policy when hypre is built with GPU support. Requires version
-  hypre-2.31.0 or later.
-
- Added support for full assembly on simplices.
-
- Added partial assembly for linear elasticity (no sum factorization for now).
-
- Added functionality for BilinearFormIntegrators to use kernels that work for
-  both tensor and unstructured elements.
-
- The RAJA backend will use `seq_exec` for serial loop execution when RAJA
-  v2023.06.00 and beyond is detected as `loop_exec` is deprecated.
-
- API change: The macro MFEM_HYPRE_FORALL (from hypre.hpp) which was intended
-  for internal use, has been removed and replaced by the function template
-  mfem::hypre_forall in general/forall.hpp.
-
-New and updated examples and miniapps
-------------------------------------
- Added a new miniapp illustrating elastic contact based on the Tribol library,
-  (https://github.com/LLNL/Tribol). See miniapps/tribol.
-
- Added a miniapp to demonstrate low order refined (LOR) block preconditioning
-  for linear elasticity on GPUs. See miniapps/solvers/lor_elast.
-
- Added a new block solver in miniapp/solvers for the Darcy problem. The new
-  solver is based on a Bramble-Pasciak preconditioning. User can use and
-  implement their own preconditioner for the mass matrix.
-
- Added a small miniapp for printing the shape functions of a KnotVector. See
-  miniapps/nurbs/nurbs_printfunc.cpp.
-
- Added two new example codes: 38 and 39/39p described above. Substantially
-  updated Example 18/18p.
-
-Miscellaneous
-------------
- Updated the Doxygen documentation style, which now requires Doxygen version
-  1.9.8 or later. See the doc/ directory.
-
- Improved thread safety for global variables in the library, e.g. for IntRules,
-  RefinedIntRules, GlobGeometryRefiner, and FiniteElement::dof2quad_array.
-
- PETSc integration now generally requires PETSc version 3.21 or later, though
-  depending on the functionality older versions may still work.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-
-Version 4.6, released on September 27, 2023
-===========================================
-
- MFEM is now available in Homebrew and can be installed on a Mac with just
-  "brew install mfem". See https://formulae.brew.sh/formula/mfem.
-
-Meshing improvements
--------------------
- Added asymptotically-balanced TMOP compound metrics 90, 94, 328, 338. A new
-  tool, tmop-metric-magnitude, can be used to track how metrics change under
-  geometric perturbations. See miniapps/tools.
-
- Several NURBS meshing improvements:
-  * Support for free connectivity of NURBS patches allowing for more complex
-    patch configurations such as C-meshes.
-  * New methods to set and get attributes on NURBS patches and patch boundaries.
-  * The edge to knot map for NURBS meshes can be determined automatically. It is
-    no longer needed to specify this in the NURBS mesh.
-  * Added curve interpolation method for NURBS.
-  * See miniapps/nurbs for example meshes and miniapps.
-
-Discretization improvements
---------------------------
- SubMesh and ParSubMesh have been extended to support the transfer of
-  Nedelec and Raviart-Thomas finite element spaces.
-
- Added support for partial assembly on NURBS patches, and NURBS-patch sparse
-  matrix assembly. Patch matrix assembly includes the option to use reduced
-  approximate integration rules, computed by the newly implemented non-negative
-  least-squares (NNLS) solver.
-
- Support for parallel transfer of H1 fields using the low-order refined (LOR)
-  transfer operators in L2ProjectionGridTransfer
-
- Added KDTree class for 2D/3D set of points, which is then utilized in the new
-  KDTreeNodalProjection class to project a function defined on an arbitrary set
-  of points onto an MFEM grid function. This functionality is demonstrated in
-  the nodal-transfer miniapp. The current implementation is serial only. Further
-  extensions can include search in arbitrary dimensional spaces.
-
- Added support for p-refined meshes in GSLIB-FindPoints.
-
- Device kernels can now access device-specific DOF and quadrature limits using
-  the DofQuadLimits structure, allowing increased limits when executing on CPU.
-  The limits for the runtime selected device can be accessed in host code using
-  DeviceDofQuadLimits::Get(). The global constants MAX_D1D and MAX_Q1D are no
-  longer available.
-
- Face restriction operators for Nedelec and Raviart-Thomas finite element
-  spaces are now supported through the ConformingFaceRestriction class.
-
- VectorFEBoundaryFluxLFIntegrator is now supported on device/GPU.
-
-Linear and nonlinear solvers
----------------------------
- Updated the MUMPS interface to support multiple right-hand sides, block
-  low-rank compression, builds using 64-bit integers, and other improvements.
-
- Added an interface to the MKL Pardiso sparse direct solver developed by Intel.
-  The interface provides a serial (OpenMP shared memory) version of Pardiso for
-  use with SparseMatrix. This complements the existing parallel (MPI distributed
-  memory) version already available through the CPardiso MFEM integration.
-
- Added HIP support to the PETSc and SUNDIALS interfaces.
-
-New and updated examples and miniapps
-------------------------------------
- Added a new H(div) solver miniapp demonstrating the use of a matrix-free
-  saddle-point solver methodology, suitable for high-order discretizations and
-  for GPU acceleration. Examples illustrating the solution of Darcy and grad-div
-  problems are included. See miniapps/hdiv-linear-solver.
-
- Added new Discontinuous Petrov-Galerkin (DPG) miniapp which includes serial
-  and parallel examples for diffusion, convection-diffusion, acoustics and
-  Maxwell equations. The miniapp includes new classes such as (Par)DPGWeakForm,
-  (Par)ComplexDPGWeakForm and (Complex)BlockStaticCondensation. Three new
-  integrators are added in support of DPG systems: TraceIntegrator,
-  NormalTraceIntegrator and TangentTraceIntegrator. See miniapps/dpg.
-
- Added a new miniapp that implements the SPDE method for generating Gaussian
-  random fields of Matern covariance. The resulting random field can be used,
-  e.g., to model material uncertainties. See miniapps/spde.
-
- Added a new parallel LOR transfer miniapp, plor-transfer, which mirrors the
-  functionality of the serial LOR transfer miniapp. See miniapps/tools.
-
- New serial miniapp, nodal-transfer, demonstrating the use of KDTree to map a
-  parallel grid function to a different parallel partitioning of the same mesh.
-
- Added 3 additional TMOP miniapps in miniapps/meshing:
-  * Mesh-Quality evaluates quality using size, skewness, and aspect-ratio
-    computed from the Jacobian of the transformation.
-  * Mesh-Fitting can be used for interface and boundary fitting to implicit
-    domains defined using level-set functions.
-  * Fit-Node-Position fits selected mesh nodes to specified positions, while
-    maintaining overall mesh quality.
-
- Added 4 new example codes:
-  * Example 34/34p solves a simple magnetostatic problem where source terms and
-    boundary conditions are transferred with SubMesh objects.
-  * Example 35p implements H1, H(curl) and H(div) variants of a damped harmonic
-    oscillator with field transfer using SubMesh objects.
-  * Example 36/36p demonstrates the solution of the obstacle problem with a new
-    finite element method (proximal Galerkin).
-  * Example 37/37p demonstrates topology optimization with MFEM.
-
- Added a random refinement option to the mesh-explorer miniapp to assist users
-  in experimenting with nonconforming meshes.
-
- Moved the distance solver methods from miniapps/shifted to miniapps/common.
-
-Miscellaneous
-------------
- Improved lambda body debugging with the addition of mfem::forall functions.
-  These functions can take the place of the MFEM_FORALL macros, which have been
-  preserved for backwards compatibility.
-
- Added an address sanitizer GitHub action for a serial build/test on Ubuntu,
-  based on Clang/LLVM (https://clang.llvm.org/docs/AddressSanitizer.html).
-
- Reorganized files for bilinear form, linear form, and nonlinear form integrators
-  in the fem/integ/ subdirectory.
-
- FiniteElementSpace::GetFE has been updated to abort instead of returning NULL for
-  an empty partition.
-
- Various other simplifications, extensions, and bugfixes in the code.
-
-
-Version 4.5.2, released on March 23, 2023
-=========================================
-
 - Added support for pyramids in non-conforming meshes. Currently only isotropic
  refinement is supported in this case.

- Removed the support for the Mesquite toolkit. We recommend using MFEM's TMOP
-  functionality instead for mesh optimization. See the mesh-optimizer miniapp.
+Discretization improvements
+---------------------------
+- TBD

+Linear and nonlinear solvers
+----------------------------
 - Added a fast normalization-based distance solver, see the Distance miniapp
  in the miniapps/shifted/ directory.

- Added a new meshing miniapp, Reflector, which reflects a high-order or NURBS
-  hexahedral mesh about a plane.
+New and updated examples and miniapps
+-------------------------------------
+- TBD

- Updated logic in FindPointsGSLIB to ignore points found near (but outside) the
-  domain boundary.
+Integrations, testing and documentation
+---------------------------------------
+- Removed the support for the Mesquite toolkit. We recommend using MFEM's TMOP
+  functionality instead for mesh optimization. See the mesh-optimizer miniapp.

- Added an option to auto-balance compound TMOP metrics.
-
- Fixed a bug in TMOP metric 301.
-
- When using discontinuous (L2) spaces, use local (element-wise) L2 projection
-  as the coarsening operator for non-conforming AMR meshes.
-
- Added support for GridFunction::GetGradients() and GetVectorGradient() on
-  face-neighbor elements.
-
- Added support for pyramids in Gmsh meshes.
-
- The Mesh Explorer miniapp can now save mesh files in the VisIt or ParaView
-  formats using the corresponding DataCollection. See option 'D' in the menu.
-
- VisItDataCollection now correctly handles data collection names containing
+Miscellaneous
+-------------
+- VisItDataCollection now correctly handles collection names containing
  underscores.

- Added support for shared Windows builds with MSVC through CMake.
-  Developers note: this enhancement is facilitated by the addition of the macro
-  MFEM_EXPORT, see config.hpp for more details on its usage.
-
- The following integrations have updated minimum version requirements:
-  * RAJA >= 2022.10.3
+- VisItDataCollection::SetPadDigits() no longer alters the number of digits
+  used to represent the MPI rank because VisIt seems to require 6 digits.
+  This parameter can still be explicitly overridden with
+  VisItDataCollection::SetPadDigitsRank().

 API changes
 -----------
@@ -611,14 +52,6 @@ API changes
  have been deprecated and generate deprecation warnings if used. They will be
  removed in a future release.

- The methods Mesh::GetFaceBaseGeometry and Mesh::GetFaceGeometryType have been
-  deprecated, and Mesh::GetFaceGeometry (which provides identical functionality)
-  should be used instead.
-
- VisItDataCollection::SetPadDigits() no longer alters the number of digits
-  used to represent the MPI rank because VisIt seems to require 6 digits.
-  This parameter can still be explicitly overridden with SetPadDigitsRank().
-

 Version 4.5, released on October 22, 2022
 =========================================
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -12,26 +12,20 @@
 # The variable CMAKE_CXX_STANDARD and related were introduced in CMake v3.1
 # Version 3.8 fixes the handling of CMAKE_CXX_STANDARD for try_compile.
 # Version 3.8 or newer is required for direct CUDA support.
-# Version 3.12 or newer is required for setting maximum policy version.
-cmake_minimum_required(VERSION 3.12.0...4.0.0)
-message(STATUS "CMake version: ${CMAKE_VERSION}")
+cmake_minimum_required(VERSION 3.8)
 set(USER_CONFIG "${CMAKE_CURRENT_SOURCE_DIR}/config/user.cmake" CACHE PATH
  "Path to optional user configuration file.")

-# Require C++17 and disable compiler-specific extensions
-set(CMAKE_CXX_STANDARD 17 CACHE STRING "C++ standard to use.")
-set(CMAKE_CXX_STANDARD_REQUIRED ON CACHE BOOL
-  "Force the use of the chosen C++ standard.")
-set(CMAKE_CXX_EXTENSIONS OFF CACHE BOOL "Enable C++ standard extensions.")
+# Require C++11 and disable compiler-specific extensions
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+set(CMAKE_CXX_EXTENSIONS OFF)

 # Load user settings before the defaults - this way the defaults will not
 # overwrite the user set options. If the user has not set all options, we still
 # have the defaults.
-include("${USER_CONFIG}" OPTIONAL RESULT_VARIABLE USER_CONFIG_LOADED)
-if (USER_CONFIG_LOADED)
-  set(USER_CONFIG_LOADED "LOADED")
-endif()
-message(STATUS "Loading USER_CONFIG = ${USER_CONFIG} (${USER_CONFIG_LOADED})")
+message(STATUS "(optional) USER_CONFIG = ${USER_CONFIG}")
+include("${USER_CONFIG}" OPTIONAL)
 include("${CMAKE_CURRENT_SOURCE_DIR}/config/defaults.cmake")

 # Allow overwriting of the compiler by setting CXX/MPICXX on the command line or
@@ -59,7 +53,7 @@ project(mfem NONE)
 # Current version of MFEM, see also `makefile`.
 #   mfem_VERSION = (string)
 #   MFEM_VERSION = (int)   [automatically derived from mfem_VERSION]
-set(${PROJECT_NAME}_VERSION 4.8.1)
+set(${PROJECT_NAME}_VERSION 4.5.1)

 # Prohibit in-source build
 if (${PROJECT_SOURCE_DIR} STREQUAL ${PROJECT_BINARY_DIR})
@@ -84,55 +78,42 @@ if (MFEM_USE_CONDUIT OR
   #  * find_package(PETSc REQUIRED)
   set(XSDK_ENABLE_C ON)
 endif()
-if (MFEM_USE_STRUMPACK OR MFEM_USE_MUMPS)
+if (MFEM_USE_STRUMPACK)
  # Just needed to find the MPI_Fortran libraries to link with
  set(XSDK_ENABLE_Fortran ON)
 endif()
-# Ginkgo requires C++17:
-if ((MFEM_USE_GINKGO) AND ("${CMAKE_CXX_STANDARD}" LESS "17"))
-  set(CMAKE_CXX_STANDARD 17 CACHE STRING "C++ standard to use." FORCE)
-# Google Benchmark, SUNDIALS, STRUMPACK, Tribol, RAJA and Umpire require C++14:
-elseif ((MFEM_USE_BENCHMARK OR
-         MFEM_USE_SUNDIALS OR
-         MFEM_USE_STRUMPACK OR
-         MFEM_USE_TRIBOL OR
-         MFEM_USE_RAJA OR
-         MFEM_USE_UMPIRE) AND
+# SUNDIALS, STRUMPACK, and Ginkgo require C++14:
+if ((MFEM_USE_SUNDIALS OR MFEM_USE_STRUMPACK OR MFEM_USE_GINKGO) AND
    ("${CMAKE_CXX_STANDARD}" LESS "14"))
-  set(CMAKE_CXX_STANDARD 14 CACHE STRING "C++ standard to use." FORCE)
+  set(CMAKE_CXX_STANDARD 14)
 endif()

 # Include xSDK default CMake file.
 include("${CMAKE_CURRENT_SOURCE_DIR}/config/XSDKDefaults.cmake")

-# Path to MFEM's CMake modules and utilities.
-set(MFEM_CMAKE_PATH ${PROJECT_SOURCE_DIR}/config)
-set(CMAKE_MODULE_PATH ${MFEM_CMAKE_PATH}/cmake/modules)
-
-# Load MFEM CMake utilities.
-include(MfemCmakeUtilities)
-
 # Enable languages.
 enable_language(CXX)
 if (MINGW)
   # MinGW GCC does not expose the functions jn/_jn, yn/_yn (used in Example
   # 25/25p) unless we use '-std=gnu++11':
-   set(CMAKE_CXX_EXTENSIONS ON
-      CACHE BOOL "Enable C++ standard extensions." FORCE)
+   set(CMAKE_CXX_EXTENSIONS ON)
 endif()
 if (MFEM_USE_CUDA)
   if (MFEM_USE_HIP)
      message(FATAL_ERROR " *** MFEM_USE_HIP cannot be combined with MFEM_USE_CUDA.")
   endif()
-   # CUDAToolkit was added in CMake 3.17, so we require at least CMake 3.17 when
-   # CUDA is enabled:
-   if (CMAKE_VERSION VERSION_LESS 3.17.0)
-      message(FATAL_ERROR "CUDA support requires CMake >= 3.17")
-   endif()
   # Use ${CMAKE_CXX_COMPILER} as the cuda host compiler.
   if (NOT CMAKE_CUDA_HOST_COMPILER)
      set(CMAKE_CUDA_HOST_COMPILER ${CMAKE_CXX_COMPILER})
   endif()
+   enable_language(CUDA)
+   set(CMAKE_CUDA_STANDARD 11)
+   if (MFEM_USE_GINKGO)
+     set(CMAKE_CUDA_STANDARD 14)
+   endif()
+   set(CMAKE_CUDA_STANDARD_REQUIRED ON)
+   set(CMAKE_CUDA_EXTENSIONS OFF)
+   set(CUDA_FLAGS "--expt-extended-lambda")
   if (CMAKE_VERSION VERSION_LESS 3.18.0)
      set(CUDA_FLAGS "-arch=${CUDA_ARCH} ${CUDA_FLAGS}")
   elseif (NOT CMAKE_CUDA_ARCHITECTURES)
@@ -146,33 +127,18 @@ if (MFEM_USE_CUDA)
      set(CUDA_ARCH "CMAKE_CUDA_ARCHITECTURES: ${CMAKE_CUDA_ARCHITECTURES}")
   endif()
   message(STATUS "Using CUDA architecture: ${CUDA_ARCH}")
-   enable_language(CUDA)
-   if (CMAKE_VERSION VERSION_LESS 3.18.0)
-     # backup try to detect if this is clang or nvcc
-     if(CMAKE_CUDA_COMPILER MATCHES "nvcc$")
-       # nvcc
-       set(MFEM_CUDA_COMPILER_IS_NVCC ON)
-       set(CUDA_FLAGS "${CUDA_FLAGS} --expt-extended-lambda --expt-relaxed-constexpr")
-     endif()
-   else()
-     if (CMAKE_CUDA_COMPILER_ID STREQUAL "NVIDIA")
-       # nvcc
-       set(MFEM_CUDA_COMPILER_IS_NVCC ON)
-       set(CUDA_FLAGS "${CUDA_FLAGS} --expt-extended-lambda --expt-relaxed-constexpr")
-     endif()
+   if (CMAKE_VERSION VERSION_LESS 3.12.0)
+      # CMake versions 3.8 and 3.9 require this to work; 3.10 and 3.11 are not
+      # tested and may not actually need this (but should be ok to keep).
+      set(CUDA_FLAGS "-ccbin=${CMAKE_CXX_COMPILER} ${CUDA_FLAGS}")
+      set(CMAKE_CUDA_HOST_LINK_LAUNCHER ${CMAKE_CXX_COMPILER})
   endif()
-   set(CMAKE_CUDA_STANDARD ${CMAKE_CXX_STANDARD} CACHE STRING
-      "CUDA standard to use.")
-   set(CMAKE_CUDA_STANDARD_REQUIRED ON CACHE BOOL
-      "Force the use of the chosen CUDA standard.")
-   set(CMAKE_CUDA_EXTENSIONS OFF CACHE BOOL "Enable CUDA standard extensions.")
-   set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} ${CUDA_FLAGS}")
-   find_package(CUDAToolkit REQUIRED)
+   set(CMAKE_CUDA_FLAGS "${CUDA_FLAGS}" CACHE STRING
+       "CUDA flags set for MFEM" FORCE)
   set(CUSPARSE_FOUND TRUE)
+   set(CUSPARSE_LIBRARIES "cusparse")
   set(CUBLAS_FOUND TRUE)
-   # Initialize CUSPARSE_LIBRARIES and CUBLAS_LIBRARIES:
-   mfem_culib_set_libraries(CUSPARSE cusparse)
-   mfem_culib_set_libraries(CUBLAS cublas)
+   set(CUBLAS_LIBRARIES "cublas")
 endif()

 if (XSDK_ENABLE_C)
@@ -185,6 +151,13 @@ endif()
 # Suppress warnings about MACOSX_RPATH
 set(CMAKE_MACOSX_RPATH OFF CACHE BOOL "")

+# CMake needs to know where to find things
+set(MFEM_CMAKE_PATH ${PROJECT_SOURCE_DIR}/config)
+set(CMAKE_MODULE_PATH ${MFEM_CMAKE_PATH}/cmake/modules)
+
+# Load MFEM CMake utilities.
+include(MfemCmakeUtilities)
+
 string(TOUPPER "${PROJECT_NAME}" PROJECT_NAME_UC)
 mfem_version_to_int(${${PROJECT_NAME}_VERSION} ${PROJECT_NAME_UC}_VERSION)
 set(${PROJECT_NAME_UC}_VERSION_STRING ${${PROJECT_NAME}_VERSION})
@@ -203,19 +176,6 @@ endif()
 # Process configuration options
 #-------------------------------------------------------------------------------

-# MFEM_PRECISION -> MFEM_USE_SINGLE, MFEM_USE_DOUBLE
-if (MFEM_PRECISION MATCHES "^(double|Double|DOUBLE)$")
-  set(MFEM_USE_SINGLE OFF)
-  set(MFEM_USE_DOUBLE ON)
-elseif (MFEM_PRECISION MATCHES "^(single|Single|SINGLE)$")
-  set(MFEM_USE_SINGLE ON)
-  set(MFEM_USE_DOUBLE OFF)
-else()
-  message(FATAL_ERROR " *** Invalid floating-point precision: "
-    "MFEM_PRECISION = ${MFEM_PRECISION}")
-endif()
-message(STATUS "Floating-point precision: MFEM_PRECISION = ${MFEM_PRECISION}")
-
 # MFEM_DEBUG
 if (CMAKE_BUILD_TYPE MATCHES "Debug|debug|DEBUG")
  set(MFEM_DEBUG ON)
@@ -223,23 +183,6 @@ else()
  set(MFEM_DEBUG OFF)
 endif()

-# Shared build on Windows
-if (WIN32 AND BUILD_SHARED_LIBS)
-  # CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS works only with MSVC?
-  set(CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS ON CACHE BOOL
-      "Automatically export symbols for shared Windows DLL build")
-  # Place all .dll and .exe files in the same sub-directory, 'bin/<config>', of
-  # the build directory, so that the .exe files can find the .dll files at
-  # runtime:
-  set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin")
-  # Note: CMake tests are run from the build-tree sub-directory where the test
-  # is defined, e.g. <build-dir>/tests/unit, so hard coded paths to meshes still
-  # work fine.
-  # Not strictly necessary:
-  # set(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib")
-  # set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib")
-endif()
-
 # AMD HIP
 if (MFEM_USE_HIP)
  if (HIP_ARCH)
@@ -250,7 +193,6 @@ if (MFEM_USE_HIP)
    list(INSERT CMAKE_PREFIX_PATH 0 ${ROCM_PATH})
  endif()
  find_package(HIP REQUIRED)
-  find_package(HIPBLAS REQUIRED)
  find_package(HIPSPARSE REQUIRED)
 endif()

@@ -269,20 +211,11 @@ if (MFEM_USE_OPENMP OR MFEM_USE_LEGACY_OPENMP)
  if (OPENMP_FOUND)
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_CXX_FLAGS}")
    if (MFEM_USE_CUDA)
-      if(MFEM_CUDA_COMPILER_IS_NVCC)
-        set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} -Xcompiler=${OpenMP_CXX_FLAGS}")
-      else()
-        set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} ${OpenMP_CXX_FLAGS}")
-      endif()
+      set(CMAKE_CUDA_FLAGS "${CMAKE_CUDA_FLAGS} -Xcompiler=${OpenMP_CXX_FLAGS}")
    endif()
  endif()
 endif()

-# Umpire (must be included before hypre, so hypre can use it if needed)
-if (MFEM_USE_UMPIRE)
-   find_package(UMPIRE REQUIRED)
-endif()
-
 # MPI -> hypre; PETSc (optional)
 if (MFEM_USE_MPI)
  find_package(MPI REQUIRED)
@@ -363,13 +296,7 @@ if (MFEM_USE_SUNDIALS)
  if (MFEM_USE_CUDA)
    list(APPEND SUNDIALS_COMPONENTS NVector_Cuda)
  endif()
-  if (MFEM_USE_HIP)
-    list(APPEND SUNDIALS_COMPONENTS NVector_Hip)
-  endif()
-  # The Core component was added in SUNDIALS v7, so we treat it as optional in
-  # order to support older versions.
-  find_package(SUNDIALS REQUIRED ${SUNDIALS_COMPONENTS}
-    OPTIONAL_COMPONENTS Core)
+  find_package(SUNDIALS REQUIRED ${SUNDIALS_COMPONENTS})
 endif()

 # SuperLU_DIST can only be enabled in parallel
@@ -385,7 +312,6 @@ endif()
 if (MFEM_USE_MUMPS)
  if (MFEM_USE_MPI)
    find_package(MUMPS REQUIRED mumps_common pord)
-    set(MFEM_MUMPS_VERSION ${MUMPS_VERSION})
  else()
    message(FATAL_ERROR " *** MUMPS requires that MPI be enabled.")
  endif()
@@ -410,11 +336,6 @@ if (MFEM_USE_GSLIB)
  find_package(GSLIB REQUIRED)
 endif()

-# HDF5
-if (MFEM_USE_HDF5)
-  find_package(HDF5 REQUIRED)
-endif()
-
 # NetCDF
 if (MFEM_USE_NETCDF)
  find_package(NetCDF REQUIRED)
@@ -433,10 +354,6 @@ if (MFEM_USE_AMGX)
  find_package(AMGX REQUIRED)
 endif()

-if (MFEM_USE_MAGMA)
-  find_package(MAGMA REQUIRED)
-endif()
-
 if (MFEM_USE_CONDUIT)
    find_package(Conduit REQUIRED conduit relay blueprint)
 endif()
@@ -500,13 +417,14 @@ endif()

 # RAJA
 if (MFEM_USE_RAJA)
-   # RAJA uses FindCUDA, which needs CMP0146=OLD in CMake >= 3.27
-   if(CMAKE_VERSION VERSION_GREATER_EQUAL 3.27.0)
-      cmake_policy(SET CMP0146 OLD)
-   endif()
   find_package(RAJA REQUIRED)
 endif()

+# UMPIRE
+if (MFEM_USE_UMPIRE)
+   find_package(UMPIRE REQUIRED)
+endif()
+
 # GOOGLE-BENCHMARK
 if (MFEM_USE_BENCHMARK)
   find_package(Benchmark REQUIRED)
@@ -527,36 +445,20 @@ if (MFEM_USE_ADIOS2)
   find_package(ADIOS2 REQUIRED)
 endif()

-# MKL CPardiso
 if (MFEM_USE_MKL_CPARDISO)
  if (MFEM_USE_MPI)
   find_package(MKL_CPARDISO REQUIRED MKL_SEQUENTIAL MKL_LP64 MKL_MPI_WRAPPER)
  endif()
 endif()

-# MKL Pardiso
-if (MFEM_USE_MKL_PARDISO)
-   find_package(MKL_PARDISO REQUIRED MKL_SEQUENTIAL MKL_LP64)
-endif()
-
 # PARELAG
 if (MFEM_USE_PARELAG)
   find_package(PARELAG REQUIRED)
 endif()

-# Tribol
-if (MFEM_USE_TRIBOL)
-  if (MFEM_USE_MPI)
-    find_package(Tribol REQUIRED tribol redecomp)
-  else()
-    message(FATAL_ERROR " *** Tribol requires that MPI be enabled.")
-  endif()
-endif()
-
+# Enzyme
 if (MFEM_USE_ENZYME)
-    find_package(Enzyme REQUIRED HINTS ${ENZYME_DIR})
-    message(STATUS "Enzyme found in ${ENZYME_DIR}.")
-    set(ENZYME_INCLUDE_DIRS ${ENZYME_DIR}/include)
+   find_package(ENZYME REQUIRED)
 endif()

 # MFEM_TIMER_TYPE
@@ -596,36 +498,27 @@ find_package(Threads REQUIRED)
 #    integers, the METIS header (with 32-bit indices, as used by mfem) needs to
 #    be before SuiteSparse.
 set(MFEM_TPLS OPENMP HYPRE LAPACK BLAS SuperLUDist STRUMPACK METIS SuiteSparse
-    SUNDIALS PETSC SLEPC MUMPS AXOM FMS CONDUIT Ginkgo GNUTLS GSLIB HDF5
+    SUNDIALS PETSC SLEPC MUMPS AXOM FMS CONDUIT Ginkgo GNUTLS GSLIB
    NETCDF MPFR PUMI HIOP POSIXCLOCKS MFEMBacktrace ZLIB OCCA CEED RAJA UMPIRE
-    ADIOS2 MKL_CPARDISO MKL_PARDISO AMGX MAGMA CUSPARSE CUBLAS CALIPER CODIPACK
-    BENCHMARK PARELAG TRIBOL MPI_CXX HIP HIPBLAS HIPSPARSE MOONOLITH BLITZ
-    ALGOIM ENZYME CUDA::cudart)
+    ADIOS2 CUBLAS CUSPARSE MKL_CPARDISO AMGX CALIPER CODIPACK BENCHMARK PARELAG
+    MPI_CXX HIP HIPSPARSE MOONOLITH BLITZ ALGOIM ENZYME)

-# Add all created targets and *_FOUND libraries in the variables TPL_TARGETS and
-# TPL_LIBRARIES, respectively.
-set(TPL_TARGETS)
+# Add all *_FOUND libraries in the variable TPL_LIBRARIES.
 set(TPL_LIBRARIES "")
 set(TPL_INCLUDE_DIRS "")
 foreach(TPL IN LISTS MFEM_TPLS)
-  if (${TPL}_FOUND OR TARGET ${TPL})
+  if (${TPL}_FOUND)
    message(STATUS "MFEM: using package ${TPL}")
-    if (TARGET ${TPL})
-      list(APPEND TPL_TARGETS ${TPL})
-    else()
-      list(APPEND TPL_LIBRARIES ${${TPL}_LIBRARIES})
-      list(APPEND TPL_INCLUDE_DIRS ${${TPL}_INCLUDE_DIRS})
-    endif()
+    list(APPEND TPL_LIBRARIES ${${TPL}_LIBRARIES})
+    list(APPEND TPL_INCLUDE_DIRS ${${TPL}_INCLUDE_DIRS})
  endif()
 endforeach(TPL)
-
 list(REVERSE TPL_LIBRARIES)
 list(REMOVE_DUPLICATES TPL_LIBRARIES)
 list(REVERSE TPL_LIBRARIES)
 list(REMOVE_DUPLICATES TPL_INCLUDE_DIRS)
 # message(STATUS "TPL_INCLUDE_DIRS = ${TPL_INCLUDE_DIRS}")

-message(STATUS "MFEM shared library: BUILD_SHARED_LIBS = ${BUILD_SHARED_LIBS}")
 message(STATUS "MFEM build type: CMAKE_BUILD_TYPE = ${CMAKE_BUILD_TYPE}")
 message(STATUS "MFEM version: v${MFEM_VERSION_STRING}")
 message(STATUS "MFEM git string: ${MFEM_GIT_STRING}")
@@ -652,49 +545,24 @@ if (MFEM_USE_CUDA)
 endif()

 add_subdirectory(config)
-set(MAIN_HEADERS
+set(MASTER_HEADERS
  ${PROJECT_SOURCE_DIR}/mfem.hpp
  ${PROJECT_SOURCE_DIR}/mfem-performance.hpp)

-# Installation options (we use GNUInstallDirs but prefer lib by default)
-set(MFEM_USE_GNUINSTALLDIRS OFF CACHE BOOL
-  "Use CMAKE_INSTALL_LIBDIR as defined by the GNUInstallDirs CMake module.")
-if (NOT MFEM_USE_GNUINSTALLDIRS)
-  mfem_cache_path(CMAKE_INSTALL_LIBDIR "lib" "Object code libraries (lib)")
-endif()
-include(GNUInstallDirs)
-mfem_cache_path(INSTALL_INCLUDE_DIR "${CMAKE_INSTALL_INCLUDEDIR}"
-  "Relative or absolute path for installing header files.")
-mfem_cache_path(INSTALL_BIN_DIR "${CMAKE_INSTALL_BINDIR}"
-  "Relative or absolute path for installing the binaries.")
-mfem_cache_path(INSTALL_LIB_DIR "${CMAKE_INSTALL_LIBDIR}"
-  "Relative or absolute path for installing the library.")
-mfem_cache_path(INSTALL_SHARE_DIR "${CMAKE_INSTALL_DATAROOTDIR}"
-  "Relative or absolute path for installing shared data.")
-# other options: "share/mfem/cmake", "lib/mfem/cmake"
-mfem_cache_path(INSTALL_CMAKE_DIR "${INSTALL_LIB_DIR}/cmake/mfem"
-  "Relative or absolute path for installing cmake config files.")
-
-mfem_path_to_fullpath("${INSTALL_LIB_DIR}" "${CMAKE_INSTALL_PREFIX}" _lib_path)
+set(_lib_path "${CMAKE_INSTALL_PREFIX}/lib")
 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH ON CACHE BOOL "")
-if(NOT DEFINED CMAKE_INSTALL_RPATH)
-  set(CMAKE_INSTALL_RPATH "${_lib_path}")
-endif()
-if(NOT DEFINED CMAKE_INSTALL_NAME_DIR)
-  set(CMAKE_INSTALL_NAME_DIR "${_lib_path}")
-endif()
+set(CMAKE_INSTALL_RPATH "${_lib_path}" CACHE PATH "")
+set(CMAKE_INSTALL_NAME_DIR "${_lib_path}" CACHE PATH "")

-# Variables used when generating _config.hpp, and config.mk
-set(MFEM_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR})
-set(MFEM_INSTALL_DIR ${CMAKE_INSTALL_PREFIX})
+set(MFEM_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR} CACHE PATH
+    "The MFEM source directory" FORCE)
+set(MFEM_INSTALL_DIR ${CMAKE_INSTALL_PREFIX} CACHE PATH
+    "The MFEM install directory" FORCE)

 # Declaring the library
-mfem_add_library(mfem ${SOURCES} ${HEADERS} ${MAIN_HEADERS})
+mfem_add_library(mfem ${SOURCES} ${HEADERS} ${MASTER_HEADERS})
 # message(STATUS "TPL_LIBRARIES = ${TPL_LIBRARIES}")
-target_link_libraries(mfem PUBLIC ${TPL_LIBRARIES} ${TPL_TARGETS})
-if (TPL_TARGETS)
-  add_dependencies(mfem ${TPL_TARGETS})
-endif()
+target_link_libraries(mfem PUBLIC ${TPL_LIBRARIES})
 if (MINGW)
  target_link_libraries(mfem PRIVATE ws2_32)
 endif()
@@ -706,22 +574,7 @@ target_include_directories(mfem
  PUBLIC
    $<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}>
    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
-    # The INSTALL_INTERFACE is handled below
    ${TPL_INCLUDE_DIRS})
-if (MFEM_USE_MPI)
-  if (MPI_CXX_COMPILE_FLAGS)
-    separate_arguments(MPI_CXX_COMPILE_ARGS UNIX_COMMAND
-      "${MPI_CXX_COMPILE_FLAGS}")
-    target_compile_options(mfem PUBLIC ${MPI_CXX_COMPILE_ARGS})
-  endif()
-  if (MPI_CXX_LINK_FLAGS)
-    target_link_libraries(mfem PUBLIC ${MPI_CXX_LINK_FLAGS})
-  endif()
-endif()
-if (MFEM_USE_ENZYME)
-  target_link_libraries(mfem PUBLIC ClangEnzymeFlags)
-endif()
-
 set_target_properties(mfem PROPERTIES VERSION "${mfem_VERSION}")
 set_target_properties(mfem PROPERTIES SOVERSION "${mfem_VERSION}")

@@ -733,7 +586,6 @@ if (NOT ("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}"))
 endif()

 # Generate configuration file in the build directory: config/_config.hpp.
-set(MFEM_SHARED_BUILD ${BUILD_SHARED_LIBS})
 configure_file(
  "${PROJECT_SOURCE_DIR}/config/cmake/config.hpp.in"
  "${PROJECT_BINARY_DIR}/config/_config.hpp")
@@ -744,34 +596,16 @@ if (NOT ("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}"))
  foreach(Header mfem.hpp mfem-performance.hpp)
    message(STATUS
      "Writing substitute header --> \"${Header}\"")
-    file(WRITE "${PROJECT_BINARY_DIR}/${Header}.tmp"
+    file(WRITE "${PROJECT_BINARY_DIR}/${Header}"
 "// Auto-generated file.
 #define MFEM_CONFIG_FILE \"${PROJECT_BINARY_DIR}/config/_config.hpp\"
 #include \"${PROJECT_SOURCE_DIR}/${Header}\"
 ")
-
-    execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
-      "${PROJECT_BINARY_DIR}/${Header}.tmp"
-      "${PROJECT_BINARY_DIR}/${Header}"
-    )
-    execute_process(COMMAND ${CMAKE_COMMAND} -E remove
-      "${PROJECT_BINARY_DIR}/${Header}.tmp"
-    )
-
    # This version will be installed in the top include directory:
-    file(WRITE "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
+    file(WRITE "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}"
 "// Auto-generated file.
 #include \"mfem/${Header}\"
 ")
-
-    execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}"
-    )
-    execute_process(COMMAND ${CMAKE_COMMAND} -E remove
-      "${PROJECT_BINARY_DIR}/InstallHeaders/${Header}.tmp"
-    )
-
  endforeach()
 endif()

@@ -788,17 +622,11 @@ if (MFEM_ENABLE_TESTING)
  add_mfem_target(${MFEM_ALL_TESTS_TARGET_NAME} OFF)
  add_subdirectory(tests EXCLUDE_FROM_ALL)

-  if (MFEM_USE_BENCHMARK)
-    # Create a target for all benchmarks and, optionally, enable it.
-    set(MFEM_ALL_BENCHMARKS_TARGET_NAME benchmarks)
-    add_mfem_target(${MFEM_ALL_BENCHMARKS_TARGET_NAME}
-                    ${MFEM_ENABLE_BENCHMARKS})
-    if (MFEM_ENABLE_BENCHMARKS)
-      add_subdirectory(tests/benchmarks) #install benchmarks if enabled
-    else()
-      add_subdirectory(tests/benchmarks EXCLUDE_FROM_ALL)
-    endif()
-  endif()
+  # Create a target for all benchmarks and, optionally, enable it.
+  set(MFEM_ALL_BENCHMARKS_TARGET_NAME benchmarks)
+  add_mfem_target(${MFEM_ALL_BENCHMARKS_TARGET_NAME}
+                  ${MFEM_ENABLE_GOOGLE_BENCHMARKS})
+  add_subdirectory(tests/benchmarks EXCLUDE_FROM_ALL)
 endif()

 # Define a target that all examples and miniapps will depend on.
@@ -817,11 +645,7 @@ endif()
 # Create a target for all miniapps and, optionally, enable it.
 set(MFEM_ALL_MINIAPPS_TARGET_NAME miniapps)
 add_mfem_target(${MFEM_ALL_MINIAPPS_TARGET_NAME} ${MFEM_ENABLE_MINIAPPS})
-if (MFEM_ENABLE_MINIAPPS)
-  add_subdirectory(miniapps) #install miniapps if enabled
-else()
-  add_subdirectory(miniapps EXCLUDE_FROM_ALL)
-endif()
+add_subdirectory(miniapps EXCLUDE_FROM_ALL)

 # Target to build all executables, i.e. everything.
 add_custom_target(exec)
@@ -871,8 +695,15 @@ add_subdirectory(doc)
 #-------------------------------------------------------------------------------

 message(STATUS "CMAKE_INSTALL_PREFIX = ${CMAKE_INSTALL_PREFIX}")
+set(INSTALL_INCLUDE_DIR include
+  CACHE PATH "Relative path for installing header files.")
+set(INSTALL_LIB_DIR lib
+  CACHE PATH "Relative path for installing the library.")
+# other options: "share/mfem/cmake", "lib/mfem/cmake"
+set(INSTALL_CMAKE_DIR lib/cmake/mfem
+  CACHE PATH "Relative path for installing cmake config files.")

-target_include_directories(mfem BEFORE
+target_include_directories(mfem
  PUBLIC
    $<INSTALL_INTERFACE:${INSTALL_INCLUDE_DIR}>)

@@ -884,18 +715,16 @@ set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME Development)
 # Install the library
 install(TARGETS ${PROJECT_NAME}
  EXPORT ${PROJECT_NAME_UC}Targets
-  RUNTIME DESTINATION ${INSTALL_BIN_DIR}
-  LIBRARY DESTINATION ${INSTALL_LIB_DIR}
-  ARCHIVE DESTINATION ${INSTALL_LIB_DIR})
+  DESTINATION ${INSTALL_LIB_DIR})

-# Install the main headers
+# Install the master headers
 foreach(Header mfem.hpp mfem-performance.hpp)
  install(FILES ${PROJECT_BINARY_DIR}/InstallHeaders/${Header}
    DESTINATION ${INSTALL_INCLUDE_DIR})
 endforeach()
-install(FILES ${MAIN_HEADERS} DESTINATION ${INSTALL_INCLUDE_DIR}/mfem)
+install(FILES ${MASTER_HEADERS} DESTINATION ${INSTALL_INCLUDE_DIR}/mfem)

-# Install the headers (except common miniapp which is installed from its subdir)
+# Install the headers; currently, the miniapps headers are excluded
 install(DIRECTORY ${MFEM_SOURCE_DIRS}
  DESTINATION ${INSTALL_INCLUDE_DIR}/mfem
  FILES_MATCHING PATTERN "*.hpp")
@@ -924,8 +753,10 @@ endif()

 # Install the configuration header files
 install(FILES ${PROJECT_BINARY_DIR}/config/_config.hpp
-  ${PROJECT_SOURCE_DIR}/config/config.hpp
-  ${PROJECT_SOURCE_DIR}/config/tconfig.hpp
+  DESTINATION ${INSTALL_INCLUDE_DIR}/mfem/config
+  RENAME config.hpp)
+
+install(FILES ${PROJECT_SOURCE_DIR}/config/tconfig.hpp
  DESTINATION ${INSTALL_INCLUDE_DIR}/mfem/config)

 # Package the whole thing up nicely
@@ -3,10 +3,10 @@
 </p>

 <p align="center">
-<a href="https://github.com/mfem/mfem/blob/main/LICENSE"><img alt="License" src="https://img.shields.io/badge/License-BSD-brightgreen.svg"></a>
-<a href="https://github.com/mfem/mfem/actions?query=workflow%3Arepo-check+branch%3Amain"><img alt="Repo check" src="https://github.com/mfem/mfem/actions/workflows/repo-check.yml/badge.svg?branch=main"></a>
-<a href="https://github.com/mfem/mfem/actions?query=workflow%3Abuild-analysis+branch%3Amain"><img alt="Build Analysis" src="https://github.com/mfem/mfem/actions/workflows/mfem-analysis.yml/badge.svg?branch=main"></a>
-<a href="https://github.com/mfem/mfem/actions?query=workflow%3Abuilds-and-tests+branch%3Amain"><img alt="Builds and Tests" src="https://github.com/mfem/mfem/actions/workflows/builds-and-tests.yml/badge.svg?branch=main"></a>
+<a href="https://github.com/mfem/mfem/blob/master/LICENSE"><img alt="License" src="https://img.shields.io/badge/License-BSD-brightgreen.svg"></a>
+<a href="https://github.com/mfem/mfem/actions?query=workflow%3Arepo-check+branch%3Amaster"><img alt="Repo check" src="https://github.com/mfem/mfem/actions/workflows/repo-check.yml/badge.svg?branch=master"></a>
+<a href="https://github.com/mfem/mfem/actions?query=workflow%3Abuild-analysis+branch%3Amaster"><img alt="Build Analysis" src="https://github.com/mfem/mfem/actions/workflows/mfem-analysis.yml/badge.svg?branch=master"></a>
+<a href="https://github.com/mfem/mfem/actions?query=workflow%3Abuilds-and-tests+branch%3Amaster"><img alt="Builds and Tests" src="https://github.com/mfem/mfem/actions/workflows/builds-and-tests.yml/badge.svg?branch=master"></a>
 <a href="https://ci.appveyor.com/project/mfem/mfem"><img alt="Build Status" src="https://ci.appveyor.com/api/projects/status/19non9sqm6msi2wy?svg=true"></a>
 <a href="https://docs.mfem.org/html/index.html"><img alt="Doxygen" src="https://img.shields.io/badge/code-documented-brightgreen.svg"></a>
 </p>
@@ -27,7 +27,7 @@ in the MFEM community, you agree to abide by its rules.
 If you plan on contributing to MFEM, consider reviewing the
 [issue tracker](https://github.com/mfem/mfem/issues) first to check if a thread
 already exists for your desired feature or the bug you ran into. Use a pull
-request (PR) toward the `mfem:main` branch to propose your contribution. If
+request (PR) toward the `mfem:master` branch to propose your contribution. If
 you are planning significant code changes or have questions, you may want to
 open an [issue](https://github.com/mfem/mfem/issues) before issuing a PR. In
 addition to technical contributions, we are also interested in your results and
@@ -47,7 +47,7 @@ back to them before issuing pull requests:
  - [Pull Requests](#pull-requests)
  - [MFEM PR Rules](#mfem-pr-rules)
  - [Pull Request Checklist](#pull-request-checklist)
-  - [Main/Next Workflow](#mainnext-workflow)
+  - [Master/Next Workflow](#masternext-workflow)
  - [Releases](#releases)
  - [Release Checklist](#release-checklist)
 - [LLNL Workflow](#llnl-workflow)
@@ -66,12 +66,12 @@ Origin](#developers-certificate-of-origin-11) at the end of this file.*
 ## Quick Summary

 - We encourage you to [join the MFEM organization](#mfem-organization) and create
-  development branches off `mfem:main`.
+  development branches off `mfem:master`.
 - Please follow the [developer guidelines](#developer-guidelines), in particular
  with regards to documentation and code styling.
 - Please do not commit large/binary files to the central repository (use a fork
  instead).
- Pull requests should be issued toward `mfem:main`. Make sure
+- Pull requests should be issued toward `mfem:master`. Make sure
  to check the items off the [Pull Request Checklist](#pull-request-checklist) and
  follow the [MFEM PR Rules](#mfem-pr-rules).
 - When your contribution is fully working and ready to be reviewed, add
@@ -81,8 +81,8 @@ Origin](#developers-certificate-of-origin-11) at the end of this file.*
 - The reviewers have 3 weeks to evaluate the PR and work with the author to
  fix issues and implement improvements.
 - During review there should be no force pushes/rewriting history in the branch.
- After approval, MFEM developers merge the PR manually in the [mfem:next branch](#mainnext-workflow).
- After a week of testing in `mfem:next`, the original PR is merged in `mfem:main`.
+- After approval, MFEM developers merge the PR manually in the [mfem:next branch](#masternext-workflow).
+- After a week of testing in `mfem:next`, the original PR is merged in `mfem:master`.
 - We use [milestones](https://github.com/mfem/mfem/milestones) to coordinate the
  work on different PRs toward a release.
 - Don't hesitate to [contact us](#contact-information) if you have any questions.
@@ -120,18 +120,13 @@ The MFEM source code has the following structure:
  |   └── superlu
  ├── fem
  │   ├── ceed
-  │   ├── dfem
-  │   ├── eltrans
  │   ├── fe
-  │   ├── gslib
-  │   ├── integ
  │   ├── lor
  │   ├── moonolith
  │   ├── qinterp
  │   └── tmop
  ├── general
  ├── linalg
-  │   ├── batched
  │   └── simd
  ├── mesh
  │   └── submesh
@@ -139,11 +134,8 @@ The MFEM source code has the following structure:
  │   ├── adjoint
  │   ├── autodiff
  │   ├── common
-  │   ├── dfem
-  │   ├── dpg
  │   ├── electromagnetics
  │   ├── gslib
-  │   ├── hdiv-linear-solver
  │   ├── hooke
  │   ├── meshing
  │   ├── mtop
@@ -154,10 +146,8 @@ The MFEM source code has the following structure:
  │   ├── performance
  │   ├── shifted
  │   ├── solvers
-  │   ├── spde
  │   ├── tools
-  │   ├── toys
-  │   └── tribol
+  │   └── toys
  └── tests
      ├── benchmarks
      ├── convergence
@@ -219,7 +209,7 @@ device/host memory manager.
 - The main device-relevant classes and sources are:
  + [`Device`](https://docs.mfem.org/html/device_8hpp.html)
  + [`MemoryManager`](https://docs.mfem.org/html/mem_manager_8hpp.html)
-  + the [`mfem::forall`](https://docs.mfem.org/html/forall_8hpp.html) function
+  + the [`MFEM_FORALL`](https://docs.mfem.org/html/forall_8hpp.html) macro
  + the [`cuda.hpp`](https://docs.mfem.org/html/cuda_8hpp.html) and [`occa.hpp`](https://docs.mfem.org/html/occa_8hpp.html) files

 #### Utilities, building and documentation
@@ -289,7 +279,7 @@ Before you can start, you need a GitHub account, here are a few suggestions:
  author, is willing to work on it and be its champion.

 - The author creates a branch for the new feature (with suffix `-dev`), off
-  the `main` branch, or another existing feature branch, for example:
+  the `master` branch, or another existing feature branch, for example:

  ```
  # Clone assuming you have setup your ssh keys on GitHub:
@@ -298,8 +288,8 @@ Before you can start, you need a GitHub account, here are a few suggestions:
  # Alternatively, clone using the "https" protocol:
  git clone https://github.com/mfem/mfem.git

-  # Create a new feature branch starting from "main":
-  git checkout main
+  # Create a new feature branch starting from "master":
+  git checkout master
  git pull
  git checkout -b feature-dev

@@ -352,9 +342,6 @@ Before you can start, you need a GitHub account, here are a few suggestions:
 - Code specifics
  - All new public, protected, and private classes, methods, data members, and
    functions have Doxygen-style documentation in source comments.
-  - Math formulas can be included in the Doxygen comments either with standard
-    LaTeX (`$..$` and `$$..$$`) for portions that need detailed explanation, or with
-    [Unicode](https://www.unicodeit.net/) or plain text when short or readable description is preferable.
  - In addition to arguments and functionality, documentation should include the
    current limitations of the code, any background information that is
    implicitly assumed in the implementation, and the ownership and lifetime
@@ -368,14 +355,12 @@ Before you can start, you need a GitHub account, here are a few suggestions:
    conflicted files in the commit message.
  - All significant new features and changes should be documented in CHANGELOG.
  - New examples and miniapps should have documentation on the MFEM webpage.
-  - The general floating-point type `real_t` should be used, rather than
-    `float` or `double`, except in special cases where only one is possible.


 ### Pull Requests

 - When your branch is ready for other developers to review / comment on
-  the code, create a pull request towards `mfem:main`.
+  the code, create a pull request towards `mfem:master`.

 - Pull request typically have titles like:

@@ -411,7 +396,7 @@ Before you can start, you need a GitHub account, here are a few suggestions:
  assigned, the PR is considered under review. To help with the review process
  there should be no force pushes/rewriting history in the branch.

- After approval, the PR is [tested](#mainnext-workflow) for a week with
+- After approval, the PR is [tested](#masternext-workflow) for a week with
  other approved PRs in the `mfem:next` branch.

 - Consider manually running the tests in `tests/scripts` before merging in
@@ -447,7 +432,7 @@ The Pull Request (PR) approval process in MFEM is similar to the approval of pap

 3. A PR can be (manually) merged in the *next* branch only if 2 of the assigned reviewers have approved it and it has passed internal testing. This merge can be performed by any of the assigned reviewers or by any of the editors.

-4. A PR can be merged in the *main* branch only if it has been tested successfully for a week in *next* and an editor has (optionally) taken a final look. This merge can be performed only by one of the editors.
+4. A PR can be merged in the *master* branch only if it has been tested successfully for a week in *next* and an editor has (optionally) taken a final look. This merge can be performed only by one of the editors.

 #### Responsibilities of Editors

@@ -470,7 +455,7 @@ The current list of MFEM editors is:

 5. To remind the reviewers about timely completion of their review.

-6. To take a final look and complete the PR merge in *main*. The final look step is optional and shouldn't take more than 3 days.
+6. To take a final look and complete the PR merge in *master*. The final look step is optional and shouldn't take more than 3 days.

 7. The assignment of bugfixes should be expedited proportional to their importance, e.g. in some cases the editor can assign much shorter review window.

@@ -492,7 +477,7 @@ Everyone on the MFEM team can be asked to serve as a reviewer on a PR in their a

 5. To test the PR thoroughly before merging in *next*. The PR author is also encouraged to perform testing and inform the reviewers about the results.

-6. To monitor the PR impact on the testing in the *next* branch and alert the editors that the PR is ready for merging in *main*.
+6. To monitor the PR impact on the testing in the *next* branch and alert the editors that the PR is ready for merging in *master*.

 7. The review of bugfixes should be expedited proportional to their importance. The review window can be much less than three weeks in such cases.

@@ -551,8 +536,6 @@ Before a PR can be merged, it should satisfy the following:
      - [ ] Add a short description of the example in the "Extensive Examples" section of `features.md`.
 - [ ] New miniapps:
   - [ ] All sample runs at the top of the miniapp source file work.
-   - [ ] Add to internal testing repo, if sample runs should be included in nightly tests [internally](#tests-at-llnl).
-   - [ ] Exclude long sample runs from automated testing, with `* ` (one space) before the command.
   - [ ] Update top-level `makefile` and `makefile` in corresponding miniapp directory.
   - [ ] Add the miniapp binary and any files generated by it to the top-level `.gitignore` file.
   - [ ] Update CMake build system:
@@ -582,11 +565,11 @@ Before a PR can be merged, it should satisfy the following:
   - [ ] Update internal tests to include the new features.


-### Main/Next Workflow
+### Master/Next Workflow

-MFEM uses a `main`/`next`-branch workflow as described below:
+MFEM uses a `master`/`next`-branch workflow as described below:

- The `main` branch should always be of release quality and changes should not
+- The `master` branch should always be of release quality and changes should not
  be merged until they have been fully tested. This branch is protected, and
  changes can only be made through pull requests.

@@ -613,20 +596,20 @@ MFEM uses a `main`/`next`-branch workflow as described below:

 - After a week of testing in `next` (excluding bugfixes), both on GitHub, as
  well as [internally](#tests-at-llnl) at LLNL, the original PR is merged into
-  `main` (provided there are no issues).
+  `master` (provided there are no issues).

 - After the merge, the feature branch is deleted (unless it is a long-term
  project with periodic PRs).

 - The `next` branch is used just for integrated testing of all PRs approved for
-  merging into `main` to verify that each works individually and that all of
+  merging into `master` to verify that each works individually and that all of
  them work as a group. This branch can be discarded at any time, though we
  typically do that only at the end of a [release cycle](#releases).


 ### Releases

- Releases are just tags in the `main` branch, e.g. https://github.com/mfem/mfem/releases/tag/v3.3.2,
+- Releases are just tags in the `master` branch, e.g. https://github.com/mfem/mfem/releases/tag/v3.3.2,
  and have a version that ends in an even "patch" number, e.g. `v3.2.2` or
  `v3.4` (by convention `v3.4` is the same as `v3.4.0`.)  Between releases, the
  version ends in an odd "patch" number, e.g. `v3.3.3`.
@@ -679,19 +662,19 @@ MFEM uses a `main`/`next`-branch workflow as described below:

 ### Mirroring on Bitbucket

- The GitHub `main` and `next` branches are mirrored to the LLNL institutional
-  Bitbucket repository as `gh-main` and `gh-next`.
+- The GitHub `master` and `next` branches are mirrored to the LLNL institutional
+  Bitbucket repository as `gh-master` and `gh-next`.

- `gh-main` is merged into LLNL's internal `main` through pull requests; write
-  permissions to `main` are restricted to ensure this is the only way in which it
+- `gh-master` is merged into LLNL's internal `master` through pull requests; write
+  permissions to `master` are restricted to ensure this is the only way in which it
  gets updated.

 - We never push directly from LLNL to GitHub.

 - Versions of the code on LLNL's internal server, from most to least stable:
  - MFEM official release on mfem.org -- Most stable, tested in many apps.
-  - `mfem:main` -- Recent development version, guaranteed to work.
-  - `mfem:gh-main` -- Stable development version, passed testing, you can use
+  - `mfem:master` -- Recent development version, guaranteed to work.
+  - `mfem:gh-master` -- Stable development version, passed testing, you can use
     it to build your code between releases.
  - `mfem:gh-next` -- Bleeding-edge development version, may be broken, use at
     your own risk.
@@ -721,14 +704,14 @@ directory.


 ### Linux and Mac smoke tests
-We use GitHub Actions to drive the default tests on the `main` and `next`
+We use GitHub Actions to drive the default tests on the `master` and `next`
 branches. See the `.github/workflows` files and the logs at
 [https://github.com/mfem/mfem/actions](https://github.com/mfem/mfem/actions).

 Testing using GitHub Actions should be kept lightweight, as there is a time
 constraint on jobs. Two virtual machines are configured - Mac (OS X) and Linux.

- Tests on the `main` branch are triggered whenever a PR is issued on this branch.
+- Tests on the `master` branch are triggered whenever a PR is issued on this branch.
 - Tests on the `next` branch are currently scheduled to run each night.


@@ -744,10 +727,10 @@ and debug build is performed with a simple run of `ex1` to verify the executable

 ### Tests at LLNL

- We mirror the `main` and `next` branches internally (to `gh-main` and
+- We mirror the `master` and `next` branches internally (to `gh-master` and
  `gh-next`) and run longer nightly tests via cron. On the weekends, a more
  extensive test is run which extracts and executes all the different sample
-  runs from each example and most miniapps.
+  runs from each example.

 - We also mirror PRs on the LLNL GitLab instance. PR mirroring can only be
  triggered by _LLNL developers_, but test status is publicly available. Only
@@ -75,8 +75,6 @@ and miniapps. See https://glvis.org and https://mfem.org/building.

 Quick start with GNU make
 =========================
-See also: https://mfem.org/building
-
 Serial build:
   make serial -j 4

@@ -85,7 +83,6 @@ Parallel build:
   (build METIS 4 in ../metis-4.0 relative to mfem/)
   (build hypre in ../hypre relative to mfem/)
   make parallel -j 4
-(For METIS 5, see https://mfem.org/building/#parallel-build-using-metis-5)

 CUDA build:
   make cuda -j 4
@@ -119,22 +116,11 @@ Parallel build:
   mkdir <mfem-build-dir> ; cd <mfem-build-dir>
   cmake <mfem-source-dir> -DMFEM_USE_MPI=YES
   make -j 4
-(For METIS 5, see https://mfem.org/building/#parallel-build-using-metis-5)
-
-Parallel build with fetching of hypre and METIS:
-   mkdir <mfem-buil-dir> ; cd <mfem-build-dir>
-   cmake <mfem-source-dir> -DMFEM_USE_MPI=YES -DFETCH_TPLS=YES
-   make -j 4

 CUDA build:
-   (this build requires CMake 3.17 or newer)
+   (this build requires CMake 3.8 or newer)
   mkdir <mfem-build-dir> ; cd <mfem-build-dir>
-   cmake <mfem-source-dir> -DMFEM_USE_CUDA=YES -DCUDA_ARCH=sm_70
-   make -j 4
-
-HIP build:
-   mkdir <mfem-build-dir> ; cd <mfem-build-dir>
-   cmake <mfem-source-dir> -DMFEM_USE_HIP=YES -DHIP_ARCH=gfx942 -DCMAKE_CXX_COMPILER=amdclang++ -DCMAKE_HIP_COMPILER=amdclang++
+   cmake <mfem-source-dir> -DMFEM_USE_CUDA=YES
   make -j 4

 Example codes (serial/parallel, depending on the build):
@@ -230,10 +216,9 @@ An optional installation of the library and the headers can be performed with

   make install [PREFIX=<dir>]

-The library will be installed in ${PREFIX}/lib, the headers in
-${PREFIX}/include, and the configuration and testing makefiles (config.mk and
-test.mk) in ${PREFIX}/share/mfem. The PREFIX option can also be set during
-configuration.
+The library will be installed in $(PREFIX)/lib, the headers in
+$(PREFIX)/include, and the configuration makefile (config.mk) in
+$(PREFIX)/share/mfem. The PREFIX option can also be set during configuration.

 Information about the current build configuration can be viewed using

@@ -268,7 +253,7 @@ See the configuration file config/defaults.mk for the default settings.
 Compilers:
   CXX      - C++ compiler, serial build
   MPICXX   - MPI C++ compiler, parallel build
-   CUDA_CXX - The CUDA compiler, 'nvcc' or 'clang++'
+   CUDA_CXX - The CUDA compiler, 'nvcc'

 Compiler options:
   OPTIM_FLAGS - Options for optimized build
@@ -282,16 +267,9 @@ Build options:

 Installation options:
   PREFIX  - Specify the installation directory. The library (libmfem.a) will be
-             installed in ${PREFIX}/lib, the headers in ${PREFIX}/include, and
-             the configuration and testing makefiles (config.mk and test.mk) in
-             ${PREFIX}/share/mfem.
-   INSTALL - Specify the install program, default = /usr/bin/install
-   INSTALL_DEF_PERM - Specify the default install permissions. This affects
-                      headers and configuration makefiles, default = 644
-   INSTALL_BIN_PERM - Specify the install permissions for binaries. This only
-                      affects the shared version of the library, default = 755
-   INSTALL_DIR_PERM - Specify the install permissions for directories and,
-                      on macOS/BSD, for symlinks as well, default = 755
+             installed in $(PREFIX)/lib, the headers in $(PREFIX)/include, and
+             the configuration makefile (config.mk) in $(PREFIX)/share/mfem.
+   INSTALL - Specify the install program, e.g /usr/bin/install

 MFEM library features/options (GNU make)
 ----------------------------------------
@@ -306,15 +284,6 @@ MFEM_USE_METIS = YES/NO
   option in the library will be Cartesian partitioning with box meshes, and
   thus most of the parallel examples and miniapps will fail.

-MFEM_PRECISION = double/Double/DOUBLE/single/Single/SINGLE
-   Use single (float type) or double floating-point precision. In the
-   configuration header 'config/_config.hpp' this option is represented by
-   defining exactly one of the macros: MFEM_USE_DOUBLE, or MFEM_USE_SINGLE.
-   In the exported config files 'config.mk' and 'MFEMConfig.cmake', the option
-   is represented by the variables MFEM_USE_DOUBLE and MFEM_USE_SINGLE defined
-   as YES/NO (make) or ON/OFF (cmake). For more details see
-   https://github.com/orgs/mfem/discussions/4207
-
 MFEM_DEBUG = YES/NO
   Choose debug/optimized build. The debug build enables a number of messages
   and consistency checks that may simplify bug-hunting.
@@ -406,11 +375,6 @@ MFEM_USE_AMGX = YES/NO
   Allows the user to use SparseMatrices and HypreParMatrices to solve linear
   systems with the routines from the AmgX library.

-MFEM_USE_MAGMA = YES/NO
-   Enable MFEM functionality based on the MAGMA high-performance linear algebra
-   library. The MAGMA library provides a BLAS/LAPACK interface, with
-   implementations that have been optimized for Nvidia and AMD GPUs.
-
 MFEM_USE_GNUTLS = YES/NO
   Enable secure socket support in class socketstream, using the auxiliary
   GnuTLS_* classes, based on the GnuTLS library. This option may be useful in
@@ -428,10 +392,6 @@ MFEM_USE_GNUTLS = YES/NO
   When MFEM_USE_GNUTLS is enabled, the additional build options, GNUTLS_*, are
   also used, see below.

-MFEM_USE_HDF5 = YES/NO
-   The HDF5 library is used for input and output of HDF5 files, for example
-   Cubit mesh files or VTKHDF files for ParaView.
-
 MFEM_USE_NETCDF = YES/NO
   NetCDF is the library that is used by the SNL Cubit mesh generator to create
   Genesis mesh files. This option enables a reader for these files, which
@@ -518,14 +478,10 @@ MFEM_USE_CODIPACK = YES/NO
 MFEM_USE_ALGOIM = YES/NO
  Enable the usage of Algoim - a collection of high-order accurate numerical
  methods and C++ algorithms for working with implicitly-defined geometry and
-  level set methods, see https://algoim.github.io. MFEM provides interface to
-  Algoim v1. To check out the specific Algoim state use:
-  https://github.com/algoim/algoim
+  level set methods. The Algoim library requires the Blitz++ library. The MFEM
+  provides interface to Algoim v1. Thus, to check out the specific state use:
  git checkout 9c9ca0ef094d8ab0390ed36367a1151b459bbe0a
-  The Algoim library requires the Blitz++ library. To use the latest state of
-  Blitz++ that has been tested with MFEM, use:
-  https://github.com/blitzpp/blitz
-  git checkout f24a250a43dff88c31ad92916da828b7ea9a98b7
+  https://algoim.github.io

 MFEM_USE_ADFORWARD = YES/NO
  Enable forward mode for AD packages. This option is valid
@@ -606,19 +562,13 @@ MFEM_USE_PARELAG = YES/NO
   use ParELAG. In fact, ParELAG is dependent on MFEM. Therefore, this option
   currently only concerns the miniapps.

-MFEM_USE_TRIBOL = YES/NO
-   Enables the miniapps that use the Tribol library. MFEM does not currently
-   use Tribol. In fact, Tribol is dependent on MFEM. Therefore, this option
-   currently only concerns the miniapps.
-
 MFEM_USE_ENZYME = YES/NO
   Enables automatic differentiation support through the LLVM plugin Enzyme.
-   This requires the compiler to be set to clang (>=14.0.0). We also advise the
-   use of the link time optimization (LTO) plugin, so functions defined over
-   multiple files (compilation units) can be differentiated automatically. This
-   requires to also use LLVM/LLD for linking. The recommended options are in
-   config/defaults.mk. For more detailed instructions, see the section "Specific
-   options for Enzyme" below.
+   This requires the compiler to be set to clang (>=14.0.0). We also advise to
+   use the link time optimization (LTO) plugin, to enable functions that you
+   define over multiple files (compilation units) and want to be differentiated
+   automatically, to work. This requires to also use LLVM/LLD for linking.
+   Recommended options are in config/defaults.mk.

 MFEM_BUILD_TAG = (any value)
   An optional tag to characterize the build. Exported to config/config.mk.
@@ -648,13 +598,9 @@ The specific libraries and their options are:
            HYPRE >= 2.20.0   (HYPRE built with '--enable-mixedint')
            HYPRE >= 2.22.1   (HYPRE built with CUDA)
            HYPRE >= 2.23.0   (HYPRE built with HIP)
-            HYPRE >= 2.31.0   (runtime selectable HYPRE execution on CPU/GPU)

 - METIS, used when MFEM_USE_METIS = YES. If using METIS 5, set
-  MFEM_USE_METIS_5 = YES (default is to use METIS 4). For building instructions,
-  see the following:
-    - METIS 4.0.3: https://mfem.org/building/#parallel-mpi-version-of-mfem
-    - METIS 5.1.0: https://mfem.org/building/#parallel-build-using-metis-5
+  MFEM_USE_METIS_5 = YES (default is to use METIS 4).
  URL: https://github.com/mfem/tpls (MFEM mirror, see above)
  Options: METIS_OPT, METIS_LIB.
  Versions: METIS 4.0.3 or 5.1.0.
@@ -668,7 +614,6 @@ The specific libraries and their options are:
 - OpenMP (optional), usually part of compiler, used when either MFEM_USE_OPENMP
  or MFEM_USE_LEGACY_OPENMP is set to YES.
  Options: OPENMP_OPT, OPENMP_LIB.
-  Versions: OpenMP >= 3.1 when MFEM_USE_OPENMP=YES.

 - High-resolution POSIX clocks: when using MFEM_TIMER_TYPE = 2, it may be
  necessary to link with a system library (e.g. librt.so).
@@ -683,13 +628,9 @@ The specific libraries and their options are:
  both MPI and hypre.
  If MFEM_USE_CUDA is enabled, we expect that SUNDIALS is built with support
  for CUDA.
-  If MFEM_USE_HIP is enabled, we expect that SUNDIALS is built with support
-  for HIP.
-  URL: http://computing.llnl.gov/projects/sundials/sundials-software
+  URL: http://computation.llnl.gov/projects/sundials/sundials-software
  Options: SUNDIALS_OPT, SUNDIALS_LIB.
-  Versions: SUNDIALS >= 5.0.0,
-            SUNDIALS >= 5.4.0 for CUDA support, and
-            SUNDIALS >= 5.7.0 for HIP support.
+  Versions: SUNDIALS >= 5.0.0, SUNDIALS >= 5.4.0 for CUDA support.

 - SuiteSparse (optional), used when MFEM_USE_SUITESPARSE = YES.
  URL: http://faculty.cse.tamu.edu/davis/suitesparse.html
@@ -714,29 +655,25 @@ The specific libraries and their options are:
  requires the PT-Scotch and Scalapack libraries as well as ParMETIS, which
  includes METIS 5 in its distribution. Starting with STRUMPACK v2.2.0, ParMETIS
  and PT-Scotch are optional dependencies.
-  The support for STRUMPACK was added in MFEM v3.3.2.
+  The support for STRUMPACK was added in MFEM v3.3.2 and it requires STRUMPACK
+  2.0.0 or later.
  URL: http://portal.nersc.gov/project/sparse/strumpack
  Options: STRUMPACK_OPT, STRUMPACK_LIB.
  Versions: STRUMPACK >= 3.0.0.

 - Ginkgo (optional), used when MFEM_USE_GINKGO = YES. Note that Ginkgo needs a
-  C++ compiler that supports the C++-17 standard. For additional requirements
+  C++ compiler that supports the C++-14 standard. For additional requirements
  and dependencies of specific modules, see the Ginkgo webpage below.
  URL: https://ginkgo-project.github.io
  Options: GINKGO_OPT, GINKGO_LIB, GINKGO_DIR, GINKGO_BUILD_TYPE (Release or
           Debug).
-  Versions: Ginkgo >= 1.9.0.
+  Versions: Ginkgo >= 1.4.0.

 - AmgX (optional), used when MFEM_USE_AMGX = YES.
  URL: https://github.com/NVIDIA/AMGX
  Options: AMGX_OPT, AMGX_LIB.
  Versions: AmgX >= 2.1, older versions may work too.

- MAGMA (optional), used with MFEM_USE_MAGMA = YES.
-  URL: https://icl.utk.edu/magma/
-  Options: MAGMA_OPT, MAGMA_LIB
-  Versions: MAGMA >= 2.8.0
-
 - GnuTLS (optional), used when MFEM_USE_GNUTLS = YES. On most Linux systems,
  GnuTLS is available as a development package, e.g. gnutls-devel. On Mac OS X,
  one can get the library through the Homebrew package manager (http://brew.sh).
@@ -744,9 +681,6 @@ The specific libraries and their options are:
  Options: GNUTLS_OPT, GNUTLS_LIB.
  Versions: GnuTLS >= 2.12.0, older versions may work too.

- HDF5 (optional), used when MFEM_USE_HDF5 = YES, required for reading and
-  writing files in VTKHDF format.
-
 - NetCDF (optional), used when MFEM_USE_NETCDF = YES, required for reading Cubit
  mesh files. Also requires installation of HDF5 and ZLIB, as explained at the
  NetCDF web site. Note that we use the plain vanilla "C" version of NetCDF, you
@@ -755,20 +689,18 @@ The specific libraries and their options are:
  Options: NETCDF_OPT, NETCDF_LIB.
  Versions: NetCDF >= 4.4.0.

- PETSc (optional), used when MFEM_USE_PETSC = YES. Version 3.21 or higher of
-  the PETSC dev branch is required, though depending on the functionality older
-  versions may work too. The MFEM and PETSc builds can share common libraries,
-  e.g., hypre and SUNDIALS. Here's an example configuration, assuming
+- PETSc (optional), used when MFEM_USE_PETSC = YES. Version 3.8 or higher of
+  the PETSC dev branch is required. The MFEM and PETSc builds can share common
+  libraries, e.g., hypre and SUNDIALS. Here's an example configuration, assuming
  PETSc has been cloned on the same level as mfem and hypre:
    ./configure --download-fblaslapack=yes --download-scalapack=yes \
                --download-mumps=yes --download-suitesparse=yes \
-                --with-hypre-dir=../hypre/src/hypre \
+                --with-hypre-dir=../hypre-2.10.0b/src/hypre \
                --with-shared-libraries=0
-  When building PETSc with HIP, one may need to add a flag like -std=c2x to
-  CFLAGS to allow proper parsing of the hipsparse header under C.
  URL: https://www.mcs.anl.gov/petsc
  Options: PETSC_OPT, PETSC_LIB.
-  Versions: PETSc >= 3.21.0, older versions may work too.
+  Versions: PETSc >= 3.8.0   (PETSc build without CUDA)
+            PETSc >= 3.15.0  (PETSc built with CUDA)

 - SLEPc (optional), used when MFEM_USE_SLEPC = YES. SLEPc depends on PETSc and
  uses some of the PETSc options when compiled.
@@ -812,14 +744,14 @@ The specific libraries and their options are:
  Versions: 1.9.3

 - GSLIB (optional), used when MFEM_USE_GSLIB = YES. The gslib library must be
-  built prior to the MFEM build, as follows: download gslib-1.0.9, untar it at
-  the same level as MFEM and create a symbolic link: "ln -s gslib-1.0.9 gslib".
+  built prior to the MFEM build, as follows: download gslib-1.0.7, untar it at
+  the same level as MFEM and create a symbolic link: "ln -s gslib-1.0.7 gslib".
  Build gslib in parallel or in serial based on the desired MFEM build: "make
  clean; make CC=mpicc" or "make clean; make CC=gcc MPI=0". Build MFEM with
  MFEM_USE_GSLIB=YES.
-  URL: https://github.com/gslib/gslib/archive/v1.0.9.tar.gz
+  URL: https://github.com/gslib/gslib/archive/v1.0.7.tar.gz
  Options: GSLIB_OPT, GSLIB_LIB.
-  Versions: GSLIB >= 1.0.9.
+  Versions: GSLIB >= 1.0.7.

 - ALGOIM (optional), used when MFEM_USE_ALGOIM=YES. The library provides only
  headers so it just needs to be downloaded at the same level as MFEM. Download
@@ -842,13 +774,12 @@ The specific libraries and their options are:

 - CUDA (optional), used when MFEM_USE_CUDA = YES.
  URL: https://developer.nvidia.com/cuda-toolkit
-  Options: CUDA_CXX, CUDA_ARCH, CUDA_OPT, CUDA_LIB, CUDA_DIR (when CUDA_CXX=clang++).
+  Options: CUDA_CXX, CUDA_ARCH, CUDA_OPT, CUDA_LIB.
  Versions: CUDA >= 10.1.168.

 - HIP (optional), used when MFEM_USE_HIP = YES.
  URL: https://rocmdocs.amd.com
  Options: HIP_CXX, HIP_ARCH, HIP_OPT, HIP_LIB.
-  Versions: ROCm >= 5.6.1.

 - OCCA (optional), used when MFEM_USE_OCCA = YES.
  URL: https://libocca.org
@@ -859,13 +790,13 @@ The specific libraries and their options are:
  URL: https://github.com/CEED/libCEED
       https://ceed.exascaleproject.org/libceed
  Options: CEED_DIR, CEED_OPT, CEED_LIB.
-  Versions: libCEED >= 0.12.0.
+  Versions: libCEED >= 0.10.

 - RAJA (optional), used when MFEM_USE_RAJA = YES.
-  Beginning with MFEM v4.5.1, only RAJA v2022.10.3+ is supported.
+  Beginning with MFEM v4.3, only RAJA v0.14.0+ is supported.
  URL: https://github.com/LLNL/RAJA
  Options: RAJA_DIR, RAJA_OPT, RAJA_LIB.
-  Versions: RAJA >= 2022.10.3.
+  Versions: RAJA >= 0.14.0.

 - Moonolith (optional), use when MFEM_USE_MOONOLITH = YES.
  URL: https://bitbucket.org/zulianp/par_moonolith
@@ -912,14 +843,10 @@ The specific libraries and their options are:
  URL: https://github.com/LLNL/parelag
  Options: PARELAG_DIR, PARELAG_OPT, PARELAG_LIB.

- Tribol, used when MFEM_USE_TRIBOL = YES.
-  URL: https://github.com/LLNL/Tribol
-  Options: TRIBOL_DIR, TRIBOL_OPT, TRIBOL_LIB.
-
 - Enzyme, used when MFEM_USE_ENZYME = YES. Requires LLVM/Clang >= 14.0.0.
  URL: https://github.com/EnzymeAD/Enzyme
  Options: ENZYME_DIR, ENZYME_OPT, ENZYME_LIB.
-  Versions: Enzyme >= v0.0.176.
+  Versions: Enzyme >= v0.0.33.


 Building with CMake
@@ -1002,27 +929,15 @@ or
   cmake --build . --config Release --target install  [Xcode]
   cmake --build . --config Release --target INSTALL  [Visual Studio]

-By default, the library will be installed in ${CMAKE_INSTALL_PREFIX}/lib, the
-headers in ${CMAKE_INSTALL_PREFIX}/include, the configuration CMake files in
-${CMAKE_INSTALL_PREFIX}/lib/cmake/mfem, and the configuration and testing GNU
-make files in ${CMAKE_INSTALL_PREFIX}/share/mfem. For fine-tuning the
-installation directories the following variables can be used:
-INSTALL_INCLUDE_DIR, INSTALL_LIB_DIR, INSTALL_BIN_DIR (e.g. for dll files on
-Windows), INSTALL_SHARE_DIR, and INSTALL_CMAKE_DIR; alternatively, with lower
-precedence, the CMake GNUInstallDirs variables can also be used:
-CMAKE_INSTALL_INCLUDEDIR, CMAKE_INSTALL_LIBDIR, CMAKE_INSTALL_BINDIR and
-CMAKE_INSTALL_DATAROOTDIR. Note that the default for INSTALL_LIB_DIR and
-CMAKE_INSTALL_LIBDIR is lib. This is in contrast to the default behavior for
-GNUInstallDirs, which defines a platform-dependent default value for
-CMAKE_INSTALL_LIBDIR (lib or lib64 or lib/<multiarch-tuple> on Debian). To
-restore this behavior, the user can set MFEM_USE_GNUINSTALLDIRS=YES.
+The library will be installed in <PREFIX>/lib, the headers in <PREFIX>/include,
+and the configuration CMake files in <PREFIX>/lib/cmake/mfem.


 Configuration variables (CMake)
 ===============================
 See the configuration file config/defaults.cmake for the default settings.

-Note: the option MFEM_USE_CUDA requires CMake version 3.17 or newer!
+Note: the option MFEM_USE_CUDA requires CMake version 3.8 or newer!

 Non-standard CMake variables for compilers:
   CXX    - If set, overwrite the auto-detected C++ compiler, serial build
@@ -1038,7 +953,6 @@ The following options are equivalent to the GNU make options with the same name:

 MFEM_USE_MPI
 MFEM_USE_METIS - Set to ${MFEM_USE_MPI}, can be overwritten.
-MFEM_PRECISION
 MFEM_USE_LIBUNWIND
 MFEM_USE_LAPACK
 MFEM_THREAD_SAFE
@@ -1053,7 +967,6 @@ MFEM_USE_STRUMPACK
 MFEM_USE_GINKGO
 MFEM_USE_AMGX
 MFEM_USE_GNUTLS
-MFEM_USE_HDF5
 MFEM_USE_NETCDF
 MFEM_USE_MPFR
 MFEM_USE_ZLIB
@@ -1073,7 +986,6 @@ MFEM_USE_CALIPER
 MFEM_USE_FMS
 MFEM_USE_BENCHMARK
 MFEM_USE_PARELAG
-MFEM_USE_TRIBOL
 MFEM_USE_ENZYME

 The following options are CMake specific:
@@ -1081,9 +993,6 @@ The following options are CMake specific:
 MFEM_ENABLE_TESTING  - Enable the ctest framework for testing.
 MFEM_ENABLE_EXAMPLES - Build all of the examples by default.
 MFEM_ENABLE_MINIAPPS - Build all of the miniapps by default.
-FETCH_TPLS           - Enable fetching of all supported third-party libraries.
-HYPRE_FETCH          - Enable fetching of hypre.
-METIS_FETCH          - Enable fetching of metis.

 External libraries (CMake):
 ---------------------------
@@ -1145,12 +1054,6 @@ The following built-in CMake packages are also used:
      set the <LIBNAME>_LIBRARIES option directly; the configuration option
      <LIBNAME>_DIR is not supported.

-The MFEM CMake build system also provides fetching (automated building) for the
-packages/libraries listed below. Note that when fetching is enabled, any related
-auto-detection functionality is disabled.
-
- - HYPRE
- - METIS

 Building without GNU make or CMake
 ==================================
@@ -1191,89 +1094,6 @@ larger problems, there are two options:
 1. Building hypre with '--enable-bigint' defines the local and global indices to
   be 64-bit. This is convenient, but requires more memory than necessary.

-2. Building hypre with '--enable-mixedint' defines the local indices to be
+2. Building hypre with '--enable-mixedint' defines the local indiced to be
   32-bit, while using a 64-bit storage for global indices. This option is
   currently tested only in ex1p, and may not work in more general settings.
-
-Specific options for HIP
-========================
-MFEM expects the `ROCM_PATH` environment variable to be set to the path of the
-ROCM install, as well as having `$ROCM_PATH/bin` in `PATH`.
-
-Specific options for RAJA+HIP+MPI
-=================================
-RAJA uses CMake's built-in HIP support (added in CMake 3.21), while MFEM uses
-the older HIP C++ library build/linkage. To ensure proper build and linkage
-check that `CMAKE_CXX_COMPILER` and `CMAKE_HIP_COMPILER` are set to the same
-compiler. This is especially important when using an MPI compiler (for example
-crayCC) where some linker flags may get dropped if these two are not identical.
-
-Specific options for Enzyme
-===========================
-To work properly, MFEM and Enzyme need to use the same LLVM/Clang configuration.
-For example, on macOS this can be done by using Homebrew: first install Enzyme,
-which in turn installs LLVM as a dependency (as of May 2025, this is LLVM 19):
-
-   brew install enzyme
-
-In order to ensure the correct compiler choice for the MFEM makefile build, set
-
-   CXX = $(shell brew --prefix llvm@19)/bin/clang++
-
-in the user.mk file (adapted from config/defaults.mk, see the section "Building
-with GNU make" above). With MPI, it is convenient to set
-
-   MPICXX = OMPI_CXX=$(CXX) mpicxx
-
-for OpenMPI and
-
-   MPICXX = MPICH_CXX=$(CXX) mpicxx
-
-for MPICH.
-
-Additionally, the Enzyme directory needs to be set in user.mk as follows:
-
-   ENZYME_DIR = $(shell brew --prefix enzyme)
-
-Specifically, a full build on a Mac can be tested by adding the following
-user.mk file in the config/ directory
-
-   MFEM_USE_ENZYME = YES
-   ENZYME_DIR = $(shell brew --prefix enzyme)
-   LLVM_DIR = $(shell brew --prefix llvm@19)
-   CXX = $(LLVM_DIR)/bin/clang++
-   MFEM_USE_MPI = YES
-   MPICXX = OMPI_CXX=$(CXX) mpicxx
-
-and running
-
-   make config
-   make -j
-   cd miniapps/dfem
-   make
-   ./dfem-minimal-surface
-
-On Linux systems, for example Ubuntu 24.04, use the package manager to install
-the Enzyme dependencies
-
-   sudo apt install libclang-dev libzstd-dev llvm-dev clang
-
-and then clone and build Enzyme
-
-   cd $HOME
-   git clone https://github.com/EnzymeAD/Enzyme.git
-   cd Enzyme/enzyme && mkdir build && cd build
-   CC=clang CXX=clang++ cmake .. -DLLVM_DIR=/usr/lib/llvm-18/lib/cmake -DCMAKE_INSTALL_PREFIX=$HOME/Enzyme/enzyme/build
-   make -j
-   make install
-
-From here, one can proceed in the same way using the following user.mk settings
-
-   MFEM_USE_ENZYME = YES
-   ENZYME_DIR = $(HOME)/Enzyme/enzyme/build
-   CXX = clang++
-   MFEM_USE_MPI = YES
-   MPICXX = OMPI_CXX=$(CXX) mpicxx
-
-On other Linux systems the LLVM packages may have different names, for example
-on RHEL9, one needs to "sudo yum install llvm-devel libzstd clang-devel".
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC
+Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -287,7 +287,3 @@ ENDIF()
 IF (DEFINED TPL_ENABLE_PARELAG)
  SET(MFEM_USE_PARELAG ${TPL_ENABLE_PARELAG} CACHE BOOL "Enable ParELAG" FORCE)
 ENDIF()
-
-IF (DEFINED TPL_ENABLE_TRIBOL)
-  SET(MFEM_USE_TRIBOL ${TPL_ENABLE_TRIBOL} CACHE BOOL "Enable Tribol" FORCE)
-ENDIF()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,8 +18,6 @@ set(MFEM_GIT_STRING "@MFEM_GIT_STRING@")
 set(MFEM_USE_MPI @MFEM_USE_MPI@)
 set(MFEM_USE_METIS @MFEM_USE_METIS@)
 set(MFEM_USE_METIS_5 @MFEM_USE_METIS_5@)
-set(MFEM_USE_DOUBLE @MFEM_USE_DOUBLE@)
-set(MFEM_USE_SINGLE @MFEM_USE_SINGLE@)
 set(MFEM_DEBUG @MFEM_DEBUG@)
 set(MFEM_USE_EXCEPTIONS @MFEM_USE_EXCEPTIONS@)
 set(MFEM_USE_ZLIB @MFEM_USE_ZLIB@)
@@ -37,11 +35,9 @@ set(MFEM_USE_MUMPS @MFEM_USE_MUMPS@)
 set(MFEM_USE_STRUMPACK @MFEM_USE_STRUMPACK@)
 set(MFEM_USE_GINKGO @MFEM_USE_GINKGO@)
 set(MFEM_USE_AMGX @MFEM_USE_AMGX@)
-set(MFEM_USE_MAGMA @MFEM_USE_MAGMA@)
 set(MFEM_USE_HIOP @MFEM_USE_HIOP@)
 set(MFEM_USE_GNUTLS @MFEM_USE_GNUTLS@)
 set(MFEM_USE_GSLIB @MFEM_USE_GSLIB@)
-set(MFEM_USE_HDF5 @MFEM_USE_HDF5@)
 set(MFEM_USE_NETCDF @MFEM_USE_NETCDF@)
 set(MFEM_USE_PETSC @MFEM_USE_PETSC@)
 set(MFEM_USE_SLEPC @MFEM_USE_SLEPC@)
@@ -51,7 +47,6 @@ set(MFEM_USE_FMS @MFEM_USE_FMS@)
 set(MFEM_USE_CONDUIT @MFEM_USE_CONDUIT@)
 set(MFEM_USE_PUMI @MFEM_USE_PUMI@)
 set(MFEM_USE_CUDA @MFEM_USE_CUDA@)
-set(MFEM_USE_HIP @MFEM_USE_HIP@)
 set(MFEM_USE_OCCA @MFEM_USE_OCCA@)
 set(MFEM_USE_RAJA @MFEM_USE_RAJA@)
 set(MFEM_USE_CEED @MFEM_USE_CEED@)
@@ -60,14 +55,11 @@ set(MFEM_USE_SIMD @MFEM_USE_SIMD@)
 set(MFEM_USE_ADIOS2 @MFEM_USE_ADIOS2@)
 set(MFEM_USE_MOONOLITH @MFEM_USE_MOONOLITH@)
 set(MFEM_USE_CODIPACK @MFEM_USE_CODIPACK@)
-set(MFEM_USE_MKL_CPARDISO @MFEM_USE_MKL_CPARDISO@)
-set(MFEM_USE_MKL_PARDISO @MFEM_USE_MKL_PARDISO@)
 set(MFEM_USE_ADFORWARD @MFEM_USE_ADFORWARD@)
 set(MFEM_USE_CALIPER @MFEM_USE_CALIPER@)
 set(MFEM_USE_ALGOIM @MFEM_USE_ALGOIM@)
 set(MFEM_USE_BENCHMARK @MFEM_USE_BENCHMARK@)
 set(MFEM_USE_PARELAG @MFEM_USE_PARELAG@)
-set(MFEM_USE_TRIBOL @MFEM_USE_TRIBOL@)
 set(MFEM_USE_ENZYME @MFEM_USE_ENZYME@)

 set(MFEM_CXX_COMPILER "@CMAKE_CXX_COMPILER@")
@@ -84,31 +76,6 @@ set_and_check(MFEM_LIBRARY_DIR "@PACKAGE_LIB_INSTALL_DIR@")

 check_required_components(MFEM)

-include(CMakeFindDependencyMacro)
-
-if (MFEM_USE_CUDA)
-  # required for projects linking to MFEM+CUDA, even if they don't use CUDA directly
-  find_dependency(CUDAToolkit)
-endif (MFEM_USE_CUDA)
-
-if (MFEM_USE_HIP)
-  # hip/rocm uses the modern MFEM way of linking to targets, need to find dependencies
-  find_dependency(HIP)
-  find_dependency(HIPBLAS)
-  find_dependency(HIPSPARSE)
-  if (MFEM_USE_MPI)
-    # assume HYPRE uses HIP
-    # alternatively could check HYPRE_USING_HIP
-    find_dependency(rocsparse)
-    find_dependency(rocrand)
-    find_dependency(rocsolver)
-  endif (MFEM_USE_MPI)
-endif (MFEM_USE_HIP)
-
-if (MFEM_USE_RAJA)
-   find_dependency(RAJA)
-endif()
-
 if (NOT TARGET mfem)
  include(${CMAKE_CURRENT_LIST_DIR}/MFEMTargets.cmake)
 endif (NOT TARGET mfem)
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -39,19 +39,10 @@
 // Description of the git commit used to build MFEM.
 #cmakedefine MFEM_GIT_STRING "@MFEM_GIT_STRING@"

-// Enable shared library build of MFEM.
-#cmakedefine MFEM_SHARED_BUILD
-
 // Build the parallel MFEM library.
 // Requires an MPI compiler, and the libraries HYPRE and METIS.
 #cmakedefine MFEM_USE_MPI

-// Use double-precision floating point type
-#cmakedefine MFEM_USE_DOUBLE
-
-// Use single-precision floating point type
-#cmakedefine MFEM_USE_SINGLE
-
 // Enable debug checks in MFEM.
 #cmakedefine MFEM_DEBUG

@@ -86,108 +77,97 @@
 // Internal MFEM option: enable group/batch allocation for some small objects.
 #cmakedefine MFEM_USE_MEMALLOC

-// Which library functions to use in class StopWatch for measuring time.
-// For a list of the available options, see INSTALL.
-// If not defined, an option is selected automatically.
-#cmakedefine MFEM_TIMER_TYPE @MFEM_TIMER_TYPE@
-
-// Enable MFEM functionality based on the SUNDIALS libraries.
-#cmakedefine MFEM_USE_SUNDIALS
-
 // Enable MFEM functionality based on the SuiteSparse library.
 #cmakedefine MFEM_USE_SUITESPARSE

 // Enable MFEM functionality based on the SuperLU_DIST library.
 #cmakedefine MFEM_USE_SUPERLU
-#cmakedefine MFEM_USE_SUPERLU5

 // Enable MFEM functionality based on the MUMPS library.
 #cmakedefine MFEM_USE_MUMPS
-#cmakedefine MFEM_MUMPS_VERSION @MFEM_MUMPS_VERSION@

 // Enable MFEM functionality based on the STRUMPACK library.
 #cmakedefine MFEM_USE_STRUMPACK

-// Enable functionality based on the Ginkgo library.
+// Enable functionality based on the Ginkgo library
 #cmakedefine MFEM_USE_GINKGO

-// Enable MFEM functionality based on the AmgX library.
+// Enable MFEM functionality based on the AmgX library
 #cmakedefine MFEM_USE_AMGX

-// Enable MFEM functionality based on the MAGMA library.
-#cmakedefine MFEM_USE_MAGMA
-
-// Enable secure socket streams based on the GNUTLS library.
+// Enable MFEM functionality based on the GnuTLS library
 #cmakedefine MFEM_USE_GNUTLS

-// Enable Sidre support.
-#cmakedefine MFEM_USE_SIDRE
-
-// Enable the use of SIMD in the high performance templated classes.
-#cmakedefine MFEM_USE_SIMD
-
-// Enable FMS support.
-#cmakedefine MFEM_USE_FMS
-
-// Enable Conduit support.
-#cmakedefine MFEM_USE_CONDUIT
-
-// Enable functionality based on the HDF5 library (reading VTKHDF files).
-#cmakedefine MFEM_USE_HDF5
-
-// Enable functionality based on the NetCDF library (reading CUBIT files).
-#cmakedefine MFEM_USE_NETCDF
-
-// Enable functionality based on the PETSc library.
-#cmakedefine MFEM_USE_PETSC
-
-// Enable functionality based on the SLEPc library.
-#cmakedefine MFEM_USE_SLEPC
-
-// Enable functionality based on the MPFR library.
-#cmakedefine MFEM_USE_MPFR
-
-// Enable MFEM functionality based on the PUMI library.
-#cmakedefine MFEM_USE_PUMI
-
-// Enable Moonolith-based general interpolation between finite element spaces.
-#cmakedefine MFEM_USE_MOONOLITH
-
-// Enable MFEM functionality based on the HIOP library.
-#cmakedefine MFEM_USE_HIOP
-
-// Enable MFEM functionality based on the GSLIB library.
+// Enable MFEM functionality based on the GSLIB library
 #cmakedefine MFEM_USE_GSLIB

-// Build the NVIDIA GPU/CUDA-enabled version of the MFEM library.
+// Enable MFEM functionality based on the NetCDF library
+#cmakedefine MFEM_USE_NETCDF
+
+// Enable MFEM functionality based on the PETSc library
+#cmakedefine MFEM_USE_PETSC
+
+// Enable MFEM functionality based on the SLEPc library
+#cmakedefine MFEM_USE_SLEPC
+
+// Enable MFEM functionality based on the Sidre library
+#cmakedefine MFEM_USE_SIDRE
+
+// Enable the use of SIMD in the high performance templated classes
+#cmakedefine MFEM_USE_SIMD
+
+// Enable MFEM functionality based on the FMS library
+#cmakedefine MFEM_USE_FMS
+
+// Enable MFEM functionality based on Conduit
+#cmakedefine MFEM_USE_CONDUIT
+
+// Enable MFEM functionality based on the PUMI library
+#cmakedefine MFEM_USE_PUMI
+
+// Enable MFEM functionality based on the Moonolith library
+#cmakedefine MFEM_USE_MOONOLITH
+
+// Enable MFEM functionality based on the HiOp library
+#cmakedefine MFEM_USE_HIOP
+
+// Build the GPU/CUDA-enabled version of the MFEM library.
 // Requires a CUDA compiler (nvcc).
 #cmakedefine MFEM_USE_CUDA

-// Build the AMD GPU/HIP-enabled version of the MFEM library.
+// Build the HIP-enabled version of the MFEM library.
 // Requires a HIP compiler (hipcc).
 #cmakedefine MFEM_USE_HIP

-// Enable functionality based on the RAJA library.
+// Enable MFEM functionality based on the RAJA library
 #cmakedefine MFEM_USE_RAJA

-// Enable functionality based on the OCCA library.
+// Enable MFEM functionality based on the OCCA library
 #cmakedefine MFEM_USE_OCCA

-// Enable functionality based on the libCEED library.
+// Enable MFEM functionality based on the libCEED library
 #cmakedefine MFEM_USE_CEED

-// Enable functionality based on the Caliper library.
-#cmakedefine MFEM_USE_CALIPER
-
-// Enable functionality based on the Algoim library.
-#cmakedefine MFEM_USE_ALGOIM
-
-// Enable functionality based on the Umpire library.
+// Enable MFEM functionality based on the Umpire library
 #cmakedefine MFEM_USE_UMPIRE

-// Enable IO functionality based on the ADIOS2 library.
+// Enable MFEM functionality based on the ADIOS2 library
 #cmakedefine MFEM_USE_ADIOS2

+// Enable MFEM functionality based on the Caliper library
+#cmakedefine MFEM_USE_CALIPER
+
+// Enable MFEM functionality based on the Algoim library
+#cmakedefine MFEM_USE_ALGOIM
+
+// Which library functions to use in class StopWatch for measuring time.
+// For a list of the available options, see INSTALL.
+// If not defined, an option is selected automatically.
+#define MFEM_TIMER_TYPE @MFEM_TIMER_TYPE@
+
+// Enable MFEM functionality based on the SUNDIALS libraries.
+#cmakedefine MFEM_USE_SUNDIALS
+
 // Version of HYPRE used for building MFEM.
 #cmakedefine MFEM_HYPRE_VERSION @MFEM_HYPRE_VERSION@

@@ -198,16 +178,13 @@
 // Enable interface to the MKL CPardiso library.
 #cmakedefine MFEM_USE_MKL_CPARDISO

-// Enable interface to the MKL Pardiso library.
-#cmakedefine MFEM_USE_MKL_PARDISO
-
-// Use forward mode for automatic differentiation.
+// Use forward mode for automatic differentiation
 #cmakedefine MFEM_USE_ADFORWARD

-// Enable the use of the CoDiPack library for AD.
+// Enable the use of the CoDiPack library for AD
 #cmakedefine MFEM_USE_CODIPACK

-// Enable functionality based on the Google Benchmark library.
+// Enable MFEM functionality based on the Google Benchmark library.
 #cmakedefine MFEM_USE_BENCHMARK

 // Enable Enzyme for AD
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -16,7 +16,7 @@

 include(MfemCmakeUtilities)
 mfem_find_package(Algoim ALGOIM ALGOIM_DIR
-        "include;src" "algoim_quad.hpp"
+       	"include" "algoim_quad.hpp"
       	"" ""
-        "Paths to headers required by Algoim."
-        "Libraries required by Algoim.")
+	"Paths to headers required by Algoim."
+	"Libraries required by Algoim.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,13 +18,4 @@ include(MfemCmakeUtilities)
 # Note: components are enabled based on the find_package() parameters.
 mfem_find_package(Axom AXOM AXOM_DIR "include" "" "lib" ""
  "Paths to headers required by Axom." "Libraries required by Axom."
-  ADD_COMPONENT core "include" axom/core.hpp "lib" axom_core
-  ADD_COMPONENT inlet "include" axom/inlet.hpp "lib" axom_inlet
-  ADD_COMPONENT klee "include" axom/klee.hpp "lib" axom_klee
-  ADD_COMPONENT lumberjack "include" axom/lumberjack.hpp "lib" axom_lumberjack
-  ADD_COMPONENT mint "include" axom/mint.hpp "lib" axom_mint
-  ADD_COMPONENT multimat "include" axom/multimat.hpp "lib" axom_multimat
-  ADD_COMPONENT quest "include" axom/quest.hpp "lib" axom_quest
-  ADD_COMPONENT sidre "include" axom/sidre.hpp "lib" axom_sidre
-  ADD_COMPONENT slam "include" axom/slam.hpp "lib" axom_slam
-  ADD_COMPONENT slic "include" axom/slic.hpp "lib" axom_slic)
+  ADD_COMPONENT Axom "include" axom/config.hpp "lib" axom)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -21,26 +21,15 @@ if(EXISTS ${CONDUIT_DIR}/include/conduit/conduit_relay_hdf5.hpp)
  # we only need  HDF5 if Conduit was built with HDF5 support
  set(Conduit_REQUIRED_PACKAGES "HDF5" CACHE STRING
      "Additional packages required by Conduit.")
-  # Suppress warning about HDF5_ROOT being set
-  if (POLICY CMP0074)
-    cmake_policy(SET CMP0074 NEW)
-  endif()
-  # HDF5_ROOT is needed in some cases, e.g. when HDF5_TARGET_NAMES is set and
-  # MFEM's FindHDF5.cmake is not used.
-  set(HDF5_ROOT ${HDF5_DIR} CACHE PATH "")
-else()
-  message(STATUS "Conduit Relay HDF5 Support is DISABLED")
+  else()
+    message(STATUS "Conduit Relay HDF5 Support is DISABLED")
 endif()

 include(MfemCmakeUtilities)
 mfem_find_package(Conduit CONDUIT CONDUIT_DIR
  "include;include/conduit" conduit.hpp "lib" conduit
  "Paths to headers required by Conduit." "Libraries required by Conduit."
-  ADD_COMPONENT blueprint
-    "include;include/conduit" conduit_blueprint.hpp "lib" conduit_blueprint
-  ADD_COMPONENT blueprint_mpi
-    "include;include/conduit" conduit_blueprint_mpi.hpp "lib" conduit_blueprint_mpi
  ADD_COMPONENT relay
    "include;include/conduit" conduit_relay.hpp "lib" conduit_relay
-  ADD_COMPONENT relay_mpi
-    "include;include/conduit" conduit_relay_mpi.hpp "lib" conduit_relay_mpi)
+  ADD_COMPONENT blueprint
+      "include;include/conduit" conduit_blueprint.hpp "lib" conduit_blueprint)
@@ -0,0 +1,27 @@
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
+# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
+# LICENSE and NOTICE for details. LLNL-CODE-806117.
+#
+# This file is part of the MFEM library. For more information and source code
+# availability visit https://mfem.org.
+#
+# MFEM is free software; you can redistribute it and/or modify it under the
+# terms of the BSD-3 license. We welcome feedback and contributions, see file
+# CONTRIBUTING.md for details.
+
+message(STATUS "Looking for ENZYME ...")
+message(STATUS "   in ENZYME_DIR = ${ENZYME_DIR}")
+
+# Make sure the directory and version combination works. Do nothing otherwise.
+if(EXISTS "${ENZYME_DIR}/ClangEnzyme-${ENZYME_VERSION}.so")
+  message(STATUS "Found ENZYME: ${ENZYME_DIR}/ClangEnzyme-${ENZYME_VERSION}.so")
+
+  # Set ENZYME_FOUND
+  set(ENZYME_FOUND TRUE CACHE BOOL "ENZYME was found." FORCE)
+
+  # Set CXX flags to accommodate the Enzyme Clang plugin
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Xclang -load -Xclang ${ENZYME_DIR}/ClangEnzyme-${ENZYME_VERSION}.so -mllvm -enzyme-loose-types=1")
+  set(MFEM_USE_ENZYME YES)
+else()
+
+endif()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -9,119 +9,17 @@
 # terms of the BSD-3 license. We welcome feedback and contributions, see file
 # CONTRIBUTING.md for details.

-# Defines the following variables if fetching of TPLs is disabled (default):
+# Defines the following variables:
 #   - HYPRE_FOUND
 #   - HYPRE_LIBRARIES
 #   - HYPRE_INCLUDE_DIRS
 #   - HYPRE_VERSION
-#   - HYPRE_USING_CUDA (internal)
 #   - HYPRE_USING_HIP (internal)
-# otherwise, the following are defined:
-#   - HYPRE (imported library target)
-#   - HYPRE_VERSION (cache variable)

-if (HYPRE_FOUND OR TARGET HYPRE)
-  if (HYPRE_USING_CUDA)
-    find_package(CUDAToolkit REQUIRED)
-  endif()
+if (HYPRE_FOUND)
  if (HYPRE_USING_HIP)
    find_package(rocsparse REQUIRED)
    find_package(rocrand REQUIRED)
-    find_package(rocsolver REQUIRED)
-  endif()
-  if (HYPRE_LIBRARIES AND HYPRE_INCLUDE_DIRS AND HYPRE_VERSION)
-    find_package_handle_standard_args(HYPRE
-      REQUIRED_VARS HYPRE_LIBRARIES HYPRE_INCLUDE_DIRS HYPRE_VERSION
-    )
-    return()
-  endif()
-endif()
-
-if (HYPRE_FETCH OR FETCH_TPLS)
-  # Collect all HYPRE_ENABLE variables and pass them to hypre, assuming they are BOOL.
-  set(HYPRE_CMAKE_OPTIONS "")
-  get_cmake_property(all_vars VARIABLES)
-  foreach(var ${all_vars})
-    if(var MATCHES "^HYPRE_ENABLE")
-      list(APPEND HYPRE_CMAKE_OPTIONS "-D${var}:BOOL=${${var}}")
-    endif()
-  endforeach()
-
-  set(HYPRE_FETCH_VERSION 2.33.0)
-  set(HYPRE_FETCH_TAG "v${HYPRE_FETCH_VERSION}" CACHE STRING "Tag, branch, or commit for HYPRE")
-  add_library(HYPRE STATIC IMPORTED)
-  # set options and associated dependencies
-  list(APPEND HYPRE_CMAKE_OPTIONS -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
-  if (MFEM_USE_CUDA)
-    list(APPEND HYPRE_CMAKE_OPTIONS -DHYPRE_ENABLE_CUDA:BOOL=ON -DCMAKE_CUDA_ARCHITECTURES:STRING=${CMAKE_CUDA_ARCHITECTURES})
-    find_package(CUDAToolkit REQUIRED)
-    target_link_libraries(HYPRE INTERFACE CUDA::cusparse CUDA::curand CUDA::cublas)
-  elseif (MFEM_USE_HIP)
-    list(APPEND HYPRE_CMAKE_OPTIONS -DHYPRE_ENABLE_HIP:BOOL=ON)
-    find_package(rocsparse REQUIRED)
-    find_package(rocrand REQUIRED)
-    target_link_libraries(HYPRE INTERFACE rocsparse rocrand)
-  endif()
-  if (MFEM_USE_CUDA OR MFEM_USE_HIP)
-    if (MFEM_USE_UMPIRE)
-      if (EXISTS ${umpire_DIR})
-        list(APPEND HYPRE_CMAKE_OPTIONS -DHYPRE_ENABLE_UMPIRE:BOOL=ON -Dumpire_DIR:PATH=${umpire_DIR})
-      else()
-        message(FATAL_ERROR "MFEM_USE_UMPIRE=ON, however umpire_DIR isn't visible to HYPRE")
-      endif()
-    else()
-      list(APPEND HYPRE_CMAKE_OPTIONS -DHYPRE_ENABLE_UMPIRE:BOOL=OFF)
-      message(WARNING
-"================================================================================
- Umpire is disabled while building HYPRE with GPU support.
- This is not recommended for performance reasons!
- Consider enabling Umpire with -DMFEM_USE_UMPIRE=ON and providing -DUMPIRE_DIR.
-================================================================================")
-    endif()
-  endif()
-  if (MFEM_USE_SINGLE)
-    list(APPEND HYPRE_CMAKE_OPTIONS -DHYPRE_ENABLE_SINGLE:BOOL=ON)
-  endif()
-  # define external project and create future include directory so it is present
-  # to pass CMake checks at end of MFEM configuration step
-  message(STATUS "Will fetch HYPRE ${HYPRE_FETCH_TAG} to be built with ${HYPRE_CMAKE_OPTIONS}")
-  set(HYPRE_INSTALL ${CMAKE_BINARY_DIR}/fetch/hypre)
-  include(ExternalProject)
-  ExternalProject_Add(hypre
-    GIT_REPOSITORY https://github.com/hypre-space/hypre.git
-    GIT_TAG ${HYPRE_FETCH_TAG}
-    GIT_SHALLOW TRUE
-    GIT_PROGRESS TRUE
-    UPDATE_DISCONNECTED TRUE
-    SOURCE_SUBDIR src
-    PREFIX ${HYPRE_INSTALL}
-    BUILD_COMMAND ${CMAKE_COMMAND} --build . -- -j${CMAKE_BUILD_PARALLEL_LEVEL}
-    CMAKE_CACHE_ARGS -DCMAKE_INSTALL_PREFIX:PATH=${HYPRE_INSTALL} -DCMAKE_INSTALL_LIBDIR:PATH=lib ${HYPRE_CMAKE_OPTIONS})
-  file(MAKE_DIRECTORY ${HYPRE_INSTALL}/include)
-  # set imported library target properties
-  add_dependencies(HYPRE hypre)
-  set_target_properties(HYPRE PROPERTIES
-    IMPORTED_LOCATION ${HYPRE_INSTALL}/lib/libHYPRE.a
-    INTERFACE_INCLUDE_DIRECTORIES ${HYPRE_INSTALL}/include)
-  # convert HYPRE version to integer
-  if (HYPRE_FETCH_TAG MATCHES "^v?([0-9]+)\\.([0-9]+)\\.([0-9]+)$")
-    # Exact release tag X.Y.Z
-    string(REGEX MATCHALL "[0-9]+" HYPRE_SPLIT_VERSION "${HYPRE_FETCH_TAG}")
-  elseif (HYPRE_FETCH_VERSION MATCHES "([0-9]+)\\.([0-9]+)(\\.([0-9]+))?")
-    string(REGEX MATCHALL "[0-9]+" HYPRE_SPLIT_VERSION "${HYPRE_FETCH_VERSION}")
-  else (NOT DEFINED HYPRE_VERSION)
-    message(FATAL_ERROR "Unable to find HYPRE release version. Please provide it via -DHYPRE_VERSION")
-  endif()
-  if (HYPRE_SPLIT_VERSION AND NOT DEFINED HYPRE_VERSION)
-    list(GET HYPRE_SPLIT_VERSION 0 HYPRE_MAJOR_VERSION)
-    list(GET HYPRE_SPLIT_VERSION 1 HYPRE_MINOR_VERSION)
-    if (HYPRE_SPLIT_VERSION GREATER 2)
-      list(GET HYPRE_SPLIT_VERSION 2 HYPRE_PATCH_VERSION)
-    else()
-      set(HYPRE_PATCH_VERSION 0)
-    endif()
-    math(EXPR HYPRE_VERSION "10000*${HYPRE_MAJOR_VERSION} + 100*${HYPRE_MINOR_VERSION} + ${HYPRE_PATCH_VERSION}")
-    set(HYPRE_VERSION ${HYPRE_VERSION} CACHE STRING "HYPRE version." FORCE)
  endif()
  return()
 endif()
@@ -129,20 +27,6 @@ endif()
 include(MfemCmakeUtilities)
 mfem_find_package(HYPRE HYPRE HYPRE_DIR "include" "HYPRE.h" "lib" "HYPRE"
  "Paths to headers required by HYPRE." "Libraries required by HYPRE."
-  CHECK_BUILD HYPRE_USING_CUDA FALSE
-  "
-#undef HYPRE_USING_CUDA
-#include <HYPRE_config.h>
-
-#ifndef HYPRE_USING_CUDA
-#error HYPRE is built without CUDA.
-#endif
-
-int main()
-{
-   return 0;
-}
-"
  CHECK_BUILD HYPRE_USING_HIP FALSE
  "
 #undef HYPRE_USING_HIP
@@ -173,30 +57,11 @@ if (HYPRE_FOUND AND (NOT HYPRE_VERSION))
  endif()
 endif()

-if (HYPRE_FOUND AND HYPRE_USING_CUDA)
-  find_package(CUDAToolkit REQUIRED)
-  # Initialize CUSPARSE_LIBRARIES, CURAND_LIBRARIES, and CUBLAS_LIBRARIES:
-  mfem_culib_set_libraries(CUSPARSE cusparse)
-  mfem_culib_set_libraries(CURAND curand)
-  mfem_culib_set_libraries(CUBLAS cublas)
-  mfem_culib_set_libraries(CUSOLVER cusolver)
-  list(APPEND HYPRE_LIBRARIES ${CUSPARSE_LIBRARIES} ${CURAND_LIBRARIES}
-       ${CUBLAS_LIBRARIES} ${CUSOLVER_LIBRARIES})
-  set(HYPRE_LIBRARIES ${HYPRE_LIBRARIES} CACHE STRING
-      "HYPRE libraries + dependencies." FORCE)
-  message(STATUS "Updated HYPRE_LIBRARIES: ${HYPRE_LIBRARIES}")
-endif()
-
 if (HYPRE_FOUND AND HYPRE_USING_HIP)
  find_package(rocsparse REQUIRED)
  find_package(rocrand REQUIRED)
-  find_package(rocsolver REQUIRED)
-  list(APPEND HYPRE_LIBRARIES ${rocsparse_LIBRARIES} ${rocrand_LIBRARIES} roc::rocsolver roc::rocblas)
+  list(APPEND HYPRE_LIBRARIES ${rocsparse_LIBRARIES} ${rocrand_LIBRARIES})
  set(HYPRE_LIBRARIES ${HYPRE_LIBRARIES} CACHE STRING
      "HYPRE libraries + dependencies." FORCE)
  message(STATUS "Updated HYPRE_LIBRARIES: ${HYPRE_LIBRARIES}")
 endif()
-
-find_package_handle_standard_args(HYPRE
-  REQUIRED_VARS HYPRE_LIBRARIES HYPRE_INCLUDE_DIRS HYPRE_VERSION
-)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,39 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - MAGMA_FOUND
-#   - MAGMA_LIBRARIES
-#   - MAGMA_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-mfem_find_package(MAGMA MAGMA MAGMA_DIR "include" "magma.h" "lib" "magma"
-  "Paths to headers required by MAGMA." "Libraries required by MAGMA.")
-
-if (MAGMA_FOUND AND MFEM_USE_CUDA)
-  find_package(CUDAToolkit REQUIRED)
-  # Initialize CUSPARSE_LIBRARIES and CUBLAS_LIBRARIES:
-  mfem_culib_set_libraries(CUSPARSE cusparse)
-  mfem_culib_set_libraries(CUBLAS cublas)
-  list(APPEND MAGMA_LIBRARIES ${CUSPARSE_LIBRARIES} ${CUBLAS_LIBRARIES})
-  set(MAGMA_LIBRARIES ${MAGMA_LIBRARIES} CACHE STRING
-      "MAGMA libraries + dependencies." FORCE)
-  message(STATUS "Updated MAGMA_LIBRARIES: ${MAGMA_LIBRARIES}")
-endif()
-
-if (MAGMA_FOUND AND MFEM_USE_HIP)
-  find_package(HIPBLAS REQUIRED)
-  find_package(HIPSPARSE REQUIRED)
-  list(APPEND MAGMA_LIBRARIES ${HIPBLAS_LIBRARIES} ${HIPSPARSE_LIBRARIES})
-  set(MAGMA_LIBRARIES ${MAGMA_LIBRARIES} CACHE STRING
-      "MAGMA libraries + dependencies." FORCE)
-  message(STATUS "Updated MAGMA_LIBRARIES: ${MAGMA_LIBRARIES}")
-endif()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -9,39 +9,10 @@
 # terms of the BSD-3 license. We welcome feedback and contributions, see file
 # CONTRIBUTING.md for details.

-# Defines the following variables if fetching of TPLs is disabled (default):
+# Defines the following variables:
 #   - METIS_FOUND
 #   - METIS_LIBRARIES
 #   - METIS_INCLUDE_DIRS
-#   - METIS_VERSION_5
-# otherwise, the following are defined:
-#   - METIS (imported library target)
-#   - METIS_VERSION_5 (cache variable)
-
-if (METIS_FETCH OR FETCH_TPLS)
-  set(METIS_FETCH_VERSION 4.0.3)
-  add_library(METIS STATIC IMPORTED)
-  # define external project
-  message(STATUS "Will fetch METIS ${METIS_FETCH_VERSION} to be built with default options")
-  set(PREFIX ${CMAKE_BINARY_DIR}/fetch/metis)
-  include(ExternalProject)
-  ExternalProject_Add(metis
-    GIT_REPOSITORY https://github.com/mfem/tpls
-    GIT_TAG b60352fbe9675d374b00828055e55be4584c7995 # tag from 1/16/25
-    GIT_SHALLOW TRUE
-    UPDATE_DISCONNECTED TRUE
-    PREFIX ${PREFIX}
-    CONFIGURE_COMMAND tar -xzf ../metis/metis-${METIS_FETCH_VERSION}-mac.tgz --strip=1
-    BUILD_COMMAND $(MAKE) COPTIONS=-Wno-incompatible-pointer-types
-    INSTALL_COMMAND mkdir -p ${PREFIX}/lib && cp libmetis.a ${PREFIX}/lib/)
-  # set imported library target properties
-  add_dependencies(METIS metis)
-  set_target_properties(METIS PROPERTIES
-    IMPORTED_LOCATION ${PREFIX}/lib/libmetis.a)
-  # set cache variables that would otherwise be set after mfem_find_package call
-  set(METIS_VERSION_5 FALSE CACHE BOOL "Is METIS version 5?")
-  return()
-endif()

 include(MfemCmakeUtilities)
 mfem_find_package(METIS METIS METIS_DIR "include;Lib" "metis.h"
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,27 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - MKL_PARDISO_FOUND
-#   - MKL_PARDISO_LIBRARIES
-#   - MKL_PARDISO_INCLUDE_DIRS
-
-if(NOT MKL_LIBRARY_DIR)
-  message(WARNING "Using default MKL library path. Double check the variable MKL_LIBRARY_DIR")
-  set(MKL_LIBRARY_DIR "lib/intel64")
-endif()
-
-include(MfemCmakeUtilities)
-mfem_find_package(MKL_PARDISO MKL_PARDISO
-    MKL_PARDISO_DIR "include" mkl_pardiso.h ${MKL_LIBRARY_DIR} mkl_core
-  "Paths to headers required by MKL Pardiso." "Libraries required by MKL PARDISO."
-  ADD_COMPONENT MKL_LP64 "include" "" ${MKL_LIBRARY_DIR} mkl_intel_lp64
-  ADD_COMPONENT MKL_SEQUENTIAL "include" "" ${MKL_LIBRARY_DIR} mkl_sequential)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -11,39 +11,13 @@

 # Sets the following variables:
 #   - MUMPS_FOUND
-#   - MUMPS_LIBRARIES
 #   - MUMPS_INCLUDE_DIRS
-#   - MUMPS_VERSION
+#   - MUMPS_LIBRARIES

 include(MfemCmakeUtilities)
-
-# Toggle which precision of MUMPS to use depending on the precision of MFEM.
-if (MFEM_USE_DOUBLE)
-  set(_mumps_header dmumps_c.h)
-  set(_mumps_lib dmumps)
-elseif(MFEM_USE_SINGLE)
-  set(_mumps_header smumps_c.h)
-  set(_mumps_lib smumps)
-endif()
-
 mfem_find_package(MUMPS MUMPS MUMPS_DIR
-  "include" ${_mumps_header} "lib" ${_mumps_lib}
+  "include" dmumps_c.h "lib" dmumps
  "Paths to headers required by MUMPS."
  "Libraries required by MUMPS."
-  ADD_COMPONENT mumps_common "include" ${_mumps_header} "lib" mumps_common
-  ADD_COMPONENT pord "include" ${_mumps_header} "lib" pord)
-
-if (MUMPS_FOUND AND (NOT MUMPS_VERSION))
-  try_run(MUMPS_VERSION_RUN_RESULT MUMPS_VERSION_COMPILE_RESULT
-          ${CMAKE_CURRENT_BINARY_DIR}/config
-          ${CMAKE_CURRENT_SOURCE_DIR}/config/get_mumps_version.cpp
-          CMAKE_FLAGS -DINCLUDE_DIRECTORIES:STRING=${MUMPS_INCLUDE_DIRS}
-          RUN_OUTPUT_VARIABLE MUMPS_VERSION_OUTPUT)
-  if ((MUMPS_VERSION_RUN_RESULT EQUAL 0) AND MUMPS_VERSION_OUTPUT)
-    string(STRIP "${MUMPS_VERSION_OUTPUT}" MUMPS_VERSION)
-    set(MUMPS_VERSION ${MUMPS_VERSION} CACHE STRING "MUMPS version." FORCE)
-    message(STATUS "Found MUMPS version ${MUMPS_VERSION}")
-  else()
-    message(FATAL_ERROR "Unable to determine MUMPS version.")
-  endif()
-endif()
+  ADD_COMPONENT mumps_common "include" dmumps_c.h "lib" mumps_common
+  ADD_COMPONENT pord "include" dmumps_c.h "lib" pord)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,17 +14,11 @@
 #   - NETCDF_LIBRARIES
 #   - NETCDF_INCLUDE_DIRS

-# Suppress warning about HDF5_ROOT being set
-if (POLICY CMP0074)
-  cmake_policy(SET CMP0074 NEW)
-endif()
-
 include(MfemCmakeUtilities)

 # FindHDF5.cmake uses HDF5_ROOT, so we "translate" from the MFEM convention
-# (Needed in some cases, e.g. when HDF5_TARGET_NAMES is set and MFEM's
-# FindHDF5.cmake is not used.)
-set(HDF5_ROOT ${HDF5_DIR} CACHE PATH "")
+# (MFEM's FindHDF5.cmake does not need HDF5_ROOT)
+# set(HDF5_ROOT ${HDF5_DIR} CACHE PATH "")

 # We need to guard against the case where HDF5 was already found but without
 # the HL extensions (in which case mfem_find_package will treat the package
@@ -41,11 +35,6 @@ mfem_find_package(NetCDF NETCDF NETCDF_DIR "include" netcdf.h "lib" netcdf
 # The netcdf library will always be the first element of NETCDF_LIBRARIES
 # and we need to insert after that library but before the hdf5 library, so
 # position 1 is used
-# (Needed in some cases, e.g. when HDF5_TARGET_NAMES is set and MFEM's
-# FindHDF5.cmake is not used.)
-if (HDF5_C_LIBRARY_hdf5_hl)
-  list(INSERT NETCDF_LIBRARIES 1 ${HDF5_C_LIBRARY_hdf5_hl})
-  if (NOT NetCDF_FIND_QUIETLY)
-    message(STATUS "Updated NetCDF libraries: ${NETCDF_LIBRARIES}")
-  endif()
-endif()
+# (MFEM's FindHDF5.cmake does not set HDF5_C_LIBRARY_hdf5_hl and the HL library
+# is already added to NETCDF_LIBRARIES)
+# list(INSERT NETCDF_LIBRARIES 1 ${HDF5_C_LIBRARY_hdf5_hl})
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -117,8 +117,8 @@ macro (MULTIPASS_SOURCE_RUNS includes libraries source runs language)
  math (EXPR _tmp "${MULTIPASS_TEST_COUNT} + 1") # Why can't I add to a cache variable?
  set (MULTIPASS_TEST_COUNT ${_tmp} CACHE INTERNAL "Unique test ID")
  set (testname MULTIPASS_TEST_${MULTIPASS_TEST_COUNT}_${runs})
-  set (CMAKE_REQUIRED_INCLUDES ${includes} ${MPI_${language}_INCLUDE_PATH})
-  set (CMAKE_REQUIRED_LIBRARIES ${libraries} ${MPI_${language}_LIBRARIES})
+  set (CMAKE_REQUIRED_INCLUDES ${includes})
+  set (CMAKE_REQUIRED_LIBRARIES ${libraries})
  if(${language} STREQUAL "C")
    check_c_source_runs ("${source}" ${testname})
  elseif(${language} STREQUAL "CXX")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,27 +14,17 @@
 #   - RAJA_LIBRARIES
 #   - RAJA_INCLUDE_DIRS

-if (RAJA_FOUND)
-   return()
+include(MfemCmakeUtilities)
+mfem_find_package(RAJA RAJA RAJA_DIR "include" "RAJA/RAJA.hpp" "lib" "RAJA"
+  "Paths to headers required by RAJA." "Libraries required by RAJA.")
+
+if (NOT RAJA_CONFIG_CMAKE)
+   set(RAJA_CONFIG_CMAKE "${RAJA_DIR}/share/raja/cmake/raja-config.cmake")
 endif()
-message(STATUS "Looking for RAJA ...")
-if (RAJA_DIR)
-   message(STATUS "   in RAJA_DIR = ${RAJA_DIR}")
-   find_package(RAJA CONFIG NO_DEFAULT_PATH PATHS "${RAJA_DIR}")
-endif()
-if (NOT RAJA_FOUND)
-   message(STATUS "   in standard CMake locations")
-   find_package(RAJA CONFIG)
-endif()
-if (RAJA_FOUND)
-   set(RAJA_LIBRARIES "RAJA" CACHE STRING "RAJA imported target." FORCE)
-   set(RAJA_INCLUDE_DIRS "" CACHE STRING "RAJA include dirs (not used)" FORCE)
-   message(STATUS
-      "Found RAJA target: ${RAJA_LIBRARIES} (version: ${RAJA_VERSION})")
-else()
-   set(msg STATUS)
-   if (RAJA_FIND_REQUIRED)
-      set(msg FATAL_ERROR)
+if (EXISTS "${RAJA_CONFIG_CMAKE}")
+   include("${RAJA_CONFIG_CMAKE}")
+   if (ENABLE_CUDA AND NOT MFEM_USE_CUDA)
+      message(FATAL_ERROR
+         "RAJA is built with CUDA: MFEM_USE_CUDA=YES is required")
   endif()
-   message(${msg} "RAJA not found. Please set RAJA_DIR to the RAJA prefix.")
 endif()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,7 +14,7 @@
 #   - SLEPC_INCLUDE_DIRS
 #   - SLEPC_LIBRARIES

-set(SLEPc_REQUIRED_PACKAGES "PETSC" "MPI" CACHE STRING
+set(SLEPc_REQUIRED_PACKAGES "PETSC" CACHE STRING
  "Additional packages required by SLEPc")

 include(MfemCmakeUtilities)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -22,8 +22,8 @@ mfem_find_package(SUNDIALS SUNDIALS SUNDIALS_DIR
    "include" nvector/nvector_serial.h "lib" sundials_nvecserial
  ADD_COMPONENT NVector_Cuda
    "include" nvector/nvector_cuda.h "lib" sundials_nveccuda
-  ADD_COMPONENT NVector_Hip
-    "include" nvector/nvector_hip.h "lib" sundials_nvechip
+  ADD_COMPONENT NVector_ParHyp
+    "include" nvector/nvector_parhyp.h "lib" sundials_nvecparhyp
  ADD_COMPONENT NVector_Parallel
    "include" nvector/nvector_parallel.h "lib" sundials_nvecparallel
  ADD_COMPONENT NVector_MPIPlusX
@@ -31,5 +31,4 @@ mfem_find_package(SUNDIALS SUNDIALS SUNDIALS_DIR
  ADD_COMPONENT CVODE "include" cvode/cvode.h "lib" sundials_cvode
  ADD_COMPONENT CVODES "include" cvodes/cvodes.h "lib" sundials_cvodes
  ADD_COMPONENT ARKODE "include" arkode/arkode.h "lib" sundials_arkode
-  ADD_COMPONENT KINSOL "include" kinsol/kinsol.h "lib" sundials_kinsol
-  ADD_COMPONENT Core "include" sundials/sundials_core.h "lib" sundials_core)
+  ADD_COMPONENT KINSOL "include" kinsol/kinsol.h "lib" sundials_kinsol)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,22 +0,0 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
-# at the Lawrence Livermore National Laboratory. All Rights reserved. See files
-# LICENSE and NOTICE for details. LLNL-CODE-806117.
-#
-# This file is part of the MFEM library. For more information and source code
-# availability visit https://mfem.org.
-#
-# MFEM is free software; you can redistribute it and/or modify it under the
-# terms of the BSD-3 license. We welcome feedback and contributions, see file
-# CONTRIBUTING.md for details.
-
-# Defines the following variables:
-#   - TRIBOL_FOUND
-#   - TRIBOL_LIBRARIES
-#   - TRIBOL_INCLUDE_DIRS
-
-include(MfemCmakeUtilities)
-# Note: components are enabled based on the find_package() parameters.
-mfem_find_package(Tribol TRIBOL TRIBOL_DIR "include" tribol/config.hpp "lib" tribol
-  "Paths to headers required by Tribol." "Libraries required by Tribol."
-  ADD_COMPONENT redecomp
-    "include" redecomp/redecomp.hpp "lib" redecomp)
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -14,23 +14,6 @@
 #   - UMPIRE_LIBRARIES
 #   - UMPIRE_INCLUDE_DIRS

-if (NOT umpire_DIR AND UMPIRE_DIR)
-  set(umpire_DIR ${UMPIRE_DIR}/lib/cmake/umpire)
-endif()
-message(STATUS "Looking for UMPIRE ...")
-message(STATUS "   in UMPIRE_DIR = ${UMPIRE_DIR}")
-message(STATUS "      umpire_DIR = ${umpire_DIR}")
-find_package(umpire CONFIG)
+find_package(umpire REQUIRED CONFIG)
 set(UMPIRE_FOUND ${umpire_FOUND})
 set(UMPIRE_LIBRARIES "umpire")
-if (UMPIRE_FOUND)
-  message(STATUS
-    "Found UMPIRE target: ${UMPIRE_LIBRARIES} (version: ${umpire_VERSION})")
-else()
-  set(msg STATUS)
-  if (UMPIRE_FIND_REQUIRED)
-    set(msg FATAL_ERROR)
-  endif()
-  message(${msg}
-    "UMPIRE not found. Please set UMPIRE_DIR to the install prefix.")
-endif()
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -103,6 +103,25 @@ macro(add_mfem_examples EXE_SRCS)
      ${MFEM_EXEC_PREREQUISITES_TARGET_NAME} ${EXE_PREREQUISITE})

    target_link_libraries(${EXE_NAME} mfem)
+    if (MFEM_USE_MPI)
+      # Not needed: (mfem already links with MPI_CXX_LIBRARIES)
+      # target_link_libraries(${EXE_NAME} ${MPI_CXX_LIBRARIES})
+
+      # Language-specific include directories:
+      if (MPI_CXX_INCLUDE_PATH)
+        target_include_directories(${EXE_NAME} PRIVATE "${MPI_CXX_INCLUDE_PATH}")
+      endif()
+      if (MPI_CXX_COMPILE_FLAGS)
+        separate_arguments(MPI_CXX_COMPILE_ARGS UNIX_COMMAND
+          "${MPI_CXX_COMPILE_FLAGS}")
+        target_compile_options(${EXE_NAME} PRIVATE ${MPI_CXX_COMPILE_ARGS})
+      endif()
+
+      if (MPI_CXX_LINK_FLAGS)
+        set_target_properties(${EXE_NAME} PROPERTIES
+          LINK_FLAGS "${MPI_CXX_LINK_FLAGS}")
+      endif()
+    endif()
  endforeach(SRC_FILE)
 endmacro()

@@ -123,18 +142,21 @@ macro(add_mfem_miniapp MFEM_EXE_NAME)

  # If CUDA is enabled, tag source files to be compiled with nvcc.
  if (MFEM_USE_CUDA)
-    set_source_files_properties(${MAIN_LIST} ${EXTRA_SOURCES_LIST}
-      PROPERTIES LANGUAGE CUDA)
-    if (MFEM_CUDA_COMPILER_IS_NVCC)
+    set_source_files_properties(${MAIN_LIST} ${EXTRA_SOURCES_LIST} PROPERTIES LANGUAGE CUDA)
+    if (CMAKE_VERSION VERSION_GREATER_EQUAL 3.12.0)
      list(TRANSFORM EXTRA_OPTIONS_LIST PREPEND "-Xcompiler=")
+    else()
+      set(LIST_)
+      foreach(item IN LISTS EXTRA_OPTIONS_LIST)
+        list(APPEND LIST_ "-Xcompiler=${item}")
+      endforeach()
+      set(EXTRA_OPTIONS_LIST ${LIST_})
    endif()
  endif()

  # Actually add the executable
  mfem_add_executable(${MFEM_EXE_NAME} ${MAIN_LIST}
      ${EXTRA_SOURCES_LIST} ${EXTRA_HEADERS_LIST})
-  install(TARGETS ${MFEM_EXE_NAME}
-          RUNTIME DESTINATION miniapps)
  add_dependencies(${MFEM_ALL_MINIAPPS_TARGET_NAME} ${MFEM_EXE_NAME})
  add_dependencies(${MFEM_EXE_NAME} ${MFEM_EXEC_PREREQUISITES_TARGET_NAME})

@@ -150,20 +172,25 @@ macro(add_mfem_miniapp MFEM_EXE_NAME)
  if (EXTRA_DEFINES_LIST)
    target_compile_definitions(${MFEM_EXE_NAME} PRIVATE ${EXTRA_DEFINES_LIST})
  endif()
-endmacro()

-# Macro for setting variables like '<culib>_LIBRARIES' where <culib> is a CUDA
-# library like cublas. This macro assumes that the CUDAToolkit module was loaded
-# successfully. Example usage:
-#   mfem_culib_set_libraries(CUBLAS cublas)
-macro(mfem_culib_set_libraries _CULIB _culib)
-  # The following command does not work with older CMake versions, e.g. 3.20:
-  #   get_target_property(${_CULIB}_LIBRARIES CUDA::${_culib} LOCATION)
-  # Therefore, we use the respective internal variable:
-  set(${_CULIB}_LIBRARIES ${CUDA_${_culib}_LIBRARY})
-  if (NOT ${_CULIB}_LIBRARIES)
-    message(FATAL_ERROR
-      "Error setting ${_CULIB}_LIBRARIES: ${${_CULIB}_LIBRARIES}")
+  # Handle the MPI separately
+  if (MFEM_USE_MPI)
+    # Add MPI_CXX_LIBRARIES, in case this target does not link with mfem.
+    target_link_libraries(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_LIBRARIES})
+
+    if (MPI_CXX_INCLUDE_PATH)
+      target_include_directories(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_INCLUDE_PATH})
+    endif()
+    if (MPI_CXX_COMPILE_FLAGS)
+      separate_arguments(MPI_CXX_COMPILE_ARGS UNIX_COMMAND
+        "${MPI_CXX_COMPILE_FLAGS}")
+      target_compile_options(${MFEM_EXE_NAME} PRIVATE ${MPI_CXX_COMPILE_ARGS})
+    endif()
+
+    if (MPI_CXX_LINK_FLAGS)
+      set_target_properties(${MFEM_EXE_NAME} PROPERTIES
+        LINK_FLAGS "${MPI_CXX_LINK_FLAGS}")
+    endif()
  endif()
 endmacro()

@@ -409,9 +436,9 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
              break()
            endif()
          endforeach()
-          if (Required AND NOT ${ReqPack}_FOUND)
+          if (${Required} AND NOT ${ReqPack}_FOUND)
            message(FATAL_ERROR " *** Required package ${ReqPack} not found."
-              " Checked target names: ${ReqPack} ${${ReqPack}_TARGET_NAMES}")
+              "Checked target names: ${ReqPack} ${${ReqPack}_TARGET_NAMES}")
          endif()
        endif()
      endif()
@@ -477,18 +504,14 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
          endif()
          get_target_property(IsImported ${TargetName} IMPORTED)
          if (IsImported)
-            get_target_property(ImpConfigs ${TargetName} IMPORTED_CONFIGURATIONS)
-            # message(STATUS "${ReqPack} imported configs: ${ImpConfigs}")
            set(ImportConfig ${${ReqPack}_IMPORT_CONFIG})
            if (NOT ImportConfig)
              set(ImportConfig RELEASE)
-              list(FIND ImpConfigs ${ImportConfig} _Index)
-              if (_Index EQUAL -1)
-                list(GET ImpConfigs 0 ImportConfig)
-              endif()
            endif()
            set(ImportConfigSuffix "_${ImportConfig}")
-            if ((NOT ImportConfig) OR ("${ImportConfig}" STREQUAL "NO_CONFIG"))
+            get_target_property(ImpConfigs ${TargetName} IMPORTED_CONFIGURATIONS)
+            list(FIND ImpConfigs ${ImportConfig} _Index)
+            if ((_Index EQUAL -1) OR ("${ImportConfig}" STREQUAL "NO_CONFIG"))
              set(ImportConfig "NO_CONFIG")
              set(ImportConfigSuffix "")
              # message(FATAL_ERROR " *** ${ReqPack}: configuration "
@@ -506,8 +529,7 @@ function(mfem_find_package Name Prefix DirVar IncSuffixes Header LibSuffixes
          else()
            # Set _Pack_LIBS from the target properties for ImportConfig
            foreach (_prop IMPORTED_LOCATION${ImportConfigSuffix}
-                IMPORTED_LINK_INTERFACE_LIBRARIES${ImportConfigSuffix}
-                INTERFACE_LINK_LIBRARIES)
+                IMPORTED_LINK_INTERFACE_LIBRARIES${ImportConfigSuffix})
              get_target_property(_value ${TargetName} ${_prop})
              if (_value)
                list(APPEND _Pack_LIBS ${_value})
@@ -718,7 +740,7 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
  get_target_property(IsImported ${tgt} IMPORTED)
  # message(STATUS "${tgt}[IMPORTED]: ${IsImported}")
  # Generally, the possible target types are: STATIC_LIBRARY, MODULE_LIBRARY,
-  # SHARED_LIBRARY, INTERFACE_LIBRARY, UNKNOWN_LIBRARY, EXECUTABLE.
+  # SHARED_LIBRARY, INTERFACE_LIBRARY, EXECUTABLE.
  get_target_property(type ${tgt} TYPE)
  # message(STATUS "${tgt}[TYPE]: ${type}")
  unset(ImportConfig)
@@ -758,7 +780,6 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
      list(APPEND CompileOpts "-isystem \"${SysDir}\"")
    endforeach()
  endif()
-  set(AddInterfaceLinkLibs TRUE)
  if ("${type}" STREQUAL "STATIC_LIBRARY")
    get_target_property(Location ${tgt} LOCATION)
    if (Location)
@@ -766,7 +787,7 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
    else()
      message(STATUS " *** Warning: [${tgt}] LOCATION not defined!")
    endif()
-  elseif ("${type}" STREQUAL "SHARED_LIBRARY" OR "${type}" STREQUAL "UNKNOWN_LIBRARY")
+  elseif ("${type}" STREQUAL "SHARED_LIBRARY")
    get_target_property(Location ${tgt} LOCATION)
    if (Location)
      get_filename_component(Dir ${Location} DIRECTORY)
@@ -780,27 +801,11 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
      message(STATUS " *** Warning: [${tgt}] LOCATION not defined!")
    endif()
  elseif ("${type}" STREQUAL "INTERFACE_LIBRARY")
-    # The INTERFACE_LINK_LIBRARIES property is handled below.
-    # Other properties we may need to handle:
-    # INTERFACE_LINK_DEPENDS
-    # INTERFACE_LINK_DIRECTORIES
-    # INTERFACE_LINK_OPTIONS
-  else()
-    message(STATUS " *** Warning: [${tgt}] uses target type '${type}'"
-      " which is not supported!")
-    set(AddInterfaceLinkLibs FALSE)
-  endif()
-  if (AddInterfaceLinkLibs)
    get_target_property(Libs ${tgt} INTERFACE_LINK_LIBRARIES)
-    # message(STATUS "${tgt}[INTERFACE_LINK_LIBRARIES]: ${Libs}")
    if (Libs)
      foreach(Lib ${Libs})
        if (NOT (TARGET ${Lib}))
-          # message(STATUS "Lib = ${Lib}")
-          # Filter-out generator expressions
-          if (NOT ("${Lib}" MATCHES "^\\$"))
-            list(APPEND LinkOpts "${Lib}")
-          endif()
+          list(APPEND LinkOpts "${Lib}")
        else()
          mfem_get_target_options(${Lib} COpts LOpts)
          list(APPEND CompileOpts ${COpts})
@@ -808,6 +813,13 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
        endif()
      endforeach()
    endif()
+    # Other properties we may need to handle:
+    # INTERFACE_LINK_DEPENDS
+    # INTERFACE_LINK_DIRECTORIES
+    # INTERFACE_LINK_OPTIONS
+  else()
+    message(STATUS " *** Warning: [${tgt}] uses target type '${type}'"
+      " which is not supported!")
  endif()

  # Other potentially relevant properties:
@@ -831,26 +843,9 @@ function(mfem_get_target_options Target CompileOptsVar LinkOptsVar)
  set(${CompileOptsVar} "${CompileOpts}" PARENT_SCOPE)
  set(${LinkOptsVar} "${LinkOpts}" PARENT_SCOPE)

-  # message(STATUS "${tgt}[CompileOpts]: ${CompileOpts}")
-  # message(STATUS "${tgt}[LinkOpts]: ${LinkOpts}")
-
 endfunction(mfem_get_target_options)


-#
-# If ${Path} is not an absolute path, assign ${Prefix}/${Path} to the variable
-# ${OutVar}. If ${Path} is an absolute path, assign ${Path} to the variable
-# ${OutVar}.
-#
-function(mfem_path_to_fullpath Path Prefix OutVar)
-  if(IS_ABSOLUTE "${Path}")
-    set(${OutVar} "${Path}" PARENT_SCOPE)
-  else()
-    set(${OutVar} "${Prefix}/${Path}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-
 #
 #   Function that creates 'config.mk' from 'config.mk.in' for the both the
 #   build- and the install-locations and define install rules for 'config.mk'
@@ -868,19 +863,17 @@ function(mfem_export_mk_files)

  # Convert Boolean vars to YES/NO without writing the values to cache
  set(CONFIG_MK_BOOL_VARS MFEM_USE_MPI MFEM_USE_METIS MFEM_USE_METIS_5
-      MFEM_USE_SINGLE MFEM_USE_DOUBLE MFEM_DEBUG MFEM_USE_EXCEPTIONS
-      MFEM_USE_ZLIB MFEM_USE_LIBUNWIND MFEM_USE_LAPACK MFEM_THREAD_SAFE
-      MFEM_USE_LEGACY_OPENMP MFEM_USE_OPENMP MFEM_USE_MEMALLOC MFEM_USE_SUNDIALS
-      MFEM_USE_SUITESPARSE MFEM_USE_SUPERLU MFEM_USE_SUPERLU5 MFEM_USE_MUMPS
-      MFEM_USE_STRUMPACK MFEM_USE_GINKGO MFEM_USE_AMGX MFEM_USE_MAGMA
-      MFEM_USE_GNUTLS MFEM_USE_NETCDF MFEM_USE_PETSC MFEM_USE_SLEPC
-      MFEM_USE_MPFR MFEM_USE_SIDRE MFEM_USE_FMS MFEM_USE_CONDUIT MFEM_USE_PUMI
-      MFEM_USE_HIOP MFEM_USE_GSLIB MFEM_USE_CUDA MFEM_USE_HIP MFEM_USE_RAJA
-      MFEM_USE_OCCA MFEM_USE_CEED MFEM_USE_CALIPER MFEM_USE_UMPIRE MFEM_USE_SIMD
-      MFEM_USE_ADIOS2 MFEM_USE_MKL_CPARDISO MFEM_USE_MKL_PARDISO
+      MFEM_DEBUG MFEM_USE_EXCEPTIONS MFEM_USE_ZLIB MFEM_USE_LIBUNWIND
+      MFEM_USE_LAPACK MFEM_THREAD_SAFE MFEM_USE_LEGACY_OPENMP MFEM_USE_OPENMP
+      MFEM_USE_MEMALLOC MFEM_USE_SUNDIALS MFEM_USE_SUITESPARSE
+      MFEM_USE_SUPERLU MFEM_USE_SUPERLU5 MFEM_USE_MUMPS MFEM_USE_STRUMPACK
+      MFEM_USE_GINKGO MFEM_USE_AMGX MFEM_USE_GNUTLS MFEM_USE_NETCDF
+      MFEM_USE_PETSC MFEM_USE_SLEPC MFEM_USE_MPFR MFEM_USE_SIDRE MFEM_USE_FMS
+      MFEM_USE_CONDUIT MFEM_USE_PUMI MFEM_USE_HIOP MFEM_USE_GSLIB MFEM_USE_CUDA
+      MFEM_USE_HIP MFEM_USE_RAJA MFEM_USE_OCCA MFEM_USE_CEED MFEM_USE_CALIPER
+      MFEM_USE_UMPIRE MFEM_USE_SIMD MFEM_USE_ADIOS2 MFEM_USE_MKL_CPARDISO
      MFEM_USE_ADFORWARD MFEM_USE_CODIPACK MFEM_USE_BENCHMARK MFEM_USE_PARELAG
-      MFEM_USE_TRIBOL MFEM_USE_MOONOLITH MFEM_USE_ALGOIM MFEM_USE_ENZYME
-      MFEM_USE_HDF5)
+      MFEM_USE_MOONOLITH MFEM_USE_ALGOIM MFEM_USE_ENZYME)
  foreach(var ${CONFIG_MK_BOOL_VARS})
    if (${var})
      set(${var} YES)
@@ -901,7 +894,7 @@ function(mfem_export_mk_files)
         "${cxx_std_flag} ${CMAKE_CXX_FLAGS_${BUILD_TYPE}} ${CMAKE_CXX_FLAGS}"
         MFEM_CXXFLAGS)
  set(MFEM_TPLFLAGS "")
-  foreach(dir ${TPL_INCLUDE_DIRS})
+  foreach(dir ${MFEM_TPL_INCLUDE_DIRS})
    set(MFEM_TPLFLAGS "${MFEM_TPLFLAGS} -I${dir}")
  endforeach()
  # TODO: MFEM_TPLFLAGS: add other TPL flags, in addition to the -I flags.
@@ -932,14 +925,12 @@ function(mfem_export_mk_files)
  endif()
  set(MFEM_BUILD_TAG "${CMAKE_SYSTEM}")
  set(MFEM_PREFIX "${CMAKE_INSTALL_PREFIX}")
-  # For the next 4 variables, these are the values for the build-tree version of
+  # For the next 4 variable, these are the values for the build-tree version of
  # 'config.mk'
  set(MFEM_INC_DIR "${PROJECT_BINARY_DIR}")
  set(MFEM_LIB_DIR "${PROJECT_BINARY_DIR}")
  set(MFEM_TEST_MK "${PROJECT_SOURCE_DIR}/config/test.mk")
  set(MFEM_CONFIG_EXTRA "MFEM_BUILD_DIR ?= ${PROJECT_BINARY_DIR}")
-  # TODO: CUDA/HIP support:
-  set(MFEM_XLINKER "${CMAKE_CXX_LINKER_WRAPPER_FLAG}")
  set(MFEM_MPIEXEC ${MPIEXEC})
  if (NOT MFEM_MPIEXEC)
    set(MFEM_MPIEXEC "mpirun")
@@ -1020,12 +1011,9 @@ function(mfem_export_mk_files)
    "${PROJECT_BINARY_DIR}/config/test.mk" COPYONLY)

  # Update variables for the install-tree version of 'config.mk'
-  mfem_path_to_fullpath(
-    "${INSTALL_INCLUDE_DIR}" "${CMAKE_INSTALL_PREFIX}" MFEM_INC_DIR)
-  mfem_path_to_fullpath(
-    "${INSTALL_LIB_DIR}" "${CMAKE_INSTALL_PREFIX}" MFEM_LIB_DIR)
-  mfem_path_to_fullpath(
-    "${INSTALL_SHARE_DIR}/mfem/test.mk" "${CMAKE_INSTALL_PREFIX}" MFEM_TEST_MK)
+  set(MFEM_INC_DIR "${CMAKE_INSTALL_PREFIX}/include")
+  set(MFEM_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib")
+  set(MFEM_TEST_MK "${CMAKE_INSTALL_PREFIX}/share/mfem/test.mk")
  set(MFEM_CONFIG_EXTRA "")

  # Create the install-tree version of 'config.mk'
@@ -1035,30 +1023,8 @@ function(mfem_export_mk_files)

  # Install rules for 'config.mk' and 'test.mk'
  install(FILES ${PROJECT_SOURCE_DIR}/config/test.mk
-    DESTINATION ${INSTALL_SHARE_DIR}/mfem/)
+    DESTINATION ${CMAKE_INSTALL_PREFIX}/share/mfem/)
  install(FILES ${PROJECT_BINARY_DIR}/config/config-install.mk
-    DESTINATION ${INSTALL_SHARE_DIR}/mfem/
-    RENAME config.mk)
+    DESTINATION ${CMAKE_INSTALL_PREFIX}/share/mfem/ RENAME config.mk)

 endfunction()
-
-
-#
-# Function similar to the macro _GNUInstallDirs_cache_path from the module
-# GNUInstallDirs. Used to process variables like INSTALL_LIB_DIR if they are
-# set on the cmake command line without specifying type: -DINSTALL_LIB_DIR=lib.
-# Without this special treatment, relative paths are expanded to full paths
-# and we want to avoid that.
-#
-function(mfem_cache_path PathVar DefaultPath HelpStr)
-  if(NOT DEFINED ${PathVar})
-    set(${PathVar} "${DefaultPath}" CACHE PATH "${HelpStr}")
-  endif()
-  get_property(cache_type CACHE ${PathVar} PROPERTY TYPE)
-  if(cache_type STREQUAL "UNINITIALIZED")
-    file(TO_CMAKE_PATH "${${PathVar}}" cmakepath)
-    set_property(CACHE ${PathVar} PROPERTY TYPE PATH)
-    set_property(CACHE ${PathVar} PROPERTY VALUE "${cmakepath}")
-    set_property(CACHE ${PathVar} PROPERTY HELPSTRING "${HelpStr}")
-  endif()
-endfunction()
@@ -93,17 +93,17 @@ macro (RESOLVE_LIBRARIES LIBS LINK_LINE)
        set (_directory_list ${_directory_list} ${libpath})
        set (token ${libname})
      endif (token MATCHES "^/")
-      set (_lib "NOTFOUND")
+      set (_lib "NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
      find_library (_lib ${token} HINTS ${_directory_list} ${_root})
      if (_lib)
-        string (REPLACE "//" "/" _lib ${_lib})
+	string (REPLACE "//" "/" _lib ${_lib})
        list (APPEND _libs_found ${_lib})
      else (_lib)
        message (STATUS "Unable to find library ${token}")
      endif (_lib)
-      unset(_lib CACHE)
    endif (token MATCHES "-L([^\" ]+|\"[^\"]+\")")
  endforeach (token)
+  set (_lib "NOTFOUND" CACHE INTERNAL "Scratch variable" FORCE)
  # only the LAST occurrence of each library is required since there should be no circular dependencies
  if (_libs_found)
    list (REVERSE _libs_found)
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -23,65 +23,6 @@
 #include "_config.hpp"
 #endif

-#include <cstdint>
-#include <climits>
-
-namespace mfem
-{
-
-#if (defined(MFEM_USE_CUDA) && defined(__CUDACC__)) || \
-    (defined(MFEM_USE_HIP) && defined(__HIP__))
-#define MFEM_HOST_DEVICE __host__ __device__
-#else
-#define MFEM_HOST_DEVICE
-#endif
-
-// MFEM precision configuration
-
-#if defined MFEM_USE_SINGLE && defined MFEM_USE_DOUBLE
-#error "DOUBLE and SINGLE precision cannot both be specified"
-#endif
-
-#ifdef MFEM_USE_SINGLE
-typedef float real_t;
-#elif defined MFEM_USE_DOUBLE
-typedef double real_t;
-#else
-#error "Either DOUBLE or SINGLE precision must be specified"
-#endif
-
-MFEM_HOST_DEVICE
-constexpr real_t operator""_r(long double v)
-{
-   return static_cast<real_t>(v);
-}
-
-MFEM_HOST_DEVICE
-constexpr real_t operator""_r(unsigned long long v)
-{
-   return static_cast<real_t>(v);
-}
-
-} // namespace mfem
-
-// Return value for main function in examples that should be skipped by testing
-// in some case. This return value prevents failures in testing.
-#define MFEM_SKIP_RETURN_VALUE 242
-
-// Request a global object to be instantiated for each thread in its TLS.
-#define MFEM_THREAD_LOCAL thread_local
-
-// MFEM_DEPRECATED macro to mark obsolete functions and methods
-// see https://stackoverflow.com/questions/295120/c-mark-as-deprecated
-#if defined(__GNUC__) || defined(__clang__)
-#define MFEM_DEPRECATED __attribute__((deprecated))
-#elif defined(_MSC_VER)
-#define MFEM_DEPRECATED __declspec(deprecated)
-#else
-#pragma message("WARNING: You need to implement MFEM_DEPRECATED for this compiler")
-#define MFEM_DEPRECATED
-#endif
-
 // Common configuration macros

 #if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 7)) || defined(__clang__)
@@ -89,30 +30,11 @@ constexpr real_t operator""_r(unsigned long long v)
 #endif

 // Windows specific options
-#if defined(_WIN32) && !defined(_USE_MATH_DEFINES)
+#ifdef _WIN32
+#ifndef _USE_MATH_DEFINES
 // Macro needed to get defines like M_PI from <cmath>. (Visual Studio C++ only?)
 #define _USE_MATH_DEFINES
 #endif
-// Macro MFEM_EXPORT: this macro is used when declaring exported global
-// variables and static class variables in public header files, e.g.:
-//    extern MFEM_EXPORT Geometry Geometries;
-//    static MFEM_EXPORT Device device_singleton;
-// In cases where a class contains multiple static variables, instead of marking
-// all such variables with MFEM_EXPORT, one can mark the class with MFEM_EXPORT,
-// e.g.:
-//    class MFEM_EXPORT MemoryManager ...
-// Note: MFEM's GitHub CI includes a shared MSVC build that will fail if a
-// variable that needs MFEM_EXPORT does not have it. However, builds with
-// optional external libraries are not tested and may require separate checks to
-// determine the necessity of MFEM_EXPORT.
-#if defined(_MSC_VER) && defined(MFEM_SHARED_BUILD)
-#ifdef mfem_EXPORTS
-#define MFEM_EXPORT __declspec(dllexport)
-#else
-#define MFEM_EXPORT __declspec(dllimport)
-#endif
-#else
-#define MFEM_EXPORT
 #endif
 // On Cygwin the option -std=c++11 prevents the definition of M_PI. Defining
 // the following macro allows us to get M_PI and some needed functions, e.g.
@@ -123,15 +45,6 @@ constexpr real_t operator""_r(unsigned long long v)

 // Check dependencies:

-// Define MFEM_MPI_REAL_T to be the appropriate MPI real type
-#ifdef MFEM_USE_MPI
-#ifdef MFEM_USE_SINGLE
-#define MFEM_MPI_REAL_T MPI_FLOAT
-#elif defined MFEM_USE_DOUBLE
-#define MFEM_MPI_REAL_T MPI_DOUBLE
-#endif
-#endif
-
 // Options that require MPI
 #ifndef MFEM_USE_MPI
 #ifdef MFEM_USE_SUPERLU
@@ -1,4 +1,4 @@
-// Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+// Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 // at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 // LICENSE and NOTICE for details. LLNL-CODE-806117.
 //
@@ -30,28 +30,19 @@
 #define MFEM_VERSION_MINOR (((MFEM_VERSION)/100)%100)
 #define MFEM_VERSION_PATCH ((MFEM_VERSION)%100)

-// The absolute path of the MFEM source prefix.
+// The absolute path of the MFEM source prefix
 // #define MFEM_SOURCE_DIR "@MFEM_SOURCE_DIR@"

-// The absolute path of the MFEM installation prefix.
+// The absolute path of the MFEM installation prefix
 // #define MFEM_INSTALL_DIR "@MFEM_INSTALL_DIR@"

 // Description of the git commit used to build MFEM.
 // #define MFEM_GIT_STRING "@MFEM_GIT_STRING@"

-// Enable shared library build of MFEM.
-// #define MFEM_SHARED_BUILD
-
 // Build the parallel MFEM library.
 // Requires an MPI compiler, and the libraries HYPRE and METIS.
 // #define MFEM_USE_MPI

-// Use double-precision floating point type
-// #define MFEM_USE_DOUBLE
-
-// Use single-precision floating point type
-// #define MFEM_USE_SINGLE
-
 // Enable debug checks in MFEM.
 // #define MFEM_DEBUG

@@ -97,7 +88,7 @@
 // Enable MFEM functionality based on the SuiteSparse library.
 // #define MFEM_USE_SUITESPARSE

-// Enable MFEM functionality based on the SuperLU_DIST library.
+// Enable MFEM functionality based on the SuperLU library.
 // #define MFEM_USE_SUPERLU
 // #define MFEM_USE_SUPERLU5

@@ -108,46 +99,40 @@
 // Enable MFEM functionality based on the STRUMPACK library.
 // #define MFEM_USE_STRUMPACK

-// Enable MFEM features based on the Ginkgo library.
+// Enable MFEM features based on the Ginkgo library
 // #define MFEM_USE_GINKGO

 // Enable MFEM functionality based on the AmgX library.
 // #define MFEM_USE_AMGX

-// Enable MFEM functionality based on the MAGMA library.
-// #define MFEM_USE_MAGMA
-
-// Enable secure socket streams based on the GNUTLS library.
+// Enable secure socket streams based on the GNUTLS library
 // #define MFEM_USE_GNUTLS

-// Enable Sidre support.
+// Enable Sidre support
 // #define MFEM_USE_SIDRE

-// Enable the use of SIMD in the high performance templated classes.
+// Enable the use of SIMD in the high performance templated classes
 // #define MFEM_USE_SIMD

-// Enable FMS support.
+// Enable FMS support
 // #define MFEM_USE_FMS

-// Enable Conduit support.
+// Enable Conduit support
 // #define MFEM_USE_CONDUIT

-// Enable functionality based on the HDF5 library
-// #define MFEM_USE_HDF5
-
-// Enable functionality based on the NetCDF library (reading CUBIT files).
+// Enable functionality based on the NetCDF library (reading CUBIT files)
 // #define MFEM_USE_NETCDF

-// Enable functionality based on the PETSc library.
+// Enable functionality based on the PETSc library
 // #define MFEM_USE_PETSC

-// Enable functionality based on the SLEPc library.
+// Enable functionality based on the SLEPc library
 // #define MFEM_USE_SLEPC

 // Enable functionality based on the MPFR library.
 // #define MFEM_USE_MPFR

-// Enable MFEM functionality based on the PUMI library.
+// Enable MFEM functionality based on the PUMI library
 // #define MFEM_USE_PUMI

 // Enable Moonolith-based general interpolation between finite element spaces.
@@ -156,7 +141,7 @@
 // Enable MFEM functionality based on the HIOP library.
 // #define MFEM_USE_HIOP

-// Enable MFEM functionality based on the GSLIB library.
+// Enable MFEM functionality based on the GSLIB library
 // #define MFEM_USE_GSLIB

 // Build the NVIDIA GPU/CUDA-enabled version of the MFEM library.
@@ -198,13 +183,10 @@
 // Enable interface to the MKL CPardiso library.
 // #define MFEM_USE_MKL_CPARDISO

-// Enable interface to the MKL Pardiso library.
-// #define MFEM_USE_MKL_PARDISO
-
-// Use forward mode for automatic differentiation.
+// Use forward mode for automatic differentiation
 // #define MFEM_USE_ADFORWARD

-// Enable the use of the CoDiPack library for AD.
+// Enable the use of the CoDiPack library for AD
 // #define MFEM_USE_CODIPACK

 // Enable functionality based on the Google Benchmark library.
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -18,8 +18,6 @@ MFEM_GIT_STRING        = @MFEM_GIT_STRING@
 MFEM_USE_MPI           = @MFEM_USE_MPI@
 MFEM_USE_METIS         = @MFEM_USE_METIS@
 MFEM_USE_METIS_5       = @MFEM_USE_METIS_5@
-MFEM_USE_DOUBLE        = @MFEM_USE_DOUBLE@
-MFEM_USE_SINGLE        = @MFEM_USE_SINGLE@
 MFEM_DEBUG             = @MFEM_DEBUG@
 MFEM_USE_EXCEPTIONS    = @MFEM_USE_EXCEPTIONS@
 MFEM_USE_ZLIB          = @MFEM_USE_ZLIB@
@@ -38,9 +36,7 @@ MFEM_USE_MUMPS         = @MFEM_USE_MUMPS@
 MFEM_USE_STRUMPACK     = @MFEM_USE_STRUMPACK@
 MFEM_USE_GINKGO        = @MFEM_USE_GINKGO@
 MFEM_USE_AMGX          = @MFEM_USE_AMGX@
-MFEM_USE_MAGMA         = @MFEM_USE_MAGMA@
 MFEM_USE_GNUTLS        = @MFEM_USE_GNUTLS@
-MFEM_USE_HDF5          = @MFEM_USE_HDF5@
 MFEM_USE_NETCDF        = @MFEM_USE_NETCDF@
 MFEM_USE_PETSC         = @MFEM_USE_PETSC@
 MFEM_USE_SLEPC         = @MFEM_USE_SLEPC@
@@ -61,13 +57,11 @@ MFEM_USE_UMPIRE        = @MFEM_USE_UMPIRE@
 MFEM_USE_SIMD          = @MFEM_USE_SIMD@
 MFEM_USE_ADIOS2        = @MFEM_USE_ADIOS2@
 MFEM_USE_MKL_CPARDISO  = @MFEM_USE_MKL_CPARDISO@
-MFEM_USE_MKL_PARDISO   = @MFEM_USE_MKL_PARDISO@
 MFEM_USE_MOONOLITH     = @MFEM_USE_MOONOLITH@
 MFEM_USE_ADFORWARD     = @MFEM_USE_ADFORWARD@
 MFEM_USE_CODIPACK      = @MFEM_USE_CODIPACK@
 MFEM_USE_BENCHMARK     = @MFEM_USE_BENCHMARK@
 MFEM_USE_PARELAG       = @MFEM_USE_PARELAG@
-MFEM_USE_TRIBOL        = @MFEM_USE_TRIBOL@
 MFEM_USE_ENZYME        = @MFEM_USE_ENZYME@

 # Compiler, compile options, and link options
@@ -88,7 +82,6 @@ MFEM_BUILD_TAG = @MFEM_BUILD_TAG@
 MFEM_PREFIX    = @MFEM_PREFIX@
 MFEM_INC_DIR   = @MFEM_INC_DIR@
 MFEM_LIB_DIR   = @MFEM_LIB_DIR@
-MFEM_XLINKER   = @MFEM_XLINKER@

 # Location of test.mk
 MFEM_TEST_MK = @MFEM_TEST_MK@
@@ -99,7 +92,7 @@ MFEM_MPIEXEC_NP = @MFEM_MPIEXEC_NP@
 MFEM_MPI_NP     = @MFEM_MPI_NP@

 # The NVCC compiler cannot link with -x=cu
-MFEM_LINK_FLAGS := $(filter-out -x=cu -xcuda -xhip, $(MFEM_FLAGS))
+MFEM_LINK_FLAGS := $(filter-out -x=cu -xhip, $(MFEM_FLAGS))

 # Optional extra configuration
@MFEM_CONFIG_EXTRA@
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -19,11 +19,8 @@ if (NOT CMAKE_BUILD_TYPE)
 endif()

 # MFEM options. Set to mimic the default "defaults.mk" file.
-option(BUILD_SHARED_LIBS "Enable shared library build of MFEM" OFF)
 option(MFEM_USE_MPI "Enable MPI parallel build" OFF)
 option(MFEM_USE_METIS "Enable METIS usage" ${MFEM_USE_MPI})
-set(MFEM_PRECISION "double" CACHE STRING
-    "Floating-point precision to use: single, or double")
 option(MFEM_USE_EXCEPTIONS "Enable the use of exceptions" OFF)
 option(MFEM_USE_ZLIB "Enable zlib for compressed data streams." OFF)
 option(MFEM_USE_LIBUNWIND "Enable backtrace for errors." OFF)
@@ -40,10 +37,8 @@ option(MFEM_USE_MUMPS "Enable MUMPS usage" OFF)
 option(MFEM_USE_STRUMPACK "Enable STRUMPACK usage" OFF)
 option(MFEM_USE_GINKGO "Enable Ginkgo usage" OFF)
 option(MFEM_USE_AMGX "Enable AmgX usage" OFF)
-option(MFEM_USE_MAGMA "Enable MAGMA usage" OFF)
 option(MFEM_USE_GNUTLS "Enable GNUTLS usage" OFF)
 option(MFEM_USE_GSLIB "Enable GSLIB usage" OFF)
-option(MFEM_USE_HDF5 "Enable HDF5 usage" OFF)
 option(MFEM_USE_NETCDF "Enable NETCDF usage" OFF)
 option(MFEM_USE_PETSC "Enable PETSc support." OFF)
 option(MFEM_USE_SLEPC "Enable SLEPc support." OFF)
@@ -64,12 +59,10 @@ option(MFEM_USE_ADIOS2 "Enable ADIOS2" OFF)
 option(MFEM_USE_CALIPER "Enable Caliper support" OFF)
 option(MFEM_USE_ALGOIM "Enable Algoim support" OFF)
 option(MFEM_USE_MKL_CPARDISO "Enable MKL CPardiso" OFF)
-option(MFEM_USE_MKL_PARDISO "Enable MKL Pardiso" OFF)
 option(MFEM_USE_ADFORWARD "Enable forward mode for AD" OFF)
 option(MFEM_USE_CODIPACK "Enable automatic differentiation (AD) using CoDiPack" OFF)
 option(MFEM_USE_BENCHMARK "Enable Google Benchmark" OFF)
 option(MFEM_USE_PARELAG "Enable ParELAG" OFF)
-option(MFEM_USE_TRIBOL "Enable Tribol" OFF)
 option(MFEM_USE_ENZYME "Enable Enzyme" OFF)

 # Optional overrides for autodetected MPIEXEC and MPIEXEC_NUMPROC_FLAG
@@ -87,13 +80,7 @@ set(MFEM_MPI_NP 4 CACHE STRING "Number of processes used for MPI tests")
 option(MFEM_ENABLE_TESTING "Enable the ctest framework for testing" ON)
 option(MFEM_ENABLE_EXAMPLES "Build all of the examples" OFF)
 option(MFEM_ENABLE_MINIAPPS "Build all of the miniapps" OFF)
-option(MFEM_ENABLE_BENCHMARKS "Build all of the benchmarks" OFF)
-
-# Allow a user to specify fetching of certain third-party libraries instead of
-# searching for existing installations.
-option(FETCH_TPLS "Enable fetching of all supported third-party libraries" OFF)
-option(HYPRE_FETCH "Enable fetching of hypre" OFF)
-option(METIS_FETCH "Enable fetching of METIS" OFF)
+option(MFEM_ENABLE_GOOGLE_BENCHMARKS "Build all of the Google benchmarks" OFF)

 # Setting CXX/MPICXX on the command line or in user.cmake will overwrite the
 # autodetected C++ compiler.
@@ -117,7 +104,12 @@ set(HYPRE_DIR "${MFEM_DIR}/../hypre/src/hypre" CACHE PATH
 # If hypre was compiled to depend on BLAS and LAPACK:
 # set(HYPRE_REQUIRED_PACKAGES "BLAS" "LAPACK" CACHE STRING
 #     "Packages that HYPRE depends on.")
-# CUDA and HIP dependencies for HYPRE are handled in FindHYPRE.cmake.
+if (MFEM_USE_CUDA)
+   # This is only necessary when hypre is built with cuda:
+   set(HYPRE_REQUIRED_LIBRARIES "-lcusparse" "-lcurand" CACHE STRING
+       "Libraries that HYPRE depends on.")
+endif()
+# HIP dependency for HYPRE is handled in FindHYPRE.cmake.

 set(METIS_DIR "${MFEM_DIR}/../metis-4.0" CACHE PATH "Path to the METIS library.")

@@ -141,18 +133,16 @@ set(ParMETIS_DIR "${MFEM_DIR}/../parmetis-4.0.3" CACHE PATH
 set(ParMETIS_REQUIRED_PACKAGES "METIS" CACHE STRING
    "Additional packages required by ParMETIS.")

-set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_8.1.2" CACHE PATH
+set(SuperLUDist_DIR "${MFEM_DIR}/../SuperLU_DIST_6.3.1" CACHE PATH
    "Path to the SuperLU_DIST library.")
 # SuperLU_DIST may also depend on "OpenMP", depending on how it was compiled.
-set(SuperLUDist_REQUIRED_PACKAGES "MPI" "ParMETIS" "METIS"
-    "LAPACK" "BLAS" CACHE STRING
+set(SuperLUDist_REQUIRED_PACKAGES "MPI" "BLAS" "ParMETIS" CACHE STRING
    "Additional packages required by SuperLU_DIST.")

-set(MUMPS_DIR "${MFEM_DIR}/../MUMPS_5.5.0" CACHE PATH
+set(MUMPS_DIR "${MFEM_DIR}/../MUMPS_5.2.0" CACHE PATH
    "Path to the MUMPS library.")
-# MUMPS may also depend on "OpenMP", depending on how it was compiled.
-set(MUMPS_REQUIRED_PACKAGES "MPI" "MPI_Fortran" "ParMETIS" "METIS"
-    "ScaLAPACK" "LAPACK" "BLAS" CACHE STRING
+# Packages required by MUMPS, depending on how it was compiled.
+set(MUMPS_REQUIRED_PACKAGES "MPI" "BLAS" "METIS" "ScaLAPACK" CACHE STRING
    "Additional packages required by MUMPS.")
 # If the MPI package does not find all required Fortran libraries:
 # set(MUMPS_REQUIRED_LIBRARIES "gfortran" "mpi_mpifh" CACHE STRING
@@ -163,8 +153,7 @@ set(STRUMPACK_DIR "${MFEM_DIR}/../STRUMPACK-build" CACHE PATH
 # STRUMPACK may also depend on "OpenMP", depending on how it was compiled.
 # Starting with v2.2.0 of STRUMPACK, ParMETIS and Scotch are optional.
 set(STRUMPACK_REQUIRED_PACKAGES "MPI" "MPI_Fortran" "ParMETIS" "METIS"
-    "Scotch/ptscotch/ptscotcherr/scotch/scotcherr"
-    "ScaLAPACK" "LAPACK" "BLAS" CACHE STRING
+    "ScaLAPACK" "Scotch/ptscotch/ptscotcherr/scotch/scotcherr" CACHE STRING
    "Additional packages required by STRUMPACK.")
 # If the MPI package does not find all required Fortran libraries:
 # set(STRUMPACK_REQUIRED_LIBRARIES "gfortran" "mpi_mpifh" CACHE STRING
@@ -191,10 +180,6 @@ set(Ginkgo_DIR "${MFEM_DIR}/../ginkgo" CACHE PATH "Path to the Ginkgo library.")

 set(AMGX_DIR "${MFEM_DIR}/../amgx" CACHE PATH "Path to AmgX")

-set(MAGMA_DIR "${MFEM_DIR}/../magma" CACHE PATH "Path to MAGMA")
-set(MAGMA_REQUIRED_PACKAGES "BLAS" "LAPACK" CACHE STRING
-    "Additional packages required by MAGMA.")
-
 set(GNUTLS_DIR "" CACHE PATH "Path to the GnuTLS library.")

 set(GSLIB_DIR "" CACHE PATH "Path to the GSLIB library.")
@@ -225,15 +210,8 @@ set(CONDUIT_DIR "${MFEM_DIR}/../conduit" CACHE PATH

 set(AXOM_DIR "${MFEM_DIR}/../axom" CACHE PATH "Path to the Axom library.")
 # May need to add "Boost" as requirement.
-if (MFEM_USE_SIDRE)
-    if (MFEM_USE_MPI)
-        set(Axom_REQUIRED_PACKAGES "Conduit/blueprint/blueprint_mpi/relay/relay_mpi" CACHE STRING
-            "Additional packages required by Axom.")
-    elseif()
-        set(Axom_REQUIRED_PACKAGES "Conduit/blueprint/relay" CACHE STRING
-            "Additional packages required by Axom.")
-    endif()
-endif()
+set(Axom_REQUIRED_PACKAGES "Conduit/relay/blueprint" CACHE STRING
+    "Additional packages required by Axom.")

 set(PUMI_DIR "${MFEM_DIR}/../pumi-2.1.0" CACHE STRING
    "Directory where PUMI is installed")
@@ -247,16 +225,19 @@ set(MKL_CPARDISO_DIR "" CACHE STRING "MKL installation path.")
 set(MKL_MPI_WRAPPER_LIB "mkl_blacs_mpich_lp64" CACHE STRING "MKL MPI wrapper library")
 set(MKL_LIBRARY_DIR "" CACHE STRING "Custom library subdirectory")

-set(MKL_PARDISO_DIR "" CACHE STRING "MKL installation path.")
-
 set(OCCA_DIR "${MFEM_DIR}/../occa" CACHE PATH "Path to OCCA")
 set(RAJA_DIR "${MFEM_DIR}/../raja" CACHE PATH "Path to RAJA")
+# If RAJA is built with external CAMP:
+# set(RAJA_REQUIRED_PACKAGES "camp"
+#     CACHE STRING "Packages that RAJA depends on.")
+# set(camp_DIR "${MFEM_DIR}/../camp/lib/cmake/camp"
+#     CACHE PATH "Path to CAMP CMake files.")
 set(CEED_DIR "${MFEM_DIR}/../libCEED" CACHE PATH "Path to libCEED")
 set(UMPIRE_DIR "${MFEM_DIR}/../umpire" CACHE PATH "Path to Umpire")
 set(CALIPER_DIR "${MFEM_DIR}/../caliper" CACHE PATH "Path to Caliper")
 set(BLITZ_DIR "${MFEM_DIR}/../blitz" CACHE PATH "Path to Blitz")
 set(ALGOIM_DIR "${MFEM_DIR}/../algoim" CACHE PATH "Path to Algoim")
-set(Algoim_REQUIRED_PACKAGES "Blitz" CACHE STRING
+set(ALGOIM_REQUIRED_PACKAGES "BLITZ" CACHE STRING
    "Packages that ALGOIM depends on.")

 set(BENCHMARK_DIR "${MFEM_DIR}/../google-benchmark" CACHE PATH
@@ -270,12 +251,6 @@ set(PARELAG_INCLUDE_DIRS "${PARELAG_DIR}/src;${PARELAG_DIR}/build/src" CACHE
 set(PARELAG_LIBRARIES "${PARELAG_DIR}/build/src/libParELAG.a" CACHE STRING
    "The ParELAG library.")

-set(TRIBOL_DIR "${MFEM_DIR}/../tribol" CACHE PATH "Path to Tribol")
-set(Tribol_REQUIRED_PACKAGES "Axom/core/mint/slam/slic" CACHE STRING
-    "Additional packages required by Tribol")
-
-set(ENZYME_DIR "${MFEM_DIR}/../enzyme" CACHE PATH "Path to Enzyme")
-
 set(BLAS_INCLUDE_DIRS "" CACHE STRING "Path to BLAS headers.")
 set(BLAS_LIBRARIES "" CACHE STRING "The BLAS library.")
 set(LAPACK_INCLUDE_DIRS "" CACHE STRING "Path to LAPACK headers.")
@@ -1,4 +1,4 @@
-# Copyright (c) 2010-2025, Lawrence Livermore National Security, LLC. Produced
+# Copyright (c) 2010-2022, Lawrence Livermore National Security, LLC. Produced
 # at the Lawrence Livermore National Laboratory. All Rights reserved. See files
 # LICENSE and NOTICE for details. LLNL-CODE-806117.
 #
@@ -24,7 +24,7 @@ EGREP_BIN = $(shell command -v egrep 2> /dev/null)
 CXX = g++
 MPICXX = mpicxx

-BASE_FLAGS  = -std=c++17
+BASE_FLAGS  = -std=c++11
 OPTIM_FLAGS = -O3 $(BASE_FLAGS)
 DEBUG_FLAGS = -g $(XCOMPILER)-Wall $(BASE_FLAGS)

@@ -43,23 +43,12 @@ SHARED = NO

 # CUDA configuration options
 #
-# If you set MFEM_USE_ENZYME=YES, must use CUDA_CXX=clang++
+# If you set MFEM_USE_ENZYME=YES, CUDA_CXX has to be configured to use cuda with
+# clang as its host compiler.
 CUDA_CXX = nvcc
 CUDA_ARCH = sm_60
-# Base CUDA install directory, only needed if building with clang+cuda:
-# The default setting is:
-# 1. If CUDA_HOME is defined and non-empty, use that.
-# 2. If nvcc is in the path, use the directory two levels up from that.
-# 3. Use /usr/local/cuda
-CUDA_DIR = $(or $(CUDA_HOME),$(patsubst %/,%,$(dir \
- $(patsubst %/,%,$(dir $(shell command -v nvcc))))),/usr/local/cuda)
-# flags for clang+cuda
-CLANG_CUDA_FLAGS = -xcuda --cuda-path=$(CUDA_DIR) --cuda-gpu-arch=$(CUDA_ARCH)
-# flags for nvcc
-NVCC_FLAGS = -x=cu --expt-extended-lambda --expt-relaxed-constexpr \
- -arch=$(CUDA_ARCH) -isystem "$(CUDA_DIR)/include"
-# Prefixes for passing flags to the host compiler and linker when using
-# CUDA_CXX=nvcc
+CUDA_FLAGS = -x=cu --expt-extended-lambda -arch=$(CUDA_ARCH)
+# Prefixes for passing flags to the host compiler and linker when using CUDA_CXX
 CUDA_XCOMPILER = -Xcompiler=
 CUDA_XLINKER   = -Xlinker=

@@ -69,7 +58,7 @@ HIP_CXX = hipcc
 # example: gfx600 (tahiti), gfx700 (kaveri), gfx701 (hawaii), gfx801 (carrizo),
 # gfx900, gfx1010, etc.
 HIP_ARCH = gfx900
-HIP_FLAGS = --offload-arch=$(HIP_ARCH)
+HIP_FLAGS = --amdgpu-target=$(HIP_ARCH)
 HIP_XCOMPILER =
 HIP_XLINKER   = -Wl,

@@ -106,10 +95,6 @@ else
   # Silence unused command line argument warnings when generating dependencies
   # with mpicxx and clang
   DEP_FLAGS := -Wno-unused-command-line-argument $(DEP_FLAGS)
-   # Silence "ignoring duplicate libraries" warnings on new (Xcode 15) linker
-   ifneq (,$(findstring PROJECT:dyld,$(shell ld -v 2>&1)))
-      LDFLAGS_INTERNAL = -Xlinker -no_warn_duplicate_libraries
-   endif
 endif

 # Set CXXFLAGS to overwrite the default selection of DEBUG_FLAGS/OPTIM_FLAGS
@@ -135,7 +120,6 @@ MFEM_MPI_NP = 4
 MFEM_USE_MPI           = NO
 MFEM_USE_METIS         = $(MFEM_USE_MPI)
 MFEM_USE_METIS_5       = NO
-MFEM_PRECISION         = double
 MFEM_DEBUG             = NO
 MFEM_USE_EXCEPTIONS    = NO
 MFEM_USE_ZLIB          = NO
@@ -154,9 +138,7 @@ MFEM_USE_MUMPS         = NO
 MFEM_USE_STRUMPACK     = NO
 MFEM_USE_GINKGO        = NO
 MFEM_USE_AMGX          = NO
-MFEM_USE_MAGMA         = NO
 MFEM_USE_GNUTLS        = NO
-MFEM_USE_HDF5          = NO
 MFEM_USE_NETCDF        = NO
 MFEM_USE_PETSC         = NO
 MFEM_USE_SLEPC         = NO
@@ -178,27 +160,13 @@ MFEM_USE_UMPIRE        = NO
 MFEM_USE_SIMD          = NO
 MFEM_USE_ADIOS2        = NO
 MFEM_USE_MKL_CPARDISO  = NO
-MFEM_USE_MKL_PARDISO   = NO
 MFEM_USE_MOONOLITH     = NO
 MFEM_USE_ADFORWARD     = NO
 MFEM_USE_CODIPACK      = NO
 MFEM_USE_BENCHMARK     = NO
 MFEM_USE_PARELAG       = NO
-MFEM_USE_TRIBOL        = NO
 MFEM_USE_ENZYME        = NO

-# Process MFEM_PRECISION -> MFEM_USE_SINGLE, MFEM_USE_DOUBLE
-ifneq ($(filter double Double DOUBLE,$(MFEM_PRECISION)),)
-   MFEM_USE_DOUBLE = YES
-   MFEM_USE_SINGLE = NO
-else ifneq ($(filter single Single SINGLE,$(MFEM_PRECISION)),)
-   MFEM_USE_DOUBLE = NO
-   MFEM_USE_SINGLE = YES
-else ifeq ($(MAKECMDGOALS),config)
-   $(error Invalid floating-point precision: \
-     MFEM_PRECISION = $(MFEM_PRECISION))
-endif
-
 # MPI library compile and link flags
 # These settings are used only when building MFEM with MPI + HIP
 ifeq ($(MFEM_USE_MPI)$(MFEM_USE_HIP),YESYES)
@@ -238,7 +206,7 @@ HYPRE_OPT = -I$(HYPRE_DIR)/include
 HYPRE_LIB = -L$(HYPRE_DIR)/lib -lHYPRE
 ifeq (YES,$(MFEM_USE_CUDA))
   # This is only necessary when hypre is built with cuda:
-   HYPRE_LIB += -lcusolver -lcusparse -lcurand -lcublas
+   HYPRE_LIB += -lcusparse -lcurand -lcublas
 endif
 ifeq (YES,$(MFEM_USE_HIP))
   # This is only necessary when hypre is built with hip:
@@ -253,7 +221,7 @@ ifeq ($(MFEM_USE_SUPERLU)$(MFEM_USE_STRUMPACK)$(MFEM_USE_MUMPS),NONONO)
     METIS_OPT =
     METIS_LIB = -L$(METIS_DIR) -lmetis
   else
-     METIS_DIR = @MFEM_DIR@/../metis-5.1.0
+     METIS_DIR = @MFEM_DIR@/../metis-5.0
     METIS_OPT = -I$(METIS_DIR)/include
     METIS_LIB = -L$(METIS_DIR)/lib -lmetis
   endif
@@ -283,6 +251,10 @@ POSIX_CLOCKS_LIB = -lrt
 # For sundials_nvecmpiplusx and nvecparallel remember to build with MPI_ENABLE=ON
 # and modify cmake variables for hypre for sundials
 SUNDIALS_DIR = @MFEM_DIR@/../sundials-5.0.0/instdir
+# SUNDIALS >= 6.4.0 requires C++14:
+ifeq ($(MFEM_USE_SUNDIALS),YES)
+   BASE_FLAGS = -std=c++14
+endif
 SUNDIALS_OPT = -I$(SUNDIALS_DIR)/include
 SUNDIALS_LIB = $(XLINKER)-rpath,$(SUNDIALS_DIR)/lib64\
 $(XLINKER)-rpath,$(SUNDIALS_DIR)/lib\
@@ -294,16 +266,6 @@ endif
 ifeq ($(MFEM_USE_CUDA),YES)
   SUNDIALS_LIB += -lsundials_nveccuda
 endif
-ifeq ($(MFEM_USE_HIP),YES)
-   SUNDIALS_LIB += -lsundials_nvechip
-endif
-SUNDIALS_CORE_PAT = $(subst\
- @MFEM_DIR@,$(MFEM_DIR),$(SUNDIALS_DIR))/lib*/libsundials_core.*
-ifeq ($(MFEM_USE_SUNDIALS),YES)
-   ifneq ($(wildcard $(SUNDIALS_CORE_PAT)),)
-      SUNDIALS_LIB += -lsundials_core
-   endif
-endif
 # If SUNDIALS was built with KLU:
 # MFEM_USE_SUITESPARSE = YES

@@ -322,10 +284,10 @@ ifeq ($(MFEM_USE_SUPERLU5),YES)
   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib -L$(SUPERLU_DIR)/lib\
      -lsuperlu_dist_5.1.0
 else
-   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_8.1.2
+   SUPERLU_DIR = @MFEM_DIR@/../SuperLU_DIST_6.3.1
   SUPERLU_OPT = -I$(SUPERLU_DIR)/include
   SUPERLU_LIB = $(XLINKER)-rpath,$(SUPERLU_DIR)/lib64 -L$(SUPERLU_DIR)/lib64\
-      -lsuperlu_dist $(LAPACK_LIB)
+      -lsuperlu_dist -lblas
 endif

 # SCOTCH library configuration (required by STRUMPACK <= v2.1.0, optional in
@@ -349,45 +311,32 @@ MPI_FORTRAN_LIB = -lmpifort
 # MPI_FORTRAN_LIB += -lgfortran

 # MUMPS library configuration
-MUMPS_DIR = @MFEM_DIR@/../MUMPS_5.5.0
+MUMPS_DIR = @MFEM_DIR@/../MUMPS_5.2.0
 MUMPS_OPT = -I$(MUMPS_DIR)/include
-MUMPS_LIB = $(XLINKER)-rpath,$(MUMPS_DIR)/lib -L$(MUMPS_DIR)/lib
-ifeq ($(MFEM_USE_SINGLE),YES)
-   MUMPS_LIB += -lsmumps
-else
-   MUMPS_LIB += -ldmumps
-endif
-MUMPS_LIB += -lmumps_common -lpord $(SCALAPACK_LIB) $(LAPACK_LIB) $(MPI_FORTRAN_LIB)
+MUMPS_LIB = $(XLINKER)-rpath,$(MUMPS_DIR)/lib -L$(MUMPS_DIR)/lib -ldmumps\
+ -lmumps_common -lpord $(SCALAPACK_LIB) $(LAPACK_LIB) $(MPI_FORTRAN_LIB)

 # STRUMPACK library configuration
 STRUMPACK_DIR = @MFEM_DIR@/../STRUMPACK-build
+ifeq ($(MFEM_USE_STRUMPACK),YES)
+   BASE_FLAGS = -std=c++14
+endif
 STRUMPACK_OPT = -I$(STRUMPACK_DIR)/include $(SCOTCH_OPT)
 # If STRUMPACK was build with OpenMP support, the following may be need:
 # STRUMPACK_OPT += $(OPENMP_OPT)
 STRUMPACK_LIB = -L$(STRUMPACK_DIR)/lib -lstrumpack $(MPI_FORTRAN_LIB)\
 $(SCOTCH_LIB) $(SCALAPACK_LIB)

-# Ginkgo library configuration
+# Ginkgo library configuration (currently not needed)
 GINKGO_DIR = @MFEM_DIR@/../ginkgo/install
-GINKGO_SEARCH_DIR = $(subst @MFEM_DIR@,$(MFEM_DIR),$(GINKGO_DIR))
 GINKGO_BUILD_TYPE=Release
+ifeq ($(MFEM_USE_GINKGO),YES)
+   BASE_FLAGS = -std=c++14
+endif
 GINKGO_OPT = -isystem $(GINKGO_DIR)/include
-GINKGO_LIB_DIR = $(sort $(dir $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dll)))
-GINKGO_LINK_LIB_DIR = $(GINKGO_DIR)$(subst $(GINKGO_SEARCH_DIR),,$(GINKGO_LIB_DIR))
-ALL_GINKGO_LIBS_DEBUG = $(notdir $(basename $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*d.dll)))
-ALL_GINKGO_LIBS = $(notdir $(basename $(wildcard\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.a\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.so\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dylib\
- $(GINKGO_SEARCH_DIR)/lib*/libginkgo*.dll)))
+GINKGO_LIB_DIR = $(sort $(dir $(wildcard $(GINKGO_DIR)/lib*/libginkgo*.a  $(GINKGO_DIR)/lib*/libginkgo*.so $(GINKGO_DIR)/lib*/libginkgo*.dylib $(GINKGO_DIR)/lib*/libginkgo*.dll)))
+ALL_GINKGO_LIBS_DEBUG = $(notdir $(basename $(wildcard $(GINKGO_DIR)/lib*/libginkgo*d.a  $(GINKGO_DIR)/lib*/libginkgo*d.so $(GINKGO_DIR)/lib*/libginkgo*d.dylib $(GINKGO_DIR)/lib*/libginkgo*d.dll)))
+ALL_GINKGO_LIBS = $(notdir $(basename $(wildcard $(GINKGO_DIR)/lib*/libginkgo*.a  $(GINKGO_DIR)/lib*/libginkgo*.so $(GINKGO_DIR)/lib*/libginkgo*.dylib $(GINKGO_DIR)/lib*/libginkgo*.dll)))
 ALL_GINKGO_LIBS_RELEASE = $(filter-out $(ALL_GINKGO_LIBS_DEBUG),$(ALL_GINKGO_LIBS))
 GINKGO_LINK = $(subst libginkgo,-lginkgo,$(ALL_GINKGO_LIBS_RELEASE))
 ifeq ($(GINKGO_BUILD_TYPE),Debug)
@@ -396,31 +345,20 @@ ifeq ($(GINKGO_BUILD_TYPE),Debug)
  endif
 else
 endif
-GINKGO_LIB = $(XLINKER)-rpath,$(GINKGO_LINK_LIB_DIR) -L$(GINKGO_LINK_LIB_DIR)\
- $(GINKGO_LINK)
+GINKGO_LIB = $(XLINKER)-rpath,$(GINKGO_LIB_DIR) -L$(GINKGO_LIB_DIR) $(GINKGO_LINK)

 # AmgX library configuration
 AMGX_DIR = @MFEM_DIR@/../amgx
 AMGX_OPT = -I$(AMGX_DIR)/include
-AMGX_LIB = -L$(AMGX_DIR)/lib -lamgx -lcusparse -lcusolver -lcublas -lnvToolsExt
-
-# MAGMA library configuration
-MAGMA_DIR = @MFEM_DIR@/../magma
-MAGMA_OPT = -I$(MAGMA_DIR)/include
-MAGMA_LIB = -L$(MAGMA_DIR)/lib -l:libmagma.a -lcublas -lcusparse $(LAPACK_LIB)
+AMGX_LIB = -lcusparse -lcusolver -lcublas -lnvToolsExt -L$(AMGX_DIR)/lib -lamgx

 # GnuTLS library configuration
 GNUTLS_OPT =
 GNUTLS_LIB = -lgnutls

-# HDF5 library configuration
-HDF5_DIR   = $(HOME)/local
-HDF5_OPT = -I$(HDF5_DIR)/include
-HDF5_LIB = $(XLINKER)-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib -lhdf5_hl -lhdf5 \
-           $(ZLIB_LIB)
-
 # NetCDF library configuration
 NETCDF_DIR = $(HOME)/local
+HDF5_DIR   = $(HOME)/local
 NETCDF_OPT = -I$(NETCDF_DIR)/include -I$(HDF5_DIR)/include $(ZLIB_OPT)
 NETCDF_LIB = $(XLINKER)-rpath,$(NETCDF_DIR)/lib -L$(NETCDF_DIR)/lib\
 $(XLINKER)-rpath,$(HDF5_DIR)/lib -L$(HDF5_DIR)/lib\
@@ -501,8 +439,8 @@ SIDRE_LIB = \
 # Note that PUMI_DIR is needed -- it is used to check for gmi_sim.h
 PUMI_DIR = @MFEM_DIR@/../pumi-2.1.0
 PUMI_OPT = -I$(PUMI_DIR)/include
-PUMI_LIB = -L$(PUMI_DIR)/lib64 -L$(PUMI_DIR)/lib -lpumi -lcrv -lma -lmds -lapf\
-   -lpcu -lgmi -lparma -llion -lmth -lapf_zoltan -lspr
+PUMI_LIB = -L$(PUMI_DIR)/lib -lpumi -lcrv -lma -lmds -lapf -lpcu -lgmi -lparma\
+   -llion -lmth -lapf_zoltan -lspr

 # HIOP
 HIOP_DIR = @MFEM_DIR@/../hiop/install
@@ -521,14 +459,11 @@ GSLIB_LIB = -L$(GSLIB_DIR)/lib -lgs

 # CUDA library configuration
 CUDA_OPT =
-CUDA_LIB = -lcusparse -lcublas
-CLANG_CUDA_LIB = -L$(CUDA_DIR)/lib64 -L$(CUDA_DIR)/lib \
- $(XLINKER)-rpath,$(CUDA_DIR)/lib64,-rpath,$(CUDA_DIR)/lib \
- -lcudart -ldl -lrt -pthread
+CUDA_LIB = -lcusparse

 # HIP library configuration
 HIP_OPT =
-HIP_LIB = -L$(HIP_DIR)/lib $(XLINKER)-rpath,$(HIP_DIR)/lib -lhipsparse -lhipblas
+HIP_LIB = -L$(HIP_DIR)/lib $(XLINKER)-rpath,$(HIP_DIR)/lib -lhipsparse

 # OCCA library configuration
 OCCA_DIR = @MFEM_DIR@/../occa
@@ -549,11 +484,10 @@ ifdef GOTCHA_DIR
   CALIPER_LIB += $(XLINKER)-rpath,$(GOTCHA_DIR)/lib64 $(XLINKER)-rpath,$(GOTCHA_DIR)/lib -L$(GOTCHA_DIR)/lib64 -L$(GOTCHA_DIR)/lib -lgotcha
 endif

+
 # BLITZ library configuration
-# BLITZ_DIR must be the custom installation folder (-DCMAKE_INSTALL_PREFIX).
-BLITZ_DIR = @MFEM_DIR@/../blitz/install
+BLITZ_DIR = @MFEM_DIR@/../blitz
 BLITZ_OPT = -I$(BLITZ_DIR)/include
-# On intel machines, use /lib64 instead of /lib.
 BLITZ_LIB = $(XLINKER)-rpath,$(BLITZ_DIR)/lib -L$(BLITZ_DIR)/lib -lblitz

 # ALGOIM library configuration
@@ -577,22 +511,15 @@ RAJA_OPT = -I$(RAJA_DIR)/include
 ifdef CUB_DIR
   RAJA_OPT += -I$(CUB_DIR)
 endif
-
-CAMP_LIB = -lcamp
 ifdef CAMP_DIR
   RAJA_OPT += -I$(CAMP_DIR)/include
-   CAMP_LIB = $(XLINKER)-rpath,$(CAMP_DIR)/lib -L$(CAMP_DIR)/lib -lcamp
 endif
-RAJA_LIB = $(XLINKER)-rpath,$(RAJA_DIR)/lib -L$(RAJA_DIR)/lib -lRAJA $(CAMP_LIB)
+RAJA_LIB = $(XLINKER)-rpath,$(RAJA_DIR)/lib -L$(RAJA_DIR)/lib -lRAJA

 # UMPIRE library configuration
 UMPIRE_DIR = @MFEM_DIR@/../umpire
 UMPIRE_OPT = -I$(UMPIRE_DIR)/include $(if $(CAMP_DIR), -I$(CAMP_DIR)/include)
-UMPIRE_LIB = -L$(UMPIRE_DIR)/lib -L$(UMPIRE_DIR)/lib64 -lumpire $(CAMP_LIB)
-ifdef FMT_DIR
-   UMPIRE_OPT += -I$(FMT_DIR)/include
-   UMPIRE_LIB += -L$(FMT_DIR)/lib -L$(FMT_DIR)/lib64 -lfmt
-endif
+UMPIRE_LIB = -L$(UMPIRE_DIR)/lib -lumpire

 # MKL CPardiso library configuration
 MKL_CPARDISO_DIR ?=
@@ -603,41 +530,26 @@ MKL_CPARDISO_LIB = $(XLINKER)-rpath,$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
   -L$(MKL_CPARDISO_DIR)/$(MKL_LIBRARY_SUBDIR) -l$(MKL_MPI_WRAPPER)\
   -lmkl_intel_lp64 -lmkl_sequential -lmkl_core

-# MKL Pardiso library configuration
-MKL_PARDISO_DIR ?=
-MKL_LIBRARY_SUBDIR ?= lib
-MKL_PARDISO_OPT = -I$(MKL_PARDISO_DIR)/include
-MKL_PARDISO_LIB = $(XLINKER)-rpath,$(MKL_PARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
-   -L$(MKL_PARDISO_DIR)/$(MKL_LIBRARY_SUBDIR)\
-   -lmkl_intel_lp64 -lmkl_sequential -lmkl_core
-
 # PARELAG library configuration
 PARELAG_DIR = @MFEM_DIR@/../parelag
 PARELAG_OPT = -I$(PARELAG_DIR)/src -I$(PARELAG_DIR)/build/src
 PARELAG_LIB = -L$(PARELAG_DIR)/build/src -lParELAG

-# Tribol library configuration
-AXOM_DIR = @MFEM_DIR@/../axom
-TRIBOL_DIR = @MFEM_DIR@/../tribol
-TRIBOL_OPT = -I$(TRIBOL_DIR)/include -I$(AXOM_DIR)/include
-TRIBOL_LIB = -L$(TRIBOL_DIR)/lib -ltribol -lredecomp -L$(AXOM_DIR)/lib -laxom_mint\
-   -laxom_slam -laxom_slic -laxom_core
-
 # Enzyme configuration
-ENZYME_DIR = @MFEM_DIR@/../enzyme
-ENZYME_PLUGIN = $(abspath $(wildcard $(subst \
-   @MFEM_DIR@,$(MFEM_DIR),$(ENZYME_DIR))/lib/ClangEnzyme-*.$(SO_EXT)))
-ifeq ($(MAKECMDGOALS)-$(MFEM_USE_ENZYME),config-YES)
-   ifeq ($(ENZYME_PLUGIN),)
-      $(error Unable to find the Enzyme pluging! Please set ENZYME_DIR)
-   endif
-   ifneq ($(words $(ENZYME_PLUGIN)),1)
-      $(error Multiple versions of the Enzyme pluging found! \
-              Please set ENZYME_PLUGIN directly)
-   endif
-endif
-ENZYME_OPT = -fplugin=$(ENZYME_PLUGIN)
-ENZYME_LIB =
+
+# If you want to enable automatic differentiation at compile time, use the
+# options below, adapted to your configuration. To be more flexible, we
+# recommend using the Enzyme plugin during link time optimization. One option is
+# to add your options to the global compiler/linker flags like
+#
+# BASE_FLAGS += -flto
+# CXX_XLINKER += -fuse-ld=lld -Wl,--lto-legacy-pass-manager\
+#                -Wl,-mllvm=-load=$(ENZYME_DIR)/LLDEnzyme-$(ENZYME_VERSION).so -Wl,
+#
+ENZYME_DIR ?= @MFEM_DIR@/../enzyme
+ENZYME_VERSION ?= 14
+ENZYME_OPT = -fno-experimental-new-pass-manager -Xclang -load -Xclang $(ENZYME_DIR)/ClangEnzyme-$(ENZYME_VERSION).so
+ENZYME_LIB = ""

 # If YES, enable some informational messages
 VERBOSE = NO
@@ -19,7 +19,9 @@ RUN apt-get update && \
    apt-get install -y libcurl4-openssl-dev libssl-dev

 ENV PATH=$PATH:/opt/mfem-view/bin
+ENV LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/mfem-view/lib:/opt/mfem-view/lib64
 ENV DEBIAN_FRONTEND=noninteractive

 # The user will see the view on shell into the container
 WORKDIR /opt/mfem-view
+ENTRYPOINT ["/bin/bash"]
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Cosmin G. Petra	3ded358f84	fixed comment	2022-12-29 10:51:12 -08:00
Cosmin G. Petra	08de4f5e87	finished draft of interfaces and added "usage" examples	2022-12-29 10:43:33 -08:00
Cosmin G. Petra	3fe97ad740	sketch of the interfaces needed for contact solvers	2022-12-28 15:20:22 -08:00